#include <palacios/vmm_mem.h>
#include <palacios/vmm_hypercall.h>
#include <palacios/vmm_dev_mgr.h>
-#include <palacios/vmm_sym_iface.h>
+#include <palacios/vmm_cpuid.h>
+#include <palacios/vmm_xml.h>
+#include <palacios/vmm_io.h>
+#include <palacios/vmm_msr.h>
+#include <palacios/vmm_sprintf.h>
+
-#ifdef CONFIG_SYMBIOTIC_SWAP
-#include <palacios/vmm_sym_swap.h>
+#ifdef V3_CONFIG_SWAPPING
+#include <palacios/vmm_swapping.h>
#endif
-#include <devices/generic.h>
-#include <devices/ide.h>
-#include <devices/ram_cd.h>
-#include <devices/net_cd.h>
-#include <devices/ram_hd.h>
-#include <devices/net_hd.h>
+#ifdef V3_CONFIG_MULTIBOOT
+#include <palacios/vmm_multiboot.h>
+#endif
-#include <devices/telnet_cons.h>
-#include <devices/pci_passthrough.h>
+#ifdef V3_CONFIG_HVM
+#include <palacios/vmm_hvm.h>
+#endif
+#include <palacios/vmm_host_events.h>
+#include <palacios/vmm_perftune.h>
+#include "vmm_config_class.h"
-#include <palacios/vmm_host_events.h>
+/* The Palacios cookie encodes "v3vee" followed by a
+ 3 byte version code. There are currently two versions:
+
+ \0\0\0 => original (no checksum)
+ \0\0\1 => checksum
+*/
+#define COOKIE_LEN 8
+#define COOKIE_V0 "v3vee\0\0\0"
+#define COOKIE_V1 "v3vee\0\0\1"
+
+// This is used to access the configuration file index table
+struct file_hdr_v0 {
+ uint32_t index;
+ uint32_t size;
+ uint64_t offset;
+};
+
+struct file_hdr_v1 {
+ uint32_t index;
+ uint32_t size;
+ uint64_t offset;
+ ulong_t hash;
+};
+struct file_idx_table_v0 {
+ uint64_t num_files;
+ struct file_hdr_v0 hdrs[0];
+};
-#include <palacios/vmm_socket.h>
+struct file_idx_table_v1 {
+ uint64_t num_files;
+ struct file_hdr_v1 hdrs[0];
+};
-static int setup_memory_map(struct guest_info * info, struct v3_vm_config * config_ptr);
-static int setup_devices(struct guest_info * info, struct v3_vm_config * config_ptr);
-static int configure_generic(struct guest_info * info, struct v3_vm_config * config_ptr);
+static int setup_memory_map(struct v3_vm_info * vm, v3_cfg_tree_t * cfg);
+static int setup_extensions(struct v3_vm_info * vm, v3_cfg_tree_t * cfg);
+static int setup_devices(struct v3_vm_info * vm, v3_cfg_tree_t * cfg);
-#ifdef CONFIG_PASSTHROUGH_VIDEO
-static int passthrough_mem_write(addr_t guest_addr, void * src, uint_t length, void * priv_data) {
- return length;
- // memcpy((void*)guest_addr, src, length);
- PrintDebug("Write of %d bytes to %p\n", length, (void *)guest_addr);
- PrintDebug("Write Value = %p\n", (void *)*(addr_t *)src);
+
+char * v3_cfg_val(v3_cfg_tree_t * tree, char * tag) {
+ char * attrib = (char *)v3_xml_attr(tree, tag);
+ v3_cfg_tree_t * child_entry = v3_xml_child(tree, tag);
+ char * val = NULL;
+
+ if ((child_entry != NULL) && (attrib != NULL)) {
+ PrintError(VM_NONE, VCORE_NONE, "Duplicate Configuration parameters present for %s\n", tag);
+ return NULL;
+ }
+
+ if (attrib == NULL) {
+ val = v3_xml_txt(child_entry);
+
+ if ( val[0] == 0 )
+ val = NULL;
+ } else {
+ val = attrib;
+ }
- return length;
+ return val;
}
-#endif
-int v3_pre_config_guest(struct guest_info * info, struct v3_vm_config * config_ptr) {
- extern v3_cpu_arch_t v3_cpu_types[];
+v3_cfg_tree_t * v3_cfg_subtree(v3_cfg_tree_t * tree, char * tag) {
+ return v3_xml_child(tree, tag);
+}
- // Amount of ram the Guest will have, rounded to a 4K page boundary
- info->mem_size = config_ptr->mem_size & ~(addr_t)0xfff;
+v3_cfg_tree_t * v3_cfg_next_branch(v3_cfg_tree_t * tree) {
+ return v3_xml_next(tree);
+}
- info->cpu_id = config_ptr->guest_cpu;
- /*
- * Initialize the subsystem data strutures
- */
-#ifdef CONFIG_TELEMETRY
- // This should go first, because other subsystems will depend on the guest_info flag
- if (config_ptr->enable_telemetry) {
- info->enable_telemetry = 1;
- v3_init_telemetry(info);
+
+struct v3_cfg_file * v3_cfg_get_file(struct v3_vm_info * vm, char * tag) {
+ struct v3_cfg_file * file = NULL;
+
+ file = (struct v3_cfg_file *)v3_htable_search(vm->cfg_data->file_table, (addr_t)tag);
+
+ return file;
+}
+
+
+static uint_t file_hash_fn(addr_t key) {
+ char * name = (char *)key;
+ return v3_hash_buffer((uchar_t *)name, strlen(name));
+}
+
+static int file_eq_fn(addr_t key1, addr_t key2) {
