* for multiple sector ops this equals mult_sector_num
* for standard ops this equals 1
*/
- uint32_t cur_sector_num;
+ uint64_t cur_sector_num;
};
struct ide_drive {
char model[41];
// Where we are in the data transfer
- uint32_t transfer_index;
+ uint64_t transfer_index;
// the length of a transfer
// calculated for easy access
- uint32_t transfer_length;
+ uint64_t transfer_length;
uint64_t current_lba;
uint32_t num_heads;
uint32_t num_sectors;
+
+ struct lba48_state {
+ // all start at zero
+ uint64_t lba;
+ uint16_t sector_count; // for LBA48
+ uint8_t sector_count_state; // two step write to 1f2/172 (high first)
+ uint8_t lba41_state; // two step write to 1f3
+ uint8_t lba52_state; // two step write to 1f4
+ uint8_t lba63_state; // two step write to 15
+ } lba48;
+
void * private_data;
union {
struct atapi_irq_flags irq_flags; // (ATAPI ONLY)
} __attribute__((packed));
+
union {
uint8_t sector_num; // 0x1f3,0x173
uint8_t lba0;
}
+static inline int is_lba28(struct ide_channel * channel) {
+ return channel->drive_head.lba_mode && channel->drive_head.rsvd1 && channel->drive_head.rsvd2;
+}
+
+static inline int is_lba48(struct ide_channel * channel) {
+ return channel->drive_head.lba_mode && !channel->drive_head.rsvd1 && !channel->drive_head.rsvd2;
+}
+
+static inline int is_chs(struct ide_channel * channel) {
+ return !channel->drive_head.lba_mode;
+}
+
static inline int get_channel_index(ushort_t port) {
if (((port & 0xfff8) == 0x1f0) ||
((port & 0xfffe) == 0x3f6) ||
}
-static inline int is_lba_enabled(struct ide_channel * channel) {
- return channel->drive_head.lba_mode;
-}
/* Drive Commands */
cmd_ret = v3_write_gpa_memory(core, prd_entry.base_addr + prd_offset,
bytes_to_write, drive->data_buf);
- // check cmd_ret
+ if (cmd_ret!=bytes_to_write) {
+ PrintError(core->vm_info, core, "Failed to write data to memory\n");
+ return -1;
+ }
+
bytes_to_write = 0;
if (atapi_cmd_is_data_op(drive->cd_state.atapi_cmd)) {
if (drive->transfer_index % ATAPI_BLOCK_SIZE) {
PrintError(core->vm_info, core, "We currently don't handle ATAPI BLOCKS that span PRD descriptors\n");
- PrintError(core->vm_info, core, "transfer_index=%d, transfer_length=%d\n",
+ PrintError(core->vm_info, core, "transfer_index=%llu, transfer_length=%llu\n",
drive->transfer_index, drive->transfer_length);
return -1;
}
if ((prd_entry.end_of_table == 1) && (bytes_left > 0)) {
PrintError(core->vm_info, core, "DMA table not large enough for data transfer...\n");
- PrintError(core->vm_info, core, "\t(bytes_left=%u) (transfer_length=%u)...\n",
+ PrintError(core->vm_info, core, "\t(bytes_left=%u) (transfer_length=%llu)...\n",
bytes_left, drive->transfer_length);
PrintError(core->vm_info, core, "PRD Addr: %x, PRD Len: %d, EOT: %d\n",
prd_entry.base_addr, prd_entry.size, prd_entry.end_of_table);
#define DMA_CHANNEL_FLAG 0x08
+/*
+ Note that DMA model is as follows:
+
+ 1. Write the PRD pointer to the busmaster (DMA engine)
+ 2. Start the transfer on the device
+ 3. Tell the busmaster to start shoveling data (active DMA)
+*/
+
static int write_dma_port(struct guest_info * core, ushort_t port, void * src, uint_t length, void * private_data) {
struct ide_internal * ide = (struct ide_internal *)private_data;
uint16_t port_offset = port & (DMA_CHANNEL_FLAG - 1);
switch (port_offset) {
case DMA_CMD_PORT:
channel->dma_cmd.val = *(uint8_t *)src;
+
+ PrintDebug(core->vm_info, core, "IDE: dma command write: 0x%x\n", channel->dma_cmd.val);
