2 * This file is part of the Palacios Virtual Machine Monitor developed
3 * by the V3VEE Project with funding from the United States National
4 * Science Foundation and the Department of Energy.
6 * The V3VEE Project is a joint project between Northwestern University
7 * and the University of New Mexico. You can find out more at
10 * Copyright (c) 2008, Peter Dinda <pdinda@northwestern.edu>
11 * Copyright (c) 2008, The V3VEE Project <http://www.v3vee.org>
12 * All rights reserved.
14 * Author: Peter Dinda <pdinda@northwestern.edu>
16 * This is free software. You are permitted to use,
17 * redistribute, and modify it as specified in the file "V3VEE_LICENSE".
20 #include <palacios/vmm.h>
21 #include <palacios/vmm_dev_mgr.h>
22 #include <palacios/vmm_types.h>
24 #include <palacios/vmm_ringbuffer.h>
25 #include <palacios/vmm_lock.h>
26 #include <palacios/vmm_intr.h>
27 #include <palacios/vmm_host_events.h>
28 #include <palacios/vm_guest.h>
31 #ifndef CONFIG_DEBUG_KEYBOARD
33 #define PrintDebug(fmt, args...)
36 #define KEYBOARD_DEBUG_80H 0
40 #define KEYBOARD_60H 0x60 // keyboard microcontroller
41 #define KEYBOARD_64H 0x64 // onboard microcontroller
43 #define KEYBOARD_DELAY_80H 0x80 // written for timing
45 #define KEYBOARD_IRQ 0x1
50 // bits for the output port
51 #define OUTPUT_RESET 0x01 // System reset on 0
52 #define OUTPUT_A20 0x02 // A20 gate (1= A20 is gated)
53 #define OUTPUT_RES1 0x04 // reserved
54 #define OUTPUT_RES2 0x08 // reserved
55 #define OUTPUT_OUTPUT_FULL 0x10 // output buffer full
56 #define OUTPUT_INPUT_EMPTY 0x20 // input buffer empty
57 #define OUTPUT_KBD_CLOCK 0x40 // keyboard clock (?)
58 #define OUTPUT_KBD_DATA 0x80 // keyboard data
60 // bits for the input port
62 #define INPUT_RES0 0x01 // reserved
63 #define INPUT_RES1 0x02 // reserved
64 #define INPUT_RES2 0x04 // reserved
65 #define INPUT_RES3 0x08 // reserved
66 #define INPUT_RAM 0x10 // set to 1 if RAM exists?
67 #define INPUT_JUMPER 0x20 // manufacturing jumper?
68 #define INPUT_DISPLAY 0x40 // 0=color, 1=mono
69 #define INPUT_KBD_INHIBIT 0x80 // 1=inhibit keyboard ?
72 #define MOUSE_ACK 0xfa
74 // for queue operations
78 // for queue operations - whether it's data or cmd waiting on 60h
82 // for queue operations - whether this is keyboard or mouse data on 60h
92 uint8_t irq_en : 1; // 1=interrupts enabled
93 uint8_t mouse_irq_en : 1; // 1=interrupts enabled for mouse
94 uint8_t self_test_ok : 1; // 1= self test passed
95 uint8_t override : 1; // MBZ for PS2
96 uint8_t disable : 1; // 1=disabled keyboard
97 uint8_t mouse_disable : 1; // 1=disabled mouse
98 uint8_t translate : 1; // 1=translate to set 1 scancodes (For PC Compatibility)
99 uint8_t rsvd : 1; // must be zero
100 } __attribute__((packed));
101 } __attribute__((packed));
102 } __attribute__((packed));
111 uint8_t out_buf_full : 1; // 1=full (data for system)
112 uint8_t in_buf_full : 1; // 1=full (data for 8042)
113 uint8_t self_test_ok : 1; // 1=self-test-passed
114 uint8_t cmd : 1; // 0=data on 60h, 1=cmd on 64h
115 uint8_t enabled : 1; // 1=keyboard is enabled
116 uint8_t mouse_buf_full : 1; // 1= mouse output buffer full
117 uint8_t timeout_err : 1; // 1=timeout of keybd
118 uint8_t parity_err : 1; // 1=parity error
119 } __attribute__((packed));
120 } __attribute__((packed));
121 } __attribute__((packed));
