+/*
+ * This file is part of the Palacios Virtual Machine Monitor developed
+ * by the V3VEE Project with funding from the United States National
+ * Science Foundation and the Department of Energy.
+ *
+ * The V3VEE Project is a joint project between Northwestern University
+ * and the University of New Mexico. You can find out more at
+ * http://www.v3vee.org
+ *
+ * Copyright (c) 2008, Jack Lange <jarusl@cs.northwestern.edu>
+ * Copyright (c) 2008, The V3VEE Project <http://www.v3vee.org>
+ * All rights reserved.
+ *
+ * Author: Jack Lange <jarusl@cs.northwestern.edu>
+ *
+ * This is free software. You are permitted to use,
+ * redistribute, and modify it as specified in the file "V3VEE_LICENSE".
+ */
+
#include <palacios/svm_io.h>
#include <palacios/vmm_io.h>
#include <palacios/vmm_ctrl_regs.h>
-#include <palacios/vmm_emulate.h>
+#include <palacios/vmm_decoder.h>
#include <palacios/vm_guest_mem.h>
+#ifndef DEBUG_IO
+#undef PrintDebug
+#define PrintDebug(fmt, args...)
+#endif
-// This should package up an IO request and call vmm_handle_io
-int handle_svm_io_in(struct guest_info * info) {
- vmcb_ctrl_t * ctrl_area = GET_VMCB_CTRL_AREA((vmcb_t *)(info->vmm_data));
- // vmcb_saved_state_t * guest_state = GET_VMCB_SAVE_STATE_AREA((vmcb_t*)(info->vmm_data));
- struct svm_io_info * io_info = (struct svm_io_info *)&(ctrl_area->exit_info1);
- vmm_io_hook_t * hook = get_io_hook(&(info->io_map), io_info->port);
- uint_t read_size = 0;
- if (hook == NULL) {
- PrintDebug("Hook Not present for in on port %x\n", io_info->port);
- // error, we should not have exited on this port
- return -1;
- }
- PrintDebug("IN on port %d (0x%x)\n", io_info->port, io_info->port);
- if (io_info->sz8) {
- read_size = 1;
- } else if (io_info->sz16) {
- read_size = 2;
- } else if (io_info->sz32) {
- read_size = 4;
- }
+// This should package up an IO request and call vmm_handle_io
+int v3_handle_svm_io_in(struct guest_info * info) {
+ vmcb_ctrl_t * ctrl_area = GET_VMCB_CTRL_AREA((vmcb_t *)(info->vmm_data));
+ // vmcb_saved_state_t * guest_state = GET_VMCB_SAVE_STATE_AREA((vmcb_t*)(info->vmm_data));
+ struct svm_io_info * io_info = (struct svm_io_info *)&(ctrl_area->exit_info1);
+
+ struct v3_io_hook * hook = v3_get_io_hook(info, io_info->port);
+ int read_size = 0;
+
+ if (hook == NULL) {
+ PrintError("Hook Not present for in on port %x\n", io_info->port);
+ // error, we should not have exited on this port
+ return -1;
+ }
- if (hook->read(io_info->port, &(info->vm_regs.rax), read_size, hook->priv_data) != read_size) {
- // not sure how we handle errors.....
- PrintDebug("Read Failure for in on port %x\n", io_info->port);
- return -1;
- }
+ if (io_info->sz8) {
+ read_size = 1;
+ } else if (io_info->sz16) {
+ read_size = 2;
+ } else if (io_info->sz32) {
+ read_size = 4;
+ }
- info->rip = ctrl_area->exit_info2;
+ PrintDebug("IN of %d bytes on port %d (0x%x)\n", read_size, io_info->port, io_info->port);
- return 0;
+ if (hook->read(io_info->port, &(info->vm_regs.rax), read_size, hook->priv_data) != read_size) {
+ // not sure how we handle errors.....
+ PrintError("Read Failure for in on port %x\n", io_info->port);
+ return -1;
+ }
+
+ info->rip = ctrl_area->exit_info2;
+
+ return 0;
}
/* We might not handle wrap around of the RDI register correctly...
