+++ /dev/null
-/*
- * This file is part of the Palacios Virtual Machine Monitor developed
- * by the V3VEE Project with funding from the United States National
- * Science Foundation and the Department of Energy.
- *
- * The V3VEE Project is a joint project between Northwestern University
- * and the University of New Mexico. You can find out more at
- * http://www.v3vee.org
- *
- * Copyright (c) 2008, Jack Lange <jarusl@cs.northwestern.edu>
- * Copyright (c) 2008, The V3VEE Project <http://www.v3vee.org>
- * All rights reserved.
- *
- * Author: Jack Lange <jarusl@cs.northwestern.edu>
- *
- * This is free software. You are permitted to use,
- * redistribute, and modify it as specified in the file "V3VEE_LICENSE".
- */
-
-#include <palacios/vmm.h>
-#include <devices/net_cd.h>
-#include <devices/ide.h>
-#include <palacios/vmm_socket.h>
-
-#ifndef CONFIG_DEBUG_IDE
-#undef PrintDebug
-#define PrintDebug(fmt, args...)
-#endif
-
-
-#define NBD_READ_CMD 0x1
-#define NBD_WRITE_CMD 0x2
-#define NBD_CAPACITY_CMD 0x3
-
-#define NBD_STATUS_OK 0x00
-#define NBD_STATUS_ERR 0xff
-
-struct cd_state {
- uint64_t capacity; // in bytes
-
- int socket;
-
- uint32_t ip_addr;
- uint16_t port;
-
- char disk_name[32];
-
- struct vm_device * ide;
-
- uint_t bus;
- uint_t drive;
-};
-
-
-static int send_all(int socket, char * buf, int length) {
- int bytes_sent = 0;
-
- PrintDebug("Sending %d bytes\n", length - bytes_sent);
- while (bytes_sent < length) {
- int tmp_bytes = V3_Send(socket, buf + bytes_sent, length - bytes_sent);
- PrintDebug("Sent %d bytes\n", tmp_bytes);
-
- if (tmp_bytes == 0) {
- PrintError("Connection Closed unexpectedly\n");
- return -1;
- }
-
- bytes_sent += tmp_bytes;
- }
-
- return 0;
-}
-
-
-static int recv_all(int socket, char * buf, int length) {
- int bytes_read = 0;
-
- PrintDebug("Reading %d bytes\n", length - bytes_read);
- while (bytes_read < length) {
- int tmp_bytes = V3_Recv(socket, buf + bytes_read, length - bytes_read);
- PrintDebug("Received %d bytes\n", tmp_bytes);
-
- if (tmp_bytes == 0) {
- PrintError("Connection Closed unexpectedly\n");
- return -1;
- }
-
- bytes_read += tmp_bytes;
- }
-
- return 0;
-}
-
-// CDs always read 2048 byte blocks... ?
-static int cd_read(uint8_t * buf, int block_count, uint64_t lba, void * private_data) {
- struct vm_device * cd_dev = (struct vm_device *)private_data;
- struct cd_state * cd = (struct cd_state *)(cd_dev->private_data);
- uint64_t offset = lba * ATAPI_BLOCK_SIZE;
- int length = block_count * ATAPI_BLOCK_SIZE;
- uint8_t status;
- uint32_t ret_len = 0;
- char nbd_cmd[4] = {0,0,0,0};
-
- nbd_cmd[0] = NBD_READ_CMD;
-
- if (send_all(cd->socket, nbd_cmd, 4) == -1) {
- PrintError("Error sending capacity command\n");
- return -1;
- }
-
- if (send_all(cd->socket, (char *)&offset, 8) == -1) {
- PrintError("Error sending read offset\n");
- return -1;
- }
-
- if (send_all(cd->socket, (char *)&length, 4) == -1) {
- PrintError("Error sending read length\n");
- return -1;
- }
-
- if (recv_all(cd->socket, (char *)&status, 1) == -1) {
- PrintError("Error receiving status\n");
- return -1;
- }
-
- if (status != NBD_STATUS_OK) {
- PrintError("NBD Error....\n");
- return -1;
- }
-
- PrintDebug("Reading Data Ret Length\n");
-
