#include <devices/ide.h>
#include <devices/pci.h>
#include <devices/southbridge.h>
+#include <devices/block_dev.h>
#include "ide-types.h"
#include "atapi-types.h"
}
-static const char * ide_dev_type_strs[] = {"NONE", "HARDDISK", "CDROM" };
-
-
-static inline const char * device_type_to_str(v3_ide_dev_type_t type) {
- if (type > 2) {
- return NULL;
- }
-
- return ide_dev_type_strs[type];
-}
-
-
struct ide_cd_state {
struct atapi_sense_data sense;
struct ide_drive {
// Command Registers
- v3_ide_dev_type_t drive_type;
+ v3_block_type_t drive_type;
union {
- struct v3_ide_cd_ops * cd_ops;
- struct v3_ide_hd_ops * hd_ops;
+ struct v3_cd_ops * cd_ops;
+ struct v3_hd_ops * hd_ops;
};
uint8_t data_buf[DATA_BUFFER_SIZE];
-
uint32_t num_cylinders;
uint32_t num_heads;
uint32_t num_sectors;
PrintDebug("Resetting drive %s\n", drive->model);
- if (drive->drive_type == IDE_CDROM) {
+ if (drive->drive_type == BLOCK_CDROM) {
drive->cylinder = 0xeb14;
} else {
drive->cylinder = 0x0000;
#include "ata.h"
+#ifdef DEBUG_IDE
+static void print_prd_table(struct vm_device * dev, struct ide_channel * channel) {
+ struct ide_dma_prd prd_entry;
+ int index = 0;
+
+ PrintDebug("Dumping PRD table\n");
+
+ while (1) {
+ uint32_t prd_entry_addr = channel->dma_prd_addr + (sizeof(struct ide_dma_prd) * index);
+ int ret;
+
+ ret = read_guest_pa_memory(dev->vm, prd_entry_addr, sizeof(struct ide_dma_prd), (void *)&prd_entry);
+
+ if (ret != sizeof(struct ide_dma_prd)) {
+ PrintError("Could not read PRD\n");
+ return;
+ }
+
+ PrintDebug("\tPRD Addr: %x, PRD Len: %d, EOT: %d\n",
+ prd_entry.base_addr, prd_entry.size, prd_entry.end_of_table);
+
+ if (prd_entry.end_of_table) {
+ break;
+ }
+
+ index++;
+ }
+
+ return;
+}
+#endif
/* IO Operations */
static int dma_read(struct vm_device * dev, struct ide_channel * channel) {
// Read in the data buffer....
// Read a sector/block at a time until the prd entry is full.
+#ifdef DEBUG_IDE
+ print_prd_table(dev, channel);
+#endif
PrintDebug("DMA read for %d bytes\n", bytes_left);
uint_t prd_bytes_left = 0;
uint_t prd_offset = 0;
int ret;
-
+
PrintDebug("PRD table address = %x\n", channel->dma_prd_addr);
-
+
ret = read_guest_pa_memory(dev->vm, prd_entry_addr, sizeof(struct ide_dma_prd), (void *)&prd_entry);
-
+
if (ret != sizeof(struct ide_dma_prd)) {
PrintError("Could not read PRD\n");
return -1;
}
-
+
PrintDebug("PRD Addr: %x, PRD Len: %d, EOT: %d\n",
prd_entry.base_addr, prd_entry.size, prd_entry.end_of_table);
-
+
// loop through the PRD data....