128 /* This QUEUE_SIZE must be 256 */
129 /* Its designed this way to cause the start/end index to automatically
130 wrap around (2^8 = 256) so an overrun will automatically readjust the
133 #define QUEUE_SIZE 256
135 uint8_t queue[QUEUE_SIZE];
142 struct keyboard_internal {
144 // 0x60 is the port for the keyboard microcontroller
145 // writes are commands
146 // reads from it usually return scancodes
147 // however, it can also return other data
148 // depending on the state of the onboard microcontroller
150 // 0x64 is the port for the onboard microcontroller
151 // writes are commands
155 // state of the onboard microcontroller
156 // this is needed because sometimes 0x60 reads come
157 // from the onboard microcontroller
158 enum {// Normal mode measn we deliver keys
159 // to the vm and accept commands from it
161 // after receiving cmd 0x60
162 // keybaord uC cmd will subsequently arrive
164 // after recieving 0xa5
165 // password arrives on data port, null terminated
167 // after having a d1 sent to 64
168 // we wait for a new output byte on 60
170 // after having a d2 sent to 64
171 // we wait for a new output byte on 60
172 // then make it available as a keystroke
174 // after having a d3 sent to 64
175 // we wait for a new output byte on 60
176 // then make it available as a mouse event
178 // after having a d4 sent to 64
179 // we wait for a new output byte on 60
180 // then send it to the mouse
182 // After the Keyboard LEDs are enabled
183 // we wait for the output byte on 64?
185 // After the Keyboard SET_RATE is called
186 // we wait for the output byte on 64?
192 // Normal mouse state
194 // this is used for setting sample rate
203 struct status_reg status;
205 uint8_t output_byte; // output port of onboard uC (e.g. A20)
206 uint8_t input_byte; // input port of onboard uC
213 struct queue kbd_queue;
214 struct queue mouse_queue;
220 static int update_kb_irq(struct vm_device * dev) {
221 struct keyboard_internal *state = (struct keyboard_internal *)(dev->private_data);
225 state->status.out_buf_full = 0;
226 state->status.mouse_buf_full = 0;
229 // If there is pending Keyboard data then it overrides mouse data
230 if (state->kbd_queue.count > 0) {
231 irq_num = KEYBOARD_IRQ;
232 } else if (state->mouse_queue.count > 0) {
234 state->status.mouse_buf_full = 1;
237 PrintDebug("keyboard: interrupt 0x%d\n", irq_num);
240 // Global output buffer flag (for both Keyboard and mouse)
241 state->status.out_buf_full = 1;
243 if (state->cmd.irq_en == 1) {
244 v3_raise_irq(dev->vm, irq_num);
253 /* Only one byte is read per irq
254 * So if the queue is still full after a data read, we re-raise the irq
255 * If we keep reading an empty queue we return the last queue entry
258 static int push_to_output_queue(struct vm_device * dev, uint8_t value, uint8_t cmd, uint8_t mouse) {
259 struct keyboard_internal * state = (struct keyboard_internal *)(dev->private_data);
260 struct queue * q = NULL;
264 q = &(state->mouse_queue);
266 q = &(state->kbd_queue);
269 if (q->count == QUEUE_SIZE) {
274 state->status.cmd = 1;
276 state->status.cmd = 0;
279 q->queue[q->end++] = value;
290 static int pull_from_output_queue(struct vm_device * dev, uint8_t * value) {
291 struct keyboard_internal * state = (struct keyboard_internal *)(dev->private_data);
292 struct queue * q = NULL;
