palacios/src/palacios/vmx.c

   1 /*
   2  * This file is part of the Palacios Virtual Machine Monitor developed
   3  * by the V3VEE Project with funding from the United States National
   4  * Science Foundation and the Department of Energy.
   5  *
   6  * The V3VEE Project is a joint project between Northwestern University
   7  * and the University of New Mexico.  You can find out more at
   8  * http://www.v3vee.org
   9  *
  10  * Copyright (c) 2008, Peter Dinda <pdinda@northwestern.edu>
  11  * Copyright (c) 2008, Jack Lange <jarusl@cs.northwestern.edu>
  12  * Copyright (c) 2008, The V3VEE Project <http://www.v3vee.org>
  13  * All rights reserved.
  14  *
  15  * Author: Peter Dinda <pdinda@northwestern.edu>
  16  *         Jack Lange <jarusl@cs.northwestern.edu>
  17  *
  18  * This is free software.  You are permitted to use,
  19  * redistribute, and modify it as specified in the file "V3VEE_LICENSE".
  20  */
  21
  22
  23 #include <palacios/vmx.h>
  24 #include <palacios/vmm.h>
  25 #include <palacios/vmx_handler.h>
  26 #include <palacios/vmcs.h>
  27 #include <palacios/vmx_lowlevel.h>
  28 #include <palacios/vmm_lowlevel.h>
  29 #include <palacios/vmm_ctrl_regs.h>
  30 #include <palacios/vmm_config.h>
  31 #include <palacios/vm_guest_mem.h>
  32 #include <palacios/vmm_direct_paging.h>
  33 #include <palacios/vmx_io.h>
  34 #include <palacios/vmx_msr.h>
  35
  36
  37 #ifndef CONFIG_DEBUG_VMX
  38 #undef PrintDebug
  39 #define PrintDebug(fmt, args...)
  40 #endif
  41
  42
  43 static addr_t host_vmcs_ptrs[CONFIG_MAX_CPUS] = { [0 ... CONFIG_MAX_CPUS - 1] = 0};
  44
  45
  46
  47 extern int v3_vmx_launch(struct v3_gprs * vm_regs, struct guest_info * info, struct v3_ctrl_regs * ctrl_regs);
  48 extern int v3_vmx_resume(struct v3_gprs * vm_regs, struct guest_info * info, struct v3_ctrl_regs * ctrl_regs);
  49
  50 static int inline check_vmcs_write(vmcs_field_t field, addr_t val) {
  51     int ret = 0;
  52
  53     ret = vmcs_write(field,val);
  54
  55     if (ret != VMX_SUCCESS) {
  56         PrintError("VMWRITE error on %s!: %d\n", v3_vmcs_field_to_str(field), ret);
  57         return 1;
  58     }
  59
  60     return 0;
  61 }
  62
  63 static int inline check_vmcs_read(vmcs_field_t field, void * val) {
  64     int ret = 0;
  65
  66     ret = vmcs_read(field, val);
  67
  68     if (ret != VMX_SUCCESS) {
  69         PrintError("VMREAD error on %s!: %d\n", v3_vmcs_field_to_str(field), ret);
  70     }
  71
  72     return ret;
  73 }
  74
  75 #if 0
  76 // For the 32 bit reserved bit fields
  77 // MB1s are in the low 32 bits, MBZs are in the high 32 bits of the MSR
  78 static uint32_t sanitize_bits1(uint32_t msr_num, uint32_t val) {
  79     v3_msr_t mask_msr;
  80
  81     PrintDebug("sanitize_bits1 (MSR:%x)\n", msr_num);
  82
  83     v3_get_msr(msr_num, &mask_msr.hi, &mask_msr.lo);
  84
  85     PrintDebug("MSR %x = %x : %x \n", msr_num, mask_msr.hi, mask_msr.lo);
  86
  87     val |= mask_msr.lo;
  88     val |= mask_msr.hi;
  89
  90     return val;
  91 }
  92
  93
  94
  95 static addr_t sanitize_bits2(uint32_t msr_num0, uint32_t msr_num1, addr_t val) {
  96     v3_msr_t msr0, msr1;
  97     addr_t msr0_val, msr1_val;
  98
  99     PrintDebug("sanitize_bits2 (MSR0=%x, MSR1=%x)\n", msr_num0, msr_num1);
 100
 101     v3_get_msr(msr_num0, &msr0.hi, &msr0.lo);
 102     v3_get_msr(msr_num1, &msr1.hi, &msr1.lo);
 103
 104     // This generates a mask that is the natural bit width of the CPU
 105     msr0_val = msr0.value;
 106     msr1_val = msr1.value;
 107
 108     PrintDebug("MSR %x = %p, %x = %p \n", msr_num0, (void*)msr0_val, msr_num1, (void*)msr1_val);
 109
 110     val |= msr0_val;
 111     val |= msr1_val;
 112
 113     return val;
 114 }
 115