-
+
prd_bytes_left = prd_entry.size;
-
-
+
+
while (prd_bytes_left > 0) {
uint_t bytes_to_write = 0;
-
- if (drive->drive_type == IDE_DISK) {
- bytes_to_write = (prd_bytes_left > IDE_SECTOR_SIZE) ? IDE_SECTOR_SIZE : prd_bytes_left;
-
-
+
+ if (drive->drive_type == BLOCK_DISK) {
+ bytes_to_write = (prd_bytes_left > HD_SECTOR_SIZE) ? HD_SECTOR_SIZE : prd_bytes_left;
+
+
if (ata_read(dev, channel, drive->data_buf, 1) == -1) {
PrintError("Failed to read next disk sector\n");
return -1;
}
- } else if (drive->drive_type == IDE_CDROM) {
- bytes_to_write = (prd_bytes_left > ATAPI_BLOCK_SIZE) ? ATAPI_BLOCK_SIZE : prd_bytes_left;
-
- if (atapi_read_chunk(dev, channel) == -1) {
- PrintError("Failed to read next disk sector\n");
+ } else if (drive->drive_type == BLOCK_CDROM) {
+ if (atapi_cmd_is_data_op(drive->cd_state.atapi_cmd)) {
+ bytes_to_write = (prd_bytes_left > ATAPI_BLOCK_SIZE) ? ATAPI_BLOCK_SIZE : prd_bytes_left;
+
+ if (atapi_read_chunk(dev, channel) == -1) {
+ PrintError("Failed to read next disk sector\n");
+ return -1;
+ }
+ } else {
+ PrintDebug("DMA of command packet\n");
+ PrintError("How does this work???\n");
return -1;
+ bytes_to_write = (prd_bytes_left > bytes_left) ? bytes_left : prd_bytes_left;
+ prd_bytes_left = bytes_to_write;
}
}
-
+
PrintDebug("Writing DMA data to guest Memory ptr=%p, len=%d\n",
(void *)(addr_t)(prd_entry.base_addr + prd_offset), bytes_to_write);
drive->current_lba++;
-
+
ret = write_guest_pa_memory(dev->vm, prd_entry.base_addr + prd_offset, bytes_to_write, drive->data_buf);
-
+
if (ret != bytes_to_write) {
PrintError("Failed to copy data into guest memory... (ret=%d)\n", ret);
return -1;
}
PrintDebug("\t DMA ret=%d, (prd_bytes_left=%d) (bytes_left=%d)\n", ret, prd_bytes_left, bytes_left);
-
+
drive->transfer_index += ret;
prd_bytes_left -= ret;
prd_offset += ret;
bytes_left -= ret;
-
}
-
- channel->dma_tbl_index++;
-
- if (drive->drive_type == IDE_DISK) {
- if (drive->transfer_index % IDE_SECTOR_SIZE) {
+
+ channel->dma_tbl_index++;
+
+ if (drive->drive_type == BLOCK_DISK) {
+ if (drive->transfer_index % HD_SECTOR_SIZE) {
PrintError("We currently don't handle sectors that span PRD descriptors\n");
return -1;
}
- } else if (drive->drive_type == IDE_CDROM) {
- if (drive->transfer_index % ATAPI_BLOCK_SIZE) {
- PrintError("We currently don't handle ATAPI BLOCKS that span PRD descriptors\n");
- return -1;
+ } else if (drive->drive_type == BLOCK_CDROM) {
+ if (atapi_cmd_is_data_op(drive->cd_state.atapi_cmd)) {
+ if (drive->transfer_index % ATAPI_BLOCK_SIZE) {
+ PrintError("We currently don't handle ATAPI BLOCKS that span PRD descriptors\n");
+ PrintError("transfer_index=%d, transfer_length=%d\n",
+ drive->transfer_index, drive->transfer_length);
+ return -1;
+ }
}
}
-
-
+
+
if ((prd_entry.end_of_table == 1) && (bytes_left > 0)) {
PrintError("DMA table not large enough for data transfer...\n");
return -1;
uint_t bytes_to_write = 0;
- bytes_to_write = (prd_bytes_left > IDE_SECTOR_SIZE) ? IDE_SECTOR_SIZE : prd_bytes_left;
+ bytes_to_write = (prd_bytes_left > HD_SECTOR_SIZE) ? HD_SECTOR_SIZE : prd_bytes_left;
ret = read_guest_pa_memory(dev->vm, prd_entry.base_addr + prd_offset, bytes_to_write, drive->data_buf);
channel->dma_tbl_index++;
- if (drive->transfer_index % IDE_SECTOR_SIZE) {
+ if (drive->transfer_index % HD_SECTOR_SIZE) {
PrintError("We currently don't handle sectors that span PRD descriptors\n");
return -1;
}
switch (channel->cmd_reg) {
case 0xa1: // ATAPI Identify Device Packet
- if (drive->drive_type != IDE_CDROM) {
+ if (drive->drive_type != BLOCK_CDROM) {
drive_reset(drive);
// JRL: Should we abort here?