if (channel->dma_cmd.start == 0) {
channel->dma_tbl_index = 0;
} else {
+ // Launch DMA operation, interrupt at end
+
channel->dma_status.active = 1;
if (channel->dma_cmd.read == 1) {
- // DMA Read
+ // DMA Read the whole thing - dma_read will raise irq
if (dma_read(core, ide, channel) == -1) {
PrintError(core->vm_info, core, "Failed DMA Read\n");
return -1;
}
} else {
- // DMA write
+ // DMA write the whole thing - dma_write will raiase irw
if (dma_write(core, ide, channel) == -1) {
PrintError(core->vm_info, core, "Failed DMA Write\n");
return -1;
}
}
-
- channel->dma_cmd.val &= 0x09;
+
+ // DMA complete
+ // Note that guest cannot abort a DMA transfer
+ channel->dma_cmd.start = 0;
}
break;
case DMA_STATUS_PORT: {
+ // This is intended to clear status
+
uint8_t val = *(uint8_t *)src;
if (length != 1) {
- PrintError(core->vm_info, core, "Invalid read length for DMA status port\n");
+ PrintError(core->vm_info, core, "Invalid write length for DMA status port\n");
return -1;
}
- // weirdness
+ // but preserve certain bits
channel->dma_status.val = ((val & 0x60) |
(channel->dma_status.val & 0x01) |
(channel->dma_status.val & ~val & 0x06));
switch (channel->cmd_reg) {
- case ATA_PIDENTIFY: // ATAPI Identify Device Packet
+ case ATA_PIDENTIFY: // ATAPI Identify Device Packet (CDROM)
if (drive->drive_type != BLOCK_CDROM) {
drive_reset(drive);
ide_raise_irq(ide, channel);
}
break;
+
case ATA_IDENTIFY: // Identify Device
if (drive->drive_type != BLOCK_DISK) {
drive_reset(drive);
}
break;
- case ATA_PACKETCMD: // ATAPI Command Packet
+ case ATA_PACKETCMD: // ATAPI Command Packet (CDROM)
if (drive->drive_type != BLOCK_CDROM) {
ide_abort_command(ide, channel);
}
break;
- case ATA_READ: // Read Sectors with Retry
+ case ATA_READ: // Read Sectors with Retry
case ATA_READ_ONCE: // Read Sectors without Retry
- drive->hd_state.cur_sector_num = 1;
+ case ATA_MULTREAD: // Read multiple sectors per ire
+ case ATA_READ_EXT: // Read Sectors Extended (LBA48)
+
+ if (channel->cmd_reg==ATA_MULTREAD) {
+ drive->hd_state.cur_sector_num = drive->hd_state.mult_sector_num;
+ } else {
+ drive->hd_state.cur_sector_num = 1;
+ }
if (ata_read_sectors(ide, channel) == -1) {
PrintError(core->vm_info, core, "Error reading sectors\n");
}
break;
- case ATA_READ_EXT: // Read Sectors Extended
- drive->hd_state.cur_sector_num = 1;
+ case ATA_WRITE: // Write Sector with retry
+ case ATA_WRITE_ONCE: // Write Sector without retry
+ case ATA_MULTWRITE: // Write multiple sectors per irq
+ case ATA_WRITE_EXT: // Write Sectors Extended (LBA48)
- if (ata_read_sectors_ext(ide, channel) == -1) {
- PrintError(core->vm_info, core, "Error reading extended sectors\n");
- ide_abort_command(ide,channel);
-
+ if (channel->cmd_reg==ATA_MULTWRITE) {
+ drive->hd_state.cur_sector_num = drive->hd_state.mult_sector_num;
+ } else {
+ drive->hd_state.cur_sector_num = 1;
}
- break;
-
- case ATA_WRITE:
- case ATA_WRITE_ONCE: {// Write Sector
- drive->hd_state.cur_sector_num = 1;
if (ata_write_sectors(ide, channel) == -1) {
PrintError(core->vm_info, core, "Error writing sectors\n");
ide_abort_command(ide,channel);
}
break;
- }
- case ATA_READDMA: // Read DMA with retry
- case ATA_READDMA_ONCE: { // Read DMA
- uint32_t sect_cnt = (drive->sector_count == 0) ? 256 : drive->sector_count;
+ case ATA_READDMA: // Read DMA with retry
+ case ATA_READDMA_ONCE: // Read DMA without retry
+ case ATA_READDMA_EXT: { // Read DMA (LBA48)
+ uint64_t sect_cnt;
- if (ata_get_lba(ide, channel, &(drive->current_lba)) == -1) {
