+/*
+ * This file is part of the Palacios Virtual Machine Monitor developed
+ * by the V3VEE Project with funding from the United States National
+ * Science Foundation and the Department of Energy.
+ *
+ * The V3VEE Project is a joint project between Northwestern University
+ * and the University of New Mexico. You can find out more at
+ * http://www.v3vee.org
+ *
+ * Copyright (c) 2008, Matt Wojcik
+ * Copyright (c) 2008, Peter Kamm
+ * Copyright (c) 2008, The V3VEE Project <http://www.v3vee.org>
+ * All rights reserved.
+ *
+ * Author: Matt Wojcik
+ * Author: Peter Kamm
+ *
+ * This is free software. You are permitted to use,
+ * redistribute, and modify it as specified in the file "V3VEE_LICENSE".
+ */
+
#include <geekos/ne2k.h>
#include <geekos/debug.h>
#include <geekos/io.h>
#include <geekos/irq.h>
#include <geekos/malloc.h>
#include <geekos/string.h>
+#include <uip/uip.h>
+#include <uip/uip_arp.h>
#define DEBUG 1
#define TX_START_BUFF 0x40
#define RX_START_BUFF 0x4c
#define RX_END_BUFF 0x80
-uint_t next = (RX_START_BUFF << 8);
+static uint_t next = (RX_START_BUFF << 8);
static uint_t received = 0;
static uint_t send_done = 1;
}
}
#endif
-#if 0
-static int NE2K_Transmit(struct NE2K_REGS *regs)
-{
- while(!send_done);
- send_done = 0;
-
- struct _CR * cr = (struct _CR*)&(regs->cr);
- uint_t packet_size = 80;
- regs->cr = 0x21;
- cr->stp = 0x0; //toggle start on
- cr->sta = 0x1;
- Out_Byte(NE2K_CR, regs->cr);
-
- // Read-before-write bug fix?
- Out_Byte(NE2K_RBCR0, 0x42);
- Out_Byte(NE2K_RBCR1, 0x00);
- Out_Byte(NE2K_RSAR0, 0x42);
- Out_Byte(NE2K_RSAR1, 0x00);
-
- cr->rd = 0x01; // set remote DMA to 'remote read'
- Out_Byte(NE2K_CR, regs->cr);
-
- regs->isr = 0x40; // clear and set Remote DMA high
- Out_Byte(NE2K_ISR, regs->isr);
-
- Out_Byte(NE2K_RBCR0, packet_size);
- Out_Byte(NE2K_RBCR1, 0x00);
-
- Out_Byte(NE2K_TBCR0, packet_size);
- Out_Byte(NE2K_TBCR1, 0x00);
- Out_Byte(NE2K_RSAR0, 0x00);
- Out_Byte(NE2K_RSAR1, 0x40);
-
- regs->cr = 0x16;
- Out_Byte(NE2K_CR, regs->cr);
-
- /* Begin pushing the packet into the dataport (located at 0x10 from the base address) */
- /* Destination address = 52:54:00:12:34:56 */
- Out_Word(NE2K_CR+0x10, 0x5452);
- Out_Word(NE2K_CR+0x10, 0x1200);
- Out_Word(NE2K_CR+0x10, 0x5634);
-
- /* Source address = 52:54:00:12:34:58 */
- Out_Word(NE2K_CR+0x10, 0x5452);
- Out_Word(NE2K_CR+0x10, 0x1200);
- Out_Word(NE2K_CR+0x10, 0x5834);
-
- /* Type length and data; currently random data */
- uint_t i;
- uint_t n = 0;
- for(i = 1; i <= packet_size/2-12; i++, n+=2) {
- //Out_Word(NE2K_CR+0x10, 0x0f0b);
- Out_Word(NE2K_CR+0x10, (n<<8) | (n+1));
- }
-
- //regs->isr = 0x40;
- //Out_Byte(NE2K_ISR, regs->isr); /* Do we need this here? */
-
- return 0;
-}
-#endif
static void NE2K_Interrupt_Handler(struct Interrupt_State * state)
{
+
Begin_IRQ(state);
PrintBoth("NIC Interrupt Occured!\n");
uchar_t isr_content = In_Byte(NE2K_ISR);
callbacks.packet_received = rcvd_fn;
PrintBoth("Initializing network card...\n");
- Out_Byte(NE2K_CR+0x1f, In_Byte(NE2K_CR+0x1f)); /* Reset? */
+ Out_Byte(NE2K_CR+0x1f, In_Byte(NE2K_CR+0x1f)); /* Reset */
regs = Malloc(sizeof(struct NE2K_REGS));
struct _CR * cr = (struct _CR *)&(regs->cr);
return 0;
}
+/*
+ * This function is called when there is data in uip_buf that's ready to be sent.
+ * uip_arp_out() is used to translate the destination IP address to a MAC address.
+ * If the corresponding MAC address isn't in the cache, the packet is replaced with
+ * an ARP packet, which is sent out instead. The original packet will need to be
+ * retransmitted at some point in the future.
