2 * This file is part of the Palacios Virtual Machine Monitor developed
3 * by the V3VEE Project with funding from the United States National
4 * Science Foundation and the Department of Energy.
6 * The V3VEE Project is a joint project between Northwestern University
7 * and the University of New Mexico. You can find out more at
10 * Copyright (c) 2008, Jack Lange <jarusl@cs.northwestern.edu>
11 * Copyright (c) 2008, The V3VEE Project <http://www.v3vee.org>
12 * All rights reserved.
14 * Author: Jack Lange <jarusl@cs.northwestern.edu>
16 * This is free software. You are permitted to use,
17 * redistribute, and modify it as specified in the file "V3VEE_LICENSE".
20 #include <palacios/vmm_config.h>
21 #include <palacios/vmm.h>
22 #include <palacios/vmm_debug.h>
23 #include <palacios/vmm_msr.h>
24 #include <palacios/vmm_decoder.h>
25 #include <palacios/vmm_telemetry.h>
26 #include <palacios/vmm_mem.h>
27 #include <palacios/vmm_hypercall.h>
28 #include <palacios/vmm_dev_mgr.h>
29 #include <palacios/vmm_cpuid.h>
31 #ifdef CONFIG_SYMBIOTIC
32 #include <palacios/vmm_sym_iface.h>
34 #ifdef CONFIG_SYMBIOTIC_SWAP
35 #include <palacios/vmm_sym_swap.h>
40 #include <devices/generic.h>
41 #include <devices/ide.h>
42 #include <devices/ram_cd.h>
43 #include <devices/net_cd.h>
44 #include <devices/ram_hd.h>
45 #include <devices/net_hd.h>
47 #include <devices/telnet_cons.h>
48 #include <devices/pci_passthrough.h>
53 #include <palacios/vmm_host_events.h>
57 #include <palacios/vmm_socket.h>
60 static int setup_memory_map(struct guest_info * info, struct v3_vm_config * config_ptr);
61 static int setup_devices(struct guest_info * info, struct v3_vm_config * config_ptr);
62 static int configure_generic(struct guest_info * info, struct v3_vm_config * config_ptr);
66 #ifdef CONFIG_PASSTHROUGH_VIDEO
67 static int passthrough_mem_write(addr_t guest_addr, void * src, uint_t length, void * priv_data) {
70 // memcpy((void*)guest_addr, src, length);
71 PrintDebug("Write of %d bytes to %p\n", length, (void *)guest_addr);
72 PrintDebug("Write Value = %p\n", (void *)*(addr_t *)src);
78 int v3_pre_config_guest(struct guest_info * info, struct v3_vm_config * config_ptr) {
79 extern v3_cpu_arch_t v3_cpu_types[];
81 // Amount of ram the Guest will have, rounded to a 4K page boundary
82 info->mem_size = config_ptr->mem_size & ~(addr_t)0xfff;
84 info->cpu_id = config_ptr->guest_cpu;
87 * Initialize the subsystem data strutures
89 #ifdef CONFIG_TELEMETRY
90 // This should go first, because other subsystems will depend on the guest_info flag
91 if (config_ptr->enable_telemetry) {
92 info->enable_telemetry = 1;
93 v3_init_telemetry(info);
95 info->enable_telemetry = 0;
99 v3_init_hypercall_map(info);
100 v3_init_io_map(info);
101 v3_init_msr_map(info);
102 v3_init_cpuid_map(info);
103 v3_init_host_events(info);
105 // Initialize the memory map
106 v3_init_shadow_map(info);
108 if ((v3_cpu_types[info->cpu_id] == V3_SVM_REV3_CPU) &&
109 (config_ptr->enable_nested_paging == 1)) {