}
break;
case 0xec: // Identify Device
- if (drive->drive_type != IDE_DISK) {
+ if (drive->drive_type != BLOCK_DISK) {
drive_reset(drive);
// JRL: Should we abort here?
break;
case 0xa0: // ATAPI Command Packet
- if (drive->drive_type != IDE_CDROM) {
+ if (drive->drive_type != BLOCK_CDROM) {
ide_abort_command(dev, channel);
}
drive->hd_state.cur_sector_num = 1;
- drive->transfer_length = sect_cnt * IDE_SECTOR_SIZE;
+ drive->transfer_length = sect_cnt * HD_SECTOR_SIZE;
drive->transfer_index = 0;
if (channel->dma_status.active == 1) {
drive->hd_state.cur_sector_num = 1;
- drive->transfer_length = sect_cnt * IDE_SECTOR_SIZE;
+ drive->transfer_length = sect_cnt * HD_SECTOR_SIZE;
drive->transfer_index = 0;
if (channel->dma_status.active == 1) {
static int read_hd_data(uint8_t * dst, uint_t length, struct vm_device * dev, struct ide_channel * channel) {
struct ide_drive * drive = get_selected_drive(channel);
- int data_offset = drive->transfer_index % IDE_SECTOR_SIZE;
+ int data_offset = drive->transfer_index % HD_SECTOR_SIZE;
* cur_sector_num is configured depending on the operation we are currently running
* We also trigger an interrupt if this is the last byte to transfer, regardless of sector count
*/
- if (((drive->transfer_index % (IDE_SECTOR_SIZE * drive->hd_state.cur_sector_num)) == 0) ||
+ if (((drive->transfer_index % (HD_SECTOR_SIZE * drive->hd_state.cur_sector_num)) == 0) ||
(drive->transfer_index == drive->transfer_length)) {
if (drive->transfer_index < drive->transfer_length) {
// An increment is complete, but there is still more data to be transferred...
return read_drive_id((uint8_t *)dst, length, dev, channel);
}
- if (drive->drive_type == IDE_CDROM) {
+ if (drive->drive_type == BLOCK_CDROM) {
if (read_cd_data((uint8_t *)dst, length, dev, channel) == -1) {
PrintError("IDE: Could not read CD Data\n");
return -1;
}
- } else if (drive->drive_type == IDE_DISK) {
+ } else if (drive->drive_type == BLOCK_DISK) {
if (read_hd_data((uint8_t *)dst, length, dev, channel) == -1) {
PrintError("IDE: Could not read HD Data\n");
return -1;
drive = get_selected_drive(channel);
// Selecting a non-present device is a no-no
- if (drive->drive_type == IDE_NONE) {
+ if (drive->drive_type == BLOCK_NONE) {
PrintDebug("Attempting to select a non-present drive\n");
channel->error_reg.abort = 1;
channel->status.error = 1;
// if no drive is present just return 0 + reserved bits
- if (drive->drive_type == IDE_NONE) {
+ if (drive->drive_type == BLOCK_NONE) {
if ((port == PRI_DRV_SEL_PORT) ||
(port == SEC_DRV_SEL_PORT)) {
*(uint8_t *)dst = 0xa0;
drive->sector_num = 0x01;
drive->cylinder = 0x0000;
- drive->drive_type = IDE_NONE;
+ drive->drive_type = BLOCK_NONE;
memset(drive->model, 0, sizeof(drive->model));
-static int init_ide(struct vm_device * dev) {
- struct ide_internal * ide = (struct ide_internal *)(dev->private_data);
+static int ide_free(struct vm_device * dev) {
+ // unhook io ports....
+ // deregister from PCI?
