-/*
+ /*
* This file is part of the Palacios Virtual Machine Monitor developed
* by the V3VEE Project with funding from the United States National
* Science Foundation and the Department of Energy.
#include <palacios/vmm_debug.h>
#include <palacios/vmm_msr.h>
#include <palacios/vmm_decoder.h>
+#include <palacios/vmm_telemetry.h>
+#include <palacios/vmm_mem.h>
+#include <palacios/vmm_hypercall.h>
+#include <palacios/vmm_dev_mgr.h>
+#include <palacios/vmm_cpuid.h>
+#include <palacios/vmm_xml.h>
-#include <devices/serial.h>
-#include <devices/keyboard.h>
-#include <devices/8259a.h>
-#include <devices/8254.h>
-#include <devices/nvram.h>
-#include <devices/generic.h>
-#include <devices/ramdisk.h>
-#include <devices/cdrom.h>
-#include <devices/bochs_debug.h>
+#include <palacios/svm.h>
+#include <palacios/vmx.h>
+
+#ifdef CONFIG_SYMBIOTIC
+#include <palacios/vmm_sym_iface.h>
+
+#ifdef CONFIG_SYMBIOTIC_SWAP
+#include <palacios/vmm_sym_swap.h>
+#endif
+
+#endif
#include <palacios/vmm_host_events.h>
+#include <palacios/vmm_socket.h>
-#define USE_GENERIC 1
+#include "vmm_config_class.h"
+// This is used to access the configuration file index table
+struct file_hdr {
+ uint32_t index;
+ uint32_t size;
+ uint64_t offset;
+};
-#define ROMBIOS_START 0x000f0000
-#define VGABIOS_START 0x000c0000
+struct file_idx_table {
+ uint64_t num_files;
+ struct file_hdr hdrs[0];
+};
-static int setup_memory_map(struct guest_info * info, struct v3_vm_config * config_ptr);
-static int setup_devices(struct guest_info * info, struct v3_vm_config * config_ptr);
-static struct vm_device * configure_generic(struct guest_info * info, struct v3_vm_config * config_ptr);
+static int setup_memory_map(struct guest_info * info, struct v3_config * config_ptr);
+static int setup_devices(struct guest_info * info, struct v3_config * config_ptr);
+char * v3_cfg_val(v3_cfg_tree_t * tree, char * tag) {
+ char * attrib = (char *)v3_xml_attr(tree, tag);
+ v3_cfg_tree_t * child_entry = v3_xml_child(tree, tag);
+ char * val = NULL;
-static int passthrough_mem_write(addr_t guest_addr, void * src, uint_t length, void * priv_data) {
+ if ((child_entry != NULL) && (attrib != NULL)) {
+ PrintError("Duplicate Configuration parameters present for %s\n", tag);
+ return NULL;
+ }
- return length;
- // memcpy((void*)guest_addr, src, length);
- PrintDebug("Write of %d bytes to %p\n", length, (void *)guest_addr);
- PrintDebug("Write Value = %p\n", (void *)*(addr_t *)src);
+ val = (attrib == NULL) ? v3_xml_txt(child_entry): attrib;
- return length;
+ return val;
}
+v3_cfg_tree_t * v3_cfg_subtree(v3_cfg_tree_t * tree, char * tag) {
+ return v3_xml_child(tree, tag);
+}
+v3_cfg_tree_t * v3_cfg_next_branch(v3_cfg_tree_t * tree) {
+ return v3_xml_next(tree);
+}
-int v3_config_guest(struct guest_info * info, struct v3_vm_config * config_ptr) {
- extern v3_cpu_arch_t v3_cpu_type;
- // Initialize the subsystem data strutures