110 PrintDebug("Guest Page Mode: NESTED_PAGING\n");
111 info->shdw_pg_mode = NESTED_PAGING;
113 PrintDebug("Guest Page Mode: SHADOW_PAGING\n");
114 v3_init_shadow_page_state(info);
115 info->shdw_pg_mode = SHADOW_PAGING;
118 #ifdef CONFIG_SYMBIOTIC
119 v3_init_sym_iface(info);
123 v3_init_interrupt_state(info);
124 v3_init_exception_state(info);
125 v3_init_dev_mgr(info);
126 v3_init_decoder(info);
128 #ifdef CONFIG_SYMBIOTIC_SWAP
129 PrintDebug("initializing symbiotic swap\n");
130 v3_init_sym_swap(info);
134 if (config_ptr->schedule_freq == 0) {
135 // set the schedule frequency to 100 HZ
136 config_ptr->schedule_freq = 100;
139 PrintDebug("CPU_KHZ = %d, schedule_freq=%p\n", V3_CPU_KHZ(), (void *)config_ptr->schedule_freq);
141 info->yield_cycle_period = (V3_CPU_KHZ() * 1000) / config_ptr->schedule_freq;
143 // Initial CPU operating mode
144 info->cpu_mode = REAL;
145 info->mem_mode = PHYSICAL_MEM;
151 int v3_post_config_guest(struct guest_info * info, struct v3_vm_config * config_ptr) {
153 // Configure the memory map for the guest
154 if (setup_memory_map(info, config_ptr) == -1) {
155 PrintError("Setting up guest memory map failed...\n");
159 //v3_hook_io_port(info, 1234, &IO_Read, NULL, info);
161 if (setup_devices(info, config_ptr) == -1) {
162 PrintError("Failed to setup devices\n");
166 // v3_print_io_map(info);
167 v3_print_msr_map(info);
169 info->run_state = VM_STOPPED;
171 info->vm_regs.rdi = 0;
172 info->vm_regs.rsi = 0;
173 info->vm_regs.rbp = 0;
174 info->vm_regs.rsp = 0;
175 info->vm_regs.rbx = 0;
176 info->vm_regs.rdx = 0;
177 info->vm_regs.rcx = 0;
178 info->vm_regs.rax = 0;
188 * The amount of guest memory is stored in info->mem_size
189 * We need to make sure the memory map extends to cover it
191 static int setup_memory_map(struct guest_info * info, struct v3_vm_config * config_ptr) {
193 #ifdef CONFIG_PASSTHROUGH_VIDEO
194 PrintDebug("Setting up memory map (memory size=%dMB)\n", (uint_t)(info->mem_size / (1024 * 1024)));
198 if (v3_add_shadow_mem(info, 0xa0000, 0xc0000, 0xa0000) == -1) {
199 PrintError("Could not map VGA framebuffer\n");
203 v3_hook_write_mem(info, 0xa0000, 0xc0000, 0xa0000, passthrough_mem_write, NULL);
207 #define VGABIOS_START 0x000c0000
208 #define ROMBIOS_START 0x000f0000
212 extern uint8_t v3_vgabios_start[];
213 extern uint8_t v3_vgabios_end[];
215 addr_t vgabios_dst = v3_get_shadow_addr(&(info->mem_map.base_region), VGABIOS_START);
216 memcpy(V3_VAddr((void *)vgabios_dst), v3_vgabios_start, v3_vgabios_end - v3_vgabios_start);
221 extern uint8_t v3_rombios_start[];
222 extern uint8_t v3_rombios_end[];
224 addr_t rombios_dst = v3_get_shadow_addr(&(info->mem_map.base_region), ROMBIOS_START);
225 memcpy(V3_VAddr((void *)rombios_dst), v3_rombios_start, v3_rombios_end - v3_rombios_start);
228 #ifdef CONFIG_CRAY_XT
230 #define SEASTAR_START 0xffe00000
231 #define SEASTAR_END 0xffffffff
232 // Map the Seastar straight through
233 if (v3_add_shadow_mem(info, SEASTAR_START, SEASTAR_END, SEASTAR_START) == -1) {