 116
 117
 118 #endif
 119
 120
 121 static addr_t allocate_vmcs() {
 122     reg_ex_t msr;
 123     struct vmcs_data * vmcs_page = NULL;
 124
 125     PrintDebug("Allocating page\n");
 126
 127     vmcs_page = (struct vmcs_data *)V3_VAddr(V3_AllocPages(1));
 128     memset(vmcs_page, 0, 4096);
 129
 130     v3_get_msr(VMX_BASIC_MSR, &(msr.e_reg.high), &(msr.e_reg.low));
 131
 132     vmcs_page->revision = ((struct vmx_basic_msr*)&msr)->revision;
 133     PrintDebug("VMX Revision: 0x%x\n",vmcs_page->revision);
 134
 135     return (addr_t)V3_PAddr((void *)vmcs_page);
 136 }
 137
 138
 139
 140
 141 static int init_vmcs_bios(struct guest_info * info, struct vmx_data * vmx_state) {
 142     int vmx_ret = 0;
 143
 144     PrintDebug("Loading VMCS\n");
 145     vmx_ret = vmcs_load(vmx_state->vmcs_ptr_phys);
 146
 147     if (vmx_ret != VMX_SUCCESS) {
 148         PrintError("VMPTRLD failed\n");
 149         return -1;
 150     }
 151
 152
 153
 154     /******* Setup Host State **********/
 155
 156     /* Cache GDTR, IDTR, and TR in host struct */
 157     addr_t gdtr_base;
 158     struct {
 159         uint16_t selector;
 160         addr_t   base;
 161     } __attribute__((packed)) tmp_seg;
 162
 163
 164     __asm__ __volatile__(
 165                          "sgdt (%0);"
 166                          :
 167                          : "q"(&tmp_seg)
 168                          : "memory"
 169                          );
 170     gdtr_base = tmp_seg.base;
 171     vmx_state->host_state.gdtr.base = gdtr_base;
 172
 173     __asm__ __volatile__(
 174                          "sidt (%0);"
 175                          :
 176                          : "q"(&tmp_seg)
 177                          : "memory"
 178                          );
 179     vmx_state->host_state.idtr.base = tmp_seg.base;
 180
 181     __asm__ __volatile__(
 182                          "str (%0);"
 183                          :
 184                          : "q"(&tmp_seg)
 185                          : "memory"
 186                          );
 187     vmx_state->host_state.tr.selector = tmp_seg.selector;
 188
 189     /* The GDTR *index* is bits 3-15 of the selector. */
 190     struct tss_descriptor * desc = NULL;
 191     desc = (struct tss_descriptor *)(gdtr_base + (8 * (tmp_seg.selector >> 3)));
 192
 193     tmp_seg.base = ((desc->base1) |
 194                     (desc->base2 << 16) |
 195                     (desc->base3 << 24) |
 196 #ifdef __V3_64BIT__
 197                     ((uint64_t)desc->base4 << 32)
 198 #else
 199                     (0)
 200 #endif
 201                     );
 202
 203     vmx_state->host_state.tr.base = tmp_seg.base;
 204
 205
 206
 207     /********** Setup and VMX Control Fields from MSR ***********/
 208     /* Setup IO map */
 209
 210
 211     struct v3_msr tmp_msr;
 212
 213     v3_get_msr(VMX_PINBASED_CTLS_MSR, &(tmp_msr.hi), &(tmp_msr.lo));
 214
 215     /* Add external interrupts, NMI exiting, and virtual NMI */
 216     vmx_state->pin_ctrls.value =  tmp_msr.lo;
 217     vmx_state->pin_ctrls.nmi_exit = 1;
 218     vmx_state->pin_ctrls.ext_int_exit = 1;
 219
 220     v3_get_msr(VMX_PROCBASED_CTLS_MSR, &(tmp_msr.hi), &(tmp_msr.lo));
 221
 222     vmx_state->pri_proc_ctrls.value = tmp_msr.lo;
 223     vmx_state->pri_proc_ctrls.use_io_bitmap = 1;
 224     vmx_state->pri_proc_ctrls.hlt_exit = 1;
 225     vmx_state->pri_proc_ctrls.invlpg_exit = 1;
 226     vmx_state->pri_proc_ctrls.use_msr_bitmap = 1;
 227     vmx_state->pri_proc_ctrls.pause_exit = 1;
 228     vmx_state->pri_proc_ctrls.tsc_offset = 1;
 229 #ifdef CONFIG_TIME_VIRTUALIZE_TSC
 230     vmx_state->pri_proc_ctrls.rdtsc_exit = 1;
 231 #endif
 232
 233     vmx_ret |= check_vmcs_write(VMCS_IO_BITMAP_A_ADDR, (addr_t)V3_PAddr(info->vm_info->io_map.arch_data));