- v3_init_time(info);
- v3_init_io_map(info);
- v3_init_msr_map(info);
- v3_init_interrupt_state(info);
- v3_init_dev_mgr(info);
- v3_init_host_events(info);
- v3_init_decoder(info);
+struct v3_cfg_file * v3_cfg_get_file(struct guest_info * info, char * tag) {
+ struct v3_cfg_file * file = NULL;
- init_shadow_map(info);
-
- if (v3_cpu_type == V3_SVM_REV3_CPU) {
- info->shdw_pg_mode = NESTED_PAGING;
- } else {
- v3_init_shadow_page_state(info);
- info->shdw_pg_mode = SHADOW_PAGING;
- }
-
- // Initial CPU operating mode
- info->cpu_mode = REAL;
- info->mem_mode = PHYSICAL_MEM;
+ file = (struct v3_cfg_file *)v3_htable_search(info->cfg_data->file_table, (addr_t)tag);
- // Amount of ram the Guest will have
- info->mem_size = config_ptr->mem_size;
+ return file;
+}
- // Configure the memory map for the guest
- setup_memory_map(info, config_ptr);
- // Configure the devices for the guest
- setup_devices(info, config_ptr);
-
+static uint_t file_hash_fn(addr_t key) {
+ char * name = (char *)key;
+ return v3_hash_buffer((uchar_t *)name, strlen(name));
+}
- //v3_hook_io_port(info, 1234, &IO_Read, NULL, info);
+static int file_eq_fn(addr_t key1, addr_t key2) {
+ char * name1 = (char *)key1;
+ char * name2 = (char *)key2;
- // Setup initial cpu register state
- info->rip = 0xfff0;
- info->vm_regs.rsp = 0x0;
-
-
- return 0;
+ return (strcmp(name1, name2) == 0);
}
+static struct v3_config * parse_config(void * cfg_blob) {
+ struct v3_config * cfg = NULL;
+ int offset = 0;
+ uint_t xml_len = 0;
+ struct file_idx_table * files = NULL;
+ v3_cfg_tree_t * file_tree = NULL;
-/* TODO:
- * The amount of guest memory is stored in info->mem_size
- * We need to make sure the memory map extends to cover it
- */
-static int setup_memory_map(struct guest_info * info, struct v3_vm_config * config_ptr) {
+ V3_Print("cfg data at %p\n", cfg_blob);
+
+ if (memcmp(cfg_blob, "v3vee\0\0\0", 8) != 0) {
+ PrintError("Invalid Configuration Header\n");
+ return NULL;
+ }
- /* layout rombios */
- {
- uint_t num_pages = (config_ptr->rombios_size + PAGE_SIZE - 1) / PAGE_SIZE;
- void * guest_mem = V3_AllocPages(num_pages);
+ offset += 8;
- PrintDebug("Layout Region %d bytes\n", config_ptr->rombios_size);
- memcpy(V3_VAddr(guest_mem), config_ptr->rombios, config_ptr->rombios_size);
+ cfg = (struct v3_config *)V3_Malloc(sizeof(struct v3_config));
+ memset(cfg, 0, sizeof(struct v3_config));
- add_shadow_region_passthrough(info, ROMBIOS_START, ROMBIOS_START + (num_pages * PAGE_SIZE), (addr_t)guest_mem);
+ cfg->blob = cfg_blob;
+ INIT_LIST_HEAD(&(cfg->file_list));
+ cfg->file_table = v3_create_htable(0, file_hash_fn, file_eq_fn);
- PrintDebug("Adding Shadow Region (0x%p-0x%p) -> 0x%p\n",
- (void *)ROMBIOS_START,
- (void *)ROMBIOS_START + (num_pages * PAGE_SIZE),
- (void *)guest_mem);
- }
+ xml_len = *(uint32_t *)(cfg_blob + offset);
+ offset += 4;