+ if (ata_get_lba_and_size(ide, channel, &(drive->current_lba), §_cnt) == -1) {
PrintError(core->vm_info, core, "Error getting LBA for DMA READ\n");
ide_abort_command(ide, channel);
return length;
}
- drive->hd_state.cur_sector_num = 1;
+ drive->hd_state.cur_sector_num = 1; // Not used for DMA
drive->transfer_length = sect_cnt * HD_SECTOR_SIZE;
drive->transfer_index = 0;
- if (channel->dma_status.active == 1) {
- // DMA Read
- if (dma_read(core, ide, channel) == -1) {
- PrintError(core->vm_info, core, "Failed DMA Read\n");
- ide_abort_command(ide, channel);
- }
- } else {
- PrintError(core->vm_info,core,"Attempt to initiate DMA read on channel that is not active\n");
- ide_abort_command(ide, channel);
- }
+ // Now we wait for the transfer to be intiated by flipping the
+ // bus-master start bit
break;
}
- case ATA_WRITEDMA: { // Write DMA
- uint32_t sect_cnt = (drive->sector_count == 0) ? 256 : drive->sector_count;
+ case ATA_WRITEDMA: // Write DMA with retry
+ case ATA_WRITEDMA_ONCE: // Write DMA without retry
+ case ATA_WRITEDMA_EXT: { // Write DMA (LBA48)
+
+ uint64_t sect_cnt;
- if (ata_get_lba(ide, channel, &(drive->current_lba)) == -1) {
+ if (ata_get_lba_and_size(ide, channel, &(drive->current_lba),§_cnt) == -1) {
PrintError(core->vm_info,core,"Cannot get lba\n");
ide_abort_command(ide, channel);
return length;
}
- drive->hd_state.cur_sector_num = 1;
+ drive->hd_state.cur_sector_num = 1; // Not used for DMA
drive->transfer_length = sect_cnt * HD_SECTOR_SIZE;
drive->transfer_index = 0;
- if (channel->dma_status.active == 1) {
- // DMA Write
- if (dma_write(core, ide, channel) == -1) {
- PrintError(core->vm_info, core, "Failed DMA Write\n");
- ide_abort_command(ide, channel);
- }
- } else {
- PrintError(core->vm_info,core,"Attempt to initiate DMA write with DMA inactive\n");
- ide_abort_command(ide, channel);
- }
+ // Now we wait for the transfer to be intiated by flipping the
+ // bus-master start bit
break;
}
+
case ATA_STANDBYNOW1: // Standby Now 1
case ATA_IDLEIMMEDIATE: // Set Idle Immediate
case ATA_STANDBY: // Standby
channel->status.seek_complete = 1;
ide_raise_irq(ide, channel);
break;
+
case ATA_SETMULT: { // Set multiple mode (IDE Block mode)
// This makes the drive transfer multiple sectors before generating an interrupt
- uint32_t tmp_sect_num = drive->sector_num; // GCC SUCKS
-
- if (tmp_sect_num > MAX_MULT_SECTORS) {
- ide_abort_command(ide, channel);
- break;
- }
if (drive->sector_count == 0) {
+ PrintError(core->vm_info,core,"Attempt to set multiple to zero\n");
drive->hd_state.mult_sector_num= 1;
+ ide_abort_command(ide,channel);
+ break;
} else {
drive->hd_state.mult_sector_num = drive->sector_count;
}
channel->status.data_req = 0;
channel->status.error = 0;
break;
- /*
- case ATA_MULTREAD: // read multiple sectors
- drive->hd_state.cur_sector_num = drive->hd_state.mult_sector_num;
- */
default:
PrintError(core->vm_info, core, "Unimplemented IDE command (%x)\n", channel->cmd_reg);
-static int read_hd_data(uint8_t * dst, uint_t length, struct ide_internal * ide, struct ide_channel * channel) {
+static int read_hd_data(uint8_t * dst, uint64_t length, struct ide_internal * ide, struct ide_channel * channel) {
struct ide_drive * drive = get_selected_drive(channel);
- int data_offset = drive->transfer_index % HD_SECTOR_SIZE;
+ uint64_t data_offset = drive->transfer_index % HD_SECTOR_SIZE;
- PrintDebug(VM_NONE,VCORE_NONE, "Read HD data: transfer_index %x transfer length %x current sector numer %x\n",
