#include <devices/8254.h>
#include <devices/nvram.h>
#include <devices/generic.h>
-
-//Zheng 09/29/2008
-#ifdef RAMDISK_BOOT
#include <devices/ramdisk.h>
-#endif
+
+
+#define USE_GENERIC 1
+#define USE_RAMDISK 0
+
static int mem_test_read(addr_t guest_addr, void * dst, uint_t length, void * priv_data) {
void * region_start;
int i;
-
+ int use_ramdisk = USE_RAMDISK;
+ int use_generic = USE_GENERIC;
+
+
v3_init_time(info);
init_shadow_map(info);
{
-
+ struct vm_device * ramdisk = NULL;
struct vm_device * nvram = create_nvram();
//struct vm_device * timer = create_timer();
struct vm_device * pic = create_pic();
struct vm_device * keyboard = create_keyboard();
struct vm_device * pit = create_pit();
//struct vm_device * serial = create_serial();
-
+ struct vm_device * generic = NULL;
//Zheng 09/29/2008
-#ifdef RAMDISK_BOOT
- struct vm_device * ramdisk = create_ramdisk();
-#endif
+ if (use_ramdisk) {
+ ramdisk = create_ramdisk();
+ }
-#define GENERIC 1
-#if GENERIC
- generic_port_range_type range[] = {
-#if 1
+ if (use_generic) {
+ generic = create_generic();
+
// Make the DMA controller invisible
-
- {0x00, 0x07, GENERIC_PRINT_AND_IGNORE}, // DMA 1 channels 0,1,2,3 (address, counter)
- {0xc0, 0xc7, GENERIC_PRINT_AND_IGNORE}, // DMA 2 channels 4,5,6,7 (address, counter)
- {0x87, 0x87, GENERIC_PRINT_AND_IGNORE}, // DMA 1 channel 0 page register
- {0x83, 0x83, GENERIC_PRINT_AND_IGNORE}, // DMA 1 channel 1 page register
- {0x81, 0x81, GENERIC_PRINT_AND_IGNORE}, // DMA 1 channel 2 page register
- {0x82, 0x82, GENERIC_PRINT_AND_IGNORE}, // DMA 1 channel 3 page register
- {0x8f, 0x8f, GENERIC_PRINT_AND_IGNORE}, // DMA 2 channel 4 page register
- {0x8b, 0x8b, GENERIC_PRINT_AND_IGNORE}, // DMA 2 channel 5 page register
- {0x89, 0x89, GENERIC_PRINT_AND_IGNORE}, // DMA 2 channel 6 page register
- {0x8a, 0x8a, GENERIC_PRINT_AND_IGNORE}, // DMA 2 channel 7 page register
- {0x08, 0x0f, GENERIC_PRINT_AND_IGNORE}, // DMA 1 misc registers (csr, req, smask,mode,clearff,reset,enable,mmask)
- {0xd0, 0xde, GENERIC_PRINT_AND_IGNORE}, // DMA 2 misc registers
-#endif
+ v3_generic_add_port_range(generic, 0x00, 0x07, GENERIC_PRINT_AND_IGNORE); // DMA 1 channels 0,1,2,3 (address, counter)
+ v3_generic_add_port_range(generic, 0xc0, 0xc7, GENERIC_PRINT_AND_IGNORE); // DMA 2 channels 4,5,6,7 (address, counter)
+ v3_generic_add_port_range(generic, 0x87, 0x87, GENERIC_PRINT_AND_IGNORE); // DMA 1 channel 0 page register
+ v3_generic_add_port_range(generic, 0x83, 0x83, GENERIC_PRINT_AND_IGNORE); // DMA 1 channel 1 page register
+ v3_generic_add_port_range(generic, 0x81, 0x81, GENERIC_PRINT_AND_IGNORE); // DMA 1 channel 2 page register
+ v3_generic_add_port_range(generic, 0x82, 0x82, GENERIC_PRINT_AND_IGNORE); // DMA 1 channel 3 page register
+ v3_generic_add_port_range(generic, 0x8f, 0x8f, GENERIC_PRINT_AND_IGNORE); // DMA 2 channel 4 page register
+ v3_generic_add_port_range(generic, 0x8b, 0x8b, GENERIC_PRINT_AND_IGNORE); // DMA 2 channel 5 page register
+ v3_generic_add_port_range(generic, 0x89, 0x89, GENERIC_PRINT_AND_IGNORE); // DMA 2 channel 6 page register