+ cfg->cfg = (v3_cfg_tree_t *)v3_xml_parse((uint8_t *)(cfg_blob + offset));
+ offset += xml_len;
+
+ offset += 8;
- /* layout vgabios */
- {
- uint_t num_pages = (config_ptr->vgabios_size + PAGE_SIZE - 1) / PAGE_SIZE;
- void * guest_mem = V3_AllocPages(num_pages);
+ files = (struct file_idx_table *)(cfg_blob + offset);
- PrintDebug("Layout Region %d bytes\n", config_ptr->vgabios_size);
- memcpy(V3_VAddr(guest_mem), config_ptr->vgabios, config_ptr->vgabios_size);
+ V3_Print("Number of files in cfg: %d\n", (uint32_t)(files->num_files));
- add_shadow_region_passthrough(info, VGABIOS_START, VGABIOS_START + (num_pages * PAGE_SIZE), (addr_t)guest_mem);
-
- PrintDebug("Adding Shadow Region (0x%p-0x%p) -> 0x%p\n",
- (void *)VGABIOS_START,
- (void *)VGABIOS_START + (num_pages * PAGE_SIZE),
- (void *)guest_mem);
- }
-
- //
- add_shadow_region_passthrough(info, 0x0, 0xa0000, (addr_t)V3_AllocPages(160));
-
- if (0) {
- add_shadow_region_passthrough(info, 0xa0000, 0xc0000, 0xa0000);
- } else {
- v3_hook_write_mem(info, 0xa0000, 0xc0000, 0xa0000, passthrough_mem_write, NULL);
- }
-
- // TEMP
- //add_shadow_region_passthrough(info, 0xc0000, 0xc8000, 0xc0000);
-
- if (1) {
- add_shadow_region_passthrough(info, 0xc7000, 0xc8000, (addr_t)V3_AllocPages(1));
- if (add_shadow_region_passthrough(info, 0xc8000, 0xf0000, (addr_t)V3_AllocPages(40)) == -1) {
- PrintDebug("Error adding shadow region\n");
- }
- } else {
- add_shadow_region_passthrough(info, 0xc0000, 0xc8000, 0xc0000);
- add_shadow_region_passthrough(info, 0xc8000, 0xf0000, 0xc8000);
- }
-
-
- if (1) {
- add_shadow_region_passthrough(info, 0x100000, 0x1000000, (addr_t)V3_AllocPages(4096));
- } else {
- /* MEMORY HOOK TEST */
- add_shadow_region_passthrough(info, 0x100000, 0xa00000, (addr_t)V3_AllocPages(2304));
- v3_hook_write_mem(info, 0xa00000, 0xa01000, (addr_t)V3_AllocPages(1), passthrough_mem_write, NULL);
- add_shadow_region_passthrough(info, 0xa01000, 0x1000000, (addr_t)V3_AllocPages(1791));
- }
-
- add_shadow_region_passthrough(info, 0x1000000, 0x8000000, (addr_t)V3_AllocPages(32768));
-
- // test - give linux accesss to PCI space - PAD
- add_shadow_region_passthrough(info, 0xc0000000,0xffffffff,0xc0000000);
-
-
- print_shadow_map(&(info->mem_map));
+ file_tree = v3_cfg_subtree(v3_cfg_subtree(cfg->cfg, "files"), "file");
- return 0;
-}
+ while (file_tree) {
+ char * id = v3_cfg_val(file_tree, "id");
+ char * index = v3_cfg_val(file_tree, "index");
+ int idx = atoi(index);
+ struct file_hdr * hdr = &(files->hdrs[idx]);
+ struct v3_cfg_file * file = NULL;
+ file = (struct v3_cfg_file *)V3_Malloc(sizeof(struct v3_cfg_file));
+
+ if (!file) {
+ PrintError("Could not allocate file structure\n");
+ return NULL;
+ }
-static int setup_devices(struct guest_info * info, struct v3_vm_config * config_ptr) {
- struct vm_device * ramdisk = NULL;
- struct vm_device * cdrom = NULL;
- struct vm_device * nvram = v3_create_nvram();