+ char * name1 = (char *)key1;
+ char * name2 = (char *)key2;
+
+ return (strcmp(name1, name2) == 0);
+}
+
+static struct v3_config * parse_config(void * cfg_blob) {
+ struct v3_config * cfg = NULL;
+ int offset = 0;
+ uint_t xml_len = 0;
+ struct file_idx_table_v0 * files_v0 = NULL;
+ struct file_idx_table_v1 * files_v1 = NULL;
+ v3_cfg_tree_t * file_tree = NULL;
+ int version=-1;
+
+ V3_Print(VM_NONE, VCORE_NONE, "cfg data at %p\n", cfg_blob);
+
+ if (memcmp(cfg_blob, COOKIE_V0, COOKIE_LEN) == 0) {
+ version = 0;
+ } else if (memcmp(cfg_blob, COOKIE_V1, COOKIE_LEN) == 0) {
+ version = 1;
} else {
- info->enable_telemetry = 0;
+ PrintError(VM_NONE, VCORE_NONE, "Invalid Configuration Header Or Unknown Version\n");
+ return NULL;
+ }
+
+ V3_Print(VM_NONE, VCORE_NONE, "Handling Palacios Image Format, Version 0x%x\n",version);
+
+ offset += COOKIE_LEN;
+
+ cfg = (struct v3_config *)V3_Malloc(sizeof(struct v3_config));
+
+ if (!cfg) {
+ PrintError(VM_NONE, VCORE_NONE, "Unable to allocate while parsing\n");
+ return NULL;
}
-#endif
- v3_init_hypercall_map(info);
- v3_init_io_map(info);
- v3_init_msr_map(info);
- v3_init_host_events(info);
+ memset(cfg, 0, sizeof(struct v3_config));
+
+ cfg->blob = cfg_blob;
+ INIT_LIST_HEAD(&(cfg->file_list));
+ cfg->file_table = v3_create_htable(0, file_hash_fn, file_eq_fn);
- // Initialize the memory map
- v3_init_shadow_map(info);
+ if (!(cfg->file_table)) {
+ PrintError(VM_NONE, VCORE_NONE, "Unable to allocate hash table while parsing\n");
+ V3_Free(cfg);
+ return NULL;
+ }
- if ((v3_cpu_types[info->cpu_id] == V3_SVM_REV3_CPU) &&
- (config_ptr->enable_nested_paging == 1)) {
- PrintDebug("Guest Page Mode: NESTED_PAGING\n");
- info->shdw_pg_mode = NESTED_PAGING;
+ xml_len = *(uint32_t *)(cfg_blob + offset);
+ offset += 4;
+
+ cfg->cfg = (v3_cfg_tree_t *)v3_xml_parse((uint8_t *)(cfg_blob + offset));
+ offset += xml_len;
+
+ offset += 8;
+
+ // This is hideous, but the file formats are still very close
+ if (version==0) {
+ files_v0 = (struct file_idx_table_v0 *)(cfg_blob + offset);
+ V3_Print(VM_NONE, VCORE_NONE, "Number of files in cfg: %d\n", (uint32_t)(files_v0->num_files));
} else {
- PrintDebug("Guest Page Mode: SHADOW_PAGING\n");
- v3_init_shadow_page_state(info);
- info->shdw_pg_mode = SHADOW_PAGING;
+ files_v1 = (struct file_idx_table_v1 *)(cfg_blob + offset);
+ V3_Print(VM_NONE, VCORE_NONE, "Number of files in cfg: %d\n", (uint32_t)(files_v1->num_files));
}
- v3_init_sym_iface(info);
- v3_init_time(info);
- v3_init_interrupt_state(info);
- v3_init_exception_state(info);
- v3_init_dev_mgr(info);
- v3_init_decoder(info);
-
-#ifdef CONFIG_SYMBIOTIC_SWAP
- PrintDebug("initializing symbiotic swap\n");
- v3_init_sym_swap(info);
-#endif
+ file_tree = v3_cfg_subtree(v3_cfg_subtree(cfg->cfg, "files"), "file");
+ while (file_tree) {
+ char * id = v3_cfg_val(file_tree, "id");
+ char * index = v3_cfg_val(file_tree, "index");
+ int idx = atoi(index);
+ struct v3_cfg_file * file = NULL;
- if (config_ptr->schedule_freq == 0) {
- // set the schedule frequency to 100 HZ
- config_ptr->schedule_freq = 100;
+ file = (struct v3_cfg_file *)V3_Malloc(sizeof(struct v3_cfg_file));
+
+ if (!file) {
+ PrintError(VM_NONE, VCORE_NONE, "Could not allocate file structure\n");
+ v3_free_htable(cfg->file_table,0,0);
+ V3_Free(cfg);
+ return NULL;
+ }
+
+ V3_Print(VM_NONE, VCORE_NONE, "File index=%d id=%s\n", idx, id);
+
+ strncpy(file->tag, id, V3_MAX_TAG_LEN);
+ file->tag[V3_MAX_TAG_LEN-1] = 0 ;
+
+ if (version==0) {
+ struct file_hdr_v0 * hdr = &(files_v0->hdrs[idx]);
+
+ file->size = hdr->size;
+ file->data = cfg_blob + hdr->offset;
+ file->hash = 0;
+
+ V3_Print(VM_NONE, VCORE_NONE, "Storing file data offset = %d, size=%d\n", (uint32_t)hdr->offset, hdr->size);
+ V3_Print(VM_NONE, VCORE_NONE, "file data at %p\n", file->data);
+
+ } else if (version==1) {
+ struct file_hdr_v1 * hdr = &(files_v1->hdrs[idx]);
+ unsigned long hash;
+
+ file->size = hdr->size;
+ file->data = cfg_blob + hdr->offset;
+ file->hash = hdr->hash;
+
+ V3_Print(VM_NONE, VCORE_NONE, "Storing file data offset = %d, size=%d\n", (uint32_t)hdr->offset, hdr->size);
+ V3_Print(VM_NONE, VCORE_NONE, "file data at %p\n", file->data);