294 if (state->kbd_queue.count > 0) {
295 q = &(state->kbd_queue);
296 PrintDebug("Reading from Keyboard Queue\n");
297 } else if (state->mouse_queue.count > 0) {
298 q = &(state->mouse_queue);
299 PrintDebug("Reading from Mouse Queue\n");
301 uint8_t idx = state->kbd_queue.start - 1;
302 PrintDebug("No Data in any queue\n");
303 *value = state->kbd_queue.queue[idx];
307 *value = q->queue[q->start++];
311 PrintDebug("Read from Queue: %x\n", *value);
312 PrintDebug("QStart=%d, QEnd=%d\n", q->start, q->end);
322 static int key_event_handler(struct guest_info * info,
323 struct v3_keyboard_event * evt,
324 void * private_data) {
325 struct vm_device * dev = (struct vm_device *)private_data;
326 struct keyboard_internal *state = (struct keyboard_internal *)(dev->private_data);
328 PrintDebug("keyboard: injected status 0x%x, and scancode 0x%x\n", evt->status, evt->scan_code);
330 if (evt->scan_code == 0x44) { // F10 debug dump
331 v3_print_guest_state(info);
332 // PrintGuestPageTables(info, info->shdw_pg_state.guest_cr3);
334 #ifdef CONFIG_SYMBIOTIC
335 else if (evt->scan_code == 0x43) { // F9 Sym test
336 PrintDebug("Testing sym call\n");
337 sym_arg_t a0 = 0x1111;
338 sym_arg_t a1 = 0x2222;
339 sym_arg_t a2 = 0x3333;
340 sym_arg_t a3 = 0x4444;
341 sym_arg_t a4 = 0x5555;
343 v3_sym_call5(info, SYMCALL_TEST, &a0, &a1, &a2, &a3, &a4);
345 V3_Print("Symcall Test Returned arg0=%x, arg1=%x, arg2=%x, arg3=%x, arg4=%x\n",
346 (uint32_t)a0, (uint32_t)a1, (uint32_t)a2, (uint32_t)a3, (uint32_t)a4);
350 else if (evt->scan_code == 0x42) { // F8 Sym test2
351 extern int v3_dbg_enable;
353 PrintDebug("Toggling Debugging\n");
359 addr_t irq_state = v3_lock_irqsave(state->kb_lock);
361 if ( (state->status.enabled == 1) // onboard is enabled
362 && (state->cmd.disable == 0) ) { // keyboard is enabled
364 push_to_output_queue(dev, evt->scan_code, DATA, KEYBOARD);
367 v3_unlock_irqrestore(state->kb_lock, irq_state);
373 static int mouse_event_handler(struct guest_info * info,
374 struct v3_mouse_event * evt,
375 void * private_data) {
376 struct vm_device * dev = (struct vm_device *)private_data;
377 struct keyboard_internal * state = (struct keyboard_internal *)(dev->private_data);
380 PrintDebug("keyboard: injected mouse packet 0x %x %x %x\n",
381 evt->data[0], evt->data[1], evt->data[2]);
383 addr_t irq_state = v3_lock_irqsave(state->kb_lock);
385 switch (state->mouse_state) {
388 if (state->cmd.mouse_disable == 0) {
389 push_to_output_queue(dev, evt->data[0], DATA, MOUSE);
390 push_to_output_queue(dev, evt->data[1], DATA, MOUSE);
391 push_to_output_queue(dev, evt->data[2], DATA, MOUSE);
395 PrintError("Invalid mouse state\n");
401 v3_unlock_irqrestore(state->kb_lock, irq_state);
407 static int keyboard_reset_device(struct vm_device * dev) {
408 struct keyboard_internal * data = (struct keyboard_internal *)(dev->private_data);
410 memset(data, 0, sizeof(struct keyboard_internal));
412 data->state = NORMAL;
413 data->mouse_state = STREAM;
416 // PS2, keyboard+mouse enabled, generic translation
419 data->cmd.irq_en = 1;
420 data->cmd.mouse_irq_en = 1;
421 data->cmd.self_test_ok = 1;
425 // buffers empty, no errors
426 data->status.val = 0;
428 data->status.self_test_ok = 1; // self-tests passed
429 data->status.enabled = 1;// keyboard ready
433 data->output_byte = 0; // ?