+ PrintDebug(VM_NONE,VCORE_NONE, "Read HD data: transfer_index %llu transfer length %llu current sector numer %llu\n",
drive->transfer_index, drive->transfer_length,
drive->hd_state.cur_sector_num);
- if (drive->transfer_index >= drive->transfer_length) {
- PrintError(VM_NONE, VCORE_NONE, "Buffer overrun... (xfer_len=%d) (cur_idx=%x) (post_idx=%d)\n",
+ if (drive->transfer_index >= drive->transfer_length && drive->transfer_index>=DATA_BUFFER_SIZE) {
+ PrintError(VM_NONE, VCORE_NONE, "Buffer overrun... (xfer_len=%llu) (cur_idx=%llu) (post_idx=%llu)\n",
drive->transfer_length, drive->transfer_index,
drive->transfer_index + length);
return -1;
if (data_offset + length > HD_SECTOR_SIZE) {
- PrintError(VM_NONE,VCORE_NONE,"Read spans sectors (data_offset=%d length=%u)!\n",data_offset,length);
+ PrintError(VM_NONE,VCORE_NONE,"Read spans sectors (data_offset=%llu length=%llu)!\n",data_offset,length);
}
// For index==0, the read has been done in ata_read_sectors
return length;
}
-static int write_hd_data(uint8_t * src, uint_t length, struct ide_internal * ide, struct ide_channel * channel) {
+static int write_hd_data(uint8_t * src, uint64_t length, struct ide_internal * ide, struct ide_channel * channel) {
struct ide_drive * drive = get_selected_drive(channel);
- int data_offset = drive->transfer_index % HD_SECTOR_SIZE;
+ uint64_t data_offset = drive->transfer_index % HD_SECTOR_SIZE;
- PrintDebug(VM_NONE,VCORE_NONE, "Write HD data: transfer_index %x transfer length %x current sector numer %x\n",
+ PrintDebug(VM_NONE,VCORE_NONE, "Write HD data: transfer_index %llu transfer length %llu current sector numer %llu\n",
drive->transfer_index, drive->transfer_length,
drive->hd_state.cur_sector_num);
if (drive->transfer_index >= drive->transfer_length) {
- PrintError(VM_NONE, VCORE_NONE, "Buffer overrun... (xfer_len=%d) (cur_idx=%x) (post_idx=%d)\n",
+ PrintError(VM_NONE, VCORE_NONE, "Buffer overrun... (xfer_len=%llu) (cur_idx=%llu) (post_idx=%llu)\n",
drive->transfer_length, drive->transfer_index,
drive->transfer_index + length);
return -1;
}
if (data_offset + length > HD_SECTOR_SIZE) {
- PrintError(VM_NONE,VCORE_NONE,"Write spans sectors (data_offset=%d length=%u)!\n",data_offset,length);
+ PrintError(VM_NONE,VCORE_NONE,"Write spans sectors (data_offset=%llu length=%llu)!\n",data_offset,length);
}
// Copy data into our buffer - there will be room due to
-static int read_cd_data(uint8_t * dst, uint_t length, struct ide_internal * ide, struct ide_channel * channel) {
+static int read_cd_data(uint8_t * dst, uint64_t length, struct ide_internal * ide, struct ide_channel * channel) {
struct ide_drive * drive = get_selected_drive(channel);
- int data_offset = drive->transfer_index % ATAPI_BLOCK_SIZE;
+ uint64_t data_offset = drive->transfer_index % ATAPI_BLOCK_SIZE;
// int req_offset = drive->transfer_index % drive->req_len;
if (drive->cd_state.atapi_cmd != 0x28) {
- PrintDebug(VM_NONE, VCORE_NONE, "IDE: Reading CD Data (len=%d) (req_len=%d)\n", length, drive->req_len);
- PrintDebug(VM_NONE, VCORE_NONE, "IDE: transfer len=%d, transfer idx=%d\n", drive->transfer_length, drive->transfer_index);
+ PrintDebug(VM_NONE, VCORE_NONE, "IDE: Reading CD Data (len=%llu) (req_len=%u)\n", length, drive->req_len);
+ PrintDebug(VM_NONE, VCORE_NONE, "IDE: transfer len=%llu, transfer idx=%llu\n", drive->transfer_length, drive->transfer_index);
}
- if (drive->transfer_index >= drive->transfer_length) {