234 PrintError("Could not map through the seastar\n");
240 v3_print_mem_map(info);
247 static int setup_devices(struct guest_info * info, struct v3_vm_config * config_ptr) {
249 v3_create_device(info, "8259A", NULL);
250 v3_create_device(info, "KEYBOARD", NULL);
251 v3_create_device(info, "8254_PIT", NULL);
252 v3_create_device(info, "BOCHS_DEBUG", NULL);
253 v3_create_device(info, "OS_DEBUG", NULL);
254 v3_create_device(info, "LAPIC", NULL);
255 v3_create_device(info, "IOAPIC", "LAPIC");
256 v3_create_device(info, "VMNET", NULL);
259 v3_create_device(info, "CGA_VIDEO", (void *)1);
261 struct telnet_cons_cfg cons_cfg = {"CGA_VIDEO", 19997};
262 v3_create_device(info, "TELNET_CONSOLE", &cons_cfg);
265 if (config_ptr->enable_pci == 1) {
266 struct ide_cfg ide_config = {"PCI", "PIIX3"};
267 struct pci_passthrough_cfg pci_qemu_pt_cfg = {"PCI", "E1000", 0x8086, 0x100e};
268 struct pci_passthrough_cfg pci_hw_pt_cfg = {"PCI", "E1000", 0x8086, 0x107c};
270 v3_create_device(info, "PCI", NULL);
271 v3_create_device(info, "i440FX", "PCI");
272 v3_create_device(info, "PIIX3", "PCI");
275 v3_create_device(info, "LNX_VIRTIO_SYM", "PCI");
276 v3_create_device(info, "LNX_VIRTIO_BLK", "PCI");
277 v3_create_device(info, "LNX_VIRTIO_BALLOON", "PCI");
278 v3_create_device(info, "SYM_SWAP", "LNX_VIRTIO_BLK");
280 v3_create_device(info, "IDE", &ide_config);
282 v3_create_device(info, "PCI_PASSTHROUGH", &pci_qemu_pt_cfg);
283 v3_create_device(info, "PCI_PASSTHROUGH", &pci_hw_pt_cfg);
287 v3_create_device(info, "IDE", NULL);
291 if (config_ptr->pri_disk_type != NONE) {
292 if (config_ptr->pri_disk_type == CDROM) {
293 if (config_ptr->pri_disk_con == RAM) {
294 struct ram_cd_cfg cfg = {"IDE", 0, 0,
295 (addr_t)(config_ptr->pri_disk_info.ram.data_ptr),
296 config_ptr->pri_disk_info.ram.size};
298 PrintDebug("Creating RAM CD\n");
300 v3_create_device(info, "RAM-CD", &cfg);
301 } else if (config_ptr->pri_disk_con == NETWORK) {
302 struct net_cd_cfg cfg = {"IDE", 0, 0,
303 config_ptr->pri_disk_info.net.ip_str,
304 config_ptr->pri_disk_info.net.port,
305 config_ptr->pri_disk_info.net.disk_name};
306 PrintDebug("Creating NET CD\n");
308 v3_create_device(info, "NET-CD", &cfg);
310 } else if (config_ptr->pri_disk_type == HARDDRIVE) {
311 if (config_ptr->pri_disk_con == RAM) {
312 struct ram_hd_cfg cfg = {"IDE", 0, 0,
313 (addr_t)(config_ptr->pri_disk_info.ram.data_ptr),
314 config_ptr->pri_disk_info.ram.size};
316 PrintDebug("Creating RAM HD\n");
318 v3_create_device(info, "RAM-HD", &cfg);
319 } else if (config_ptr->pri_disk_con == NETWORK) {
320 struct net_hd_cfg cfg = {"IDE", 0, 0,
321 config_ptr->pri_disk_info.net.ip_str,
322 config_ptr->pri_disk_info.net.port,
323 config_ptr->pri_disk_info.net.disk_name};
324 PrintDebug("Creating NET HD\n");
325 v3_create_device(info, "NET-HD", &cfg);
332 if (config_ptr->sec_disk_type != NONE) {
333 if (config_ptr->sec_disk_type == CDROM) {
334 if (config_ptr->sec_disk_con == RAM) {