+ V3_Print(VM_NONE, VCORE_NONE, "Checking file data integrity...\n");
+ if ((hash = v3_hash_buffer(file->data, file->size)) != file->hash) {
+ PrintError(VM_NONE, VCORE_NONE, "File data corrupted! (orig hash=0x%lx, new=0x%lx\n",
+ file->hash, hash);
+ return NULL;
+ }
+ V3_Print(VM_NONE, VCORE_NONE, "File data OK\n");
+
+ }
+
+
+ list_add( &(file->file_node), &(cfg->file_list));
+
+ V3_Print(VM_NONE, VCORE_NONE, "Keying file to name\n");
+ v3_htable_insert(cfg->file_table, (addr_t)(file->tag), (addr_t)(file));
+
+ V3_Print(VM_NONE, VCORE_NONE, "Iterating to next file\n");
+
+ file_tree = v3_cfg_next_branch(file_tree);
}
- PrintDebug("CPU_KHZ = %d, schedule_freq=%p\n", V3_CPU_KHZ(), (void *)config_ptr->schedule_freq);
+ V3_Print(VM_NONE, VCORE_NONE, "Configuration parsed successfully\n");
+
+ return cfg;
+}
+
+
+static inline uint32_t get_alignment(char * align_str) {
+ // default is 4KB alignment
+ uint32_t alignment = PAGE_SIZE_4KB;
- info->yield_cycle_period = (V3_CPU_KHZ() * 1000) / config_ptr->schedule_freq;
+ if (align_str != NULL) {
+ if (strcasecmp(align_str, "2MB") == 0) {
+ alignment = PAGE_SIZE_2MB;
+ } else if (strcasecmp(align_str, "4MB") == 0) {
+ alignment = PAGE_SIZE_4MB;
+ }
+ }
- // Initial CPU operating mode
- info->cpu_mode = REAL;
- info->mem_mode = PHYSICAL_MEM;
+#ifndef V3_CONFIG_ALIGNED_PG_ALLOC
+ if (alignment != PAGE_SIZE_4KB) {
+ PrintError(VM_NONE, VCORE_NONE, "Aligned page allocations are not supported in this host (requested alignment=%d)\n", alignment);
+ PrintError(VM_NONE, VCORE_NONE, "Ignoring alignment request\n");
+ alignment = PAGE_SIZE_4KB;
+ }
+#endif
- return 0;
+ return alignment;
}
-int v3_post_config_guest(struct guest_info * info, struct v3_vm_config * config_ptr) {
- // Configure the memory map for the guest
- if (setup_memory_map(info, config_ptr) == -1) {
- PrintError("Setting up guest memory map failed...\n");
+static int pre_config_vm(struct v3_vm_info * vm, v3_cfg_tree_t * vm_cfg) {
+ char * memory_str = v3_cfg_val(vm_cfg, "memory");
+ char * schedule_hz_str = v3_cfg_val(vm_cfg, "schedule_hz");
+ char * vm_class = v3_cfg_val(vm_cfg, "class");
+ char * align_str = v3_cfg_val(v3_cfg_subtree(vm_cfg, "memory"), "alignment");
+ uint32_t sched_hz = 100; // set the schedule frequency to 100 HZ
+
+
+ if (!memory_str) {
+ PrintError(VM_NONE, VCORE_NONE, "Memory is a required configuration parameter\n");
return -1;
}
- //v3_hook_io_port(info, 1234, &IO_Read, NULL, info);
-
- if (setup_devices(info, config_ptr) == -1) {
- PrintError("Failed to setup devices\n");
+ PrintDebug(VM_NONE, VCORE_NONE, "Memory=%s\n", memory_str);
+ if (align_str) {
+ PrintDebug(VM_NONE, VCORE_NONE, "Alignment=%s\n", align_str);
+ } else {
+ PrintDebug(VM_NONE, VCORE_NONE, "Alignment defaulted to 4KB.\n");
+ }
+
+ // Amount of ram the Guest will have, always in MB
+ vm->mem_size = (addr_t)atoi(memory_str) * 1024 * 1024;
+ vm->mem_align = get_alignment(align_str);
+
+ // set up defaults for memory management for threads associated
+ // with this VM
+ vm->resource_control.pg_alignment=vm->mem_align;
+ vm->resource_control.pg_node_id=-1;
+
+#ifdef V3_CONFIG_SWAPPING
+ if (v3_init_swapping_vm(vm,vm_cfg)) {
+ PrintError(vm,VCORE_NONE,"Unable to initialize swapping correctly\n");
return -1;
}
+ if (vm->swap_state.enable_swapping) {
+ PrintDebug(vm,VCORE_NONE,"Swapping enabled\n");
+ } else {
+ PrintDebug(vm,VCORE_NONE,"Swapping disabled\n");
+ }
+#endif
+
+ PrintDebug(VM_NONE, VCORE_NONE, "Alignment for %lu bytes of memory computed as 0x%x\n", vm->mem_size, vm->mem_align);
- v3_print_io_map(info);
- v3_print_msr_map(info);
+ if (strcasecmp(vm_class, "PC") == 0) {
+ vm->vm_class = V3_PC_VM;
+ } else {
+ PrintError(VM_NONE, VCORE_NONE, "Invalid VM class\n");
+ return -1;
+ }
- info->run_state = VM_STOPPED;
+#ifdef V3_CONFIG_TELEMETRY
+ {
+ char * telemetry = v3_cfg_val(vm_cfg, "telemetry");
+
+ // This should go first, because other subsystems will depend on the guest_info flag
+ if ((telemetry) && (strcasecmp(telemetry, "enable") == 0)) {
+ vm->enable_telemetry = 1;
+ } else {
+ vm->enable_telemetry = 0;
+ }
+ }
+#endif
- info->vm_regs.rdi = 0;
- info->vm_regs.rsi = 0;
- info->vm_regs.rbp = 0;
