+/*
+ * This file is part of the Palacios Virtual Machine Monitor developed
+ * by the V3VEE Project with funding from the United States National
+ * Science Foundation and the Department of Energy.
+ *
+ * The V3VEE Project is a joint project between Northwestern University
+ * and the University of New Mexico. You can find out more at
+ * http://www.v3vee.org
+ *
+ * Copyright (c) 2008, Jack Lange <jarusl@cs.northwestern.edu>
+ * Copyright (c) 2008, The V3VEE Project <http://www.v3vee.org>
+ * All rights reserved.
+ *
+ * Author: Jack Lange <jarusl@cs.northwestern.edu>
+ *
+ * This is free software. You are permitted to use,
+ * redistribute, and modify it as specified in the file "V3VEE_LICENSE".
+ */
+
#include <palacios/vmm_mem.h>
#include <palacios/vmm.h>
#include <palacios/vmcb.h>
#endif
-
-
-
-
// First Attempt = 494 lines
// current = 106 lines
-int handle_cr0_write(struct guest_info * info) {
- char instr[15];
+int v3_handle_cr0_write(struct guest_info * info) {
+ uchar_t instr[15];
int ret;
struct x86_instr dec_instr;
ret = read_guest_va_memory(info, get_addr_linear(info, info->rip, &(info->segments.cs)), 15, instr);
}
- if (ret != 15) {
+ /* The IFetch will already have faulted in the necessary bytes for the full instruction
+ if (ret != 15) {
// I think we should inject a GPF into the guest
PrintError("Could not read instruction (ret=%d)\n", ret);
return -1;
- }
+ }
+ */
if (v3_decode(info, (addr_t)instr, &dec_instr) == -1) {
PrintError("Could not decode instruction\n");
}
- if (opcode_cmp(V3_OPCODE_LMSW, (const uchar_t *)(dec_instr.opcode)) == 0) {
+ if (v3_opcode_cmp(V3_OPCODE_LMSW, (const uchar_t *)(dec_instr.opcode)) == 0) {
struct cr0_real *real_cr0 = (struct cr0_real*)&(info->ctrl_regs.cr0);
- struct cr0_real *new_cr0 = (struct cr0_real *)(dec_instr.first_operand.operand);
+ struct cr0_real *new_cr0 = (struct cr0_real *)(dec_instr.src_operand.operand);
uchar_t new_cr0_val;
PrintDebug("LMSW\n");
PrintDebug("OperandVal = %x\n", new_cr0_val);
- PrintDebug("Old CR0=%x\n", *real_cr0);
+ PrintDebug("Old CR0=%x\n", *(uint_t *)real_cr0);
*(uchar_t*)real_cr0 &= 0xf0;
*(uchar_t*)real_cr0 |= new_cr0_val;
- PrintDebug("New CR0=%x\n", *real_cr0);
+ PrintDebug("New CR0=%x\n", *(uint_t *)real_cr0);
if (info->shdw_pg_mode == SHADOW_PAGING) {
struct cr0_real * shadow_cr0 = (struct cr0_real*)&(info->shdw_pg_state.guest_cr0);
- PrintDebug(" Old Shadow CR0=%x\n", *shadow_cr0);
+ PrintDebug(" Old Shadow CR0=%x\n", *(uint_t *)shadow_cr0);
*(uchar_t*)shadow_cr0 &= 0xf0;
*(uchar_t*)shadow_cr0 |= new_cr0_val;
- PrintDebug("New Shadow CR0=%x\n", *shadow_cr0);
+ PrintDebug("New Shadow CR0=%x\n", *(uint_t *)shadow_cr0);
}
- } else if (opcode_cmp(V3_OPCODE_MOV2CR, (const uchar_t *)(dec_instr.opcode)) == 0) {