+ */
+int NE2K_Transmit(uint_t size)
+{
+ uip_arp_out();
+ uchar_t *data;
+ data = Malloc(size);
+
+ /* Based on example code from the uIP documentation... */
+ if(size <= UIP_LLH_LEN + UIP_TCPIP_HLEN) {
+ memcpy(data, &uip_buf[0], size);
+ } else {
+ memcpy(data, &uip_buf[0], UIP_LLH_LEN + UIP_TCPIP_HLEN);
+ memcpy(data + UIP_LLH_LEN + UIP_TCPIP_HLEN, uip_appdata, size - UIP_TCPIP_HLEN - UIP_LLH_LEN);
+ }
+
+ /* Manually copy in the source MAC address for now. */
+ uchar_t src_addr[6] = { 0x52, 0x54, 0x00, 0x12, 0x34, 0x58 };
+ memcpy(data + 6, src_addr, 6);
+ if(*(data+12) != 0x08 || *(data+13) != 0x06)
+ {
+ /* This is not an ARP packet. Fill in te size of the packet manually. */
+ *(data+12) = size & 0xff;
+ *(data+13) = (size >> 8) & 0xff;
+ }
+
+ NE2K_Send_Packet(data, size);
+ Free(data);
+ return 0;
+}
+
+int NE2K_Send_Packet(uchar_t *packet, uint_t size)
+{
+ struct _CR * cr = (struct _CR*)&(regs->cr);
+ regs->cr = 0x21; /* Turn off remote DMA, stop command */
+ cr->stp = 0x0; /* toggle start on */
+ cr->sta = 0x1;
+ Out_Byte(NE2K_CR, regs->cr);
+
+ // Read-before-write bug fix?
+ Out_Byte(NE2K_RBCR0, 0x42);
+ Out_Byte(NE2K_RBCR1, 0x00);
+ Out_Byte(NE2K_RSAR0, 0x42);
+ Out_Byte(NE2K_RSAR1, 0x00);
+
+ cr->rd = 0x01; /* set remote DMA to 'remote read' */
+ Out_Byte(NE2K_CR, regs->cr);
+
+ regs->isr = 0x40; /* clear 'remote DMA complete' interrupt */
+ Out_Byte(NE2K_ISR, regs->isr);
+
+ /* Set remote byte count registers */
+ Out_Byte(NE2K_RBCR0, size & 0xff);
+ Out_Byte(NE2K_RBCR1, (size >> 8) & 0xff);
+
+ /* Set transmit byte count registers. */
+ Out_Byte(NE2K_TBCR0, size & 0xff);
+ Out_Byte(NE2K_TBCR1, (size >> 8) & 0xff);
+
+ /* Set remote start address registers to the first page of the transmit ring buffer. */
+ Out_Byte(NE2K_RSAR0, 0x00);
+ Out_Byte(NE2K_RSAR1, TX_START_BUFF);
+
+ cr->rd = 0x02; /* Set remote DMA to 'remote write' */
+ Out_Byte(NE2K_CR, regs->cr);
+
+ /* Push the packet data to into the dataport */
+ uint_t i;
+ for(i = 0; i < size; i += 2) {
+ Out_Word(NE2K_CR + 0x10, (*(packet + i + 1) << 8) | *(packet + i));
+ }
+
+ cr->txp = 0x1; /* Start transmission */
+ Out_Byte(NE2K_CR, regs->cr);
+
+ return 0;
+}
+
+#if 1
/* Assumes src and dest are arrays of 6 characters. */
int NE2K_Send(uchar_t src[], uchar_t dest[], uint_t type, uchar_t *data, uint_t size)
{
struct _CR * cr = (struct _CR*)&(regs->cr);
uint_t packet_size = size + 16;
regs->cr = 0x21; /* Turn off remote DMA, stop command */
- cr->stp = 0x0; //toggle start on
+ cr->stp = 0x0; /* toggle start on */
cr->sta = 0x1;
Out_Byte(NE2K_CR, regs->cr);
Out_Byte(NE2K_RSAR0, 0x42);
Out_Byte(NE2K_RSAR1, 0x00);
- cr->rd = 0x01; // set remote DMA to 'remote read'
+ cr->rd = 0x01; /* set remote DMA to 'remote read' */
Out_Byte(NE2K_CR, regs->cr);
- regs->isr = 0x40; // clear and set Remote DMA high
+ regs->isr = 0x40; /* clear 'remote DMA complete' interrupt */
Out_Byte(NE2K_ISR, regs->isr);
/* Set remote byte count registers */
Out_Byte(NE2K_TBCR0, packet_size & 0xff);
Out_Byte(NE2K_TBCR1, (packet_size >> 8) & 0xff);
+ /* Set remote start address registers to the first page of the transmit ring buffer. */
Out_Byte(NE2K_RSAR0, 0x00);
Out_Byte(NE2K_RSAR1, TX_START_BUFF);
- cr->rd = 0x02; /* Set remote DMA to write */
+ cr->rd = 0x02; /* Set remote DMA to 'remote write' */
Out_Byte(NE2K_CR, regs->cr);
+ /* Begin pushing the packet into the dataport (located at 0x10 from the base address). */
/* Destination Address */
Out_Word(NE2K_CR + 0x10, (dest[1] << 8) | dest[0]);
Out_Word(NE2K_CR + 0x10, (dest[3] << 8) | dest[2]);
/* Type */
Out_Word(NE2K_CR + 0x10, packet_size);
+ /* Packet data */
uint_t i;
for(i = 0; i < size; i += 2) {
Out_Word(NE2K_CR + 0x10, (*(data + i + 1) << 8) | *(data + i));
return 0;
}
+#endif
int NE2K_Receive()
{
uint_t i;
uint_t data;
- PrintBoth("\nPacket data:\n\t");
-
data = In_Word(NE2K_CR + 0x10);
+
+#if DEBUG
+ PrintBoth("\nPacket data:\n\t");
PrintBoth("%x ", data);
+#endif
/* Get the location of the next packet */
next = data & 0xff00;