 234     vmx_ret |= check_vmcs_write(VMCS_IO_BITMAP_B_ADDR,
 235             (addr_t)V3_PAddr(info->vm_info->io_map.arch_data) + PAGE_SIZE_4KB);
 236
 237
 238     vmx_ret |= check_vmcs_write(VMCS_MSR_BITMAP, (addr_t)V3_PAddr(info->vm_info->msr_map.arch_data));
 239
 240     v3_get_msr(VMX_EXIT_CTLS_MSR, &(tmp_msr.hi), &(tmp_msr.lo));
 241     vmx_state->exit_ctrls.value = tmp_msr.lo;
 242     vmx_state->exit_ctrls.host_64_on = 1;
 243
 244     if ((vmx_state->exit_ctrls.save_efer == 1) || (vmx_state->exit_ctrls.ld_efer == 1)) {
 245         vmx_state->ia32e_avail = 1;
 246     }
 247
 248     v3_get_msr(VMX_ENTRY_CTLS_MSR, &(tmp_msr.hi), &(tmp_msr.lo));
 249     vmx_state->entry_ctrls.value = tmp_msr.lo;
 250
 251     {
 252         struct vmx_exception_bitmap excp_bmap;
 253         excp_bmap.value = 0;
 254
 255         excp_bmap.pf = 1;
 256
 257         vmx_ret |= check_vmcs_write(VMCS_EXCP_BITMAP, excp_bmap.value);
 258     }
 259     /******* Setup VMXAssist guest state ***********/
 260
 261     info->rip = 0xd0000;
 262     info->vm_regs.rsp = 0x80000;
 263
 264     struct rflags * flags = (struct rflags *)&(info->ctrl_regs.rflags);
 265     flags->rsvd1 = 1;
 266
 267     /* Print Control MSRs */
 268     v3_get_msr(VMX_CR0_FIXED0_MSR, &(tmp_msr.hi), &(tmp_msr.lo));
 269     PrintDebug("CR0 MSR: %p\n", (void *)(addr_t)tmp_msr.value);
 270
 271     v3_get_msr(VMX_CR4_FIXED0_MSR, &(tmp_msr.hi), &(tmp_msr.lo));
 272     PrintDebug("CR4 MSR: %p\n", (void *)(addr_t)tmp_msr.value);
 273
 274
 275 #define GUEST_CR0 0x80000031
 276 #define GUEST_CR4 0x00002000
 277     info->ctrl_regs.cr0 = GUEST_CR0;
 278     info->ctrl_regs.cr4 = GUEST_CR4;
 279
 280     ((struct cr0_32 *)&(info->shdw_pg_state.guest_cr0))->pe = 1;
 281
 282     /* Setup paging */
 283     if (info->shdw_pg_mode == SHADOW_PAGING) {
 284         PrintDebug("Creating initial shadow page table\n");
 285
 286         if (v3_init_passthrough_pts(info) == -1) {
 287             PrintError("Could not initialize passthrough page tables\n");
 288             return -1;
 289         }
 290
 291 #define CR0_PE 0x00000001
 292 #define CR0_PG 0x80000000
 293
 294
 295         vmx_ret |= check_vmcs_write(VMCS_CR0_MASK, (CR0_PE | CR0_PG) );
 296         vmx_ret |= check_vmcs_write(VMCS_CR4_MASK, CR4_VMXE);
 297
 298         info->ctrl_regs.cr3 = info->direct_map_pt;
 299
 300         // vmx_state->pinbased_ctrls |= NMI_EXIT;
 301
 302         /* Add CR exits */
 303         vmx_state->pri_proc_ctrls.cr3_ld_exit = 1;
 304         vmx_state->pri_proc_ctrls.cr3_str_exit = 1;
 305     }
 306
 307     // Setup segment registers
 308     {
 309         struct v3_segment * seg_reg = (struct v3_segment *)&(info->segments);
 310
 311         int i;
 312
 313         for (i = 0; i < 10; i++) {
 314             seg_reg[i].selector = 3 << 3;
 315             seg_reg[i].limit = 0xffff;
 316             seg_reg[i].base = 0x0;
 317         }
 318
 319         info->segments.cs.selector = 2<<3;
 320
 321         /* Set only the segment registers */
 322         for (i = 0; i < 6; i++) {
 323             seg_reg[i].limit = 0xfffff;
 324             seg_reg[i].granularity = 1;
 325             seg_reg[i].type = 3;
 326             seg_reg[i].system = 1;
 327             seg_reg[i].dpl = 0;
 328             seg_reg[i].present = 1;
 329             seg_reg[i].db = 1;
 330         }
 331
 332         info->segments.cs.type = 0xb;
 333
 334         info->segments.ldtr.selector = 0x20;
 335         info->segments.ldtr.type = 2;
 336         info->segments.ldtr.system = 0;
 337         info->segments.ldtr.present = 1;
 338         info->segments.ldtr.granularity = 0;
 339
 340