* In that if we do wrap around the effect will manifest in the higher bits of the register
*/
-int handle_svm_io_ins(struct guest_info * info) {
- vmcb_ctrl_t * ctrl_area = GET_VMCB_CTRL_AREA((vmcb_t *)(info->vmm_data));
- vmcb_saved_state_t * guest_state = GET_VMCB_SAVE_STATE_AREA((vmcb_t*)(info->vmm_data));
+int v3_handle_svm_io_ins(struct guest_info * info) {
+ vmcb_ctrl_t * ctrl_area = GET_VMCB_CTRL_AREA((vmcb_t *)(info->vmm_data));
+ vmcb_saved_state_t * guest_state = GET_VMCB_SAVE_STATE_AREA((vmcb_t*)(info->vmm_data));
- struct svm_io_info * io_info = (struct svm_io_info *)&(ctrl_area->exit_info1);
+ struct svm_io_info * io_info = (struct svm_io_info *)&(ctrl_area->exit_info1);
- vmm_io_hook_t * hook = get_io_hook(&(info->io_map), io_info->port);
- uint_t read_size = 0;
+ struct v3_io_hook * hook = v3_get_io_hook(info, io_info->port);
+ int read_size = 0;
+ addr_t dst_addr = 0;
+ uint_t rep_num = 1;
+ ullong_t mask = 0;
+ struct v3_segment * theseg = &(info->segments.es); // default is ES
+ addr_t inst_ptr;
+
+
+ // This is kind of hacky...
+ // direction can equal either 1 or -1
+ // We will multiply the final added offset by this value to go the correct direction
+ int direction = 1;
+ struct rflags * flags = (struct rflags *)&(guest_state->rflags);
+
+ if (flags->df) {
+ direction = -1;
+ }
- addr_t dst_addr = 0;
- uint_t rep_num = 1;
- ullong_t mask = 0;
+ if (hook == NULL) {
+ PrintError("Hook Not present for ins on port %x\n", io_info->port);
+ // error, we should not have exited on this port
+ return -1;
+ }
- // This is kind of hacky...
- // direction can equal either 1 or -1
- // We will multiply the final added offset by this value to go the correct direction
- int direction = 1;
- struct rflags * flags = (struct rflags *)&(guest_state->rflags);
- if (flags->df) {
- direction = -1;
- }
+ if (guest_va_to_host_va(info, get_addr_linear(info, info->rip, &(info->segments.cs)), &inst_ptr) == -1) {
+ PrintError("Can't access instruction\n");
+ return -1;
+ }
- if (hook == NULL) {
- PrintDebug("Hook Not present for ins on port %x\n", io_info->port);
- // error, we should not have exited on this port
- return -1;
- }
+ while (is_prefix_byte(*((char *)inst_ptr))) {
+ switch (*((char *)inst_ptr)) {
+ case PREFIX_CS_OVERRIDE:
+ theseg = &(info->segments.cs);
+ break;
+ case PREFIX_SS_OVERRIDE:
+ theseg = &(info->segments.ss);
+ break;
+ case PREFIX_DS_OVERRIDE:
+ theseg = &(info->segments.ds);
+ break;
+ case PREFIX_ES_OVERRIDE:
+ theseg = &(info->segments.es);
+ break;
+ case PREFIX_FS_OVERRIDE:
+ theseg = &(info->segments.fs);
+ break;
+ case PREFIX_GS_OVERRIDE:
+ theseg = &(info->segments.gs);
+ break;
+ default:
+ break;
+ }
+ inst_ptr++;
+ }
- PrintDebug("INS on port %d (0x%x)\n", io_info->port, io_info->port);
- if (io_info->sz8) {
- read_size = 1;
- } else if (io_info->sz16) {
- read_size = 2;
- } else if (io_info->sz32) {
- read_size = 4;
- } else {
- PrintDebug("io_info Invalid Size\n");
- return -1;
- }
+ PrintDebug("INS on port %d (0x%x)\n", io_info->port, io_info->port);
+
+ if (io_info->sz8) {
+ read_size = 1;
+ } else if (io_info->sz16) {
+ read_size = 2;
+ } else if (io_info->sz32) {
+ read_size = 4;
+ } else {
+ PrintError("io_info Invalid Size\n");
+ return -1;
+ }
- if (io_info->addr16) {
- mask = 0xffff;
- } else if (io_info->addr32) {
- mask = 0xffffffff;
- } else if (io_info->addr64) {
- mask = 0xffffffffffffffffLL;
- } else {
- // This value should be set depending on the host register size...
