/* We start running with guest_time == host_time */
uint64_t t = v3_get_host_time(&info->time_state);
- info->time_state.enter_time = 0;
- info->time_state.exit_time = t;
- info->time_state.initial_time = t;
+ info->time_state.initial_host_time = t;
info->yield_start_cycle = t;
info->time_state.last_update = 0;
return 0;
}
-int v3_offset_time( struct guest_info * info, sint64_t offset )
-{
- struct vm_core_time * time_state = &(info->time_state);
- PrintDebug("Adding additional offset of %lld to guest time.\n", offset);
- time_state->guest_cycles += offset;
- return 0;
-}
-
-#ifdef V3_CONFIG_TIME_DILATION
-static uint64_t compute_target_host_time(struct guest_info * info, uint64_t guest_time)
-{
- struct vm_core_time * time_state = &(info->time_state);
- uint64_t guest_elapsed, desired_elapsed;
-
- guest_elapsed = (guest_time - time_state->initial_time);
- desired_elapsed = (guest_elapsed * time_state->host_cpu_freq) / time_state->guest_cpu_freq;
- return time_state->initial_time + desired_elapsed;
-}
-
-static uint64_t compute_target_guest_time(struct guest_info *info)
-{
- struct vm_core_time * time_state = &(info->time_state);
- uint64_t host_elapsed, desired_elapsed;
-
- host_elapsed = v3_get_host_time(time_state) - time_state->initial_time;
- desired_elapsed = (host_elapsed * time_state->guest_cpu_freq) / time_state->host_cpu_freq;
-
- return time_state->initial_time + desired_elapsed;
-
-}
+static sint64_t
+host_to_guest_cycles(struct guest_info * info, sint64_t host_cycles) {
+ struct vm_core_time * core_time_state = &(info->time_state);
+ uint32_t cl_num, cl_denom;
-/* Yield time in the host to deal with a guest that wants to run slower than
- * the native host cycle frequency */
-static int yield_host_time(struct guest_info * info) {
- struct vm_core_time * time_state = &(info->time_state);
- uint64_t host_time, target_host_time;
- uint64_t guest_time, old_guest_time;
-
- /* Now, let the host run while the guest is stopped to make the two
- * sync up. Note that this doesn't assume that guest time is stopped;
- * the offsetting in the next step will change add an offset to guest
- * time to account for the time paused even if the geust isn't
- * usually paused in the VMM. */
- host_time = v3_get_host_time(time_state);
- old_guest_time = v3_get_guest_time(time_state);
- target_host_time = compute_target_host_time(info, old_guest_time);
-
- while (target_host_time > host_time) {
- v3_yield(info);
- host_time = v3_get_host_time(time_state);
- }
-
- guest_time = v3_get_guest_time(time_state);
+ cl_num = core_time_state->clock_ratio_num;
+ cl_denom = core_time_state->clock_ratio_denom;
- /* We do *not* assume the guest timer was paused in the VM. If it was
- * this offseting is 0. If it wasn't, we need this. */
- v3_offset_time(info, (sint64_t)(old_guest_time - guest_time));
-
- return 0;
+ return (host_cycles * cl_num) / cl_denom;
}
-static int skew_guest_time(struct guest_info * info) {
- struct vm_core_time * time_state = &(info->time_state);
- uint64_t target_guest_time, guest_time;
- /* Now the host may have gotten ahead of the guest because
- * yielding is a coarse grained thing. Figure out what guest time
- * we want to be at, and use the use the offsetting mechanism in
- * the VMM to make the guest run forward. We limit *how* much we skew
- * it forward to prevent the guest time making large jumps,
- * however. */
- target_guest_time = compute_target_guest_time(info);
- guest_time = v3_get_guest_time(time_state);
-
- if (guest_time < target_guest_time) {
- sint64_t max_skew, desired_skew, skew;
+/*
+static sint64_t
+guest_to_host_cycles(struct guest_info * info, sint64_t guest_cycles) {
+ struct vm_core_time * core_time_state = &(info->time_state);
+ uint32_t cl_num, cl_denom;
- if (time_state->enter_time) {
- /* Limit forward skew to 10% of the amount the guest has
- * run since we last could skew time */
- max_skew = (sint64_t)(guest_time - time_state->enter_time) / 10;
- } else {
- max_skew = 0;
- }
-
- desired_skew = (sint64_t)(target_guest_time - guest_time);
- skew = desired_skew > max_skew ? max_skew : desired_skew;
- PrintDebug("Guest %lld cycles behind where it should be.\n",
- desired_skew);
- PrintDebug("Limit on forward skew is %lld. Skewing forward %lld.\n",
- max_skew, skew);
-
- v3_offset_time(info, skew);
- }
+ cl_num = core_time_state->clock_ratio_num;
+ cl_denom = core_time_state->clock_ratio_denom;
- return 0;
+ return (guest_cycles * cl_denom) / cl_num;
}
-#endif /* V3_CONFIG_TIME_DILATION */
-
-// Control guest time in relation to host time so that the two stay
-// appropriately synchronized to the extent possible.