- info->vm_regs.rsp = 0;
- info->vm_regs.rbx = 0;
- info->vm_regs.rdx = 0;
- info->vm_regs.rcx = 0;
- info->vm_regs.rax = 0;
+ if (v3_init_vm(vm) == -1) {
+ PrintError(VM_NONE, VCORE_NONE, "Failed to initialize VM\n");
+ return -1;
+ }
+#ifdef V3_CONFIG_MULTIBOOT
+ if (v3_init_multiboot_vm(vm,vm_cfg)) {
+ PrintError(vm,VCORE_NONE,"Cannot initialize Multiboot for VM\n");
+ return -1;
+ }
+#endif
+#ifdef V3_CONFIG_HVM
+ if (v3_init_hvm_vm(vm,vm_cfg)) {
+ PrintError(vm,VCORE_NONE,"Cannot initialize HVM for VM\n");
+ return -1;
+ }
+#endif
+
+ if (schedule_hz_str) {
+ sched_hz = atoi(schedule_hz_str);
+ }
+
+ PrintDebug(VM_NONE, VCORE_NONE, "CPU_KHZ = %d, schedule_freq=%p\n", V3_CPU_KHZ(),
+ (void *)(addr_t)sched_hz);
+
+ vm->yield_cycle_period = (V3_CPU_KHZ() * 1000) / sched_hz;
+
return 0;
}
+static int determine_paging_mode(struct guest_info * info, v3_cfg_tree_t * core_cfg) {
+ extern v3_cpu_arch_t v3_mach_type;
+
+ v3_cfg_tree_t * vm_tree = info->vm_info->cfg_data->cfg;
+ v3_cfg_tree_t * pg_tree = v3_cfg_subtree(vm_tree, "paging");
+ char * pg_mode = v3_cfg_val(pg_tree, "mode");
+
+ PrintDebug(info->vm_info, info, "Paging mode specified as %s\n", pg_mode);
+
+ if (pg_mode) {
+ if ((strcasecmp(pg_mode, "nested") == 0)) {
+ // we assume symmetric cores, so if core 0 has nested paging they all do
+ if ((v3_mach_type == V3_SVM_REV3_CPU) ||
+ (v3_mach_type == V3_VMX_EPT_CPU) ||
+ (v3_mach_type == V3_VMX_EPT_UG_CPU)) {
+
+ V3_Print(info->vm_info, info, "Setting paging mode to NESTED\n");
+ info->shdw_pg_mode = NESTED_PAGING;
+ } else {
+ PrintError(info->vm_info, info, "Nested paging not supported on this hardware. Defaulting to shadow paging\n");
+ info->shdw_pg_mode = SHADOW_PAGING;
+ }
+ } else if ((strcasecmp(pg_mode, "shadow") == 0)) {
+ V3_Print(info->vm_info, info, "Setting paging mode to SHADOW\n");
+ info->shdw_pg_mode = SHADOW_PAGING;
+ } else {
+ PrintError(info->vm_info, info, "Invalid paging mode (%s) specified in configuration. Defaulting to shadow paging\n", pg_mode);
+ info->shdw_pg_mode = SHADOW_PAGING;
+ }
+ } else {
+ V3_Print(info->vm_info, info, "No paging type specified in configuration. Defaulting to shadow paging\n");
+ info->shdw_pg_mode = SHADOW_PAGING;
+ }
+
+
+ if (v3_cfg_val(pg_tree, "large_pages") != NULL) {
+ if (strcasecmp(v3_cfg_val(pg_tree, "large_pages"), "true") == 0) {
+ info->use_large_pages = 1;
+ PrintDebug(info->vm_info, info, "Use of large pages in memory virtualization enabled.\n");
+ }
+ }
+ return 0;
+}
+static int pre_config_core(struct guest_info * info, v3_cfg_tree_t * core_cfg) {
+ if (determine_paging_mode(info, core_cfg) != 0) {
+ return -1;
+ }
+ if (v3_init_core(info) == -1) {
+ PrintError(info->vm_info, info, "Error Initializing Core\n");
+ return -1;
+ }
-/* TODO:
- * The amount of guest memory is stored in info->mem_size
- * We need to make sure the memory map extends to cover it
- */
-static int setup_memory_map(struct guest_info * info, struct v3_vm_config * config_ptr) {
+#ifdef V3_CONFIG_MULTIBOOT
+ if (v3_init_multiboot_core(info)) {
+ PrintError(info->vm_info, info, "Error Initializing Multiboot Core\n");
+ return -1;
+ }
+#endif
+#ifdef V3_CONFIG_HVM
+ if (v3_init_hvm_core(info)) {
+ PrintError(info->vm_info, info, "Error Initializing HVM Core\n");
+ return -1;
+ }
+#endif
-#ifdef CONFIG_PASSTHROUGH_VIDEO
- PrintDebug("Setting up memory map (memory size=%dMB)\n", (uint_t)(info->mem_size / (1024 * 1024)));
-
- // VGA frame buffer
- if (1) {
- if (v3_add_shadow_mem(info, 0xa0000, 0xc0000, 0xa0000) == -1) {
- PrintError("Could not map VGA framebuffer\n");
+ if (info->vm_info->vm_class == V3_PC_VM) {
+ if (pre_config_pc_core(info, core_cfg) == -1) {
+ PrintError(info->vm_info, info, "PC Post configuration failure\n");
return -1;
}
} else {
- v3_hook_write_mem(info, 0xa0000, 0xc0000, 0xa0000, passthrough_mem_write, NULL);
+ PrintError(info->vm_info, info, "Invalid VM Class\n");
+ return -1;
}
-#endif
-#define VGABIOS_START 0x000c0000
-#define ROMBIOS_START 0x000f0000
+ return 0;
+}
- /* layout vgabios */
- {
- extern uint8_t v3_vgabios_start[];
- extern uint8_t v3_vgabios_end[];
- addr_t vgabios_dst = v3_get_shadow_addr(&(info->mem_map.base_region), VGABIOS_START);