- PrintError(VM_NONE, VCORE_NONE, "Buffer Overrun... (xfer_len=%d) (cur_idx=%d) (post_idx=%d)\n",
+ if (drive->transfer_index >= drive->transfer_length && drive->transfer_index>=DATA_BUFFER_SIZE) {
+ PrintError(VM_NONE, VCORE_NONE, "Buffer Overrun... (xfer_len=%llu) (cur_idx=%llu) (post_idx=%llu)\n",
drive->transfer_length, drive->transfer_index,
drive->transfer_index + length);
return -1;
case PRI_SECT_CNT_PORT:
case SEC_SECT_CNT_PORT:
+ // update CHS and LBA28 state
channel->drives[0].sector_count = *(uint8_t *)src;
channel->drives[1].sector_count = *(uint8_t *)src;
+
+ // update LBA48 state
+ if (is_lba48(channel)) {
+ uint16_t val = *(uint8_t*)src; // top bits zero;
+ if (!channel->drives[0].lba48.sector_count_state) {
+ channel->drives[0].lba48.sector_count = val<<8;
+ } else {
+ channel->drives[0].lba48.sector_count |= val;
+ }
+ channel->drives[0].lba48.sector_count_state ^= 1;
+ if (!channel->drives[1].lba48.sector_count_state) {
+ channel->drives[1].lba48.sector_count = val<<8;
+ } else {
+ channel->drives[1].lba48.sector_count |= val;
+ }
+ channel->drives[0].lba48.sector_count_state ^= 1;
+ }
+
break;
case PRI_SECT_NUM_PORT:
case SEC_SECT_NUM_PORT:
+ // update CHS and LBA28 state
channel->drives[0].sector_num = *(uint8_t *)src;
channel->drives[1].sector_num = *(uint8_t *)src;
+
+ // update LBA48 state
+ if (is_lba48(channel)) {
+ uint64_t val = *(uint8_t *)src; // lob off top 7 bytes;
+ if (!channel->drives[0].lba48.lba41_state) {
+ channel->drives[0].lba48.lba |= val<<24;
+ } else {
+ channel->drives[0].lba48.lba |= val;
+ }
+ channel->drives[0].lba48.lba41_state ^= 1;
+ if (!channel->drives[1].lba48.lba41_state) {
+ channel->drives[1].lba48.lba |= val<<24;
+ } else {
+ channel->drives[1].lba48.lba |= val;
+ }
+ channel->drives[1].lba48.lba41_state ^= 1;
+ }
+
break;
case PRI_CYL_LOW_PORT:
case SEC_CYL_LOW_PORT:
+ // update CHS and LBA28 state
channel->drives[0].cylinder_low = *(uint8_t *)src;
channel->drives[1].cylinder_low = *(uint8_t *)src;
+
+ // update LBA48 state
+ if (is_lba48(channel)) {
+ uint64_t val = *(uint8_t *)src; // lob off top 7 bytes;
+ if (!channel->drives[0].lba48.lba52_state) {
+ channel->drives[0].lba48.lba |= val<<32;
+ } else {
+ channel->drives[0].lba48.lba |= val<<8;
+ }
+ channel->drives[0].lba48.lba52_state ^= 1;
+ if (!channel->drives[1].lba48.lba52_state) {
+ channel->drives[1].lba48.lba |= val<<32;
+ } else {
+ channel->drives[1].lba48.lba |= val<<8;
+ }
+ channel->drives[1].lba48.lba52_state ^= 1;
+ }
+
break;
case PRI_CYL_HIGH_PORT:
case SEC_CYL_HIGH_PORT:
+ // update CHS and LBA28 state
channel->drives[0].cylinder_high = *(uint8_t *)src;
channel->drives[1].cylinder_high = *(uint8_t *)src;
+
+ // update LBA48 state
+ if (is_lba48(channel)) {
+ uint64_t val = *(uint8_t *)src; // lob off top 7 bytes;
+ if (!channel->drives[0].lba48.lba63_state) {
+ channel->drives[0].lba48.lba |= val<<40;
+ } else {
+ channel->drives[0].lba48.lba |= val<<16;
+ }
+ channel->drives[0].lba48.lba63_state ^= 1;
+ if (!channel->drives[1].lba48.lba63_state) {
+ channel->drives[1].lba48.lba |= val<<40;
+ } else {
+ channel->drives[1].lba48.lba |= val<<16;
+ }
+ channel->drives[1].lba48.lba63_state ^= 1;
+ }
+
break;
case PRI_DRV_SEL_PORT:
case SEC_DRV_SEL_PORT: {
- channel->drive_head.val = *(uint8_t *)src;
+ struct ide_drive_head_reg nh, oh;
+
+ oh.val = channel->drive_head.val;
+ channel->drive_head.val = nh.val = *(uint8_t *)src;
+
+ // has LBA flipped?