435 data->input_byte = INPUT_RAM; // we have some
436 // also display=color, jumper 0, keyboard enabled
438 PrintDebug("keyboard: reset device\n");
446 static int keyboard_start_device(struct vm_device * dev) {
447 PrintDebug("keyboard: start device\n");
452 static int keyboard_stop_device(struct vm_device * dev) {
453 PrintDebug("keyboard: stop device\n");
459 static int mouse_write_output(struct vm_device * dev, uint8_t data) {
460 struct keyboard_internal * state = (struct keyboard_internal *)(dev->private_data);
462 switch (state->mouse_state) {
467 if (state->mouse_enabled == 0) {
468 push_to_output_queue(dev, 0xfe, DATA, MOUSE) ; // no mouse!
470 push_to_output_queue(dev, MOUSE_ACK, DATA, MOUSE) ;
471 push_to_output_queue(dev, 0xaa, DATA, MOUSE) ;
472 push_to_output_queue(dev, 0x00, DATA, MOUSE) ;
476 /* case 0xfe: //resend */
477 /* PushToOutputQueue(dev, 0xfa, OVERWRITE, DATA, MOUSE) ; */
478 /* PrintDebug(" mouse resend begins "); */
479 /* state->mouse_done_after_ack = 0; */
480 /* state->mouse_needs_ack = 0; */
481 /* state->mouse_state = STREAM1; */
482 /* return 0; // not done */
485 case 0xf6: // set defaults
486 push_to_output_queue(dev, MOUSE_ACK, DATA, MOUSE) ;
487 PrintDebug(" mouse set defaults ");
491 case 0xf5: // disable data reporting
492 push_to_output_queue(dev, MOUSE_ACK, DATA, MOUSE) ;
493 PrintDebug(" mouse disable data reporting ");
496 case 0xf4: // enable data reporting
497 push_to_output_queue(dev, MOUSE_ACK, DATA, MOUSE) ;
498 PrintDebug(" mouse enable data reporting ");
501 case 0xf3: // set sample rate
502 push_to_output_queue(dev, MOUSE_ACK, DATA, MOUSE) ;
503 state->mouse_state = SAMPLE;
504 PrintDebug(" mouse set sample rate begins ");
507 case 0xf2: // get device id
508 push_to_output_queue(dev, MOUSE_ACK, DATA, MOUSE) ;
509 push_to_output_queue(dev, 0x0, DATA, MOUSE);
510 PrintDebug(" mouse get device id begins ");
513 case 0xf0: // set remote mode
514 push_to_output_queue(dev, MOUSE_ACK, DATA, MOUSE) ;
515 PrintDebug(" mouse set remote mode ");
518 case 0xee: // set wrap mode
519 push_to_output_queue(dev, MOUSE_ACK, DATA, MOUSE) ;
520 PrintError(" mouse set wrap mode (ignored) ");
523 case 0xec: // reset wrap mode
524 push_to_output_queue(dev, MOUSE_ACK, DATA, MOUSE) ;
525 PrintError(" mouse reset wrap mode (ignored) ");
528 case 0xeb: // read data
529 push_to_output_queue(dev, MOUSE_ACK, DATA, MOUSE) ;
530 PrintError(" mouse switch to wrap mode (ignored) ");
533 case 0xea: // set stream mode
534 push_to_output_queue(dev, MOUSE_ACK, DATA, MOUSE) ;