-int v3_adjust_time(struct guest_info * info) {
+*/
-#ifdef V3_CONFIG_TIME_DILATION
- /* First deal with yielding if we want to slow down the guest */
- yield_host_time(info);
-
- /* Now, if the guest is too slow, (either from excess yielding above,
- * or because the VMM is doing something that takes a long time to emulate)
- * allow guest time to jump forward a bit */
- skew_guest_time(info);
-#endif
- return 0;
-}
-
-/* Called immediately upon entry in the the VMM */
-int
-v3_time_exit_vm( struct guest_info * info, uint64_t * guest_cycles )
+int v3_advance_time(struct guest_info * info, uint64_t *host_cycles)
{
- struct vm_core_time * time_state = &(info->time_state);
-
- time_state->exit_time = v3_get_host_time(time_state);
- if (guest_cycles) {
- time_state->guest_cycles += *guest_cycles;
+ uint64_t guest_cycles;
+
+ if (info->flags & VM_TIME_SLAVE_HOST) {
+ struct v3_time *vm_ts = &(info->vm_info->time_state);
+ uint64_t ht = v3_get_host_time(&info->time_state);
+ uint64_t host_elapsed = ht - info->time_state.initial_host_time;
+ uint64_t dilated_elapsed = (host_elapsed * vm_ts->td_num) / vm_ts->td_denom;
+ uint64_t guest_elapsed = host_to_guest_cycles(info, dilated_elapsed);
+ guest_cycles = guest_elapsed - v3_get_guest_time(&info->time_state);
+ } else if (host_cycles) {
+ guest_cycles = host_to_guest_cycles(info, *host_cycles);
} else {
- uint64_t cycles_exec;
- cycles_exec = time_state->exit_time - time_state->enter_time;
- time_state->guest_cycles += cycles_exec;
+ guest_cycles = 0;
}
- return 0;
-}
+
+ info->time_state.guest_cycles += guest_cycles;
-/* Called immediately prior to entry to the VM */
-int
-v3_time_enter_vm( struct guest_info * info )
-{
- struct vm_core_time * time_state = &(info->time_state);
- uint64_t host_time, vmm_cycles;
-
- host_time = v3_get_host_time(time_state);
- time_state->enter_time = host_time;
- vmm_cycles = host_time - time_state->exit_time;
- /* XXX How do we want to take into account host/guest CPU speed differences
- * and time dilation here? Probably time just won't advance in the VMM in that
- * case so its irrelvant XXX */
- time_state->guest_cycles += vmm_cycles;
return 0;
-}
-
+}
-
struct v3_timer * v3_add_timer(struct guest_info * info,
struct v3_timer_ops * ops,
void * private_data) {
struct vm_core_time *time_state = &info->time_state;
struct v3_timer * tmp_timer;
sint64_t cycles;
- uint64_t old_time = info->time_state.last_update;
+ uint64_t old_time = time_state->last_update;
time_state->last_update = v3_get_guest_time(time_state);
cycles = (sint64_t)(time_state->last_update - old_time);
- V3_ASSERT(cycles >= 0);
+ if (cycles < 0) {
+ PrintError("Cycles appears to have rolled over - old time %lld, current time %lld.\n",
+ old_time, time_state->last_update);
+ return;
+ }
- // V3_Print("Updating timers with %lld elapsed cycles.\n", cycles);
+ //PrintDebug("Updating timers with %lld elapsed cycles.\n", cycles);
list_for_each_entry(tmp_timer, &(time_state->timers), timer_link) {
tmp_timer->ops->update_timer(info, cycles, time_state->guest_cpu_freq, tmp_timer->private_data);
}
new_tsc = (((uint64_t)msr_val.hi) << 32) | (uint64_t)msr_val.lo;
guest_time = v3_get_guest_time(time_state);
- time_state->tsc_guest_offset = (sint64_t)new_tsc - (sint64_t)guest_time;
+ time_state->tsc_guest_offset = (sint64_t)(new_tsc - guest_time);
return 0;
}
+static int
+handle_time_configuration(struct v3_vm_info * vm, v3_cfg_tree_t *cfg) {
+ v3_cfg_tree_t * slave;
+
+ vm->time_state.flags = 0;
+ vm->time_state.td_num = vm->time_state.td_denom = 1;
+
+ if (!cfg) return 0;
+
+ slave = v3_cfg_subtree(cfg, "slave");
+
+ if (slave) {
+ char *source = v3_cfg_val(slave, "source");
