* redistribute, and modify it as specified in the file "V3VEE_LICENSE".
*/
-#include <palacios/vmm_time.h>
#include <palacios/vmm.h>
+#include <palacios/vmm_time.h>
#include <palacios/vm_guest.h>
-#ifndef CONFIG_DEBUG_TIME
+#ifndef V3_CONFIG_DEBUG_TIME
#undef PrintDebug
#define PrintDebug(fmt, args...)
#endif
uint64_t t = v3_get_host_time(&info->time_state);
PrintDebug("Starting initial guest time as %llu\n", t);
+
info->time_state.enter_time = 0;
info->time_state.exit_time = t;
info->time_state.last_update = t;
info->time_state.initial_time = t;
info->yield_start_cycle = t;
+
return 0;
}
-// If the guest is supposed to run slower than the host, yield out until
-// the host time is appropriately far along;
-int v3_adjust_time(struct guest_info * info) {
+int v3_offset_time( struct guest_info * info, sint64_t offset )
+{
struct vm_time * time_state = &(info->time_state);
+// PrintDebug("Adding additional offset of %lld to guest time.\n", offset);
+ time_state->guest_host_offset += offset;
+ return 0;
+}
- if (time_state->host_cpu_freq != time_state->guest_cpu_freq) {
- uint64_t guest_time, host_time, target_host_time;
- sint64_t guest_elapsed, desired_elapsed;
+static uint64_t compute_target_host_time(struct guest_info * info)
+{
+ struct vm_time * time_state = &(info->time_state);
+ uint64_t guest_elapsed, desired_elapsed;
+
+ guest_elapsed = (v3_get_guest_time(time_state) - time_state->initial_time);
+ desired_elapsed = (guest_elapsed * time_state->host_cpu_freq) / time_state->guest_cpu_freq;
+ return time_state->initial_time + desired_elapsed;
+}
- guest_time = v3_get_guest_time(time_state);
+static uint64_t compute_target_guest_time(struct guest_info *info)
+{
+ struct vm_time * time_state = &(info->time_state);
+ uint64_t host_elapsed, desired_elapsed;
- /* Compute what host time this guest time should correspond to. */
- guest_elapsed = (guest_time - time_state->initial_time);
- desired_elapsed = (guest_elapsed * time_state->host_cpu_freq) / time_state->guest_cpu_freq;
- target_host_time = time_state->initial_time + desired_elapsed;
+ host_elapsed = v3_get_host_time(time_state) - time_state->initial_time;
+ desired_elapsed = (host_elapsed * time_state->guest_cpu_freq) / time_state->host_cpu_freq;
- /* Yield until that host time is reached */
+ return time_state->initial_time + desired_elapsed;
+
+}
+
+/* Yield time in the host to deal with a guest that wants to run slower than
+ * the native host cycle frequency */
+static int yield_host_time(struct guest_info * info) {
+ struct vm_time * time_state = &(info->time_state);
+ uint64_t host_time, target_host_time;
+ uint64_t guest_time, old_guest_time;
+
+ /* Compute the target host time given how much time has *already*
+ * passed in the guest */
+ target_host_time = compute_target_host_time(info);
+
+ /* Now, let the host run while the guest is stopped to make the two
+ * sync up. Note that this doesn't assume that guest time is stopped;
+ * the offsetting in the next step will change add an offset to guest
+ * time to account for the time paused even if the geust isn't
+ * usually paused in the VMM. */
+ host_time = v3_get_host_time(time_state);
+ old_guest_time = v3_get_guest_time(time_state);
+
+ while (target_host_time > host_time) {
+ v3_yield(info);
host_time = v3_get_host_time(time_state);
+ }
- if (host_time < target_host_time) {
- PrintDebug("Yielding until host time (%llu) greater than target (%llu).\n", host_time, target_host_time);
- }
+ guest_time = v3_get_guest_time(time_state);
+
+ /* We do *not* assume the guest timer was paused in the VM. If it was
+ * this offseting is 0. If it wasn't, we need this. */
+ v3_offset_time(info, (sint64_t)old_guest_time - (sint64_t)guest_time);
+
+ return 0;
+}
+
+static int skew_guest_time(struct guest_info * info) {
+ struct vm_time * time_state = &(info->time_state);
+ uint64_t target_guest_time, guest_time;
+ /* Now the host may have gotten ahead of the guest because
+ * yielding is a coarse grained thing. Figure out what guest time
+ * we want to be at, and use the use the offsetting mechanism in
+ * the VMM to make the guest run forward. We limit *how* much we skew
+ * it forward to prevent the guest time making large jumps,
+ * however. */
+ target_guest_time = compute_target_guest_time(info);
+ guest_time = v3_get_guest_time(time_state);
+
+ if (guest_time < target_guest_time) {
+ sint64_t max_skew, desired_skew, skew;
- while (host_time < target_host_time) {
- v3_yield(info);
- host_time = v3_get_host_time(time_state);
+ if (time_state->enter_time) {
+ /* Limit forward skew to 10% of the amount the guest has
+ * run since we last could skew time */
+ max_skew = ((sint64_t)guest_time - (sint64_t)time_state->enter_time) / 10;
+ } else {
+ max_skew = 0;
}
-#ifndef CONFIG_TIME_HIDE_VM_COST
- // XXX This should turn into a target offset we want to move towards XXX
- time_state->guest_host_offset =
- (sint64_t)guest_time - (sint64_t)host_time;
-#endif
+ desired_skew = (sint64_t)target_guest_time - (sint64_t)guest_time;
+ skew = desired_skew > max_skew ? max_skew : desired_skew;
+ PrintDebug("Guest %lld cycles behind where it should be.\n",
+ desired_skew);
+ PrintDebug("Limit on forward skew is %lld. Skewing forward %lld.\n",
+ max_skew, skew);
+
+ v3_offset_time(info, skew);
}
return 0;
}
+// Control guest time in relation to host time so that the two stay
+// appropriately synchronized to the extent possible.