- mask = get_gpr_mask(info);
- }
-
- if (io_info->rep) {
- // rep_num = info->vm_regs.rcx & mask;
- rep_num = info->vm_regs.rcx;
- }
-
-
- PrintDebug("INS size=%d for %d steps\n", read_size, rep_num);
-
- while (rep_num > 0) {
- addr_t host_addr;
- dst_addr = get_addr_linear(info, info->vm_regs.rdi & mask, &(info->segments.es));
-
- if (guest_va_to_host_va(info, dst_addr, &host_addr) == -1) {
- // either page fault or gpf...
- PrintDebug("Could not convert Guest VA to host VA\n");
- return -1;
+ if (io_info->addr16) {
+ mask = 0xffff;
+ } else if (io_info->addr32) {
+ mask = 0xffffffff;
+ } else if (io_info->addr64) {
+ mask = 0xffffffffffffffffLL;
+ } else {
+ // This value should be set depending on the host register size...
+ mask = get_gpr_mask(info);
+
+ PrintDebug("INS io_info invalid address size, mask=0x%p, io_info=0x%p\n",
+ (void *)(addr_t)mask, (void *)(addr_t)(io_info));
+ // PrintDebug("INS Aborted... Check implementation\n");
+ //return -1;
}
- if (hook->read(io_info->port, (char*)host_addr, read_size, hook->priv_data) != read_size) {
- // not sure how we handle errors.....
- PrintDebug("Read Failure for ins on port %x\n", io_info->port);
- return -1;
+ if (io_info->rep) {
+ rep_num = info->vm_regs.rcx & mask;
+ //rep_num = info->vm_regs.rcx;
}
- info->vm_regs.rdi += read_size * direction;
- if (io_info->rep)
- info->vm_regs.rcx--;
+ PrintDebug("INS size=%d for %d steps\n", read_size, rep_num);
+
+ while (rep_num > 0) {
+ addr_t host_addr;
+ dst_addr = get_addr_linear(info, (info->vm_regs.rdi & mask), theseg);
- rep_num--;
- }
+ // PrintDebug("Writing 0x%p\n", (void *)dst_addr);
+
+ if (guest_va_to_host_va(info, dst_addr, &host_addr) == -1) {
+ // either page fault or gpf...
+ PrintError("Could not convert Guest VA to host VA\n");
+ return -1;
+ }
+
+ if (hook->read(io_info->port, (char *)host_addr, read_size, hook->priv_data) != read_size) {
+ // not sure how we handle errors.....
+ PrintError("Read Failure for ins on port %x\n", io_info->port);
+ return -1;
+ }
+ info->vm_regs.rdi += (read_size * direction);
- info->rip = ctrl_area->exit_info2;
+ if (io_info->rep) {
+ info->vm_regs.rcx--;
+ }
- return 0;
+ rep_num--;
+ }
+
+
+ info->rip = ctrl_area->exit_info2;
+
+ return 0;
}
-int handle_svm_io_out(struct guest_info * info) {
- vmcb_ctrl_t * ctrl_area = GET_VMCB_CTRL_AREA((vmcb_t *)(info->vmm_data));
- // vmcb_saved_state_t * guest_state = GET_VMCB_SAVE_STATE_AREA((vmcb_t*)(info->vmm_data));
- struct svm_io_info * io_info = (struct svm_io_info *)&(ctrl_area->exit_info1);
+int v3_handle_svm_io_out(struct guest_info * info) {
+ vmcb_ctrl_t * ctrl_area = GET_VMCB_CTRL_AREA((vmcb_t *)(info->vmm_data));
+ // vmcb_saved_state_t * guest_state = GET_VMCB_SAVE_STATE_AREA((vmcb_t*)(info->vmm_data));
+ struct svm_io_info * io_info = (struct svm_io_info *)&(ctrl_area->exit_info1);
- vmm_io_hook_t * hook = get_io_hook(&(info->io_map), io_info->port);
- uint_t write_size = 0;
+ struct v3_io_hook * hook = v3_get_io_hook(info, io_info->port);
+ int write_size = 0;
- if (hook == NULL) {
- PrintDebug("Hook Not present for out on port %x\n", io_info->port);
- // error, we should not have exited on this port
- return -1;
- }
+ if (hook == NULL) {
+ PrintError("Hook Not present for out on port %x\n", io_info->port);
+ // error, we should not have exited on this port
+ return -1;
+ }
- PrintDebug("OUT on port %d (0x%x)\n", io_info->port, io_info->port);
- if (io_info->sz8) {
- write_size = 1;
- } else if (io_info->sz16) {
- write_size = 2;
- } else if (io_info->sz32) {
- write_size = 4;
- }
+ if (io_info->sz8) {
+ write_size = 1;
+ } else if (io_info->sz16) {
+ write_size = 2;
+ } else if (io_info->sz32) {
+ write_size = 4;
+ }
+ PrintDebug("OUT of %d bytes on port %d (0x%x)\n", write_size, io_info->port, io_info->port);
- if (hook->write(io_info->port, &(info->vm_regs.rax), write_size, hook->priv_data) != write_size) {
- // not sure how we handle errors.....