 341         /************* Map in GDT and vmxassist *************/
 342
 343         uint64_t  gdt[] __attribute__ ((aligned(32))) = {
 344             0x0000000000000000ULL,              /* 0x00: reserved */
 345             0x0000830000000000ULL,              /* 0x08: 32-bit TSS */
 346             //0x0000890000000000ULL,            /* 0x08: 32-bit TSS */
 347             0x00CF9b000000FFFFULL,              /* 0x10: CS 32-bit */
 348             0x00CF93000000FFFFULL,              /* 0x18: DS 32-bit */
 349             0x000082000000FFFFULL,              /* 0x20: LDTR 32-bit */
 350         };
 351
 352 #define VMXASSIST_GDT   0x10000
 353         addr_t vmxassist_gdt = 0;
 354
 355         if (v3_gpa_to_hva(info, VMXASSIST_GDT, &vmxassist_gdt) == -1) {
 356             PrintError("Could not find VMXASSIST GDT destination\n");
 357             return -1;
 358         }
 359
 360         memcpy((void *)vmxassist_gdt, gdt, sizeof(uint64_t) * 5);
 361
 362         info->segments.gdtr.base = VMXASSIST_GDT;
 363
 364 #define VMXASSIST_TSS   0x40000
 365         uint64_t vmxassist_tss = VMXASSIST_TSS;
 366         gdt[0x08 / sizeof(gdt[0])] |=
 367             ((vmxassist_tss & 0xFF000000) << (56 - 24)) |
 368             ((vmxassist_tss & 0x00FF0000) << (32 - 16)) |
 369             ((vmxassist_tss & 0x0000FFFF) << (16)) |
 370             (8392 - 1);
 371
 372         info->segments.tr.selector = 0x08;
 373         info->segments.tr.base = vmxassist_tss;
 374
 375         //info->segments.tr.type = 0x9;
 376         info->segments.tr.type = 0x3;
 377         info->segments.tr.system = 0;
 378         info->segments.tr.present = 1;
 379         info->segments.tr.granularity = 0;
 380     }
 381
 382     // setup VMXASSIST
 383     {
 384 #define VMXASSIST_START 0x000d0000
 385         extern uint8_t v3_vmxassist_start[];
 386         extern uint8_t v3_vmxassist_end[];
 387         addr_t vmxassist_dst = 0;
 388
 389         if (v3_gpa_to_hva(info, VMXASSIST_START, &vmxassist_dst) == -1) {
 390             PrintError("Could not find VMXASSIST destination\n");
 391             return -1;
 392         }
 393
 394         memcpy((void *)vmxassist_dst, v3_vmxassist_start, v3_vmxassist_end - v3_vmxassist_start);
 395     }
 396
 397     /*** Write all the info to the VMCS ***/
 398
 399 #define DEBUGCTL_MSR 0x1d9
 400     v3_get_msr(DEBUGCTL_MSR, &(tmp_msr.hi), &(tmp_msr.lo));
 401     vmx_ret |= check_vmcs_write(VMCS_GUEST_DBG_CTL, tmp_msr.value);
 402
 403     info->dbg_regs.dr7 = 0x400;
 404
 405 #ifdef __V3_64BIT__
 406     vmx_ret |= check_vmcs_write(VMCS_LINK_PTR, (addr_t)0xffffffffffffffffULL);
 407 #else
 408     vmx_ret |= check_vmcs_write(VMCS_LINK_PTR, (addr_t)0xffffffffUL);
 409     vmx_ret |= check_vmcs_write(VMCS_LINK_PTR_HIGH, (addr_t)0xffffffffUL);
 410 #endif
 411
 412     if (v3_update_vmcs_ctrl_fields(info)) {
 413         PrintError("Could not write control fields!\n");
 414         return -1;
 415     }
 416
 417     if (v3_update_vmcs_host_state(info)) {
 418         PrintError("Could not write host state\n");
 419         return -1;
 420     }
 421
 422
 423     vmx_state->state = VMXASSIST_DISABLED;
 424
 425     return 0;
 426 }
 427
 428 int v3_init_vmx_vmcs(struct guest_info * info, v3_vm_class_t vm_class) {
 429     struct vmx_data * vmx_state = NULL;
 430     int vmx_ret = 0;
 431
 432     vmx_state = (struct vmx_data *)V3_Malloc(sizeof(struct vmx_data));
 433
 434     PrintDebug("vmx_data pointer: %p\n", (void *)vmx_state);
 435
 436     PrintDebug("Allocating VMCS\n");
 437     vmx_state->vmcs_ptr_phys = allocate_vmcs();
 438
 439     PrintDebug("VMCS pointer: %p\n", (void *)(vmx_state->vmcs_ptr_phys));
 440
 441     info->vmm_data = vmx_state;
 442
 443     PrintDebug("Initializing VMCS (addr=%p)\n", info->vmm_data);