535 PrintDebug(" mouse set stream mode ");
538 case 0xe9: // status request
539 push_to_output_queue(dev, MOUSE_ACK, DATA, MOUSE) ;
540 push_to_output_queue(dev, 0x00, DATA, MOUSE);
541 push_to_output_queue(dev, 0x00, DATA, MOUSE);
542 push_to_output_queue(dev, 0x00, DATA, MOUSE);
543 PrintDebug(" mouse status request begins ");
546 case 0xe8: // set resolution
547 push_to_output_queue(dev, MOUSE_ACK, DATA, MOUSE) ;
548 PrintDebug(" mouse set resolution begins ");
549 state->mouse_state = SET_RES;
552 case 0xe7: // set scaling 2:1
553 push_to_output_queue(dev, MOUSE_ACK, DATA, MOUSE) ;
554 PrintDebug(" mouse set scaling 2:1 ");
557 case 0xe6: // set scaling 1:1
558 push_to_output_queue(dev, MOUSE_ACK, DATA, MOUSE) ;
559 PrintDebug(" mouse set scaling 1:1 ");
563 PrintDebug(" receiving unknown mouse command (0x%x) in acceptable state ", data);
571 PrintDebug(" receiving mouse output in unhandled state (0x%x) ", state->mouse_state);
580 #if KEYBOARD_DEBUG_80H
581 static int keyboard_write_delay(ushort_t port, void * src, uint_t length, struct vm_device * dev) {
584 PrintDebug("keyboard: write of 0x%x to 80h\n", *((uint8_t*)src));
587 PrintDebug("keyboard: write of >1 byte to 80h\n", *((uint8_t*)src));
592 static int keyboard_read_delay(ushort_t port, void * dest, uint_t length, struct vm_device * dev) {
595 *(uint8_t *)dest = v3_inb(port);
597 PrintDebug("keyboard: read of 0x%x from 80h\n", *((uint8_t*)dest));
601 PrintDebug("keyboard: read of >1 byte from 80h\n");
612 static int keyboard_write_command(ushort_t port, void * src, uint_t length, struct vm_device * dev) {
613 struct keyboard_internal * state = (struct keyboard_internal *)(dev->private_data);
614 uint8_t cmd = *(uint8_t *)src;
616 // Should always be single byte write
618 PrintError("keyboard: write of >1 bytes (%d) to 64h\n", length);
623 addr_t irq_state = v3_lock_irqsave(state->kb_lock);
625 if (state->state != NORMAL) {
626 PrintDebug("keyboard: warning - receiving command on 64h but state != NORMAL\n");
629 PrintDebug("keyboard: command 0x%x on 64h\n", cmd);
632 case 0x20: // READ COMMAND BYTE (returned in 60h)
633 push_to_output_queue(dev, state->cmd.val, COMMAND, KEYBOARD);
634 PrintDebug("keyboard: command byte 0x%x returned\n", state->cmd.val);
637 case 0x60: // WRITE COMMAND BYTE (read from 60h)
638 state->state = WRITING_CMD_BYTE; // we need to make sure we send the next 0x60 byte appropriately
639 PrintDebug("keyboard: prepare to write command byte\n");
642 // case 0x90-9f - write to output port (?)
