#include <palacios/vmm_lowlevel.h>
#include <palacios/vmm_ctrl_regs.h>
#include <palacios/vmm_config.h>
+#include <palacios/vmm_time.h>
#include <palacios/vm_guest_mem.h>
#include <palacios/vmm_direct_paging.h>
#include <palacios/vmx_io.h>
#include <palacios/vmx_msr.h>
+
+#ifndef CONFIG_DEBUG_VMX
+#undef PrintDebug
+#define PrintDebug(fmt, args...)
+#endif
+
+
static addr_t host_vmcs_ptrs[CONFIG_MAX_CPUS] = { [0 ... CONFIG_MAX_CPUS - 1] = 0};
vmx_state->pri_proc_ctrls.invlpg_exit = 1;
vmx_state->pri_proc_ctrls.use_msr_bitmap = 1;
vmx_state->pri_proc_ctrls.pause_exit = 1;
+ vmx_state->pri_proc_ctrls.tsc_offset = 1;
+#ifdef CONFIG_TIME_VIRTUALIZE_TSC
+ vmx_state->pri_proc_ctrls.rdtsc_exit = 1;
+#endif
vmx_ret |= check_vmcs_write(VMCS_IO_BITMAP_A_ADDR, (addr_t)V3_PAddr(info->vm_info->io_map.arch_data));
vmx_ret |= check_vmcs_write(VMCS_IO_BITMAP_B_ADDR,
#define VMXASSIST_GDT 0x10000
addr_t vmxassist_gdt = 0;
- if (guest_pa_to_host_va(info, VMXASSIST_GDT, &vmxassist_gdt) == -1) {
+ if (v3_gpa_to_hva(info, VMXASSIST_GDT, &vmxassist_gdt) == -1) {
PrintError("Could not find VMXASSIST GDT destination\n");
return -1;
}
extern uint8_t v3_vmxassist_end[];
addr_t vmxassist_dst = 0;
- if (guest_pa_to_host_va(info, VMXASSIST_START, &vmxassist_dst) == -1) {
+ if (v3_gpa_to_hva(info, VMXASSIST_START, &vmxassist_dst) == -1) {
PrintError("Could not find VMXASSIST destination\n");
return -1;
}
info->dbg_regs.dr7 = 0x400;
+#ifdef __V3_64BIT__
vmx_ret |= check_vmcs_write(VMCS_LINK_PTR, (addr_t)0xffffffffffffffffULL);
-
+#else
+ vmx_ret |= check_vmcs_write(VMCS_LINK_PTR, (addr_t)0xffffffffUL);
+ vmx_ret |= check_vmcs_write(VMCS_LINK_PTR_HIGH, (addr_t)0xffffffffUL);
+#endif
if (v3_update_vmcs_ctrl_fields(info)) {
PrintError("Could not write control fields!\n");
return 0;
}
+
+int v3_deinit_vmx_vmcs(struct guest_info * core) {
+ struct vmx_data * vmx_state = core->vmm_data;
+
+ V3_FreePages((void *)(vmx_state->vmcs_ptr_phys), 1);
+
+ V3_Free(vmx_state);
+
+ return 0;
+}
+
+
static int update_irq_exit_state(struct guest_info * info) {
struct vmx_exit_idt_vec_info idt_vec_info;
int_info.valid = 1;
#ifdef CONFIG_DEBUG_INTERRUPTS
- PrintDebug("Injecting exception %d (EIP=%p)\n", int_info.vector, (void *)info->rip);
+ PrintDebug("Injecting exception %d (EIP=%p)\n", int_info.vector, (void *)(addr_t)info->rip);
#endif
check_vmcs_write(VMCS_ENTRY_INT_INFO, int_info.value);
PrintDebug("Injecting Interrupt %d at exit %u(EIP=%p)\n",
info->intr_core_state.irq_vector,
(uint32_t)info->num_exits,
- (void *)info->rip);
+ (void *)(addr_t)info->rip);
#endif
check_vmcs_write(VMCS_ENTRY_INT_INFO, ent_int.value);
*/
int v3_vmx_enter(struct guest_info * info) {
int ret = 0;
- uint64_t tmp_tsc = 0;
+ uint32_t tsc_offset_low, tsc_offset_high;
struct vmx_exit_info exit_info;
// Conditionally yield the CPU if the timeslice has expired
v3_yield_cond(info);
+ // Perform any additional yielding needed for time adjustment
+ v3_adjust_time(info);
- // v3_print_guest_state(info);
+ // Update timer devices prior to entering VM.