 444
 445     // TODO: Fix vmcs fields so they're 32-bit
 446
 447     PrintDebug("Clearing VMCS: %p\n", (void *)vmx_state->vmcs_ptr_phys);
 448     vmx_ret = vmcs_clear(vmx_state->vmcs_ptr_phys);
 449
 450     if (vmx_ret != VMX_SUCCESS) {
 451         PrintError("VMCLEAR failed\n");
 452         return -1;
 453     }
 454
 455     if (vm_class == V3_PC_VM) {
 456         PrintDebug("Initializing VMCS\n");
 457         init_vmcs_bios(info, vmx_state);
 458     } else {
 459         PrintError("Invalid VM Class\n");
 460         return -1;
 461     }
 462
 463     return 0;
 464 }
 465
 466 static int update_irq_exit_state(struct guest_info * info) {
 467     struct vmx_exit_idt_vec_info idt_vec_info;
 468
 469     check_vmcs_read(VMCS_IDT_VECTOR_INFO, &(idt_vec_info.value));
 470
 471     if ((info->intr_core_state.irq_started == 1) && (idt_vec_info.valid == 0)) {
 472 #ifdef CONFIG_DEBUG_INTERRUPTS
 473         PrintDebug("Calling v3_injecting_intr\n");
 474 #endif
 475         info->intr_core_state.irq_started = 0;
 476         v3_injecting_intr(info, info->intr_core_state.irq_vector, V3_EXTERNAL_IRQ);
 477     }
 478
 479     return 0;
 480 }
 481
 482 static int update_irq_entry_state(struct guest_info * info) {
 483     struct vmx_exit_idt_vec_info idt_vec_info;
 484     struct vmcs_interrupt_state intr_core_state;
 485     struct vmx_data * vmx_info = (struct vmx_data *)(info->vmm_data);
 486
 487     check_vmcs_read(VMCS_IDT_VECTOR_INFO, &(idt_vec_info.value));
 488     check_vmcs_read(VMCS_GUEST_INT_STATE, &(intr_core_state));
 489
 490     /* Check for pending exceptions to inject */
 491     if (v3_excp_pending(info)) {
 492         struct vmx_entry_int_info int_info;
 493         int_info.value = 0;
 494
 495         // In VMX, almost every exception is hardware
 496         // Software exceptions are pretty much only for breakpoint or overflow
 497         int_info.type = 3;
 498         int_info.vector = v3_get_excp_number(info);
 499
 500         if (info->excp_state.excp_error_code_valid) {
 501             check_vmcs_write(VMCS_ENTRY_EXCP_ERR, info->excp_state.excp_error_code);
 502             int_info.error_code = 1;
 503
 504 #ifdef CONFIG_DEBUG_INTERRUPTS
 505             PrintDebug("Injecting exception %d with error code %x\n",
 506                     int_info.vector, info->excp_state.excp_error_code);
 507 #endif
 508         }
 509
 510         int_info.valid = 1;
 511 #ifdef CONFIG_DEBUG_INTERRUPTS
 512         PrintDebug("Injecting exception %d (EIP=%p)\n", int_info.vector, (void *)(addr_t)info->rip);
 513 #endif
 514         check_vmcs_write(VMCS_ENTRY_INT_INFO, int_info.value);
 515
 516         v3_injecting_excp(info, int_info.vector);
 517
 518     } else if ((((struct rflags *)&(info->ctrl_regs.rflags))->intr == 1) &&
 519                (intr_core_state.val == 0)) {
 520
 521         if ((info->intr_core_state.irq_started == 1) && (idt_vec_info.valid == 1)) {
 522
 523 #ifdef CONFIG_DEBUG_INTERRUPTS
 524             PrintDebug("IRQ pending from previous injection\n");
 525 #endif
 526
 527             // Copy the IDT vectoring info over to reinject the old interrupt
 528             if (idt_vec_info.error_code == 1) {
 529                 uint32_t err_code = 0;
 530
 531                 check_vmcs_read(VMCS_IDT_VECTOR_ERR, &err_code);
 532                 check_vmcs_write(VMCS_ENTRY_EXCP_ERR, err_code);
 533             }
 534
 535             idt_vec_info.undef = 0;
 536             check_vmcs_write(VMCS_ENTRY_INT_INFO, idt_vec_info.value);
 537
 538         } else {
 539             struct vmx_entry_int_info ent_int;
 540             ent_int.value = 0;
 541
 542             switch (v3_intr_pending(info)) {