- //struct vm_device * timer = v3_create_timer();
- struct vm_device * pic = v3_create_pic();
- struct vm_device * keyboard = v3_create_keyboard();
- struct vm_device * pit = v3_create_pit();
- struct vm_device * bochs_debug = v3_create_bochs_debug();
+ V3_Print("File index=%d id=%s\n", idx, id);
- //struct vm_device * serial = v3_create_serial();
- struct vm_device * generic = NULL;
+ strncpy(file->tag, id, 256);
+ file->size = hdr->size;
+ file->data = cfg_blob + hdr->offset;
- int use_ramdisk = config_ptr->use_ramdisk;
- int use_generic = USE_GENERIC;
+ V3_Print("Storing file data offset = %d, size=%d\n", (uint32_t)hdr->offset, hdr->size);
+ V3_Print("file data at %p\n", file->data);
+ list_add( &(file->file_node), &(cfg->file_list));
+ V3_Print("Keying file to name\n");
+ v3_htable_insert(cfg->file_table, (addr_t)(file->tag), (addr_t)(file));
- if (use_ramdisk) {
- PrintDebug("Creating Ramdisk\n");
- ramdisk = v3_create_ramdisk();
- cdrom = v3_create_cdrom(ramdisk, config_ptr->ramdisk, config_ptr->ramdisk_size);
+ V3_Print("Iterating to next file\n");
+
+ file_tree = v3_cfg_next_branch(file_tree);
}
+
+ V3_Print("Configuration parsed successfully\n");
+
+ return cfg;
+}
+
+
+static int pre_config_guest(struct guest_info * info, struct v3_config * config_ptr) {
+ extern v3_cpu_arch_t v3_cpu_types[];
+ char * memory_str = v3_cfg_val(config_ptr->cfg, "memory");
+ char * paging = v3_cfg_val(config_ptr->cfg, "paging");
+ char * schedule_hz_str = v3_cfg_val(config_ptr->cfg, "schedule_hz");
+ char * vm_class = v3_cfg_val(config_ptr->cfg, "class");
+ uint32_t sched_hz = 100; // set the schedule frequency to 100 HZ
-
- if (use_generic) {
- generic = configure_generic(info, config_ptr);
+ if (!memory_str) {
+ PrintError("Memory is a required configuration parameter\n");
+ return -1;
}
+
+ PrintDebug("Memory=%s\n", memory_str);
+ // Amount of ram the Guest will have, always in MB
+ info->mem_size = atoi(memory_str) * 1024 * 1024;
+
+ if (strcasecmp(vm_class, "PC") == 0) {
+ info->vm_class = V3_PC_VM;
+ } else {
+ PrintError("Invalid VM class\n");
+ return -1;
+ }
- v3_attach_device(info, nvram);
- //v3_attach_device(info, timer);
- v3_attach_device(info, pic);
- v3_attach_device(info, pit);
- v3_attach_device(info, keyboard);
- // v3_attach_device(info, serial);
- v3_attach_device(info, bochs_debug);
- if (use_ramdisk) {
- v3_attach_device(info, ramdisk);
- v3_attach_device(info, cdrom);
+ /*
+ * Initialize the subsystem data strutures
+ */
+#ifdef CONFIG_TELEMETRY
+ {
+ char * telemetry = v3_cfg_val(config_ptr->cfg, "telemetry");
+
+ // This should go first, because other subsystems will depend on the guest_info flag
+ if ((telemetry) && (strcasecmp(telemetry, "enable") == 0)) {
+ info->enable_telemetry = 1;
+ v3_init_telemetry(info);
+ } else {
+ info->enable_telemetry = 0;
+ }
}
+#endif
- if (use_generic) {
- // Important that this be attached last!