+ } else if (v3_opcode_cmp(V3_OPCODE_MOV2CR, (const uchar_t *)(dec_instr.opcode)) == 0) {
PrintDebug("MOV2CR0\n");
if (info->cpu_mode == LONG) {
} else {
// 32 bit registers
struct cr0_32 *real_cr0 = (struct cr0_32*)&(info->ctrl_regs.cr0);
- struct cr0_32 *new_cr0= (struct cr0_32 *)(dec_instr.second_operand.operand);
+ struct cr0_32 *new_cr0= (struct cr0_32 *)(dec_instr.src_operand.operand);
- PrintDebug("OperandVal = %x, length=%d\n", *new_cr0, dec_instr.first_operand.size);
+ PrintDebug("OperandVal = %x, length=%d\n", *(uint_t *)new_cr0, dec_instr.src_operand.size);
- PrintDebug("Old CR0=%x\n", *real_cr0);
+ PrintDebug("Old CR0=%x\n", *(uint_t *)real_cr0);
*real_cr0 = *new_cr0;
if (info->shdw_pg_mode == SHADOW_PAGING) {
struct cr0_32 * shadow_cr0 = (struct cr0_32 *)&(info->shdw_pg_state.guest_cr0);
- PrintDebug("Old Shadow CR0=%x\n", *shadow_cr0);
+ PrintDebug("Old Shadow CR0=%x\n", *(uint_t *)shadow_cr0);
real_cr0->et = 1;
*shadow_cr0 = *new_cr0;
shadow_cr0->et = 1;
- if (get_mem_mode(info) == VIRTUAL_MEM) {
+ if (v3_get_mem_mode(info) == VIRTUAL_MEM) {
struct cr3_32 * shadow_cr3 = (struct cr3_32 *)&(info->shdw_pg_state.shadow_cr3);
-
+ PrintDebug("Setting up Shadow Page Table\n");
info->ctrl_regs.cr3 = *(addr_t*)shadow_cr3;
} else {
info->ctrl_regs.cr3 = *(addr_t*)&(info->direct_map_pt);
real_cr0->pg = 1;
}
- PrintDebug("New Shadow CR0=%x\n",*shadow_cr0);
+ PrintDebug("New Shadow CR0=%x\n",*(uint_t *)shadow_cr0);
}
- PrintDebug("New CR0=%x\n", *real_cr0);
+ PrintDebug("New CR0=%x\n", *(uint_t *)real_cr0);
}
- } else if (opcode_cmp(V3_OPCODE_CLTS, (const uchar_t *)(dec_instr.opcode)) == 0) {
+ } else if (v3_opcode_cmp(V3_OPCODE_CLTS, (const uchar_t *)(dec_instr.opcode)) == 0) {
// CLTS
struct cr0_32 *real_cr0 = (struct cr0_32*)&(info->ctrl_regs.cr0);
// First attempt = 253 lines
// current = 51 lines
-int handle_cr0_read(struct guest_info * info) {
- char instr[15];
+int v3_handle_cr0_read(struct guest_info * info) {
+ uchar_t instr[15];
int ret;
struct x86_instr dec_instr;
ret = read_guest_va_memory(info, get_addr_linear(info, info->rip, &(info->segments.cs)), 15, instr);
}
- if (ret != 15) {
- // I think we should inject a GPF into the guest
- PrintError("Could not read instruction (ret=%d)\n", ret);
- return -1;
- }
+ /* The IFetch will already have faulted in the necessary bytes for the full instruction
+ if (ret != 15) {
+ // I think we should inject a GPF into the guest
+ PrintError("Could not read instruction (ret=%d)\n", ret);
+ return -1;
+ }
+ */
if (v3_decode(info, (addr_t)instr, &dec_instr) == -1) {
PrintError("Could not decode instruction\n");
return -1;
}
- if (opcode_cmp(V3_OPCODE_MOVCR2, (const uchar_t *)(dec_instr.opcode)) == 0) {
- struct cr0_32 * virt_cr0 = (struct cr0_32 *)(dec_instr.first_operand.operand);
