Palacios Public Git Repository

To checkout Palacios execute

  git clone http://v3vee.org/palacios/palacios.web/palacios.git
This will give you the master branch. You probably want the devel branch or one of the release branches. To switch to the devel branch, simply execute
  cd palacios
  git checkout --track -b devel origin/devel
The other branches are similar.


added barrier sync point to vmx
[palacios.git] / palacios / src / palacios / vmx.c
index e2e6d4b..11522f4 100644 (file)
@@ -31,6 +31,8 @@
 #include <palacios/vmm_direct_paging.h>
 #include <palacios/vmx_io.h>
 #include <palacios/vmx_msr.h>
+#include <palacios/vmm_decoder.h>
+#include <palacios/vmm_barrier.h>
 
 #include <palacios/vmx_ept.h>
 #include <palacios/vmx_assist.h>
@@ -758,7 +760,9 @@ int v3_vmx_enter(struct guest_info * info) {
     v3_update_timers(info);
 
     if (vmcs_store() != vmx_info->vmcs_ptr_phys) {
+       vmcs_clear(vmx_info->vmcs_ptr_phys);
        vmcs_load(vmx_info->vmcs_ptr_phys);
+       vmx_info->state = VMX_UNLAUNCHED;
     }
 
     v3_vmx_restore_vmcs(info);
@@ -786,6 +790,7 @@ int v3_vmx_enter(struct guest_info * info) {
     check_vmcs_write(VMCS_TSC_OFFSET_HIGH, tsc_offset_high);
     check_vmcs_write(VMCS_TSC_OFFSET, tsc_offset_low);
 
+
     if (v3_update_vmcs_host_state(info)) {
        v3_enable_ints();
         PrintError("Could not write host state\n");
@@ -795,6 +800,7 @@ int v3_vmx_enter(struct guest_info * info) {
 
     if (vmx_info->state == VMX_UNLAUNCHED) {
        vmx_info->state = VMX_LAUNCHED;
+
        info->vm_info->run_state = VM_RUNNING;
        ret = v3_vmx_launch(&(info->vm_regs), info, &(info->ctrl_regs));
     } else {
@@ -871,7 +877,7 @@ int v3_vmx_enter(struct guest_info * info) {
     v3_yield_cond(info);
 
     if (v3_handle_vmx_exit(info, &exit_info) == -1) {
-       PrintError("Error in VMX exit handler\n");
+       PrintError("Error in VMX exit handler (Exit reason=%x)\n", exit_info.exit_reason);
        return -1;
     }
 
@@ -916,11 +922,40 @@ int v3_start_vmx_guest(struct guest_info * info) {
        }
 
        if (v3_vmx_enter(info) == -1) {
+
+           addr_t host_addr;
+            addr_t linear_addr = 0;
+            
+            info->vm_info->run_state = VM_ERROR;
+            
+            V3_Print("VMX core %u: VMX ERROR!!\n", info->vcpu_id); 
+            
+            v3_print_guest_state(info);
+            
+            V3_Print("VMX core %u\n", info->vcpu_id); 
+
+            linear_addr = get_addr_linear(info, info->rip, &(info->segments.cs));
+            
+            if (info->mem_mode == PHYSICAL_MEM) {
+                v3_gpa_to_hva(info, linear_addr, &host_addr);
+            } else if (info->mem_mode == VIRTUAL_MEM) {
+                v3_gva_to_hva(info, linear_addr, &host_addr);
+            }
+            
+            V3_Print("VMX core %u: Host Address of rip = 0x%p\n", info->vcpu_id, (void *)host_addr);
+            
+            V3_Print("VMX core %u: Instr (15 bytes) at %p:\n", info->vcpu_id, (void *)host_addr);
+            v3_dump_mem((uint8_t *)host_addr, 15);
+            
+            v3_print_stack(info);
+
+
            v3_print_vmcs();
            print_exit_log(info);
            return -1;
        }
 
+       v3_wait_at_barrier(info);
 
 
        if (info->vm_info->run_state == VM_STOPPED) {
@@ -993,6 +1028,7 @@ int v3_reset_vmx_vm_core(struct guest_info * core, addr_t rip) {
 
 
 void v3_init_vmx_cpu(int cpu_id) {
+    addr_t vmx_on_region = 0;
 
     if (cpu_id == 0) {
        if (v3_init_vmx_hw(&hw_info) == -1) {
@@ -1005,17 +1041,18 @@ void v3_init_vmx_cpu(int cpu_id) {
 
 
     // Setup VMXON Region
-    host_vmcs_ptrs[cpu_id] = allocate_vmcs();
+    vmx_on_region = allocate_vmcs();
 
-    PrintDebug("VMXON pointer: 0x%p\n", (void *)host_vmcs_ptrs[cpu_id]);
 
-    if (vmx_on(host_vmcs_ptrs[cpu_id]) == VMX_SUCCESS) {
+    if (vmx_on(vmx_on_region) == VMX_SUCCESS) {
         V3_Print("VMX Enabled\n");
+       host_vmcs_ptrs[cpu_id] = vmx_on_region;
     } else {
-        PrintError("VMX initialization failure\n");
-        return;
+        V3_Print("VMX already enabled\n");
+       V3_FreePages((void *)vmx_on_region, 1);
     }
-    
+
+    PrintDebug("VMXON pointer: 0x%p\n", (void *)host_vmcs_ptrs[cpu_id]);    
 
     {
        struct vmx_sec_proc_ctrls sec_proc_ctrls;
@@ -1038,5 +1075,16 @@ void v3_init_vmx_cpu(int cpu_id) {
 void v3_deinit_vmx_cpu(int cpu_id) {
     extern v3_cpu_arch_t v3_cpu_types[];
     v3_cpu_types[cpu_id] = V3_INVALID_CPU;
-    V3_FreePages((void *)host_vmcs_ptrs[cpu_id], 1);
+
+    if (host_vmcs_ptrs[cpu_id] != 0) {
+       V3_Print("Disabling VMX\n");
+
+       if (vmx_off() != VMX_SUCCESS) {
+           PrintError("Error executing VMXOFF\n");
+       }
+
+       V3_FreePages((void *)host_vmcs_ptrs[cpu_id], 1);
+
+       host_vmcs_ptrs[cpu_id] = 0;
+    }
 }