- memcpy(V3_VAddr((void *)vgabios_dst), v3_vgabios_start, v3_vgabios_end - v3_vgabios_start);
- }
+
+static int post_config_vm(struct v3_vm_info * vm, v3_cfg_tree_t * cfg) {
- /* layout rombios */
- {
- extern uint8_t v3_rombios_start[];
- extern uint8_t v3_rombios_end[];
- addr_t rombios_dst = v3_get_shadow_addr(&(info->mem_map.base_region), ROMBIOS_START);
- memcpy(V3_VAddr((void *)rombios_dst), v3_rombios_start, v3_rombios_end - v3_rombios_start);
+
+ // Configure the memory map for the guest
+ if (setup_memory_map(vm, cfg) == -1) {
+ PrintError(vm, VCORE_NONE,"Setting up guest memory map failed...\n");
+ return -1;
}
-#ifdef CONFIG_CRAY_XT
- {
-#define SEASTAR_START 0xffe00000
-#define SEASTAR_END 0xffffffff
- // Map the Seastar straight through
- if (v3_add_shadow_mem(info, SEASTAR_START, SEASTAR_END, SEASTAR_START) == -1) {
- PrintError("Could not map through the seastar\n");
+
+ if (vm->vm_class == V3_PC_VM) {
+ if (post_config_pc(vm, cfg) == -1) {
+ PrintError(vm, VCORE_NONE,"PC Post configuration failure\n");
return -1;
}
+ } else {
+ PrintError(vm, VCORE_NONE,"Invalid VM Class\n");
+ return -1;
}
-#endif
- v3_print_mem_map(info);
+
+
+ // Initialize fw_cfg state for VMM<->VM SEABIOS communication
+ if (v3_fw_cfg_init(vm) == -1) {
+ PrintError(vm, VCORE_NONE, "Error initializing Firmware Config (fw_cfg) state\n");
+ return -1;
+ }
+
+ /*
+ * Initialize configured devices
+ */
+ if (setup_devices(vm, cfg) == -1) {
+ PrintError(vm, VCORE_NONE,"Failed to setup devices\n");
+ return -1;
+ }
+
+
+ // v3_print_io_map(info);
+ v3_print_msr_map(vm);
+
+
+
+
+ /*
+ * Initialize configured extensions
+ */
+ if (setup_extensions(vm, cfg) == -1) {
+ PrintError(vm, VCORE_NONE,"Failed to setup extensions\n");
+ return -1;
+ }
+
+ if (v3_setup_performance_tuning(vm, cfg) == -1) {
+ PrintError(vm, VCORE_NONE,"Failed to configure performance tuning parameters\n");
+ return -1;
+ }
+
+
+ vm->run_state = VM_STOPPED;
return 0;
}
-static int setup_devices(struct guest_info * info, struct v3_vm_config * config_ptr) {
+static int post_config_core(struct guest_info * info, v3_cfg_tree_t * cfg) {
- v3_create_device(info, "8259A", NULL);
- v3_create_device(info, "KEYBOARD", NULL);
- v3_create_device(info, "8254_PIT", NULL);
- v3_create_device(info, "BOCHS_DEBUG", NULL);
- v3_create_device(info, "OS_DEBUG", NULL);
- v3_create_device(info, "LAPIC", NULL);
- v3_create_device(info, "IOAPIC", "LAPIC");
- v3_create_device(info, "VMNET", NULL);
-
+
+ if (v3_init_core_extensions(info) == -1) {
+ PrintError(info->vm_info, info, "Error intializing extension core states\n");
+ return -1;
+ }
- v3_create_device(info, "CGA_VIDEO", (void *)1);
- {
- struct telnet_cons_cfg cons_cfg = {"CGA_VIDEO", 19997};
- v3_create_device(info, "TELNET_CONSOLE", &cons_cfg);
+ if (info->vm_info->vm_class == V3_PC_VM) {
+ if (post_config_pc_core(info, cfg) == -1) {
+ PrintError(info->vm_info, info, "PC Post configuration failure\n");
+ return -1;
+ }
+ } else {
+ PrintError(info->vm_info, info, "Invalid VM Class\n");
+ return -1;
}
- if (config_ptr->enable_pci == 1) {
- struct ide_cfg ide_config = {"PCI", "PIIX3"};
- struct pci_passthrough_cfg pci_pt_cfg = {"PCI", "E1000", 0x8086, 0x100e};
-
- v3_create_device(info, "PCI", NULL);
- v3_create_device(info, "i440FX", "PCI");
- v3_create_device(info, "PIIX3", "PCI");
-
- v3_create_device(info, "LNX_VIRTIO_SYM", "PCI");
- v3_create_device(info, "LNX_VIRTIO_BLK", "PCI");
- v3_create_device(info, "LNX_VIRTIO_BALLOON", "PCI");
- v3_create_device(info, "SYM_SWAP", "LNX_VIRTIO_BLK");
+ return 0;
+}
- v3_create_device(info, "IDE", &ide_config);
-
- v3_create_device(info, "PCI_PASSTHROUGH", &pci_pt_cfg);
- } else {
- v3_create_device(info, "IDE", NULL);
+
+static struct v3_vm_info * allocate_guest(int num_cores) {
+ int guest_state_size = sizeof(struct v3_vm_info) + (sizeof(struct guest_info) * num_cores);
+ struct v3_vm_info * vm = V3_Malloc(guest_state_size);
+
+ if (!vm) {
+ PrintError(VM_NONE, VCORE_NONE, "Unable to allocate space for guest data structures\n");
+ return NULL;
}
+ int i = 0;
- if (config_ptr->pri_disk_type != NONE) {
- if (config_ptr->pri_disk_type == CDROM) {