+ return 0;
+}
+
+
+static struct v3_device_ops dev_ops = {
+ .free = ide_free,
+ .reset = NULL,
+ .start = NULL,
+ .stop = NULL,
+};
+
+
+
+static int ide_init(struct guest_info * vm, void * cfg_data) {
+ struct ide_internal * ide = (struct ide_internal *)V3_Malloc(sizeof(struct ide_internal));
+ struct ide_cfg * cfg = (struct ide_cfg *)(cfg_data);
+
PrintDebug("IDE: Initializing IDE\n");
+ memset(ide, 0, sizeof(struct ide_internal));
+
+
+ if (cfg->pci != NULL) {
+ if (cfg->southbridge == NULL) {
+ PrintError("PCI Enabled BUT southbridge is NULL\n");
+ return -1;
+ }
+
+ ide->pci_bus = v3_find_dev(vm, (char *)cfg->pci);
+
+ if (ide->pci_bus == NULL) {
+ PrintError("Could not find PCI device\n");
+ return -1;
+ }
+
+ struct vm_device * southbridge = v3_find_dev(vm, cfg->southbridge);
+
+ if (!southbridge) {
+ PrintError("Could not find southbridge\n");
+ return -1;
+ }
+
+ ide->southbridge = (struct v3_southbridge *)(southbridge->private_data);
+ }
+
+
+ PrintDebug("IDE: Creating IDE bus x 2\n");
+
+ struct vm_device * dev = v3_allocate_device("IDE", &dev_ops, ide);
+
+ if (v3_attach_device(vm, dev) == -1) {
+ PrintError("Could not attach device %s\n", "IDE");
+ return -1;
+ }
+
if (init_ide_state(dev) == -1) {
PrintError("Failed to initialize IDE state\n");
}
bars[4].type = PCI_BAR_IO;
- bars[4].default_base_port = PRI_DEFAULT_DMA_PORT;
+ // bars[4].default_base_port = PRI_DEFAULT_DMA_PORT;
+ bars[4].default_base_port = -1;
bars[4].num_ports = 16;
bars[4].io_read = read_dma_port;
pci_dev->config_header.device_id = 0x7010;
pci_dev->config_header.revision = 0x00;
- pci_dev->config_header.prog_if = 0x80;
- pci_dev->config_header.subclass = 0x01;
- pci_dev->config_header.class = 0x01;
+ pci_dev->config_header.prog_if = 0x80; // Master IDE device
+ pci_dev->config_header.subclass = PCI_STORAGE_SUBCLASS_IDE;
+ pci_dev->config_header.class = PCI_CLASS_STORAGE;
pci_dev->config_header.command = 0;
pci_dev->config_header.status = 0x0280;
}
-static int deinit_ide(struct vm_device * dev) {
- // unhook io ports....
- // deregister from PCI?
- return 0;
-}
-
-
-static struct vm_device_ops dev_ops = {
- .init = init_ide,
- .deinit = deinit_ide,
- .reset = NULL,
- .start = NULL,
- .stop = NULL,
-};
+device_register("IDE", ide_init)
-struct vm_device * v3_create_ide(struct vm_device * pci_bus, struct vm_device * southbridge_dev) {
- struct ide_internal * ide = (struct ide_internal *)V3_Malloc(sizeof(struct ide_internal));
- memset(ide, 0, sizeof(struct ide_internal));
- struct vm_device * device = v3_create_device("IDE", &dev_ops, ide);
- if (pci_bus != NULL) {
- if (southbridge_dev == NULL) {
- PrintError("PCI Enabled BUT southbridge is NULL\n");
- return NULL;
- }
-
- ide->pci_bus = pci_bus;
- ide->southbridge = (struct v3_southbridge *)(southbridge_dev->private_data);
- }
- PrintDebug("IDE: Creating IDE bus x 2\n");
-
- return device;
-}
-
int v3_ide_get_geometry(struct vm_device * ide_dev, int channel_num, int drive_num,
struct ide_channel * channel = &(ide->channels[channel_num]);
struct ide_drive * drive = &(channel->drives[drive_num]);
- if (drive->drive_type == IDE_NONE) {
+ if (drive->drive_type == BLOCK_NONE) {
return -1;
}
uint_t bus_num,
uint_t drive_num,
char * dev_name,
- struct v3_ide_cd_ops * ops,
+ struct v3_cd_ops * ops,
void * private_data) {
struct ide_internal * ide = (struct ide_internal *)(ide_dev->private_data);
channel = &(ide->channels[bus_num]);
drive = &(channel->drives[drive_num]);
- if (drive->drive_type != IDE_NONE) {
+ if (drive->drive_type != BLOCK_NONE) {
PrintError("Device slot (bus=%d, drive=%d) already occupied\n", bus_num, drive_num);
return -1;
}
}
- drive->drive_type = IDE_CDROM;
+ drive->drive_type = BLOCK_CDROM;
drive->cd_ops = ops;
uint_t bus_num,
uint_t drive_num,
char * dev_name,
- struct v3_ide_hd_ops * ops,
+ struct v3_hd_ops * ops,
void * private_data) {
struct ide_internal * ide = (struct ide_internal *)(ide_dev->private_data);
channel = &(ide->channels[bus_num]);
drive = &(channel->drives[drive_num]);
- if (drive->drive_type != IDE_NONE) {
+ if (drive->drive_type != BLOCK_NONE) {
PrintError("Device slot (bus=%d, drive=%d) already occupied\n", bus_num, drive_num);
return -1;
}
strncpy(drive->model, dev_name, sizeof(drive->model) - 1);
- drive->drive_type = IDE_DISK;
+ drive->drive_type = BLOCK_DISK;
drive->hd_state.accessed = 0;
drive->hd_state.mult_sector_num = 1;