+int v3_adjust_time(struct guest_info * info) {
+
+ /* First deal with yielding if we want to slow down the guest */
+ yield_host_time(info);
+
+ /* Now, if the guest is too slow, (either from excess yielding above,
+ * or because the VMM is doing something that takes a long time to emulate)
+ * allow guest time to jump forward a bit */
+ skew_guest_time(info);
+
+ return 0;
+}
+
/* Called immediately upon entry in the the VMM */
int
v3_time_exit_vm( struct guest_info * info )
time_state->exit_time = v3_get_host_time(time_state);
-#ifdef CONFIG_TIME_HIDE_EXIT_COST
- // XXX should make the cost adjustment a runtime parameter
- // so it can be set by the config file and/or tuned dynamically
- v3_offset_time(info, -CONFIG_TIME_EXIT_COST_ADJUST);
-#endif
return 0;
}
v3_time_enter_vm( struct guest_info * info )
{
struct vm_time * time_state = &(info->time_state);
+ uint64_t guest_time, host_time;
- time_state->enter_time = v3_get_host_time(time_state);
-#ifdef CONFIG_TIME_HIDE_VM_COST
- if (time_state->exit_time) {
- sint64_t pause_diff = time_state->enter_time - time_state->exit_time;
- time_state->guest_host_offset -= pause_diff;
- } else {
- PrintError( "Time at which guest exited to VM not recorded!\n" );
- }
-#endif
- time_state->exit_time = 0;
+ host_time = v3_get_host_time(time_state);
+ guest_time = v3_get_guest_time(time_state);
+ time_state->enter_time = host_time;
+ time_state->guest_host_offset = (sint64_t)guest_time - (sint64_t)host_time;
return 0;
}
-int v3_offset_time( struct guest_info * info, sint64_t offset )
-{
- struct vm_time * time_state = &(info->time_state);
-// PrintDebug("Adding additional offset of %lld to guest time.\n", offset);
- time_state->guest_host_offset += offset;
- return 0;
-}
+
struct v3_timer * v3_add_timer(struct guest_info * info,
struct v3_timer_ops * ops,
time_state->last_update = v3_get_guest_time(time_state);
cycles = time_state->last_update - old_time;
+ V3_ASSERT(cycles >= 0);
+ // V3_Print("Updating timers with %lld elapsed cycles.\n", cycles);
list_for_each_entry(tmp_timer, &(time_state->timers), timer_link) {
tmp_timer->ops->update_timer(info, cycles, time_state->guest_cpu_freq, tmp_timer->private_data);
}
int v3_rdtsc(struct guest_info * info) {
uint64_t tscval = v3_get_guest_tsc(&info->time_state);
+
info->vm_regs.rdx = tscval >> 32;
info->vm_regs.rax = tscval & 0xffffffffLL;
+
return 0;
}
if (khz) {
time_state->guest_cpu_freq = atoi(khz);
- PrintDebug("Core %d CPU frequency requested at %d khz.\n",
- info->cpu_id, time_state->guest_cpu_freq);
+ PrintDebug("Logical Core %d (vcpu=%d) CPU frequency requested at %d khz.\n",
+ info->pcpu_id, info->vcpu_id, time_state->guest_cpu_freq);
}
- if ((khz == NULL) || (time_state->guest_cpu_freq <= 0)
- || (time_state->guest_cpu_freq > time_state->host_cpu_freq)) {
+ if ( (khz == NULL) ||
+ (time_state->guest_cpu_freq <= 0) ||
+ (time_state->guest_cpu_freq > time_state->host_cpu_freq) ) {
+
time_state->guest_cpu_freq = time_state->host_cpu_freq;
}
- PrintDebug("Core %d CPU frequency set to %d KHz (host CPU frequency = %d KHz).\n",
- info->cpu_id,
+ PrintDebug("Logical Core %d (vcpu=%d) CPU frequency set to %d KHz (host CPU frequency = %d KHz).\n",
+ info->pcpu_id, info->vcpu_id,
time_state->guest_cpu_freq,
time_state->host_cpu_freq);
time_state->tsc_aux.lo = 0;
time_state->tsc_aux.hi = 0;
-
-
}
}
}
-
-
-
-
-
-