+ if ((oh.val & 0xe0) != (nh.val & 0xe0)) {
+ // reset LBA48 state
+ channel->drives[0].lba48.sector_count_state=0;
+ channel->drives[0].lba48.lba41_state=0;
+ channel->drives[0].lba48.lba52_state=0;
+ channel->drives[0].lba48.lba63_state=0;
+ channel->drives[1].lba48.sector_count_state=0;
+ channel->drives[1].lba48.lba41_state=0;
+ channel->drives[1].lba48.lba52_state=0;
+ channel->drives[1].lba48.lba63_state=0;
+ }
- // make sure the reserved bits are ok..
- // JRL TODO: check with new ramdisk to make sure this is right...
- channel->drive_head.val |= 0xa0;
drive = get_selected_drive(channel);
V3_CHKPT_SAVE(ctx, "PRD_ADDR", ch->dma_prd_addr, savefailout);
V3_CHKPT_SAVE(ctx, "DMA_TBL_IDX", ch->dma_tbl_index, savefailout);
+
+
v3_chkpt_close_ctx(ctx); ctx=0;
for (drive_num = 0; drive_num < 2; drive_num++) {
PrintError(VM_NONE, VCORE_NONE, "Invalid drive type %d\n",drive->drive_type);
goto savefailout;
}
+
+ V3_CHKPT_SAVE(ctx, "LBA48_LBA", drive->lba48.lba, savefailout);
+ V3_CHKPT_SAVE(ctx, "LBA48_SECTOR_COUNT", drive->lba48.sector_count, savefailout);
+ V3_CHKPT_SAVE(ctx, "LBA48_SECTOR_COUNT_STATE", drive->lba48.sector_count_state, savefailout);
+ V3_CHKPT_SAVE(ctx, "LBA48_LBA41_STATE", drive->lba48.lba41_state, savefailout);
+ V3_CHKPT_SAVE(ctx, "LBA48_LBA52_STATE", drive->lba48.lba52_state, savefailout);
+ V3_CHKPT_SAVE(ctx, "LBA48_LBA63_STATE", drive->lba48.lba63_state, savefailout);
v3_chkpt_close_ctx(ctx); ctx=0;
}
PrintError(VM_NONE, VCORE_NONE, "Invalid drive type %d\n",drive->drive_type);
goto loadfailout;
}
+
+ V3_CHKPT_LOAD(ctx, "LBA48_LBA", drive->lba48.lba, loadfailout);
+ V3_CHKPT_LOAD(ctx, "LBA48_SECTOR_COUNT", drive->lba48.sector_count, loadfailout);
+ V3_CHKPT_LOAD(ctx, "LBA48_SECTOR_COUNT_STATE", drive->lba48.sector_count_state, loadfailout);
+ V3_CHKPT_LOAD(ctx, "LBA48_LBA41_STATE", drive->lba48.lba41_state, loadfailout);
+ V3_CHKPT_LOAD(ctx, "LBA48_LBA52_STATE", drive->lba48.lba52_state, loadfailout);
+ V3_CHKPT_LOAD(ctx, "LBA48_LBA63_STATE", drive->lba48.lba63_state, loadfailout);
+
}
}
// goodout:
}
ide->southbridge = (struct v3_southbridge *)(southbridge->private_data);
+ } else {
+ PrintError(vm,VCORE_NONE,"Strange - you don't have a PCI bus\n");
}
PrintDebug(vm, VCORE_NONE, "IDE: Creating IDE bus x 2\n");
struct pci_device * pci_dev = NULL;
int i;
- PrintDebug(vm, VCORE_NONE, "Connecting IDE to PCI bus\n");
+ V3_Print(vm, VCORE_NONE, "Connecting IDE to PCI bus\n");
for (i = 0; i < 6; i++) {
bars[i].type = PCI_BAR_NONE;