+ if (v3_opcode_cmp(V3_OPCODE_MOVCR2, (const uchar_t *)(dec_instr.opcode)) == 0) {
+ struct cr0_32 * virt_cr0 = (struct cr0_32 *)(dec_instr.dst_operand.operand);
struct cr0_32 * real_cr0 = (struct cr0_32 *)&(info->ctrl_regs.cr0);
PrintDebug("MOVCR2\n");
- PrintDebug("CR0 at 0x%x\n", real_cr0);
+ PrintDebug("CR0 at 0x%p\n", (void *)real_cr0);
if (info->shdw_pg_mode == SHADOW_PAGING) {
*virt_cr0 = *(struct cr0_32 *)&(info->shdw_pg_state.guest_cr0);
PrintDebug("real CR0: %x\n", *(uint_t*)real_cr0);
PrintDebug("returned CR0: %x\n", *(uint_t*)virt_cr0);
- } else if (opcode_cmp(V3_OPCODE_SMSW, (const uchar_t *)(dec_instr.opcode)) == 0) {
+ } else if (v3_opcode_cmp(V3_OPCODE_SMSW, (const uchar_t *)(dec_instr.opcode)) == 0) {
struct cr0_real *real_cr0= (struct cr0_real*)&(info->ctrl_regs.cr0);
- struct cr0_real *virt_cr0 = (struct cr0_real *)(dec_instr.first_operand.operand);
+ struct cr0_real *virt_cr0 = (struct cr0_real *)(dec_instr.dst_operand.operand);
char cr0_val = *(char*)real_cr0 & 0x0f;
PrintDebug("SMSW\n");
- PrintDebug("CR0 at 0x%x\n", real_cr0);
+ PrintDebug("CR0 at 0x%p\n", real_cr0);
*(char *)virt_cr0 &= 0xf0;
*(char *)virt_cr0 |= cr0_val;
-// First Attemp = 256 lines
+// First Attempt = 256 lines
// current = 65 lines
-int handle_cr3_write(struct guest_info * info) {
+int v3_handle_cr3_write(struct guest_info * info) {
int ret;
- char instr[15];
+ uchar_t instr[15];
struct x86_instr dec_instr;
if (info->mem_mode == PHYSICAL_MEM) {
ret = read_guest_va_memory(info, get_addr_linear(info, info->rip, &(info->segments.cs)), 15, instr);
}
- if (ret != 15) {
- // I think we should inject a GPF into the guest
- PrintError("Could not read instruction (ret=%d)\n", ret);
- return -1;
- }
+ /* The IFetch will already have faulted in the necessary bytes for the full instruction
+ if (ret != 15) {
+ // I think we should inject a GPF into the guest
+ PrintError("Could not read instruction (ret=%d)\n", ret);
+ return -1;
+ }
+ */
if (v3_decode(info, (addr_t)instr, &dec_instr) == -1) {
PrintError("Could not decode instruction\n");
return -1;
}
- if (opcode_cmp(V3_OPCODE_MOV2CR, (const uchar_t *)(dec_instr.opcode)) == 0) {
+ if (v3_opcode_cmp(V3_OPCODE_MOV2CR, (const uchar_t *)(dec_instr.opcode)) == 0) {
PrintDebug("MOV2CR3\n");
- PrintDebug("CR3 at 0x%x\n", &(info->ctrl_regs.cr3));
+ PrintDebug("CR3 at 0x%p\n", &(info->ctrl_regs.cr3));
if (info->shdw_pg_mode == SHADOW_PAGING) {
- struct cr3_32 * new_cr3 = (struct cr3_32 *)(dec_instr.second_operand.operand);
+ struct cr3_32 * new_cr3 = (struct cr3_32 *)(dec_instr.src_operand.operand);
struct cr3_32 * guest_cr3 = (struct cr3_32 *)&(info->shdw_pg_state.guest_cr3);
struct cr3_32 * shadow_cr3 = (struct cr3_32 *)&(info->shdw_pg_state.shadow_cr3);
+ int cached = 0;