644 case 0xa1: // Get version number
645 push_to_output_queue(dev, 0x00, COMMAND, KEYBOARD);
646 PrintDebug("keyboard: version number 0x0 returned\n");
649 case 0xa4: // is password installed? send result to 0x60
650 // we don't support passwords
651 push_to_output_queue(dev, 0xf1, COMMAND, KEYBOARD);
652 PrintDebug("keyboard: password not installed\n");
655 case 0xa5: // new password will arrive on 0x60
656 state->state = TRANSMIT_PASSWD;
657 PrintDebug("keyboard: pepare to transmit password\n");
660 case 0xa6: // check passwd;
661 // since we do not support passwords, we will simply ignore this
662 // the implication is that any password check immediately succeeds
663 // with a blank password
664 PrintDebug("keyboard: password check succeeded\n");
667 case 0xa7: // disable mouse
668 state->cmd.mouse_disable = 1;
669 PrintDebug("keyboard: mouse disabled\n");
672 case 0xa8: // enable mouse
673 state->cmd.mouse_disable = 0;
674 PrintDebug("keyboard: mouse enabled\n");
677 case 0xa9: // mouse interface test (always succeeds)
678 push_to_output_queue(dev, 0x00, COMMAND, KEYBOARD);
679 PrintDebug("keyboard: mouse interface test succeeded\n");
682 case 0xaa: // controller self test (always succeeds)
683 push_to_output_queue(dev, 0x55, COMMAND, KEYBOARD);
684 PrintDebug("keyboard: controller self test succeeded\n");
687 case 0xab: // keyboard interface test (always succeeds)
688 push_to_output_queue(dev, 0, COMMAND, KEYBOARD);
689 PrintDebug("keyboard: keyboard interface test succeeded\n");
692 case 0xad: // disable keyboard
693 state->cmd.disable = 1;
694 PrintDebug("keyboard: keyboard disabled\n");
697 case 0xae: // enable keyboard
698 state->cmd.disable = 0;
699 PrintDebug("keyboard: keyboard enabled\n");
702 case 0xaf: // get version
703 push_to_output_queue(dev, 0x00, COMMAND, KEYBOARD);
704 PrintDebug("keyboard: version 0 returned \n");
707 case 0xd0: // return microcontroller output on 60h
708 push_to_output_queue(dev, state->output_byte, COMMAND, KEYBOARD);
709 PrintDebug("keyboard: output byte 0x%x returned\n", state->output_byte);
712 case 0xd1: // request to write next byte on 60h to the microcontroller output port
713 state->state = WRITING_OUTPUT_PORT;
714 PrintDebug("keyboard: prepare to write output byte\n");
717 case 0xd2: // write keyboard buffer (inject key)
718 state->state = INJECTING_KEY;
719 PrintDebug("keyboard: prepare to inject key\n");
722 case 0xd3: // write mouse buffer (inject mouse)
723 state->state = INJECTING_MOUSE;
724 PrintDebug("keyboard: prepare to inject mouse\n");
727 case 0xd4: // write mouse device (command to mouse?)
728 state->state = IN_MOUSE;
729 PrintDebug("keyboard: prepare to inject mouse command\n");
732 case 0xc0: // read input port
733 push_to_output_queue(dev, state->input_byte, COMMAND, KEYBOARD);
734 PrintDebug("keyboard: input byte 0x%x returned\n", state->input_byte);
737 case 0xc1: //copy input port lsn to status msn
738 state->status.val &= 0x0f;
739 state->status.val |= (state->input_byte & 0xf) << 4;
740 PrintDebug("keyboard: copied input byte low 4 bits to status reg hi 4 bits\n");
743 case 0xc2: // copy input port msn to status msn
744 state->status.val &= 0x0f;
745 state->status.val |= (state->input_byte & 0xf0);
746 PrintDebug("keyboard: copied input byte hi 4 bits to status reg hi 4 bits\n");
749 case 0xe0: // read test port
750 push_to_output_queue(dev, state->output_byte >> 6, COMMAND, KEYBOARD);