 543                 case V3_EXTERNAL_IRQ: {
 544                     info->intr_core_state.irq_vector = v3_get_intr(info);
 545                     ent_int.vector = info->intr_core_state.irq_vector;
 546                     ent_int.type = 0;
 547                     ent_int.error_code = 0;
 548                     ent_int.valid = 1;
 549
 550 #ifdef CONFIG_DEBUG_INTERRUPTS
 551                     PrintDebug("Injecting Interrupt %d at exit %u(EIP=%p)\n",
 552                                info->intr_core_state.irq_vector,
 553                                (uint32_t)info->num_exits,
 554                                (void *)(addr_t)info->rip);
 555 #endif
 556
 557                     check_vmcs_write(VMCS_ENTRY_INT_INFO, ent_int.value);
 558                     info->intr_core_state.irq_started = 1;
 559
 560                     break;
 561                 }
 562                 case V3_NMI:
 563                     PrintDebug("Injecting NMI\n");
 564
 565                     ent_int.type = 2;
 566                     ent_int.vector = 2;
 567                     ent_int.valid = 1;
 568                     check_vmcs_write(VMCS_ENTRY_INT_INFO, ent_int.value);
 569
 570                     break;
 571                 case V3_SOFTWARE_INTR:
 572                     PrintDebug("Injecting software interrupt\n");
 573                     ent_int.type = 4;
 574
 575                     ent_int.valid = 1;
 576                     check_vmcs_write(VMCS_ENTRY_INT_INFO, ent_int.value);
 577
 578                     break;
 579                 case V3_VIRTUAL_IRQ:
 580                     // Not sure what to do here, Intel doesn't have virtual IRQs
 581                     // May be the same as external interrupts/IRQs
 582
 583                     break;
 584                 case V3_INVALID_INTR:
 585                 default:
 586                     break;
 587             }
 588         }
 589     } else if ((v3_intr_pending(info)) && (vmx_info->pri_proc_ctrls.int_wndw_exit == 0)) {
 590         // Enable INTR window exiting so we know when IF=1
 591         uint32_t instr_len;
 592
 593         check_vmcs_read(VMCS_EXIT_INSTR_LEN, &instr_len);
 594
 595 #ifdef CONFIG_DEBUG_INTERRUPTS
 596         PrintDebug("Enabling Interrupt-Window exiting: %d\n", instr_len);
 597 #endif
 598
 599         vmx_info->pri_proc_ctrls.int_wndw_exit = 1;
 600         check_vmcs_write(VMCS_PROC_CTRLS, vmx_info->pri_proc_ctrls.value);
 601     }
 602
 603
 604     return 0;
 605 }
 606
 607
 608
 609 static struct vmx_exit_info exit_log[10];
 610
 611 static void print_exit_log(struct guest_info * info) {
 612     int cnt = info->num_exits % 10;
 613     int i = 0;
 614
 615
 616     V3_Print("\nExit Log (%d total exits):\n", (uint32_t)info->num_exits);
 617
 618     for (i = 0; i < 10; i++) {
 619         struct vmx_exit_info * tmp = &exit_log[cnt];
 620
 621         V3_Print("%d:\texit_reason = %p\n", i, (void *)(addr_t)tmp->exit_reason);
 622         V3_Print("\texit_qual = %p\n", (void *)tmp->exit_qual);
 623         V3_Print("\tint_info = %p\n", (void *)(addr_t)tmp->int_info);
 624         V3_Print("\tint_err = %p\n", (void *)(addr_t)tmp->int_err);
 625         V3_Print("\tinstr_info = %p\n", (void *)(addr_t)tmp->instr_info);
 626
 627         cnt--;
 628
 629         if (cnt == -1) {
 630             cnt = 9;
 631         }
 632
 633     }
 634
 635 }
 636
 637 /*
 638  * CAUTION and DANGER!!!
 639  *
 640  * The VMCS CANNOT(!!) be accessed outside of the cli/sti calls inside this function
 641  * When exectuing a symbiotic call, the VMCS WILL be overwritten, so any dependencies
 642  * on its contents will cause things to break. The contents at the time of the exit WILL
 643  * change before the exit handler is executed.