- if (config_ptr->pri_disk_con == RAM) {
- struct ram_cd_cfg cfg = {"IDE", 0, 0,
- (addr_t)(config_ptr->pri_disk_info.ram.data_ptr),
- config_ptr->pri_disk_info.ram.size};
+ memset(vm, 0, guest_state_size);
- PrintDebug("Creating RAM CD\n");
+ vm->num_cores = num_cores;
- v3_create_device(info, "RAM-CD", &cfg);
- } else if (config_ptr->pri_disk_con == NETWORK) {
- struct net_cd_cfg cfg = {"IDE", 0, 0,
- config_ptr->pri_disk_info.net.ip_str,
- config_ptr->pri_disk_info.net.port,
- config_ptr->pri_disk_info.net.disk_name};
- PrintDebug("Creating NET CD\n");
+ for (i = 0; i < num_cores; i++) {
+ vm->cores[i].core_run_state = CORE_INVALID;
+ }
- v3_create_device(info, "NET-CD", &cfg);
- }
- } else if (config_ptr->pri_disk_type == HARDDRIVE) {
- if (config_ptr->pri_disk_con == RAM) {
- struct ram_hd_cfg cfg = {"IDE", 0, 0,
- (addr_t)(config_ptr->pri_disk_info.ram.data_ptr),
- config_ptr->pri_disk_info.ram.size};
-
- PrintDebug("Creating RAM HD\n");
-
- v3_create_device(info, "RAM-HD", &cfg);
- } else if (config_ptr->pri_disk_con == NETWORK) {
- struct net_hd_cfg cfg = {"IDE", 0, 0,
- config_ptr->pri_disk_info.net.ip_str,
- config_ptr->pri_disk_info.net.port,
- config_ptr->pri_disk_info.net.disk_name};
- PrintDebug("Creating NET HD\n");
- v3_create_device(info, "NET-HD", &cfg);
- }
- }
+ vm->run_state = VM_INVALID;
+
+ return vm;
+}
+
+/*
+
+
+*/
+
+
+struct v3_vm_info * v3_config_guest(void * cfg_blob, void * priv_data) {
+ extern v3_cpu_arch_t v3_mach_type;
+ struct v3_config * cfg_data = NULL;
+ struct v3_vm_info * vm = NULL;
+ int num_cores = 0;
+ int i = 0;
+ v3_cfg_tree_t * cores_cfg = NULL;
+ v3_cfg_tree_t * per_core_cfg = NULL;
+
+
+ if (v3_mach_type == V3_INVALID_CPU) {
+ PrintError(VM_NONE, VCORE_NONE, "Configuring guest on invalid CPU\n");
+ return NULL;
}
+ cfg_data = parse_config(cfg_blob);
- if (config_ptr->sec_disk_type != NONE) {
- if (config_ptr->sec_disk_type == CDROM) {
- if (config_ptr->sec_disk_con == RAM) {
- struct ram_cd_cfg cfg = {"IDE", 0, 1,
- (addr_t)(config_ptr->sec_disk_info.ram.data_ptr),
- config_ptr->sec_disk_info.ram.size};
+ if (!cfg_data) {
+ PrintError(VM_NONE, VCORE_NONE, "Could not parse configuration\n");
+ return NULL;
+ }
- PrintDebug("Creating RAM CD\n");
- v3_create_device(info, "RAM-CD", &cfg);
- } else if (config_ptr->sec_disk_con == NETWORK) {
- struct net_cd_cfg cfg = {"IDE", 0, 1,
- config_ptr->sec_disk_info.net.ip_str,
- config_ptr->sec_disk_info.net.port,
- config_ptr->sec_disk_info.net.disk_name};
- PrintDebug("Creating NET CD\n");
- v3_create_device(info, "NET-CD", &cfg);
- }
- } else if (config_ptr->sec_disk_type == HARDDRIVE) {
- if (config_ptr->sec_disk_con == RAM) {
- struct ram_hd_cfg cfg = {"IDE", 0, 1,
- (addr_t)(config_ptr->sec_disk_info.ram.data_ptr),
- config_ptr->sec_disk_info.ram.size};
- PrintDebug("Creating RAM HD\n");
- v3_create_device(info, "RAM-HD", &cfg);
- } else if (config_ptr->sec_disk_con == NETWORK) {
- struct net_hd_cfg cfg = {"IDE", 0, 1,
- config_ptr->sec_disk_info.net.ip_str,
- config_ptr->sec_disk_info.net.port,
- config_ptr->sec_disk_info.net.disk_name};
- PrintDebug("Creating NET HD\n");
- v3_create_device(info, "NET-HD", &cfg);
- }
- }
+ cores_cfg = v3_cfg_subtree(cfg_data->cfg, "cores");
+
+ if (!cores_cfg) {
+ PrintError(VM_NONE, VCORE_NONE, "Could not find core configuration (new config format required)\n");
+ return NULL;
+ }
+
+ num_cores = atoi(v3_cfg_val(cores_cfg, "count"));
+ if (num_cores == 0) {
+ PrintError(VM_NONE, VCORE_NONE, "No cores specified in configuration\n");
+ return NULL;
}
+ V3_Print(VM_NONE, VCORE_NONE, "Configuring %d cores\n", num_cores);
+
+ vm = allocate_guest(num_cores);
+ if (!vm) {
+ PrintError(VM_NONE, VCORE_NONE, "Could not allocate %d core guest\n", num_cores);
+ return NULL;
+ }
-#ifdef CONFIG_GENERIC
- configure_generic(info, config_ptr);
+#ifdef V3_CONFIG_CACHEPART
+ // Need to initialize cache management and resource control
+ // as early as possible so that allocations are done accordingly
+ if (v3_init_cachepart_vm(vm,cfg_data->cfg)) {
+ PrintError(VM_NONE, VCORE_NONE, "Could not initialize cache partioning\n");
+ V3_Free(vm);
+ return NULL;
+ }
#endif
