#include <palacios/vmx_io.h>
#include <palacios/vmx_msr.h>
+
+#ifndef CONFIG_DEBUG_VMX
+#undef PrintDebug
+#define PrintDebug(fmt, args...)
+#endif
+
+
static addr_t host_vmcs_ptrs[CONFIG_MAX_CPUS] = { [0 ... CONFIG_MAX_CPUS - 1] = 0};
vmx_state->pri_proc_ctrls.invlpg_exit = 1;
vmx_state->pri_proc_ctrls.use_msr_bitmap = 1;
vmx_state->pri_proc_ctrls.pause_exit = 1;
+ vmx_state->pri_proc_ctrls.tsc_offset = 1;
+#ifdef CONFIG_TIME_VIRTUALIZE_TSC
+ vmx_state->pri_proc_ctrls.rdtsc_exit = 1;
+#endif
vmx_ret |= check_vmcs_write(VMCS_IO_BITMAP_A_ADDR, (addr_t)V3_PAddr(info->vm_info->io_map.arch_data));
vmx_ret |= check_vmcs_write(VMCS_IO_BITMAP_B_ADDR,
#define VMXASSIST_GDT 0x10000
addr_t vmxassist_gdt = 0;
- if (guest_pa_to_host_va(info, VMXASSIST_GDT, &vmxassist_gdt) == -1) {
+ if (v3_gpa_to_hva(info, VMXASSIST_GDT, &vmxassist_gdt) == -1) {
PrintError("Could not find VMXASSIST GDT destination\n");
return -1;
}
extern uint8_t v3_vmxassist_end[];
addr_t vmxassist_dst = 0;
- if (guest_pa_to_host_va(info, VMXASSIST_START, &vmxassist_dst) == -1) {
+ if (v3_gpa_to_hva(info, VMXASSIST_START, &vmxassist_dst) == -1) {
PrintError("Could not find VMXASSIST destination\n");
return -1;
}
info->dbg_regs.dr7 = 0x400;
+#ifdef __V3_64BIT__
vmx_ret |= check_vmcs_write(VMCS_LINK_PTR, (addr_t)0xffffffffffffffffULL);
-
+#else
+ vmx_ret |= check_vmcs_write(VMCS_LINK_PTR, (addr_t)0xffffffffUL);
+ vmx_ret |= check_vmcs_write(VMCS_LINK_PTR_HIGH, (addr_t)0xffffffffUL);
+#endif
if (v3_update_vmcs_ctrl_fields(info)) {
PrintError("Could not write control fields!\n");
*/
int v3_vmx_enter(struct guest_info * info) {
int ret = 0;
- uint64_t tmp_tsc = 0;
+ uint32_t tsc_offset_low, tsc_offset_high;
struct vmx_exit_info exit_info;
// Conditionally yield the CPU if the timeslice has expired
v3_yield_cond(info);
+ /* If this guest is frequency-lagged behind host time, wait
+ * for the appropriate host time before resuming the guest. */
+ v3_adjust_time(info);
// v3_print_guest_state(info);
vmcs_write(VMCS_GUEST_CR3, guest_cr3);
}
- // We do timer injection here to track real host time.
- rdtscll(tmp_tsc);
- v3_update_time(info, tmp_tsc - info->time_state.cached_host_tsc - info->time_state.cached_hlt_tsc);
- info->time_state.cached_hlt_tsc = 0;
- rdtscll(info->time_state.cached_host_tsc);
+ v3_update_timers(info);
+
+ tsc_offset_high = (uint32_t)((v3_tsc_host_offset(&info->time_state) >> 32) & 0xffffffff);
+ tsc_offset_low = (uint32_t)(v3_tsc_host_offset(&info->time_state) & 0xffffffff);
+ check_vmcs_write(VMCS_TSC_OFFSET_HIGH, tsc_offset_high);
+ check_vmcs_write(VMCS_TSC_OFFSET, tsc_offset_low);
if (info->vm_info->run_state == VM_STOPPED) {
info->vm_info->run_state = VM_RUNNING;
return -1;
}
- // rdtscll(tmp_tsc);
- // v3_update_time(info, tmp_tsc - info->time_state.cached_host_tsc);
-
info->num_exits++;
-
/* Update guest state */
v3_vmx_save_vmcs(info);
}
-int v3_start_vmx_guest(struct guest_info* info) {
+int v3_start_vmx_guest(struct guest_info * info) {
+
+ PrintDebug("Starting VMX core %u\n", info->cpu_id);
+
+ if (info->cpu_id == 0) {
+ info->core_run_state = CORE_RUNNING;
+ info->vm_info->run_state = VM_RUNNING;
+ } else {
+
+ PrintDebug("VMX core %u: Waiting for core initialization\n", info->cpu_id);
+
+ while (info->core_run_state == CORE_STOPPED) {
+ v3_yield(info);
+ //PrintDebug("VMX core %u: still waiting for INIT\n",info->cpu_id);
+ }
+
+ PrintDebug("VMX core %u initialized\n", info->cpu_id);
+ }
- PrintDebug("Launching VMX guest\n");
+ PrintDebug("VMX core %u: I am starting at CS=0x%x (base=0x%p, limit=0x%x), RIP=0x%p\n",
+ info->cpu_id, info->segments.cs.selector, (void *)(info->segments.cs.base),
+ info->segments.cs.limit, (void *)(info->rip));
- rdtscll(info->time_state.cached_host_tsc);
+ PrintDebug("VMX core %u: Launching VMX VM\n", info->cpu_id);
+
+ v3_start_time(info);
while (1) {
+
+ if (info->vm_info->run_state == VM_STOPPED) {
+ info->core_run_state = CORE_STOPPED;
+ break;
+ }
+
if (v3_vmx_enter(info) == -1) {
v3_print_vmcs();
print_exit_log(info);
return -1;
}
+
+
+ if (info->vm_info->run_state == VM_STOPPED) {
+ info->core_run_state = CORE_STOPPED;
+ break;
+ }
/*
if ((info->num_exits % 5000) == 0) {
V3_Print("VMX Exit number %d\n", (uint32_t)info->num_exits);