+/*
+ * This file is part of the Palacios Virtual Machine Monitor developed
+ * by the V3VEE Project with funding from the United States National
+ * Science Foundation and the Department of Energy.
+ *
+ * The V3VEE Project is a joint project between Northwestern University
+ * and the University of New Mexico. You can find out more at
+ * http://www.v3vee.org
+ *
+ * Copyright (c) 2008, Jack Lange <jarusl@cs.northwestern.edu>
+ * Copyright (c) 2008, The V3VEE Project <http://www.v3vee.org>
+ * All rights reserved.
+ *
+ * Author: Jack Lange <jarusl@cs.northwestern.edu>
+ *
+ * This is free software. You are permitted to use,
+ * redistribute, and modify it as specified in the file "V3VEE_LICENSE".
+ */
+
+
+
+
#include <palacios/svm_io.h>
#include <palacios/vmm_io.h>
#include <palacios/vmm_ctrl_regs.h>
#include <palacios/vmm_decoder.h>
#include <palacios/vm_guest_mem.h>
+#ifndef DEBUG_IO
+#undef PrintDebug
+#define PrintDebug(fmt, args...)
+#endif
+
+
+
+
// This should package up an IO request and call vmm_handle_io
-int handle_svm_io_in(struct guest_info * info) {
+int v3_handle_svm_io_in(struct guest_info * info) {
vmcb_ctrl_t * ctrl_area = GET_VMCB_CTRL_AREA((vmcb_t *)(info->vmm_data));
// vmcb_saved_state_t * guest_state = GET_VMCB_SAVE_STATE_AREA((vmcb_t*)(info->vmm_data));
struct svm_io_info * io_info = (struct svm_io_info *)&(ctrl_area->exit_info1);
- vmm_io_hook_t * hook = get_io_hook(&(info->io_map), io_info->port);
- uint_t read_size = 0;
+ struct vmm_io_hook * hook = v3_get_io_hook(&(info->io_map), io_info->port);
+ int read_size = 0;
if (hook == NULL) {
- PrintDebug("Hook Not present for in on port %x\n", io_info->port);
+ PrintError("Hook Not present for in on port %x\n", io_info->port);
// error, we should not have exited on this port
return -1;
}
if (hook->read(io_info->port, &(info->vm_regs.rax), read_size, hook->priv_data) != read_size) {
// not sure how we handle errors.....
- PrintDebug("Read Failure for in on port %x\n", io_info->port);
+ PrintError("Read Failure for in on port %x\n", io_info->port);
return -1;
}
/* We might not handle wrap around of the RDI register correctly...
* In that if we do wrap around the effect will manifest in the higher bits of the register
*/
-int handle_svm_io_ins(struct guest_info * info) {
+int v3_handle_svm_io_ins(struct guest_info * info) {
vmcb_ctrl_t * ctrl_area = GET_VMCB_CTRL_AREA((vmcb_t *)(info->vmm_data));
vmcb_saved_state_t * guest_state = GET_VMCB_SAVE_STATE_AREA((vmcb_t*)(info->vmm_data));
struct svm_io_info * io_info = (struct svm_io_info *)&(ctrl_area->exit_info1);
- vmm_io_hook_t * hook = get_io_hook(&(info->io_map), io_info->port);
- uint_t read_size = 0;
+ struct vmm_io_hook * hook = v3_get_io_hook(&(info->io_map), io_info->port);
+ int read_size = 0;
addr_t dst_addr = 0;
uint_t rep_num = 1;
if (hook == NULL) {
- PrintDebug("Hook Not present for ins on port %x\n", io_info->port);
+ PrintError("Hook Not present for ins on port %x\n", io_info->port);
// error, we should not have exited on this port
return -1;
}
+ struct v3_segment *theseg = &(info->segments.es); // default is ES
+
+ addr_t inst_ptr;
+
+ if (guest_va_to_host_va(info, get_addr_linear(info, info->rip, &(info->segments.cs)), &inst_ptr) == -1) {
+ PrintError("Can't access instruction\n");
+ return -1;
+ }
+
+ while (is_prefix_byte(*((char*)inst_ptr))) {
+ switch (*((char*)inst_ptr)) {
+ case PREFIX_CS_OVERRIDE:
+ theseg = &(info->segments.cs);
+ break;
+ case PREFIX_SS_OVERRIDE:
+ theseg = &(info->segments.ss);
+ break;
+ case PREFIX_DS_OVERRIDE:
+ theseg = &(info->segments.ds);
+ break;
+ case PREFIX_ES_OVERRIDE:
+ theseg = &(info->segments.es);
+ break;
+ case PREFIX_FS_OVERRIDE:
+ theseg = &(info->segments.fs);
+ break;
+ case PREFIX_GS_OVERRIDE:
+ theseg = &(info->segments.gs);
+ break;
+ default:
+ break;
+ }
+ inst_ptr++;
+ }
+
+
PrintDebug("INS on port %d (0x%x)\n", io_info->port, io_info->port);
if (io_info->sz8) {
} else if (io_info->sz32) {
read_size = 4;
} else {
- PrintDebug("io_info Invalid Size\n");
+ PrintError("io_info Invalid Size\n");
return -1;
}
// This value should be set depending on the host register size...
mask = get_gpr_mask(info);
-
- PrintDebug("INS Aborted... Check implementation\n");
- return -1;
+ PrintDebug("INS io_info invalid address size, mask=0x%x, io_info=0x%x\n",mask,*((uint_t*)(io_info)));
+ // PrintDebug("INS Aborted... Check implementation\n");
+ //return -1;
}
if (io_info->rep) {
while (rep_num > 0) {
addr_t host_addr;
- dst_addr = get_addr_linear(info, info->vm_regs.rdi & mask, &(info->segments.es));
+ dst_addr = get_addr_linear(info, info->vm_regs.rdi & mask, theseg);
+ PrintDebug("Writing 0x%x\n", dst_addr);
+
if (guest_va_to_host_va(info, dst_addr, &host_addr) == -1) {
// either page fault or gpf...