 644  */
 645 int v3_vmx_enter(struct guest_info * info) {
 646     int ret = 0;
 647     uint32_t tsc_offset_low, tsc_offset_high;
 648     struct vmx_exit_info exit_info;
 649
 650     // Conditionally yield the CPU if the timeslice has expired
 651     v3_yield_cond(info);
 652
 653     // v3_print_guest_state(info);
 654
 655     // disable global interrupts for vm state transition
 656     v3_disable_ints();
 657
 658     v3_vmx_restore_vmcs(info);
 659
 660
 661 #ifdef CONFIG_SYMCALL
 662     if (info->sym_core_state.symcall_state.sym_call_active == 0) {
 663         update_irq_entry_state(info);
 664     }
 665 #else
 666     update_irq_entry_state(info);
 667 #endif
 668
 669     {
 670         addr_t guest_cr3;
 671         vmcs_read(VMCS_GUEST_CR3, &guest_cr3);
 672         vmcs_write(VMCS_GUEST_CR3, guest_cr3);
 673     }
 674
 675     v3_update_timers(info);
 676
 677     /* If this guest is frequency-lagged behind host time, wait
 678      * for the appropriate host time before resuming the guest. */
 679     v3_adjust_time(info);
 680
 681     tsc_offset_high = (uint32_t)((v3_tsc_host_offset(&info->time_state) >> 32) & 0xffffffff);
 682     tsc_offset_low = (uint32_t)(v3_tsc_host_offset(&info->time_state) & 0xffffffff);
 683     check_vmcs_write(VMCS_TSC_OFFSET_HIGH, tsc_offset_high);
 684     check_vmcs_write(VMCS_TSC_OFFSET, tsc_offset_low);
 685
 686     if (info->vm_info->run_state == VM_STOPPED) {
 687         info->vm_info->run_state = VM_RUNNING;
 688         ret = v3_vmx_launch(&(info->vm_regs), info, &(info->ctrl_regs));
 689     } else {
 690         ret = v3_vmx_resume(&(info->vm_regs), info, &(info->ctrl_regs));
 691     }
 692
 693     //  PrintDebug("VMX Exit: ret=%d\n", ret);
 694
 695     if (ret != VMX_SUCCESS) {
 696         uint32_t error = 0;
 697
 698         vmcs_read(VMCS_INSTR_ERR, &error);
 699         PrintError("VMENTRY Error: %d\n", error);
 700
 701         return -1;
 702     }
 703
 704     info->num_exits++;
 705
 706     /* Update guest state */
 707     v3_vmx_save_vmcs(info);
 708
 709     // info->cpl = info->segments.cs.selector & 0x3;
 710
 711     info->mem_mode = v3_get_vm_mem_mode(info);
 712     info->cpu_mode = v3_get_vm_cpu_mode(info);
 713
 714
 715     check_vmcs_read(VMCS_EXIT_INSTR_LEN, &(exit_info.instr_len));
 716     check_vmcs_read(VMCS_EXIT_INSTR_INFO, &(exit_info.instr_info));
 717     check_vmcs_read(VMCS_EXIT_REASON, &(exit_info.exit_reason));
 718     check_vmcs_read(VMCS_EXIT_QUAL, &(exit_info.exit_qual));
 719     check_vmcs_read(VMCS_EXIT_INT_INFO, &(exit_info.int_info));
 720     check_vmcs_read(VMCS_EXIT_INT_ERR, &(exit_info.int_err));
 721     check_vmcs_read(VMCS_GUEST_LINEAR_ADDR, &(exit_info.guest_linear_addr));
 722
 723     //PrintDebug("VMX Exit taken, id-qual: %u-%lu\n", exit_info.exit_reason, exit_info.exit_qual);
 724
 725     exit_log[info->num_exits % 10] = exit_info;
 726
 727
 728 #ifdef CONFIG_SYMCALL
 729     if (info->sym_core_state.symcall_state.sym_call_active == 0) {
 730         update_irq_exit_state(info);
 731     }
 732 #else
 733     update_irq_exit_state(info);
 734 #endif
 735
 736     // reenable global interrupts after vm exit
 737     v3_enable_ints();
 738
 739     // Conditionally yield the CPU if the timeslice has expired
 740     v3_yield_cond(info);
 741
 742     if (v3_handle_vmx_exit(info, &exit_info) == -1) {
 743         PrintError("Error in VMX exit handler\n");
 744         return -1;
 745     }
 746
 747     return 0;
 748 }
 749
 750
 751 int v3_start_vmx_guest(struct guest_info * info) {
 752
 753     PrintDebug("Starting VMX core %u\n", info->cpu_id);
 754
 755     if (info->cpu_id == 0) {
 756         info->core_run_state = CORE_RUNNING;
 757         info->vm_info->run_state = VM_RUNNING;
 758     } else {
 759
 760         PrintDebug("VMX core %u: Waiting for core initialization\n", info->cpu_id);
 761
 762         while (info->core_run_state == CORE_STOPPED) {
 763             v3_yield(info);
 764             //PrintDebug("VMX core %u: still waiting for INIT\n",info->cpu_id);
 765         }
 766
 767         PrintDebug("VMX core %u initialized\n", info->cpu_id);
 768     }
 769
 770
 771     PrintDebug("VMX core %u: I am starting at CS=0x%x (base=0x%p, limit=0x%x),  RIP=0x%p\n",
 772                info->cpu_id, info->segments.cs.selector, (void *)(info->segments.cs.base),
 773                info->segments.cs.limit, (void *)(info->rip));