- PrintDebug("Write Failure for out on port %x\n", io_info->port);
- return -1;
- }
+ if (hook->write(io_info->port, &(info->vm_regs.rax), write_size, hook->priv_data) != write_size) {
+ // not sure how we handle errors.....
+ PrintError("Write Failure for out on port %x\n", io_info->port);
+ return -1;
+ }
- info->rip = ctrl_area->exit_info2;
+ info->rip = ctrl_area->exit_info2;
- return 0;
+ return 0;
}
* In that if we do wrap around the effect will manifest in the higher bits of the register
*/
-int handle_svm_io_outs(struct guest_info * info) {
- vmcb_ctrl_t * ctrl_area = GET_VMCB_CTRL_AREA((vmcb_t *)(info->vmm_data));
- vmcb_saved_state_t * guest_state = GET_VMCB_SAVE_STATE_AREA((vmcb_t*)(info->vmm_data));
+int v3_handle_svm_io_outs(struct guest_info * info) {
+ vmcb_ctrl_t * ctrl_area = GET_VMCB_CTRL_AREA((vmcb_t *)(info->vmm_data));
+ vmcb_saved_state_t * guest_state = GET_VMCB_SAVE_STATE_AREA((vmcb_t*)(info->vmm_data));
+
- struct svm_io_info * io_info = (struct svm_io_info *)&(ctrl_area->exit_info1);
+ struct svm_io_info * io_info = (struct svm_io_info *)&(ctrl_area->exit_info1);
- vmm_io_hook_t * hook = get_io_hook(&(info->io_map), io_info->port);
- uint_t write_size = 0;
-
- addr_t dst_addr = 0;
- uint_t rep_num = 1;
- ullong_t mask = 0;
-
-
-
- // This is kind of hacky...
- // direction can equal either 1 or -1
- // We will multiply the final added offset by this value to go the correct direction
- int direction = 1;
- struct rflags * flags = (struct rflags *)&(guest_state->rflags);
- if (flags->df) {
- direction = -1;
- }
-
-
- if (hook == NULL) {
- PrintDebug("Hook Not present for outs on port %x\n", io_info->port);
- // error, we should not have exited on this port
- return -1;
- }
-
- PrintDebug("OUTS on port %d (0x%x)\n", io_info->port, io_info->port);
-
- if (io_info->sz8) {
- write_size = 1;
- } else if (io_info->sz16) {
- write_size = 2;
- } else if (io_info->sz32) {
- write_size = 4;
- }
-
-
- if (io_info->addr16) {
- mask = 0xffff;
- } else if (io_info->addr32) {
- mask = 0xffffffff;
- } else if (io_info->addr64) {
- mask = 0xffffffffffffffffLL;
- } else {
- // should never happen
- PrintDebug("Invalid Address length\n");
- return -1;
- }
-
- if (io_info->rep) {
- rep_num = info->vm_regs.rcx & mask;
- }
-
-
- while (rep_num > 0) {
- addr_t host_addr;
- dst_addr = get_addr_linear(info, (info->vm_regs.rsi & mask), &(info->segments.ds));
-
- if (guest_va_to_host_va(info, dst_addr, &host_addr) == -1) {
- // either page fault or gpf...