- PrintDebug("Could not convert Guest VA to host VA\n");
+ PrintError("Could not convert Guest VA to host VA\n");
return -1;
}
if (hook->read(io_info->port, (char*)host_addr, read_size, hook->priv_data) != read_size) {
// not sure how we handle errors.....
- PrintDebug("Read Failure for ins on port %x\n", io_info->port);
+ PrintError("Read Failure for ins on port %x\n", io_info->port);
return -1;
}
return 0;
}
-int handle_svm_io_out(struct guest_info * info) {
+int v3_handle_svm_io_out(struct guest_info * info) {
vmcb_ctrl_t * ctrl_area = GET_VMCB_CTRL_AREA((vmcb_t *)(info->vmm_data));
// vmcb_saved_state_t * guest_state = GET_VMCB_SAVE_STATE_AREA((vmcb_t*)(info->vmm_data));
struct svm_io_info * io_info = (struct svm_io_info *)&(ctrl_area->exit_info1);
- vmm_io_hook_t * hook = get_io_hook(&(info->io_map), io_info->port);
- uint_t write_size = 0;
+ struct vmm_io_hook * hook = v3_get_io_hook(&(info->io_map), io_info->port);
+ int write_size = 0;
if (hook == NULL) {
- PrintDebug("Hook Not present for out on port %x\n", io_info->port);
+ PrintError("Hook Not present for out on port %x\n", io_info->port);
// error, we should not have exited on this port
return -1;
}
if (hook->write(io_info->port, &(info->vm_regs.rax), write_size, hook->priv_data) != write_size) {
// not sure how we handle errors.....
- PrintDebug("Write Failure for out on port %x\n", io_info->port);
+ PrintError("Write Failure for out on port %x\n", io_info->port);
return -1;
}
* In that if we do wrap around the effect will manifest in the higher bits of the register
*/
-int handle_svm_io_outs(struct guest_info * info) {
+int v3_handle_svm_io_outs(struct guest_info * info) {
vmcb_ctrl_t * ctrl_area = GET_VMCB_CTRL_AREA((vmcb_t *)(info->vmm_data));
vmcb_saved_state_t * guest_state = GET_VMCB_SAVE_STATE_AREA((vmcb_t*)(info->vmm_data));
+
struct svm_io_info * io_info = (struct svm_io_info *)&(ctrl_area->exit_info1);
- vmm_io_hook_t * hook = get_io_hook(&(info->io_map), io_info->port);
- uint_t write_size = 0;
+ struct vmm_io_hook * hook = v3_get_io_hook(&(info->io_map), io_info->port);
+ int write_size = 0;
addr_t dst_addr = 0;
uint_t rep_num = 1;
if (hook == NULL) {
- PrintDebug("Hook Not present for outs on port %x\n", io_info->port);
+ PrintError("Hook Not present for outs on port %x\n", io_info->port);
// error, we should not have exited on this port
return -1;
}
} else if (io_info->addr64) {
mask = 0xffffffffffffffffLL;
} else {
+ // This value should be set depending on the host register size...
+ mask = get_gpr_mask(info);
+
+ PrintDebug("OUTS io_info invalid address size, mask=0x%, io_info=0x%x\n",mask,*((uint_t*)(io_info)));
+ // PrintDebug("INS Aborted... Check implementation\n");
+ //return -1;
// should never happen
- PrintDebug("Invalid Address length\n");
- return -1;
+ //PrintDebug("Invalid Address length\n");
+ //return -1;
}
if (io_info->rep) {
rep_num = info->vm_regs.rcx & mask;
}
+ struct v3_segment *theseg = &(info->segments.es); // default is ES
+
+ addr_t inst_ptr;
+
+ if (guest_va_to_host_va(info,get_addr_linear(info,info->rip,&(info->segments.cs)),&inst_ptr)==-1) {
+ PrintError("Can't access instruction\n");
+ return -1;
+ }
+
+ while (is_prefix_byte(*((char*)inst_ptr))) {
+ switch (*((char*)inst_ptr)) {
+ case PREFIX_CS_OVERRIDE:
+ theseg = &(info->segments.cs);
+ break;
+ case PREFIX_SS_OVERRIDE:
+ theseg = &(info->segments.ss);
+ break;
+ case PREFIX_DS_OVERRIDE:
+ theseg = &(info->segments.ds);
+ break;
+ case PREFIX_ES_OVERRIDE:
+ theseg = &(info->segments.es);
+ break;
+ case PREFIX_FS_OVERRIDE:
+ theseg = &(info->segments.fs);
+ break;
+ case PREFIX_GS_OVERRIDE:
+ theseg = &(info->segments.gs);
+ break;
+ default:
+ break;
+ }
+ inst_ptr++;
+ }
+
+ PrintDebug("OUTS size=%d for %d steps\n", write_size, rep_num);
while (rep_num > 0) {
addr_t host_addr;
- dst_addr = get_addr_linear(info, (info->vm_regs.rsi & mask), &(info->segments.ds));
+
+
+
+ dst_addr = get_addr_linear(info, (info->vm_regs.rsi & mask), theseg);
if (guest_va_to_host_va(info, dst_addr, &host_addr) == -1) {
// either page fault or gpf...
if (hook->write(io_info->port, (char*)host_addr, write_size, hook->priv_data) != write_size) {
// not sure how we handle errors.....
- PrintDebug("Write Failure for outs on port %x\n", io_info->port);
+ PrintError("Write Failure for outs on port %x\n", io_info->port);
return -1;
}