335 struct ram_cd_cfg cfg = {"IDE", 0, 1,
336 (addr_t)(config_ptr->sec_disk_info.ram.data_ptr),
337 config_ptr->sec_disk_info.ram.size};
339 PrintDebug("Creating RAM CD\n");
340 v3_create_device(info, "RAM-CD", &cfg);
341 } else if (config_ptr->sec_disk_con == NETWORK) {
342 struct net_cd_cfg cfg = {"IDE", 0, 1,
343 config_ptr->sec_disk_info.net.ip_str,
344 config_ptr->sec_disk_info.net.port,
345 config_ptr->sec_disk_info.net.disk_name};
347 PrintDebug("Creating NET CD\n");
348 v3_create_device(info, "NET-CD", &cfg);
350 } else if (config_ptr->sec_disk_type == HARDDRIVE) {
351 if (config_ptr->sec_disk_con == RAM) {
352 struct ram_hd_cfg cfg = {"IDE", 0, 1,
353 (addr_t)(config_ptr->sec_disk_info.ram.data_ptr),
354 config_ptr->sec_disk_info.ram.size};
355 PrintDebug("Creating RAM HD\n");
356 v3_create_device(info, "RAM-HD", &cfg);
357 } else if (config_ptr->sec_disk_con == NETWORK) {
358 struct net_hd_cfg cfg = {"IDE", 0, 1,
359 config_ptr->sec_disk_info.net.ip_str,
360 config_ptr->sec_disk_info.net.port,
361 config_ptr->sec_disk_info.net.disk_name};
362 PrintDebug("Creating NET HD\n");
363 v3_create_device(info, "NET-HD", &cfg);
370 #ifdef CONFIG_GENERIC
371 configure_generic(info, config_ptr);
374 // This should go last because it requires information about the Harddrives
375 v3_create_device(info, "NVRAM", "IDE");
377 PrintDebugDevMgr(info);
384 #ifdef CONFIG_GENERIC
385 static int configure_generic(struct guest_info * info, struct v3_vm_config * config_ptr) {
386 PrintDebug("Creating Generic Device\n");
387 v3_create_device(info, "GENERIC", NULL);
390 struct vm_device * generic = v3_find_dev(info, "GENERIC");
393 PrintError("Could not find generic device\n");
397 // port 0x92: A20 enable/disable (bit 2) (This causes an MMU flush)
400 // Make the DMA controller invisible
401 v3_generic_add_port_range(generic, 0x00, 0x07, GENERIC_PRINT_AND_IGNORE); // DMA 1 channels 0,1,2,3 (address, counter)
402 v3_generic_add_port_range(generic, 0xc0, 0xc7, GENERIC_PRINT_AND_IGNORE); // DMA 2 channels 4,5,6,7 (address, counter)
403 v3_generic_add_port_range(generic, 0x87, 0x87, GENERIC_PRINT_AND_IGNORE); // DMA 1 channel 0 page register
404 v3_generic_add_port_range(generic, 0x83, 0x83, GENERIC_PRINT_AND_IGNORE); // DMA 1 channel 1 page register
405 v3_generic_add_port_range(generic, 0x81, 0x81, GENERIC_PRINT_AND_IGNORE); // DMA 1 channel 2 page register
406 v3_generic_add_port_range(generic, 0x82, 0x82, GENERIC_PRINT_AND_IGNORE); // DMA 1 channel 3 page register
407 v3_generic_add_port_range(generic, 0x8f, 0x8f, GENERIC_PRINT_AND_IGNORE); // DMA 2 channel 4 page register
408 v3_generic_add_port_range(generic, 0x8b, 0x8b, GENERIC_PRINT_AND_IGNORE); // DMA 2 channel 5 page register
409 v3_generic_add_port_range(generic, 0x89, 0x89, GENERIC_PRINT_AND_IGNORE); // DMA 2 channel 6 page register
410 v3_generic_add_port_range(generic, 0x8a, 0x8a, GENERIC_PRINT_AND_IGNORE); // DMA 2 channel 7 page register