- // This should go last because it requires information about the Harddrives
- v3_create_device(info, "NVRAM", "IDE");
-
- PrintDebugDevMgr(info);
+ vm->host_priv_data = priv_data;
- return 0;
-}
+ vm->cfg_data = cfg_data;
+ V3_Print(vm, VCORE_NONE, "Preconfiguration\n");
+ if (pre_config_vm(vm, vm->cfg_data->cfg) == -1) {
+ PrintError(vm, VCORE_NONE, "Error in preconfiguration, attempting to free\n");
+ vm->run_state=VM_ERROR;
+ v3_free_vm(vm);
+ return NULL;
+ }
-#ifdef CONFIG_GENERIC
-static int configure_generic(struct guest_info * info, struct v3_vm_config * config_ptr) {
- PrintDebug("Creating Generic Device\n");
- v3_create_device(info, "GENERIC", NULL);
-
+ V3_Print(vm, VCORE_NONE, "Per core configuration\n");
+ per_core_cfg = v3_cfg_subtree(cores_cfg, "core");
- struct vm_device * generic = v3_find_dev(info, "GENERIC");
+ // per core configuration
+ for (i = 0; i < vm->num_cores; i++) {
+ struct guest_info * info = &(vm->cores[i]);
- if (!generic) {
- PrintError("Could not find generic device\n");
- return -1;
+ info->vcpu_id = i;
+ info->vm_info = vm;
+ info->core_cfg_data = per_core_cfg;
+
+ if (pre_config_core(info, per_core_cfg) == -1) {
+ PrintError(vm, VCORE_NONE, "Error in core %d preconfiguration, attempting to free guest\n", i);
+ vm->run_state=VM_ERROR;
+ v3_free_vm(vm);
+ return NULL;
+ }
+
+
+ per_core_cfg = v3_cfg_next_branch(per_core_cfg);
}
- // port 0x92: A20 enable/disable (bit 2) (This causes an MMU flush)
+ V3_Print(vm, VCORE_NONE, "Post Configuration\n");
- // Make the DMA controller invisible
- v3_generic_add_port_range(generic, 0x00, 0x07, GENERIC_PRINT_AND_IGNORE); // DMA 1 channels 0,1,2,3 (address, counter)
- v3_generic_add_port_range(generic, 0xc0, 0xc7, GENERIC_PRINT_AND_IGNORE); // DMA 2 channels 4,5,6,7 (address, counter)
- v3_generic_add_port_range(generic, 0x87, 0x87, GENERIC_PRINT_AND_IGNORE); // DMA 1 channel 0 page register
- v3_generic_add_port_range(generic, 0x83, 0x83, GENERIC_PRINT_AND_IGNORE); // DMA 1 channel 1 page register
- v3_generic_add_port_range(generic, 0x81, 0x81, GENERIC_PRINT_AND_IGNORE); // DMA 1 channel 2 page register
- v3_generic_add_port_range(generic, 0x82, 0x82, GENERIC_PRINT_AND_IGNORE); // DMA 1 channel 3 page register
- v3_generic_add_port_range(generic, 0x8f, 0x8f, GENERIC_PRINT_AND_IGNORE); // DMA 2 channel 4 page register
- v3_generic_add_port_range(generic, 0x8b, 0x8b, GENERIC_PRINT_AND_IGNORE); // DMA 2 channel 5 page register
- v3_generic_add_port_range(generic, 0x89, 0x89, GENERIC_PRINT_AND_IGNORE); // DMA 2 channel 6 page register
- v3_generic_add_port_range(generic, 0x8a, 0x8a, GENERIC_PRINT_AND_IGNORE); // DMA 2 channel 7 page register
- v3_generic_add_port_range(generic, 0x08, 0x0f, GENERIC_PRINT_AND_IGNORE); // DMA 1 misc registers (csr, req, smask,mode,clearff,reset,enable,mmask)
- v3_generic_add_port_range(generic, 0xd0, 0xde, GENERIC_PRINT_AND_IGNORE); // DMA 2 misc registers
-
-
-
-
- // Make the Serial ports invisible
-
- v3_generic_add_port_range(generic, 0x3f8, 0x3f8+7, GENERIC_PRINT_AND_IGNORE); // COM 1
- v3_generic_add_port_range(generic, 0x2f8, 0x2f8+7, GENERIC_PRINT_AND_IGNORE); // COM 2
-
+ if (post_config_vm(vm, vm->cfg_data->cfg) == -1) {
+ PrintError(vm, VCORE_NONE, "Error in postconfiguration, attempting to free guest\n");
+ vm->run_state=VM_ERROR;
+ v3_free_vm(vm);
+ return NULL;
+ }
-
- v3_generic_add_port_range(generic, 0x3e8, 0x3e8+7, GENERIC_PRINT_AND_IGNORE); // COM 3
- v3_generic_add_port_range(generic, 0x2e8, 0x2e8+7, GENERIC_PRINT_AND_IGNORE); // COM 4
+ per_core_cfg = v3_cfg_subtree(cores_cfg, "core");
-
-
+ // per core configuration
+ for (i = 0; i < vm->num_cores; i++) {
+ struct guest_info * info = &(vm->cores[i]);
- // Make the PCI bus invisible (at least it's configuration)
-
- //v3_generic_add_port_range(generic, 0xcf8, 0xcf8, GENERIC_PRINT_AND_IGNORE); // PCI Config Address
- //v3_generic_add_port_range(generic, 0xcfc, 0xcfc, GENERIC_PRINT_AND_IGNORE); // PCI Config Data
-
-
-
-#if 0
- if (!use_ramdisk) {
- // Monitor the IDE controllers (very slow)
- v3_generic_add_port_range(generic, 0x170, 0x178, GENERIC_PRINT_AND_PASSTHROUGH); // IDE 1
- v3_generic_add_port_range(generic, 0x376, 0x377, GENERIC_PRINT_AND_PASSTHROUGH); // IDE 1