751 PrintDebug("keyboard: read 0x%x from test port\n", state->output_byte >> 6);
755 case 0xf0: // pulse output port
756 case 0xf1: // this should pulse 0..3 of cmd_byte on output port
757 case 0xf2: // instead of what is currently in output_byte (I think)
758 case 0xf3: // main effect is taht if bit zero is zero
759 case 0xf4: // should cause reset
760 case 0xf5: // I doubt anything more recent than a 286 running
761 case 0xf6: // OS2 with the penalty box will care
771 PrintDebug("keyboard: ignoring pulse of 0x%x (low=pulsed) on output port\n", (cmd & 0xf));
774 // case ac diagonstic - returns 16 bytes from keyboard microcontroler on 60h
776 PrintDebug("keyboard: ignoring command (unimplemented)\n");
780 v3_unlock_irqrestore(state->kb_lock, irq_state);
785 static int keyboard_read_status(ushort_t port, void * dest, uint_t length, struct vm_device * dev) {
786 struct keyboard_internal *state = (struct keyboard_internal *)(dev->private_data);
789 PrintError("keyboard: >1 byte read for status (64h)\n");
793 PrintDebug("keyboard: read status (64h): ");
795 addr_t irq_state = v3_lock_irqsave(state->kb_lock);
797 *(uint8_t *)dest = state->status.val;
799 v3_unlock_irqrestore(state->kb_lock, irq_state);
801 PrintDebug("0x%x\n", *(uint8_t *)dest);
806 static int keyboard_write_output(ushort_t port, void * src, uint_t length, struct vm_device * dev) {
807 struct keyboard_internal *state = (struct keyboard_internal *)(dev->private_data);
811 PrintError("keyboard: write of 60h with >1 byte\n");
815 uint8_t data = *(uint8_t *)src;
817 PrintDebug("keyboard: output 0x%x on 60h\n", data);
819 addr_t irq_state = v3_lock_irqsave(state->kb_lock);
821 switch (state->state) {
822 case WRITING_CMD_BYTE:
823 state->cmd.val = data;
824 state->state = NORMAL;
825 PrintDebug("keyboard: wrote new command byte 0x%x\n", state->cmd.val);
828 case WRITING_OUTPUT_PORT:
829 state->output_byte = data;
830 state->state = NORMAL;
831 PrintDebug("keyboard: wrote new output byte 0x%x\n", state->output_byte);
835 push_to_output_queue(dev, data, COMMAND, KEYBOARD); // probably should be a call to deliver_key_to_vmm()
836 state->state = NORMAL;
837 PrintDebug("keyboard: injected key 0x%x\n", data);
840 case INJECTING_MOUSE:
841 push_to_output_queue(dev, data, DATA, MOUSE);
842 // PrintDebug("keyboard: ignoring injected mouse event 0x%x\n", data);
843 PrintDebug("keyboard: injected mouse event 0x%x\n", data);
844 state->state = NORMAL;
848 PrintDebug("keyboard: mouse action: ");
849 if (mouse_write_output(dev, data)) {
850 state->state = NORMAL;
855 case TRANSMIT_PASSWD:
858 PrintDebug("keyboard: ignoring password character 0x%x\n",data);
861 state->state = NORMAL;
862 PrintDebug("keyboard: done with password\n");
867 PrintDebug("Keyboard: LEDs being set...\n");
868 push_to_output_queue(dev, 0xfa, COMMAND, KEYBOARD);
869 state->state = NORMAL;
873 PrintDebug("Keyboard: Rate being set...\n");
874 push_to_output_queue(dev, 0xfa, COMMAND, KEYBOARD);
875 state->state = NORMAL;
880 // command is being sent to keyboard controller
883 push_to_output_queue(dev, 0xfa, COMMAND, KEYBOARD); // ack
884 push_to_output_queue(dev, 0xaa, COMMAND, KEYBOARD);
885 PrintDebug("keyboard: reset complete and acked\n");
888 case 0xf5: // disable scanning
889 case 0xf4: // enable scanning
891 push_to_output_queue(dev, 0xfa, COMMAND, KEYBOARD);
892 // should do something here... PAD
893 PrintDebug("keyboard: %s scanning done and acked\n", (data == 0xf5) ? "disable" : "enable");
