there may be hidden Linux assumptions.
The tool assumes you have already built Palacios, the Linux embedding,
-and the Linux user-sapce tools. If you haven't done this, hit CTRL-C
+and the Linux user-space tools. If you haven't done this, hit CTRL-C
now, configure and build Palacios, the user-space tools, and run
-v3_config.pl.
+v3_config_v3vee.pl.
This tool also assumes that you have the environment produced by
-v3_config.pl sourced:
+v3_config_v3vee.pl sourced:
source ./ENV
print "We will include a classic MPTABLE constructor to describe your machine to the guest\n";
add_device(\%config, "MPTABLE", "mptable");
} else {
- if ($numcores>1 && is_palacios_core_feature_enabled($pdir,"V3_CONFIG_BOCHSBIOS")) {
+ if ($config{numcores}>1 && is_palacios_core_feature_enabled($pdir,"V3_CONFIG_BOCHSBIOS")) {
print "This is a multicore guest, and your Palacios configuration uses the classic BOCHS BIOS\n".
"but does not have the MPTABLE constructor enabled... This guest will almost\n".
"certainly fail to work. Do you want to continue anyway? [n] :";
do_storage(\%config, $pdir, $dir, $name, "pci0", "southbridge");
+
+
#
# Network interfaces (attached to PCI bus)
#
#
+# Sanity-check - is there something bootable?
+#
+#
+if (!($config{havecd} && !($config{havehd}))) {
+ print "The guest's storage configuration does not have either a CD or an HD. \n";
+ print "This means the guest BIOS will have nothing local to boot. \n";
+ if (!($config{havenic})) {
+ print "The guest also does does not have a NIC, which means the BIOS cannot\n";
+ print "do a network boot.\n";
+ } else {
+ print "The guest does have a NIC, so a network boot is possible, if the\n";
+ print "BIOS supports it.\n";
+ }
+ print "If this is not your intent, you probably want to CTRL-C and try again.\n";
+}
+
+print "The BIOS boot sequence will be set to CD,HD. If you need to change this\n";
+print "later, edit the <bootseq> block within the NVRAM device.\n";
+
+#
+# NVRAM
+#
+# Note: do_storage *must* have placed an IDE named ide0 in order for this to work
+#
+do_device(\%config, $pdir, "V3_CONFIG_NVRAM", "NVRAM", "nvram", 1, undef, " <storage>ide0</storage>\n <bootseq>cd,hd</bootseq>\n"); #must have
+
+#
#
# Generic Catch-all Device
#
close(PAL);
-print "\n\nYour guest is now ready in the directory $dir\n";
+print "\n\nYour guest is now ready in the directory $dir\n\n";
+print "To run it, do:\n\n";
+print " cd $dir\n";
+print " v3_create -b $name.pal $name\n";
+print " v3_launch /dev/v3-vmN (N given by v3_create)\n\n";
+print "Other useful tools:\n\n";
+print " v3_console (CGA console)\n";
+print " v3_stream (connect to stream, for example, serial port)\n\n";
exit;
print "The CGA and VGA options are mutually exclusive\n";
print "THe VGA and PARAGRAPH options are mutually exclusive\n";
- if (!($cancga || $canvga || $canserial || $canvirioconsole)) {
+ if (!($cancga || $canvga || $canserial || $canvirtioconsole)) {
print "Hmm... No console mechanism is enabled in your Palacios build...\n";
print " This is probably not what you want...\n";
-}
+ }
$didcga=0;
if ($cancga) {
}
}
- if (!($didcga || $didvga || $didserial || $didvirioconsole || $didparagraph)) {
+ if (!($didcga || $didvga || $didserial || $didvirtioconsole || $didparagraph)) {
print "You have configured your guest without any obvious way of interacting with it....\n";
print " This is probably not what you want...\n";
}
+
}
$host=get_user("eth0");
add_device($cr,"NIC_BRIDGE","net$num-back",undef,
" <frontend tag=\"net$num\" />\n".
- " <hostnic>$host</hostnic>\n");
+ " <hostnic name=\"$host\" />\n");
}
if ($back eq "vnet") {
}
$num++;
}
+
+ if ($num>0) {
+ $cr->{havenic}=1;
+ }
}
do_storage_backend($cr, $pdir, $dir, $name, "virtioblk$i", "data$i", "");
}
}
-}
+
+}
+
sub do_storage_backend {
print " * FILEDISK - the data is kept in a host file (common) : ".($canfiledisk ? "available" : "UNAVAILABLE")."\n";
print " * NETDISK - the data is accessed via the network (uncommon) : ".($cannetdisk ? "available" : "UNAVAILABLE")."\n";
print " * TMPDISK - the data is kept in memory and discarded (common) : ".($cantmpdisk ? "available" : "UNAVAILABLE")."\n";
- print " * RAMDISK - the data is kept in memory (common) : ".($canramdisk ? "available" : "UNAVAILABLE")."\n";
while (1) {
print "Which option do you want for this device? {".join(", ",@disks)."} [] : ";
$type = get_user("");
if ($what eq "cd") {
$attach.=" <model>V3VEE CDROM</model>\n".
" <type>CDROM</type>\n".$frontendblock;
+ $cr->{havecd}=1;
} else {
$attach.=" <model>V3VEE HD</model>\n".
" <type>HD</type>\n".$frontendblock;
+ $cr->{havehd}=1;
}
$attach.=" </frontend>\n";