- if (recv_all(cd->socket, (char *)&ret_len, 4) == -1) {
- PrintError("Error receiving Return read length\n");
- return -1;
- }
-
- if (ret_len != length) {
- PrintError("Read length mismatch (req=%d) (result=%d)\n", length, ret_len);
- return -1;
- }
-
- PrintDebug("Reading Data (%d bytes)\n", ret_len);
-
- if (recv_all(cd->socket, (char *)buf, ret_len) == -1) {
- PrintError("Read Data Error\n");
- return -1;
- }
-
- return 0;
-}
-
-
-static uint32_t cd_get_capacity(void * private_data) {
- struct vm_device * cd_dev = (struct vm_device *)private_data;
- struct cd_state * cd = (struct cd_state *)(cd_dev->private_data);
-
- return cd->capacity / ATAPI_BLOCK_SIZE;
-}
-
-static struct v3_cd_ops cd_ops = {
- .read = cd_read,
- .get_capacity = cd_get_capacity,
-};
-
-
-
-
-static int cd_free(struct vm_device * dev) {
- return 0;
-}
-
-static struct v3_device_ops dev_ops = {
- .free = cd_free,
- .reset = NULL,
- .start = NULL,
- .stop = NULL,
-};
-
-
-
-static int socket_init(struct cd_state * cd) {
- char header[64];
-
- PrintDebug("Intializing Net CD\n");
-
- cd->socket = V3_Create_TCP_Socket();
-
- PrintDebug("CD socket: %d\n", cd->socket);
- PrintDebug("Connecting to: %s:%d\n", v3_inet_ntoa(cd->ip_addr), cd->port);
-
- V3_Connect_To_IP(cd->socket, v3_ntohl(cd->ip_addr), cd->port);
-
-
- PrintDebug("Connected to NBD server\n");
-
- //snprintf(header, 64, "V3_NBD_1 %s\n", cd->disk_name);
- strcpy(header, "V3_NBD_1 ");
- strncat(header, cd->disk_name, 32);
- strncat(header, "\n", 1);
-
-
- if (send_all(cd->socket, header, strlen(header)) == -1) {
- PrintError("Error connecting to Network Block Device: %s\n", cd->disk_name);
- return -1;
- }
-
- // Cache Capacity
- {
- char nbd_cmd[4] = {0,0,0,0};
-
- nbd_cmd[0] = NBD_CAPACITY_CMD;
-
- if (send_all(cd->socket, nbd_cmd, 4) == -1) {
- PrintError("Error sending capacity command\n");
- return -1;
- }
-
- if (recv_all(cd->socket, (char *)&(cd->capacity), 8) == -1) {
- PrintError("Error Receiving Capacity\n");
- return -1;
- }
-
- PrintDebug("Capacity: %p\n", (void *)(cd->capacity));
- }
-
- return 0;
-}
-
-static int cd_init(struct guest_info * vm, void * cfg_data) {
- struct net_cd_cfg * cfg = (struct net_cd_cfg *)cfg_data;
- struct cd_state * cd = (struct cd_state *)V3_Malloc(sizeof(struct cd_state));
-
- PrintDebug("Registering Net CD at %s:%d disk=%s\n", cfg->ip_str, cfg->port, cfg->disk_tag);
-
- strncpy(cd->disk_name, cfg->disk_tag, sizeof(cd->disk_name));
- cd->ip_addr = v3_inet_addr(cfg->ip_str);
- cd->port = cfg->port;
-
- cd->ide = (struct vm_device * )v3_find_dev(vm, cfg->ide);
-
- if (cd->ide == 0) {
- PrintError("Could not find backend %s\n", cfg->ide);
- return -1;
- }
-
- cd->bus = cfg->bus;
- cd->drive = cfg->drive;
-
- struct vm_device * dev = v3_allocate_device("NET-CD", &dev_ops, cd);
-
-
- if (v3_attach_device(vm, dev) == -1) {
- PrintError("Could not attach device %s\n", "NET-CD");
- return -1;
- }
-
- if (socket_init(cd) == -1) {
- PrintError("Could not initialize socket connection\n");
- return -1;
- }
-
- PrintDebug("Registering CD\n");
-
- if (v3_ide_register_cdrom(cd->ide, cd->bus, cd->drive, "NET-CD", &cd_ops, dev) == -1) {
- return -1;
- }
-
- PrintDebug("intialization done\n");
-
- return 0;
-}
-
-
-
-
-device_register("NET-CD", cd_init)
