#include <geekos/svm_io.h>
#include <geekos/vmm_io.h>
-
+#include <geekos/vmm_ctrl_regs.h>
+#include <geekos/vmm_emulate.h>
+#include <geekos/vm_guest_mem.h>
// This should package up an IO request and call vmm_handle_io
}
- if (hook->read(io_info->port, &(info->vm_regs.rax), read_size, read_size) != read_size) {
+ if (hook->read(io_info->port, &(info->vm_regs.rax), read_size) != read_size) {
// not sure how we handle errors.....
return -1;
}
}
+
+
+
+/* We might not handle wrap around of the RDI register correctly...
+ * In that if we do wrap around the effect will manifest in the higher bits of the register
+ */
int handle_svm_io_ins(struct guest_info * info) {
+ vmcb_ctrl_t * ctrl_area = GET_VMCB_CTRL_AREA((vmcb_t *)(info->vmm_data));
+ vmcb_saved_state_t * guest_state = GET_VMCB_SAVE_STATE_AREA((vmcb_t*)(info->vmm_data));
+
+ struct svm_io_info * io_info = (struct svm_io_info *)&(ctrl_area->exit_info1);
+
+ vmm_io_hook_t * hook = get_io_hook(&(info->io_map), io_info->port);
+ uint_t read_size = 0;
+ addr_t base_addr = guest_state->es.base;
+ addr_t dst_addr = 0;
+ uint_t rep_num = 1;
+ ullong_t mask = 0;
+
+ // This is kind of hacky...
+ // direction can equal either 1 or -1
+ // We will multiply the final added offset by this value to go the correct direction
+ int direction = 1;
+ struct rflags * flags = (struct rflags *)&(guest_state->rflags);
+ if (flags->df) {
+ direction = -1;
+ }
+
+
+ if (hook == NULL) {
+ // error, we should not have exited on this port
+ return -1;
+ }
+
+ PrintDebug("INS on port %d (0x%x)\n", io_info->port, io_info->port);
+
+ if (io_info->sz8) {
+ read_size = 1;
+ } else if (io_info->sz16) {
+ read_size = 2;
+ } else if (io_info->sz32) {
+ read_size = 4;
+ }
+
+
+ if (io_info->addr16) {
+ mask = 0xffff;
+ } else if (io_info->addr32) {
+ mask = 0xffffffff;
+ } else if (io_info->addr64) {
+ mask = 0xffffffffffffffffLL;
+ } else {
+ // should never happen
+ return -1;
+ }
+
+ if (io_info->rep) {
+ rep_num = info->vm_regs.rcx & mask;
+ }
+
- // PrintDebug("INS on port %d (0x%x)\n", io_info->port, io_info->port);
- return -1;
+ while (rep_num > 0) {
+ addr_t host_addr;
+ dst_addr = base_addr + (info->vm_regs.rdi & mask);
+
+ if (guest_va_to_host_va(info, dst_addr, &host_addr) == -1) {
+ // either page fault or gpf...
+ }
+ if (hook->read(io_info->port, (char*)host_addr, read_size) != read_size) {
+ // not sure how we handle errors.....
+ return -1;
+ }
+
+ info->vm_regs.rdi += read_size * direction;
+
+ if (io_info->rep)
+ info->vm_regs.rcx--;
+
+ rep_num--;
+ }
+
+
+ info->rip = ctrl_area->exit_info2;
+
+ return 0;
}
int handle_svm_io_out(struct guest_info * info) {
}
- if (hook->write(io_info->port, &(info->vm_regs.rax), write_size, write_size) != write_size) {
+ if (hook->write(io_info->port, &(info->vm_regs.rax), write_size) != write_size) {
// not sure how we handle errors.....
return -1;
}
}
+/* We might not handle wrap around of the RSI register correctly...
+ * In that if we do wrap around the effect will manifest in the higher bits of the register
+ */
+
int handle_svm_io_outs(struct guest_info * info) {
- return -1;
+ vmcb_ctrl_t * ctrl_area = GET_VMCB_CTRL_AREA((vmcb_t *)(info->vmm_data));
+ vmcb_saved_state_t * guest_state = GET_VMCB_SAVE_STATE_AREA((vmcb_t*)(info->vmm_data));
+
+ struct svm_io_info * io_info = (struct svm_io_info *)&(ctrl_area->exit_info1);
+
+ vmm_io_hook_t * hook = get_io_hook(&(info->io_map), io_info->port);
+ uint_t write_size = 0;
+ addr_t base_addr = guest_state->ds.base;
+ addr_t dst_addr = 0;
+ uint_t rep_num = 1;
+ ullong_t mask = 0;
+
+ // This is kind of hacky...
+ // direction can equal either 1 or -1
+ // We will multiply the final added offset by this value to go the correct direction
+ int direction = 1;
+ struct rflags * flags = (struct rflags *)&(guest_state->rflags);
+ if (flags->df) {
+ direction = -1;
+ }
+
+
+ if (hook == NULL) {
+ // error, we should not have exited on this port
+ return -1;
+ }
+
+ PrintDebug("OUTS on port %d (0x%x)\n", io_info->port, io_info->port);
+
+ if (io_info->sz8) {
+ write_size = 1;
+ } else if (io_info->sz16) {
+ write_size = 2;
+ } else if (io_info->sz32) {
+ write_size = 4;
+ }
+
+
+ if (io_info->addr16) {
+ mask = 0xffff;
+ } else if (io_info->addr32) {
+ mask = 0xffffffff;
+ } else if (io_info->addr64) {
+ mask = 0xffffffffffffffffLL;
+ } else {
+ // should never happen
+ return -1;
+ }
+
+ if (io_info->rep) {
+ rep_num = info->vm_regs.rcx & mask;
+ }
+
+
+ while (rep_num > 0) {
+ addr_t host_addr;
+ dst_addr = base_addr + (info->vm_regs.rsi & mask);
+
+ if (guest_va_to_host_va(info, dst_addr, &host_addr) == -1) {
+ // either page fault or gpf...
+ }
+
+ if (hook->write(io_info->port, (char*)host_addr, write_size) != write_size) {
+ // not sure how we handle errors.....
+ return -1;
+ }
+
+ info->vm_regs.rsi += write_size * direction;
+
+ if (io_info->rep)
+ info->vm_regs.rcx--;
+
+ rep_num--;
+ }
+
+
+ info->rip = ctrl_area->exit_info2;
+
+
+ return 0;
+
+
+
}