897 push_to_output_queue(dev, 0xfa, COMMAND, KEYBOARD);
898 state->state = SET_RATE;
901 case 0xf2: // get keyboard ID
902 push_to_output_queue(dev, 0xfa, COMMAND, KEYBOARD);
903 push_to_output_queue(dev, 0xab, COMMAND, KEYBOARD);
904 push_to_output_queue(dev, 0x83, COMMAND, KEYBOARD);
905 PrintDebug("Keyboard: Requesting Keyboard ID\n");
908 case 0xed: // enable keyboard LEDs
909 push_to_output_queue(dev, 0xfa, COMMAND, KEYBOARD);
910 state->state = SET_LEDS;
914 case 0xfd: // set key type make
915 case 0xfc: // set key typ make/break
916 case 0xfb: // set key type typematic
917 case 0xfa: // set all typematic make/break/typematic
918 case 0xf9: // set all make
919 case 0xf8: // set all make/break
920 case 0xf7: // set all typemaktic
921 case 0xf6: // set defaults
922 PrintError("keyboard: unhandled known command 0x%x on output buffer (60h)\n", data);
927 PrintError("keyboard: unhandled unknown command 0x%x on output buffer (60h)\n", data);
928 state->status.out_buf_full = 1;
936 v3_unlock_irqrestore(state->kb_lock, irq_state);
941 static int keyboard_read_input(ushort_t port, void * dest, uint_t length, struct vm_device * dev) {
942 struct keyboard_internal * state = (struct keyboard_internal *)(dev->private_data);
945 PrintError("keyboard: unknown size read from input (60h)\n");
949 addr_t irq_state = v3_lock_irqsave(state->kb_lock);
951 pull_from_output_queue(dev, (uint8_t *)dest);
953 v3_unlock_irqrestore(state->kb_lock, irq_state);
955 PrintDebug("keyboard: read from input (60h): 0x%x\n", *(uint8_t *)dest);
965 static int keyboard_free(struct vm_device * dev) {
967 v3_dev_unhook_io(dev, KEYBOARD_60H);
968 v3_dev_unhook_io(dev, KEYBOARD_64H);
969 #if KEYBOARD_DEBUG_80H
970 v3_dev_unhook_io(dev, KEYBOARD_DELAY_80H);
972 keyboard_reset_device(dev);
980 static struct v3_device_ops dev_ops = {
981 .free = keyboard_free,
982 .reset = keyboard_reset_device,
983 .start = keyboard_start_device,
984 .stop = keyboard_stop_device,
990 static int keyboard_init(struct guest_info * vm, v3_cfg_tree_t * cfg) {
991 struct keyboard_internal * keyboard_state = NULL;
992 char * name = v3_cfg_val(cfg, "name");
994 PrintDebug("keyboard: init_device\n");
996 keyboard_state = (struct keyboard_internal *)V3_Malloc(sizeof(struct keyboard_internal));
998 keyboard_state->mouse_queue.start = 0;
999 keyboard_state->mouse_queue.end = 0;
1000 keyboard_state->mouse_queue.count = 0;
1002 keyboard_state->kbd_queue.start = 0;
1003 keyboard_state->kbd_queue.end = 0;
1004 keyboard_state->kbd_queue.count = 0;
1006 keyboard_state->mouse_enabled = 0;
1008 struct vm_device * dev = v3_allocate_device(name, &dev_ops, keyboard_state);
1010 if (v3_attach_device(vm, dev) == -1) {
1011 PrintError("Could not attach device %s\n", name);
1016 keyboard_reset_device(dev);
1019 v3_lock_init(&(keyboard_state->kb_lock));
1023 v3_dev_hook_io(dev, KEYBOARD_64H, &keyboard_read_status, &keyboard_write_command);
1024 v3_dev_hook_io(dev, KEYBOARD_60H, &keyboard_read_input, &keyboard_write_output);
1026 v3_hook_host_event(vm, HOST_KEYBOARD_EVT, V3_HOST_EVENT_HANDLER(key_event_handler), dev);
1027 v3_hook_host_event(vm, HOST_MOUSE_EVT, V3_HOST_EVENT_HANDLER(mouse_event_handler), dev);
1030 #if KEYBOARD_DEBUG_80H
1031 v3_dev_hook_io(dev, KEYBOARD_DELAY_80H, &keyboard_read_delay, &keyboard_write_delay);
1036 // We do not hook the IRQ here. Instead, the underlying device driver
1037 // is responsible to call us back
1044 device_register("KEYBOARD", keyboard_init)