411 v3_generic_add_port_range(generic, 0x08, 0x0f, GENERIC_PRINT_AND_IGNORE); // DMA 1 misc registers (csr, req, smask,mode,clearff,reset,enable,mmask)
412 v3_generic_add_port_range(generic, 0xd0, 0xde, GENERIC_PRINT_AND_IGNORE); // DMA 2 misc registers
417 // Make the Serial ports invisible
419 v3_generic_add_port_range(generic, 0x3f8, 0x3f8+7, GENERIC_PRINT_AND_IGNORE); // COM 1
420 v3_generic_add_port_range(generic, 0x2f8, 0x2f8+7, GENERIC_PRINT_AND_IGNORE); // COM 2
425 v3_generic_add_port_range(generic, 0x3e8, 0x3e8+7, GENERIC_PRINT_AND_IGNORE); // COM 3
426 v3_generic_add_port_range(generic, 0x2e8, 0x2e8+7, GENERIC_PRINT_AND_IGNORE); // COM 4
431 // Make the PCI bus invisible (at least it's configuration)
433 //v3_generic_add_port_range(generic, 0xcf8, 0xcf8, GENERIC_PRINT_AND_IGNORE); // PCI Config Address
434 //v3_generic_add_port_range(generic, 0xcfc, 0xcfc, GENERIC_PRINT_AND_IGNORE); // PCI Config Data
440 // Monitor the IDE controllers (very slow)
441 v3_generic_add_port_range(generic, 0x170, 0x178, GENERIC_PRINT_AND_PASSTHROUGH); // IDE 1
442 v3_generic_add_port_range(generic, 0x376, 0x377, GENERIC_PRINT_AND_PASSTHROUGH); // IDE 1
446 v3_generic_add_port_range(generic, 0x1f0, 0x1f8, GENERIC_PRINT_AND_PASSTHROUGH); // IDE 0
447 v3_generic_add_port_range(generic, 0x3f6, 0x3f7, GENERIC_PRINT_AND_PASSTHROUGH); // IDE 0
453 // Make the floppy controllers invisible
455 v3_generic_add_port_range(generic, 0x3f0, 0x3f2, GENERIC_PRINT_AND_IGNORE); // Primary floppy controller (base,statusa/statusb,DOR)
456 v3_generic_add_port_range(generic, 0x3f4, 0x3f5, GENERIC_PRINT_AND_IGNORE); // Primary floppy controller (mainstat/datarate,data)
457 v3_generic_add_port_range(generic, 0x3f7, 0x3f7, GENERIC_PRINT_AND_IGNORE); // Primary floppy controller (DIR)
458 v3_generic_add_port_range(generic, 0x370, 0x372, GENERIC_PRINT_AND_IGNORE); // Secondary floppy controller (base,statusa/statusb,DOR)
459 v3_generic_add_port_range(generic, 0x374, 0x375, GENERIC_PRINT_AND_IGNORE); // Secondary floppy controller (mainstat/datarate,data)
460 v3_generic_add_port_range(generic, 0x377, 0x377, GENERIC_PRINT_AND_IGNORE); // Secondary floppy controller (DIR)
466 // Make the parallel port invisible
468 v3_generic_add_port_range(generic, 0x378, 0x37f, GENERIC_PRINT_AND_IGNORE);
472 #ifdef CONFIG_PASTHROUGH_VIDEO
474 // Monitor graphics card operations
476 v3_generic_add_port_range(generic, 0x3b0, 0x3bb, GENERIC_PRINT_AND_PASSTHROUGH);
477 v3_generic_add_port_range(generic, 0x3c0, 0x3df, GENERIC_PRINT_AND_PASSTHROUGH);
483 // Make the ISA PNP features invisible
485 v3_generic_add_port_range(generic, 0x274, 0x277, GENERIC_PRINT_AND_IGNORE);
486 v3_generic_add_port_range(generic, 0x279, 0x279, GENERIC_PRINT_AND_IGNORE);
487 v3_generic_add_port_range(generic, 0xa79, 0xa79, GENERIC_PRINT_AND_IGNORE);
492 // Monitor any network card (realtek ne2000) operations
493 v3_generic_add_port_range(generic, 0xc100, 0xc1ff, GENERIC_PRINT_AND_PASSTHROUGH);
496 // v3_generic_add_port_range(generic, 0x378, 0x400, GENERIC_PRINT_AND_IGNORE);