+ post_config_core(info, per_core_cfg);
+
+ per_core_cfg = v3_cfg_next_branch(per_core_cfg);
}
-
- v3_generic_add_port_range(generic, 0x1f0, 0x1f8, GENERIC_PRINT_AND_PASSTHROUGH); // IDE 0
- v3_generic_add_port_range(generic, 0x3f6, 0x3f7, GENERIC_PRINT_AND_PASSTHROUGH); // IDE 0
-#endif
-
-
-#if 0
-
- // Make the floppy controllers invisible
-
- v3_generic_add_port_range(generic, 0x3f0, 0x3f2, GENERIC_PRINT_AND_IGNORE); // Primary floppy controller (base,statusa/statusb,DOR)
- v3_generic_add_port_range(generic, 0x3f4, 0x3f5, GENERIC_PRINT_AND_IGNORE); // Primary floppy controller (mainstat/datarate,data)
- v3_generic_add_port_range(generic, 0x3f7, 0x3f7, GENERIC_PRINT_AND_IGNORE); // Primary floppy controller (DIR)
- v3_generic_add_port_range(generic, 0x370, 0x372, GENERIC_PRINT_AND_IGNORE); // Secondary floppy controller (base,statusa/statusb,DOR)
- v3_generic_add_port_range(generic, 0x374, 0x375, GENERIC_PRINT_AND_IGNORE); // Secondary floppy controller (mainstat/datarate,data)
- v3_generic_add_port_range(generic, 0x377, 0x377, GENERIC_PRINT_AND_IGNORE); // Secondary floppy controller (DIR)
-
-#endif
+ V3_Print(vm, VCORE_NONE, "Configuration successfull\n");
-#if 1
+ return vm;
+}
- // Make the parallel port invisible
-
- v3_generic_add_port_range(generic, 0x378, 0x37f, GENERIC_PRINT_AND_IGNORE);
-#endif
-#ifdef CONFIG_PASTHROUGH_VIDEO
+int v3_free_config(struct v3_vm_info * vm) {
+
+ v3_free_htable(vm->cfg_data->file_table, 1, 0);
+
+ v3_xml_free(vm->cfg_data->cfg);
+
+ V3_Free(vm->cfg_data);
+ return 0;
+}
- // Monitor graphics card operations
-
- v3_generic_add_port_range(generic, 0x3b0, 0x3bb, GENERIC_PRINT_AND_PASSTHROUGH);
- v3_generic_add_port_range(generic, 0x3c0, 0x3df, GENERIC_PRINT_AND_PASSTHROUGH);
-
-#endif
-#if 1
- // Make the ISA PNP features invisible
+
+static int setup_memory_map(struct v3_vm_info * vm, v3_cfg_tree_t * cfg) {
+ v3_cfg_tree_t * mem_region = v3_cfg_subtree(v3_cfg_subtree(cfg, "memmap"), "region");
+
+ while (mem_region) {
+ addr_t start_addr = atox(v3_cfg_val(mem_region, "start"));
+ addr_t end_addr = atox(v3_cfg_val(mem_region, "end"));
+ addr_t host_addr = atox(v3_cfg_val(mem_region, "host_addr"));
+
- v3_generic_add_port_range(generic, 0x274, 0x277, GENERIC_PRINT_AND_IGNORE);
- v3_generic_add_port_range(generic, 0x279, 0x279, GENERIC_PRINT_AND_IGNORE);
- v3_generic_add_port_range(generic, 0xa79, 0xa79, GENERIC_PRINT_AND_IGNORE);
-#endif
+ if (v3_add_shadow_mem(vm, V3_MEM_CORE_ANY, start_addr, end_addr, host_addr) == -1) {
+ PrintError(vm, VCORE_NONE,"Could not map memory region: %p-%p => %p\n",
+ (void *)start_addr, (void *)end_addr, (void *)host_addr);
+ return -1;
+ }
+ mem_region = v3_cfg_next_branch(mem_region);
+ }
-#if 1
- // Monitor any network card (realtek ne2000) operations
- v3_generic_add_port_range(generic, 0xc100, 0xc1ff, GENERIC_PRINT_AND_PASSTHROUGH);
-#endif
+ return 0;
+}
+
+
+static int setup_extensions(struct v3_vm_info * vm, v3_cfg_tree_t * cfg) {
+ v3_cfg_tree_t * extension = v3_cfg_subtree(v3_cfg_subtree(cfg, "extensions"), "extension");
+
+ while (extension) {
+ char * ext_name = v3_cfg_val(extension, "name");
+
+ if (!ext_name) {
+ PrintError(vm, VCORE_NONE, "Extension has no name\n");
+ return -1;
+ }
+
+ V3_Print(vm, VCORE_NONE, "Configuring extension %s\n", ext_name);
+
+ if (v3_add_extension(vm, ext_name, extension) == -1) {
+ PrintError(vm, VCORE_NONE, "Error adding extension %s\n", ext_name);
+ return -1;
+ }
+
+ extension = v3_cfg_next_branch(extension);
+ }
+
+ return 0;
+}
+
+
+static int setup_devices(struct v3_vm_info * vm, v3_cfg_tree_t * cfg) {
+ v3_cfg_tree_t * device = v3_cfg_subtree(v3_cfg_subtree(cfg, "devices"), "device");
- // v3_generic_add_port_range(generic, 0x378, 0x400, GENERIC_PRINT_AND_IGNORE);
+ while (device) {
+ char * dev_class = v3_cfg_val(device, "class");
+
+ V3_Print(vm, VCORE_NONE, "configuring device %s\n", dev_class);
+
+ if (v3_create_device(vm, dev_class, device) == -1) {
+ PrintError(vm, VCORE_NONE, "Error creating device %s\n", dev_class);
+ return -1;
+ }
+
+ device = v3_cfg_next_branch(device);
+ }
+
+ v3_print_dev_mgr(vm);
+
return 0;
}
-#endif
+
+
+