 774
 775
 776     PrintDebug("VMX core %u: Launching VMX VM\n", info->cpu_id);
 777
 778     v3_start_time(info);
 779
 780     while (1) {
 781         if (v3_vmx_enter(info) == -1) {
 782             v3_print_vmcs();
 783             print_exit_log(info);
 784             return -1;
 785         }
 786
 787 /*
 788         if ((info->num_exits % 5000) == 0) {
 789             V3_Print("VMX Exit number %d\n", (uint32_t)info->num_exits);
 790         }
 791 */
 792
 793     }
 794
 795     return 0;
 796 }
 797
 798
 799 int v3_is_vmx_capable() {
 800     v3_msr_t feature_msr;
 801     uint32_t eax = 0, ebx = 0, ecx = 0, edx = 0;
 802
 803     v3_cpuid(0x1, &eax, &ebx, &ecx, &edx);
 804
 805     PrintDebug("ECX: 0x%x\n", ecx);
 806
 807     if (ecx & CPUID_1_ECX_VTXFLAG) {
 808         v3_get_msr(VMX_FEATURE_CONTROL_MSR, &(feature_msr.hi), &(feature_msr.lo));
 809
 810         PrintDebug("MSRREGlow: 0x%.8x\n", feature_msr.lo);
 811
 812         if ((feature_msr.lo & FEATURE_CONTROL_VALID) != FEATURE_CONTROL_VALID) {
 813             PrintDebug("VMX is locked -- enable in the BIOS\n");
 814             return 0;
 815         }
 816
 817     } else {
 818         PrintDebug("VMX not supported on this cpu\n");
 819         return 0;
 820     }
 821
 822     return 1;
 823 }
 824
 825 static int has_vmx_nested_paging() {
 826     return 0;
 827 }
 828
 829
 830
 831 void v3_init_vmx_cpu(int cpu_id) {
 832     extern v3_cpu_arch_t v3_cpu_types[];
 833     struct v3_msr tmp_msr;
 834     uint64_t ret = 0;
 835
 836     v3_get_msr(VMX_CR4_FIXED0_MSR,&(tmp_msr.hi),&(tmp_msr.lo));
 837 #ifdef __V3_64BIT__
 838     __asm__ __volatile__ (
 839                           "movq %%cr4, %%rbx;"
 840                           "orq  $0x00002000, %%rbx;"
 841                           "movq %%rbx, %0;"
 842                           : "=m"(ret)
 843                           :
 844                           : "%rbx"
 845                           );
 846
 847     if ((~ret & tmp_msr.value) == 0) {
 848         __asm__ __volatile__ (
 849                               "movq %0, %%cr4;"
 850                               :
 851                               : "q"(ret)
 852                               );
 853     } else {
 854         PrintError("Invalid CR4 Settings!\n");
 855         return;
 856     }
 857
 858     __asm__ __volatile__ (
 859                           "movq %%cr0, %%rbx; "
 860                           "orq  $0x00000020,%%rbx; "
 861                           "movq %%rbx, %%cr0;"
 862                           :
 863                           :
 864                           : "%rbx"
 865                           );
 866 #elif __V3_32BIT__
 867     __asm__ __volatile__ (
 868                           "movl %%cr4, %%ecx;"
 869                           "orl  $0x00002000, %%ecx;"
 870                           "movl %%ecx, %0;"
 871                           : "=m"(ret)
 872                           :
 873                           : "%ecx"
 874                           );
 875
 876     if ((~ret & tmp_msr.value) == 0) {
 877         __asm__ __volatile__ (
 878                               "movl %0, %%cr4;"
 879                               :
 880                               : "q"(ret)
 881                               );
 882     } else {
 883         PrintError("Invalid CR4 Settings!\n");
 884         return;
 885     }
 886
 887     __asm__ __volatile__ (
 888                           "movl %%cr0, %%ecx; "
 889                           "orl  $0x00000020,%%ecx; "
 890                           "movl %%ecx, %%cr0;"
 891                           :
 892                           :
 893                           : "%ecx"
 894                           );
 895
 896 #endif
 897
 898     //
 899     // Should check and return Error here....
 900
 901
 902     // Setup VMXON Region
 903     host_vmcs_ptrs[cpu_id] = allocate_vmcs();
 904
 905     PrintDebug("VMXON pointer: 0x%p\n", (void *)host_vmcs_ptrs[cpu_id]);
 906
 907     if (v3_enable_vmx(host_vmcs_ptrs[cpu_id]) == VMX_SUCCESS) {
 908         PrintDebug("VMX Enabled\n");
 909     } else {
 910         PrintError("VMX initialization failure\n");
 911         return;
 912     }
 913
 914
 915     if (has_vmx_nested_paging() == 1) {
 916         v3_cpu_types[cpu_id] = V3_VMX_EPT_CPU;
 917     } else {
 918         v3_cpu_types[cpu_id] = V3_VMX_CPU;
 919     }
 920
 921 }
 922