- v3_attach_device(info, generic);
+ v3_init_hypercall_map(info);
+ v3_init_io_map(info);
+ v3_init_msr_map(info);
+ v3_init_cpuid_map(info);
+ v3_init_host_events(info);
+
+ // Initialize the memory map
+ if (v3_init_shadow_map(info) == -1) {
+ PrintError("Could not initialize shadow map\n");
+ return -1;
}
- PrintDebugDevMgr(info);
+ if ((v3_cpu_types[info->cpu_id] == V3_SVM_REV3_CPU) &&
+ (paging) && (strcasecmp(paging, "nested") == 0)) {
+ PrintDebug("Guest Page Mode: NESTED_PAGING\n");
+ info->shdw_pg_mode = NESTED_PAGING;
+ } else {
+ PrintDebug("Guest Page Mode: SHADOW_PAGING\n");
+ v3_init_shadow_page_state(info);
+ info->shdw_pg_mode = SHADOW_PAGING;
+ }
+#ifdef CONFIG_SYMBIOTIC
+ v3_init_sym_iface(info);
+#endif
- // give keyboard interrupts to vm
- // no longer needed since we have a keyboard device
- //hook_irq(&vm_info, 1);
+ v3_init_time(info);
+ v3_init_interrupt_state(info);
+ v3_init_exception_state(info);
+ v3_init_dev_mgr(info);
+ v3_init_decoder(info);
-#if 0
- // give floppy controller to vm
- v3_hook_passthrough_irq(info, 6);
+#ifdef CONFIG_SYMBIOTIC_SWAP
+ PrintDebug("initializing symbiotic swap\n");
+ v3_init_sym_swap(info);
#endif
+
+ if (schedule_hz_str) {
+ sched_hz = atoi(schedule_hz_str);
+ }
+
+ PrintDebug("CPU_KHZ = %d, schedule_freq=%p\n", V3_CPU_KHZ(),
+ (void *)(addr_t)sched_hz);
+
+ info->yield_cycle_period = (V3_CPU_KHZ() * 1000) / sched_hz;
+ if (info->vm_class == V3_PC_VM) {
+ if (pre_config_pc(info, config_ptr) == -1) {
+ PrintError("PC Post configuration failure\n");
+ return -1;
+ }
+ } else {
+ PrintError("Invalid VM Class\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+
+static int post_config_guest(struct guest_info * info, struct v3_config * config_ptr) {
+
+ // Configure the memory map for the guest
+ if (setup_memory_map(info, config_ptr) == -1) {
+ PrintError("Setting up guest memory map failed...\n");
+ return -1;
+ }
- if (!use_ramdisk) {
- PrintDebug("Hooking IDE IRQs\n");
-
- //primary ide
- v3_hook_passthrough_irq(info, 14);
-
- // secondary ide
- v3_hook_passthrough_irq(info, 15);
- }
-
+ //v3_hook_io_port(info, 1234, &IO_Read, NULL, info);
+
+ if (setup_devices(info, config_ptr) == -1) {
+ PrintError("Failed to setup devices\n");
+ return -1;
+ }
+
+ // v3_print_io_map(info);
+ v3_print_msr_map(info);
+
+ info->run_state = VM_STOPPED;
- return 0;
+ if (info->vm_class == V3_PC_VM) {
+ if (post_config_pc(info, config_ptr) == -1) {
+ PrintError("PC Post configuration failure\n");
+ return -1;
+ }
+ } else {
+ PrintError("Invalid VM Class\n");
+ return -1;
+ }
+
+
+ return 0;
}
-static struct vm_device * configure_generic(struct guest_info * info, struct v3_vm_config * config_ptr) {
- PrintDebug("Creating Generic Device\n");
- struct vm_device * generic = v3_create_generic();
-
- // Make the DMA controller invisible
- v3_generic_add_port_range(generic, 0x00, 0x07, GENERIC_PRINT_AND_IGNORE); // DMA 1 channels 0,1,2,3 (address, counter)
- v3_generic_add_port_range(generic, 0xc0, 0xc7, GENERIC_PRINT_AND_IGNORE); // DMA 2 channels 4,5,6,7 (address, counter)
- v3_generic_add_port_range(generic, 0x87, 0x87, GENERIC_PRINT_AND_IGNORE); // DMA 1 channel 0 page register