+ v3_update_timers(info);
// disable global interrupts for vm state transition
v3_disable_ints();
v3_vmx_restore_vmcs(info);
-#ifdef CONFIG_SYMBIOTIC
- if (info->vm_info->sym_state.symcalls[info->cpu_id].sym_call_active == 0) {
+#ifdef CONFIG_SYMCALL
+ if (info->sym_core_state.symcall_state.sym_call_active == 0) {
update_irq_entry_state(info);
}
#else
vmcs_write(VMCS_GUEST_CR3, guest_cr3);
}
- rdtscll(info->time_state.cached_host_tsc);
+ // Perform last-minute time bookkeeping prior to entering the VM
+ v3_time_enter_vm(info);
+
+ tsc_offset_high = (uint32_t)((v3_tsc_host_offset(&info->time_state) >> 32) & 0xffffffff);
+ tsc_offset_low = (uint32_t)(v3_tsc_host_offset(&info->time_state) & 0xffffffff);
+ check_vmcs_write(VMCS_TSC_OFFSET_HIGH, tsc_offset_high);
+ check_vmcs_write(VMCS_TSC_OFFSET, tsc_offset_low);
if (info->vm_info->run_state == VM_STOPPED) {
info->vm_info->run_state = VM_RUNNING;
return -1;
}
- rdtscll(tmp_tsc);
+ // Immediate exit from VM time bookkeeping
+ v3_time_exit_vm(info);
info->num_exits++;
- v3_update_time(info, tmp_tsc - info->time_state.cached_host_tsc);
-
/* Update guest state */
v3_vmx_save_vmcs(info);
exit_log[info->num_exits % 10] = exit_info;
-#ifdef CONFIG_SYMBIOTIC
- if (info->vm_info->sym_state.symcalls[info->cpu_id].sym_call_active == 0) {
+#ifdef CONFIG_SYMCALL
+ if (info->sym_core_state.symcall_state.sym_call_active == 0) {
update_irq_exit_state(info);
}
#else
}
-int v3_start_vmx_guest(struct guest_info* info) {
+int v3_start_vmx_guest(struct guest_info * info) {
+
+ PrintDebug("Starting VMX core %u\n", info->cpu_id);
+
+ if (info->cpu_id == 0) {
+ info->core_run_state = CORE_RUNNING;
+ info->vm_info->run_state = VM_RUNNING;
+ } else {
+
+ PrintDebug("VMX core %u: Waiting for core initialization\n", info->cpu_id);
+
+ while (info->core_run_state == CORE_STOPPED) {
+ v3_yield(info);
+ //PrintDebug("VMX core %u: still waiting for INIT\n",info->cpu_id);
+ }
+
+ PrintDebug("VMX core %u initialized\n", info->cpu_id);
+ }
+
+ PrintDebug("VMX core %u: I am starting at CS=0x%x (base=0x%p, limit=0x%x), RIP=0x%p\n",
+ info->cpu_id, info->segments.cs.selector, (void *)(info->segments.cs.base),
+ info->segments.cs.limit, (void *)(info->rip));
- PrintDebug("Launching VMX guest\n");
- rdtscll(info->time_state.cached_host_tsc);
+ PrintDebug("VMX core %u: Launching VMX VM\n", info->cpu_id);
+ v3_start_time(info);
while (1) {
+
+ if (info->vm_info->run_state == VM_STOPPED) {
+ info->core_run_state = CORE_STOPPED;
+ break;
+ }
+
if (v3_vmx_enter(info) == -1) {
v3_print_vmcs();
print_exit_log(info);
return -1;
}
+
+
+ if (info->vm_info->run_state == VM_STOPPED) {
+ info->core_run_state = CORE_STOPPED;
+ break;
+ }
/*
if ((info->num_exits % 5000) == 0) {
V3_Print("VMX Exit number %d\n", (uint32_t)info->num_exits);
struct v3_msr tmp_msr;
uint64_t ret = 0;
- v3_get_msr(VMX_CR4_FIXED0_MSR,&(tmp_msr.hi),&(tmp_msr.lo));
-
+ v3_get_msr(VMX_CR4_FIXED0_MSR, &(tmp_msr.hi), &(tmp_msr.lo));
+
+#ifdef __V3_64BIT__
__asm__ __volatile__ (
"movq %%cr4, %%rbx;"
"orq $0x00002000, %%rbx;"
:
: "%rbx"
);
+#elif __V3_32BIT__
+ __asm__ __volatile__ (
+ "movl %%cr4, %%ecx;"
+ "orl $0x00002000, %%ecx;"
+ "movl %%ecx, %0;"
+ : "=m"(ret)
+ :
+ : "%ecx"
+ );
+
+ if ((~ret & tmp_msr.value) == 0) {
+ __asm__ __volatile__ (
+ "movl %0, %%cr4;"
+ :
+ : "q"(ret)
+ );
+ } else {
+ PrintError("Invalid CR4 Settings!\n");
+ return;
+ }
+
+ __asm__ __volatile__ (
+ "movl %%cr0, %%ecx; "
+ "orl $0x00000020,%%ecx; "
+ "movl %%ecx, %%cr0;"
+ :
+ :
+ : "%ecx"
+ );
+
+#endif
+
//
// Should check and return Error here....
}
+
+void v3_deinit_vmx_cpu(int cpu_id) {
+ extern v3_cpu_arch_t v3_cpu_types[];
+ v3_cpu_types[cpu_id] = V3_INVALID_CPU;
+ V3_FreePages((void *)host_vmcs_ptrs[cpu_id], 1);
+}