+ v3_cfg_tree_t *dilation = v3_cfg_subtree(slave, "dilation");
+ if (source) {
+ if (strcasecmp(source, "host") == 0) {
+ PrintDebug("Slaving VM guest time to host time.\n");
+ vm->time_state.flags |= V3_TIME_SLAVE_HOST;
+ } else {
+ PrintError("Unknown time source for slaving.\n");
+ }
+ }
+ if (dilation && (vm->time_state.flags & V3_TIME_SLAVE_HOST)) {
+ char *str1, *str2;
+ uint32_t num = 1, denom = 1;
+ if ((str1 = v3_cfg_val(dilation, "value"))) {
+ denom = atoi(str1);
+ } else if ((str1 = v3_cfg_val(dilation, "num"))
+ && (str2 = v3_cfg_val(dilation, "denom"))) {
+ num = atoi(str1);
+ denom = atoi(str2);
+ }
+ if ((num > 0) && (denom > 0)) {
+ vm->time_state.td_num = num;
+ vm->time_state.td_denom = denom;
+ }
+ if ((vm->time_state.td_num != 1)
+ || (vm->time_state.td_denom != 1)) {
+ V3_Print("Time dilated from host time by a factor of %d/%d"
+ " in guest.\n", denom, num);
+ } else {
+ PrintError("Time dilation specifier in configuration did not"
+ " result in actual time dilation in VM.\n");
+ }
+ }
+ }
+ return 0;
+}
int v3_init_time_vm(struct v3_vm_info * vm) {
+ v3_cfg_tree_t * cfg_tree = vm->cfg_data->cfg;
int ret;
-
+
PrintDebug("Installing TSC MSR hook.\n");
ret = v3_hook_msr(vm, TSC_MSR,
tsc_msr_read_hook, tsc_msr_write_hook, NULL);
ret = v3_register_hypercall(vm, TIME_CPUFREQ_HCALL,
handle_cpufreq_hcall, NULL);
- vm->time_state.td_mult = 1;
- PrintDebug("Setting base time dilation factor to %d.\n", vm->time_state.td_mult);
+ handle_time_configuration(vm, v3_cfg_subtree(cfg_tree, "time"));
return ret;
}
v3_remove_hypercall(vm, TIME_CPUFREQ_HCALL);
}
+static uint32_t
+gcd ( uint32_t a, uint32_t b )
+{
+ uint32_t c;
+ while ( a != 0 ) {
+ c = a; a = b%a; b = c;
+ }
+ return b;
+}
+
+static int compute_core_ratios(struct guest_info * info,
+ uint32_t hostKhz, uint32_t guestKhz)
+{
+ struct vm_core_time * time_state = &(info->time_state);
+ uint32_t khzGCD;
+
+ /* Compute these using the GCD() of the guest and host CPU freq.
+ * If the GCD is too small, make it "big enough" */
+ khzGCD = gcd(hostKhz, guestKhz);
+ if (khzGCD < 1024)
+ khzGCD = 1024;
+
+ time_state->clock_ratio_num = guestKhz / khzGCD;
+ time_state->clock_ratio_denom = hostKhz / khzGCD;
+
+ time_state->ipc_ratio_num = 1;
+ time_state->ipc_ratio_denom = 1;
+
+ return 0;
+}
+
void v3_init_time_core(struct guest_info * info) {
struct vm_core_time * time_state = &(info->time_state);
v3_cfg_tree_t * cfg_tree = info->core_cfg_data;
time_state->guest_cpu_freq = time_state->host_cpu_freq;
}
-
PrintDebug("Logical Core %d (vcpu=%d) CPU frequency set to %d KHz (host CPU frequency = %d KHz).\n",
info->pcpu_id, info->vcpu_id,
time_state->guest_cpu_freq,
time_state->host_cpu_freq);
- time_state->initial_time = 0;
- time_state->last_update = 0;
- time_state->tsc_guest_offset = 0;
- time_state->enter_time = 0;
- time_state->exit_time = 0;
+ compute_core_ratios(info, time_state->host_cpu_freq,
+ time_state->guest_cpu_freq);
+
+ PrintDebug(" td_mult = %d/%d, cl_mult = %u/%u, ipc_mult = %u/%u.\n",
+ info->vm_info->time_state.td_num,
+ info->vm_info->time_state.td_denom,
+ time_state->clock_ratio_num, time_state->clock_ratio_denom,
+ time_state->ipc_ratio_num, time_state->ipc_ratio_denom);
time_state->guest_cycles = 0;
+ time_state->tsc_guest_offset = 0;
+ time_state->last_update = 0;
+
+ time_state->initial_host_time = 0;
+
+ time_state->flags = 0;
+ if (info->vm_info->time_state.flags & V3_TIME_SLAVE_HOST) {
+ time_state->flags |= VM_TIME_SLAVE_HOST;
+ }
+ if ((time_state->clock_ratio_denom != 1) ||
+ (time_state->clock_ratio_num != 1)) {
+ time_state->flags |= VM_TIME_TRAP_RDTSC;
+ }
INIT_LIST_HEAD(&(time_state->timers));
time_state->num_timers = 0;