- v3_generic_add_port_range(generic, 0x83, 0x83, GENERIC_PRINT_AND_IGNORE); // DMA 1 channel 1 page register
- v3_generic_add_port_range(generic, 0x81, 0x81, GENERIC_PRINT_AND_IGNORE); // DMA 1 channel 2 page register
- v3_generic_add_port_range(generic, 0x82, 0x82, GENERIC_PRINT_AND_IGNORE); // DMA 1 channel 3 page register
- v3_generic_add_port_range(generic, 0x8f, 0x8f, GENERIC_PRINT_AND_IGNORE); // DMA 2 channel 4 page register
- v3_generic_add_port_range(generic, 0x8b, 0x8b, GENERIC_PRINT_AND_IGNORE); // DMA 2 channel 5 page register
- v3_generic_add_port_range(generic, 0x89, 0x89, GENERIC_PRINT_AND_IGNORE); // DMA 2 channel 6 page register
- v3_generic_add_port_range(generic, 0x8a, 0x8a, GENERIC_PRINT_AND_IGNORE); // DMA 2 channel 7 page register
- v3_generic_add_port_range(generic, 0x08, 0x0f, GENERIC_PRINT_AND_IGNORE); // DMA 1 misc registers (csr, req, smask,mode,clearff,reset,enable,mmask)
- v3_generic_add_port_range(generic, 0xd0, 0xde, GENERIC_PRINT_AND_IGNORE); // DMA 2 misc registers
-
-
-
-
- // Make the Serial ports invisible
-
- v3_generic_add_port_range(generic, 0x3f8, 0x3f8+7, GENERIC_PRINT_AND_IGNORE); // COM 1
- v3_generic_add_port_range(generic, 0x2f8, 0x2f8+7, GENERIC_PRINT_AND_IGNORE); // COM 2
-
-
-
-
- v3_generic_add_port_range(generic, 0x3e8, 0x3e8+7, GENERIC_PRINT_AND_IGNORE); // COM 3
- v3_generic_add_port_range(generic, 0x2e8, 0x2e8+7, GENERIC_PRINT_AND_IGNORE); // COM 4
-
-
-
-
- // Make the PCI bus invisible (at least it's configuration)
-
- v3_generic_add_port_range(generic, 0xcf8, 0xcf8, GENERIC_PRINT_AND_IGNORE); // PCI Config Address
- v3_generic_add_port_range(generic, 0xcfc, 0xcfc, GENERIC_PRINT_AND_IGNORE); // PCI Config Data
-
-
-
-#if 0
- if (!use_ramdisk) {
- // Monitor the IDE controllers (very slow)
- v3_generic_add_port_range(generic, 0x170, 0x178, GENERIC_PRINT_AND_PASSTHROUGH); // IDE 1
- v3_generic_add_port_range(generic, 0x376, 0x377, GENERIC_PRINT_AND_PASSTHROUGH); // IDE 1
- }
-
-
- v3_generic_add_port_range(generic, 0x1f0, 0x1f8, GENERIC_PRINT_AND_PASSTHROUGH); // IDE 0
- v3_generic_add_port_range(generic, 0x3f6, 0x3f7, GENERIC_PRINT_AND_PASSTHROUGH); // IDE 0
+int v3_config_guest(struct guest_info * info, void * cfg_blob) {
+ v3_cpu_arch_t cpu_type = v3_get_cpu_type(v3_get_cpu_id());
+
+ if (cpu_type == V3_INVALID_CPU) {
+ PrintError("Configuring guest on invalid CPU\n");
+ return -1;
+ }
+
+ info->cfg_data = parse_config(cfg_blob);
+
+ if (!info->cfg_data) {
+ PrintError("Could not parse configuration\n");
+ return -1;
+ }
+
+ V3_Print("Preconfiguration\n");
+
+ if (pre_config_guest(info, info->cfg_data) == -1) {
+ PrintError("Error in preconfiguration\n");
+ return -1;
+ }
+
+ V3_Print("Arch dependent configuration\n");
+
+ // init SVM/VMX
+#ifdef CONFIG_SVM
+ if ((cpu_type == V3_SVM_CPU) || (cpu_type == V3_SVM_REV3_CPU)) {
+ if (v3_init_svm_vmcb(info, info->vm_class) == -1) {
+ PrintError("Error in SVM initialization\n");
+ return -1;
+ }
+ }
#endif
-
-
-#if 0
-
- // Make the floppy controllers invisible
-
- v3_generic_add_port_range(generic, 0x3f0, 0x3f2, GENERIC_PRINT_AND_IGNORE); // Primary floppy controller (base,statusa/statusb,DOR)
- v3_generic_add_port_range(generic, 0x3f4, 0x3f5, GENERIC_PRINT_AND_IGNORE); // Primary floppy controller (mainstat/datarate,data)