+ struct v3_io_hook * hook = v3_get_io_hook(info, io_info->port);
+ int write_size = 0;
+ addr_t dst_addr = 0;
+ uint_t rep_num = 1;
+ ullong_t mask = 0;
+ addr_t inst_ptr;
+ struct v3_segment * theseg = &(info->segments.es); // default is ES
+
+ // This is kind of hacky...
+ // direction can equal either 1 or -1
+ // We will multiply the final added offset by this value to go the correct direction
+ int direction = 1;
+ struct rflags * flags = (struct rflags *)&(guest_state->rflags);
+
+ if (flags->df) {
+ direction = -1;
}
- if (hook->write(io_info->port, (char*)host_addr, write_size, hook->priv_data) != write_size) {
- // not sure how we handle errors.....
- PrintDebug("Write Failure for outs on port %x\n", io_info->port);
- return -1;
+
+ if (hook == NULL) {
+ PrintError("Hook Not present for outs on port %x\n", io_info->port);
+ // error, we should not have exited on this port
+ return -1;
+ }
+
+ PrintDebug("OUTS on port %d (0x%x)\n", io_info->port, io_info->port);
+
+ if (io_info->sz8) {
+ write_size = 1;
+ } else if (io_info->sz16) {
+ write_size = 2;
+ } else if (io_info->sz32) {
+ write_size = 4;
}
- info->vm_regs.rsi += write_size * direction;
- if (io_info->rep)
- info->vm_regs.rcx--;
+ if (io_info->addr16) {
+ mask = 0xffff;
+ } else if (io_info->addr32) {
+ mask = 0xffffffff;
+ } else if (io_info->addr64) {
+ mask = 0xffffffffffffffffLL;
+ } else {
+ // This value should be set depending on the host register size...
+ mask = get_gpr_mask(info);
+
+ PrintDebug("OUTS io_info invalid address size, mask=0%p, io_info=0x%p\n",
+ (void *)(addr_t)mask, (void *)(addr_t)io_info);
+ // PrintDebug("INS Aborted... Check implementation\n");
+ //return -1;
+ // should never happen
+ //PrintDebug("Invalid Address length\n");
+ //return -1;
+ }
+
+ if (io_info->rep) {
+ rep_num = info->vm_regs.rcx & mask;
+ }
+
+
+
+
+ if (guest_va_to_host_va(info, get_addr_linear(info, info->rip, &(info->segments.cs)), &inst_ptr) == -1) {
+ PrintError("Can't access instruction\n");
+ return -1;
+ }
+
+ while (is_prefix_byte(*((char *)inst_ptr))) {
+ switch (*((char *)inst_ptr)) {
+ case PREFIX_CS_OVERRIDE:
+ theseg = &(info->segments.cs);
+ break;
+ case PREFIX_SS_OVERRIDE:
+ theseg = &(info->segments.ss);
+ break;
+ case PREFIX_DS_OVERRIDE:
+ theseg = &(info->segments.ds);
+ break;
+ case PREFIX_ES_OVERRIDE:
+ theseg = &(info->segments.es);
+ break;
+ case PREFIX_FS_OVERRIDE:
+ theseg = &(info->segments.fs);
+ break;
+ case PREFIX_GS_OVERRIDE:
+ theseg = &(info->segments.gs);
+ break;
+ default:
+ break;
+ }
+ inst_ptr++;
+ }
+
+ PrintDebug("OUTS size=%d for %d steps\n", write_size, rep_num);
+
+ while (rep_num > 0) {
+ addr_t host_addr;
+
+ dst_addr = get_addr_linear(info, (info->vm_regs.rsi & mask), theseg);
- rep_num--;
- }
+ if (guest_va_to_host_va(info, dst_addr, &host_addr) == -1) {
+ // either page fault or gpf...
+ }
+
+ if (hook->write(io_info->port, (char*)host_addr, write_size, hook->priv_data) != write_size) {
+ // not sure how we handle errors.....
+ PrintError("Write Failure for outs on port %x\n", io_info->port);
+ return -1;
+ }
+
+ info->vm_regs.rsi += write_size * direction;
+
+ if (io_info->rep) {
+ info->vm_regs.rcx--;
+ }
+
+ rep_num--;
+ }
- info->rip = ctrl_area->exit_info2;
+ info->rip = ctrl_area->exit_info2;
- return 0;
+ return 0;
}