+ v3_generic_add_port_range(generic, 0x8a, 0x8a, GENERIC_PRINT_AND_IGNORE); // DMA 2 channel 7 page register
+ v3_generic_add_port_range(generic, 0x08, 0x0f, GENERIC_PRINT_AND_IGNORE); // DMA 1 misc registers (csr, req, smask,mode,clearff,reset,enable,mmask)
+ v3_generic_add_port_range(generic, 0xd0, 0xde, GENERIC_PRINT_AND_IGNORE); // DMA 2 misc registers
+
+
+
-
-#if 1
// Make the Serial ports invisible
+
+ v3_generic_add_port_range(generic, 0x3f8, 0x3f8+7, GENERIC_PRINT_AND_IGNORE); // COM 1
+ v3_generic_add_port_range(generic, 0x2f8, 0x2f8+7, GENERIC_PRINT_AND_IGNORE); // COM 2
+
- {0x3f8, 0x3f8+7, GENERIC_PRINT_AND_IGNORE}, // COM 1
- {0x2f8, 0x2f8+7, GENERIC_PRINT_AND_IGNORE}, // COM 2
-
-#endif
-
+
#ifndef DEBUG_RAMDISK
-
- {0x3e8, 0x3e8+7, GENERIC_PRINT_AND_IGNORE}, // COM 3
- {0x2e8, 0x2e8+7, GENERIC_PRINT_AND_IGNORE}, // COM 4
+
+ v3_generic_add_port_range(generic, 0x3e8, 0x3e8+7, GENERIC_PRINT_AND_IGNORE); // COM 3
+ v3_generic_add_port_range(generic, 0x2e8, 0x2e8+7, GENERIC_PRINT_AND_IGNORE); // COM 4
#endif
+
+
-
-#if 1
// Make the PCI bus invisible (at least it's configuration)
+
+ v3_generic_add_port_range(generic, 0xcf8, 0xcf8, GENERIC_PRINT_AND_IGNORE); // PCI Config Address
+ v3_generic_add_port_range(generic, 0xcfc, 0xcfc, GENERIC_PRINT_AND_IGNORE); // PCI Config Data
- {0xcf8, 0xcf8, GENERIC_PRINT_AND_IGNORE}, // PCI Config Address
- {0xcfc, 0xcfc, GENERIC_PRINT_AND_IGNORE}, // PCI Config Data
-#endif
-
-
-#ifndef RAMDISK_BOOT
-
- // Monitor the IDE controllers (very slow)
-
- {0x170, 0x178, GENERIC_PRINT_AND_PASSTHROUGH}, // IDE 1
- {0x376, 0x377, GENERIC_PRINT_AND_PASSTHROUGH}, // IDE 1
-
-#endif
-
+
+
+ if (!use_ramdisk) {
+ // Monitor the IDE controllers (very slow)
+ v3_generic_add_port_range(generic, 0x170, 0x178, GENERIC_PRINT_AND_PASSTHROUGH); // IDE 1
+ v3_generic_add_port_range(generic, 0x376, 0x377, GENERIC_PRINT_AND_PASSTHROUGH); // IDE 1
+ }
+
#if 1
- {0x1f0, 0x1f8, GENERIC_PRINT_AND_PASSTHROUGH}, // IDE 0
- {0x3f6, 0x3f7, GENERIC_PRINT_AND_PASSTHROUGH}, // IDE 0
+ v3_generic_add_port_range(generic, 0x1f0, 0x1f8, GENERIC_PRINT_AND_PASSTHROUGH); // IDE 0
+ v3_generic_add_port_range(generic, 0x3f6, 0x3f7, GENERIC_PRINT_AND_PASSTHROUGH); // IDE 0
#endif
-
+
#if 0
-
+
// Make the floppy controllers invisible
-
- {0x3f0, 0x3f2, GENERIC_PRINT_AND_IGNORE}, // Primary floppy controller (base,statusa/statusb,DOR)
- {0x3f4, 0x3f5, GENERIC_PRINT_AND_IGNORE}, // Primary floppy controller (mainstat/datarate,data)
- {0x3f7, 0x3f7, GENERIC_PRINT_AND_IGNORE}, // Primary floppy controller (DIR)
- {0x370, 0x372, GENERIC_PRINT_AND_IGNORE}, // Secondary floppy controller (base,statusa/statusb,DOR)
- {0x374, 0x375, GENERIC_PRINT_AND_IGNORE}, // Secondary floppy controller (mainstat/datarate,data)
- {0x377, 0x377, GENERIC_PRINT_AND_IGNORE}, // Secondary floppy controller (DIR)
+
+ v3_generic_add_port_range(generic, 0x3f0, 0x3f2, GENERIC_PRINT_AND_IGNORE); // Primary floppy controller (base,statusa/statusb,DOR)
+ v3_generic_add_port_range(generic, 0x3f4, 0x3f5, GENERIC_PRINT_AND_IGNORE); // Primary floppy controller (mainstat/datarate,data)