- v3_generic_add_port_range(generic, 0x3f7, 0x3f7, GENERIC_PRINT_AND_IGNORE); // Primary floppy controller (DIR)
- v3_generic_add_port_range(generic, 0x370, 0x372, GENERIC_PRINT_AND_IGNORE); // Secondary floppy controller (base,statusa/statusb,DOR)
- v3_generic_add_port_range(generic, 0x374, 0x375, GENERIC_PRINT_AND_IGNORE); // Secondary floppy controller (mainstat/datarate,data)
- v3_generic_add_port_range(generic, 0x377, 0x377, GENERIC_PRINT_AND_IGNORE); // Secondary floppy controller (DIR)
-
+#ifdef CONFIG_VMX
+ else if ((cpu_type == V3_VMX_CPU) || (cpu_type == V3_VMX_EPT_CPU)) {
+ if (v3_init_vmx_vmcs(info, info->vm_class) == -1) {
+ PrintError("Error in VMX initialization\n");
+ return -1;
+ }
+ }
#endif
+ else {
+ PrintError("Invalid CPU Type\n");
+ return -1;
+ }
-#if 1
+ V3_Print("Post Configuration\n");
- // Make the parallel port invisible
-
- v3_generic_add_port_range(generic, 0x378, 0x37f, GENERIC_PRINT_AND_IGNORE);
+ if (post_config_guest(info, info->cfg_data) == -1) {
+ PrintError("Error in postconfiguration\n");
+ return -1;
+ }
-#endif
+ V3_Print("Configuration successfull\n");
-#if 1
+ return 0;
+}
- // Monitor graphics card operations
- v3_generic_add_port_range(generic, 0x3b0, 0x3bb, GENERIC_PRINT_AND_PASSTHROUGH);
- v3_generic_add_port_range(generic, 0x3c0, 0x3df, GENERIC_PRINT_AND_PASSTHROUGH);
-
-#endif
-#if 1
- // Make the ISA PNP features invisible
- v3_generic_add_port_range(generic, 0x274, 0x277, GENERIC_PRINT_AND_IGNORE);
- v3_generic_add_port_range(generic, 0x279, 0x279, GENERIC_PRINT_AND_IGNORE);
- v3_generic_add_port_range(generic, 0xa79, 0xa79, GENERIC_PRINT_AND_IGNORE);
-#endif
+static int setup_memory_map(struct guest_info * info, struct v3_config * config_ptr) {
+ v3_cfg_tree_t * mem_region = v3_cfg_subtree(v3_cfg_subtree(config_ptr->cfg, "memmap"), "region");
+
+ while (mem_region) {
+ addr_t start_addr = atox(v3_cfg_val(mem_region, "start"));
+ addr_t end_addr = atox(v3_cfg_val(mem_region, "end"));
+ addr_t host_addr = atox(v3_cfg_val(mem_region, "host_addr"));
+
+
+ if (v3_add_shadow_mem(info, start_addr, end_addr, host_addr) == -1) {
+ PrintError("Could not map memory region: %p-%p => %p\n",
+ (void *)start_addr, (void *)end_addr, (void *)host_addr);
+ return -1;
+ }
+
+ mem_region = v3_cfg_next_branch(mem_region);
+ }
+
+ return 0;
+}
+
-#if 1
- // Monitor any network card (realtek ne2000) operations
- v3_generic_add_port_range(generic, 0xc100, 0xc1ff, GENERIC_PRINT_AND_PASSTHROUGH);
-#endif
-#if 1
- // Make any Bus master ide controller invisible
-
- v3_generic_add_port_range(generic, 0xc000, 0xc00f, GENERIC_PRINT_AND_IGNORE);
-#endif
- // v3_generic_add_port_range(generic, 0x378, 0x400, GENERIC_PRINT_AND_IGNORE);
-
- return generic;
+
+
+static int setup_devices(struct guest_info * info, struct v3_config * config_ptr) {
+ v3_cfg_tree_t * device = v3_cfg_subtree(v3_cfg_subtree(config_ptr->cfg, "devices"), "device");
+
+
+ while (device) {
+ char * id = v3_cfg_val(device, "id");
+
+ V3_Print("configuring device %s\n", id);
+
+ if (v3_create_device(info, id, device) == -1) {
+ PrintError("Error creating device %s\n", id);
+ return -1;
+ }
+
+ device = v3_cfg_next_branch(device);
+ }
+
+
+ v3_print_dev_mgr(info);
+
+ return 0;
}
+
+