+
PrintDebug("Old Shadow CR3=%x; Old Guest CR3=%x\n",
*(uint_t*)shadow_cr3, *(uint_t*)guest_cr3);
- if (!CR3_32_SAME_BASE(new_cr3, guest_cr3)) {
- addr_t shadow_pt;
+
+ cached = v3_cache_page_tables32(info, (addr_t)V3_PAddr((void *)(addr_t)CR3_TO_PDE32((void *)*(addr_t *)new_cr3)));
+
+ if (cached == -1) {
+ PrintError("CR3 Cache failed\n");
+ return -1;
+ } else if (cached == 0) {
+ addr_t shadow_pt;
- PrintDebug("New CR3 is different - flushing shadow page table\n");
+ if( info->mem_mode == VIRTUAL_MEM )
+ {
+ PrintDebug("New CR3 is different - flushing shadow page table %p\n", shadow_cr3 );
- delete_page_tables_pde32((pde32_t *)CR3_TO_PDE32(*(uint_t*)shadow_cr3));
+ delete_page_tables_pde32((pde32_t *)CR3_TO_PDE32(*(uint_t*)shadow_cr3));
+ }
- shadow_pt = create_new_shadow_pt32(info);
+ shadow_pt = v3_create_new_shadow_pt32();
- shadow_cr3->pdt_base_addr = PD32_BASE_ADDR(shadow_pt);
- }
+ shadow_cr3->pdt_base_addr = (addr_t)V3_PAddr((void *)(addr_t)PD32_BASE_ADDR(shadow_pt));
+ PrintDebug( "Created new shadow page table %p\n", shadow_cr3->pdt_base_addr );
+ //PrintDebugPageTables( (pde32_t *)CR3_TO_PDE32(*(uint_t*)shadow_cr3) );
+
+
+ } else {
+ PrintDebug("Reusing cached shadow Page table\n");
+ }
+
shadow_cr3->pwt = new_cr3->pwt;
shadow_cr3->pcd = new_cr3->pcd;
// first attempt = 156 lines
// current = 36 lines
-int handle_cr3_read(struct guest_info * info) {
- char instr[15];
+int v3_handle_cr3_read(struct guest_info * info) {
+ uchar_t instr[15];
int ret;
struct x86_instr dec_instr;
ret = read_guest_va_memory(info, get_addr_linear(info, info->rip, &(info->segments.cs)), 15, instr);
}
- if (ret != 15) {
- // I think we should inject a GPF into the guest
- PrintError("Could not read instruction (ret=%d)\n", ret);
- return -1;
- }
+ /* The IFetch will already have faulted in the necessary bytes for the full instruction
+ if (ret != 15) {
+ // I think we should inject a GPF into the guest
+ PrintError("Could not read instruction (ret=%d)\n", ret);
+ return -1;
+ }
+ */
if (v3_decode(info, (addr_t)instr, &dec_instr) == -1) {
PrintError("Could not decode instruction\n");
return -1;
}
- if (opcode_cmp(V3_OPCODE_MOVCR2, (const uchar_t *)(dec_instr.opcode)) == 0) {
+ if (v3_opcode_cmp(V3_OPCODE_MOVCR2, (const uchar_t *)(dec_instr.opcode)) == 0) {
PrintDebug("MOVCR32\n");
- struct cr3_32 * virt_cr3 = (struct cr3_32 *)(dec_instr.first_operand.operand);
+ struct cr3_32 * virt_cr3 = (struct cr3_32 *)(dec_instr.dst_operand.operand);
- PrintDebug("CR3 at 0x%x\n", &(info->ctrl_regs.cr3));
+ PrintDebug("CR3 at 0x%p\n", &(info->ctrl_regs.cr3));
if (info->shdw_pg_mode == SHADOW_PAGING) {
*virt_cr3 = *(struct cr3_32 *)&(info->shdw_pg_state.guest_cr3);
return -1;
}
-
info->rip += dec_instr.instr_length;
return 0;