+ v3_generic_add_port_range(generic, 0x3f7, 0x3f7, GENERIC_PRINT_AND_IGNORE); // Primary floppy controller (DIR)
+ v3_generic_add_port_range(generic, 0x370, 0x372, GENERIC_PRINT_AND_IGNORE); // Secondary floppy controller (base,statusa/statusb,DOR)
+ v3_generic_add_port_range(generic, 0x374, 0x375, GENERIC_PRINT_AND_IGNORE); // Secondary floppy controller (mainstat/datarate,data)
+ v3_generic_add_port_range(generic, 0x377, 0x377, GENERIC_PRINT_AND_IGNORE); // Secondary floppy controller (DIR)
#endif
// Make the parallel port invisible
- {0x378, 0x37f, GENERIC_PRINT_AND_IGNORE},
+ v3_generic_add_port_range(generic, 0x378, 0x37f, GENERIC_PRINT_AND_IGNORE);
#endif
// Monitor graphics card operations
- {0x3b0, 0x3bb, GENERIC_PRINT_AND_PASSTHROUGH},
- {0x3c0, 0x3df, GENERIC_PRINT_AND_PASSTHROUGH},
+ v3_generic_add_port_range(generic, 0x3b0, 0x3bb, GENERIC_PRINT_AND_PASSTHROUGH);
+ v3_generic_add_port_range(generic, 0x3c0, 0x3df, GENERIC_PRINT_AND_PASSTHROUGH);
#endif
#if 1
// Make the ISA PNP features invisible
- {0x274, 0x277, GENERIC_PRINT_AND_IGNORE},
- {0x279, 0x279, GENERIC_PRINT_AND_IGNORE},
- {0xa79, 0xa79, GENERIC_PRINT_AND_IGNORE},
+ v3_generic_add_port_range(generic, 0x274, 0x277, GENERIC_PRINT_AND_IGNORE);
+ v3_generic_add_port_range(generic, 0x279, 0x279, GENERIC_PRINT_AND_IGNORE);
+ v3_generic_add_port_range(generic, 0xa79, 0xa79, GENERIC_PRINT_AND_IGNORE);
#endif
#if 1
// Monitor any network card (realtek ne2000) operations
- {0xc100, 0xc1ff, GENERIC_PRINT_AND_PASSTHROUGH},
+ v3_generic_add_port_range(generic, 0xc100, 0xc1ff, GENERIC_PRINT_AND_PASSTHROUGH);
#endif
#if 1
// Make any Bus master ide controller invisible
- {0xc000, 0xc00f, GENERIC_PRINT_AND_IGNORE},
+ v3_generic_add_port_range(generic, 0xc000, 0xc00f, GENERIC_PRINT_AND_IGNORE);
#endif
-
-
- // {0x378, 0x400, GENERIC_PRINT_AND_IGNORE}
- {0,0,0}, // sentinal - must be last
+ }
+ // v3_generic_add_port_range(generic, 0x378, 0x400, GENERIC_PRINT_AND_IGNORE);
- };
-
- struct vm_device * generic = create_generic(range, NULL, NULL);
-
-#endif
+
+
v3_attach_device(info, nvram);
//v3_attach_device(info, timer);
v3_attach_device(info, pic);
v3_attach_device(info, keyboard);
// v3_attach_device(info, serial);
-//Zheng 09/29/2008
-#ifdef RAMDISK_BOOT
- v3_attach_device(info, ramdisk);
-#endif
+ if (use_ramdisk) {
+ v3_attach_device(info, ramdisk);
+ }
-#if GENERIC
- // Important that this be attached last!
- v3_attach_device(info, generic);
-
-#endif
+ if (use_generic) {
+ // Important that this be attached last!
+ v3_attach_device(info, generic);
+ }
PrintDebugDevMgr(info);
}
// no longer needed since we have a keyboard device
//hook_irq(&vm_info, 1);
-#if 1
+#if 0
// give floppy controller to vm
v3_hook_irq_for_guest_injection(info, 6);
#endif
-#if 1
- //primary ide
- v3_hook_irq_for_guest_injection(info, 14);
-
-#endif
-#ifndef RAMDISK_BOOT
- // secondary ide
- v3_hook_irq_for_guest_injection(info, 15);
-#endif
+ if (!use_ramdisk) {
+ //primary ide
+ v3_hook_irq_for_guest_injection(info, 14);
+ // secondary ide
+ v3_hook_irq_for_guest_injection(info, 15);
+ }
//v3_hook_io_port(info, 1234, &IO_Read, NULL, info);
