+++ /dev/null
-/**
- * \defgroup uipopt Configuration options for uIP
- * @{
- *
- * uIP is configured using the per-project configuration file
- * uipopt.h. This file contains all compile-time options for uIP and
- * should be tweaked to match each specific project. The uIP
- * distribution contains a documented example "uipopt.h" that can be
- * copied and modified for each project.
- *
- * \note Most of the configuration options in the uipopt.h should not
- * be changed, but rather the per-project uip-conf.h file.
- */
-
-/**
- * \file
- * Configuration options for uIP.
- * \author Adam Dunkels <adam@dunkels.com>
- *
- * This file is used for tweaking various configuration options for
- * uIP. You should make a copy of this file into one of your project's
- * directories instead of editing this example "uipopt.h" file that
- * comes with the uIP distribution.
- */
-
-/*
- * Copyright (c) 2001-2003, Adam Dunkels.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. The name of the author may not be used to endorse or promote
- * products derived from this software without specific prior
- * written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
- * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
- * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * This file is part of the uIP TCP/IP stack.
- *
- * $Id: uipopt.h,v 1.3 2008/08/13 20:12:18 andrewlxia Exp $
- *
- */
-
-#ifndef __UIPOPT_H__
-#define __UIPOPT_H__
-
-#ifndef UIP_LITTLE_ENDIAN
-#define UIP_LITTLE_ENDIAN 3412
-#endif /* UIP_LITTLE_ENDIAN */
-#ifndef UIP_BIG_ENDIAN
-#define UIP_BIG_ENDIAN 1234
-#endif /* UIP_BIG_ENDIAN */
-
-#include <uip/uip-conf.h>
-
-/*------------------------------------------------------------------------------*/
-
-/**
- * \name Static configuration options
- * @{
- *
- * These configuration options can be used for setting the IP address
- * settings statically, but only if UIP_FIXEDADDR is set to 1. The
- * configuration options for a specific node includes IP address,
- * netmask and default router as well as the Ethernet address. The
- * netmask, default router and Ethernet address are appliciable only
- * if uIP should be run over Ethernet.
- *
- * All of these should be changed to suit your project.
-*/
-
-/**
- * Determines if uIP should use a fixed IP address or not.
- *
- * If uIP should use a fixed IP address, the settings are set in the
- * uipopt.h file. If not, the macros uip_sethostaddr(),
- * uip_setdraddr() and uip_setnetmask() should be used instead.
- *
- * \hideinitializer
- */
-#define UIP_FIXEDADDR 0
-
-/**
- * Ping IP address asignment.
- *
- * uIP uses a "ping" packets for setting its own IP address if this
- * option is set. If so, uIP will start with an empty IP address and
- * the destination IP address of the first incoming "ping" (ICMP echo)
- * packet will be used for setting the hosts IP address.
- *
- * \note This works only if UIP_FIXEDADDR is 0.
- *
- * \hideinitializer
- */
-#ifdef UIP_CONF_PINGADDRCONF
-#define UIP_PINGADDRCONF UIP_CONF_PINGADDRCONF
-#else /* UIP_CONF_PINGADDRCONF */
-#define UIP_PINGADDRCONF 0
-#endif /* UIP_CONF_PINGADDRCONF */
-
-
-/**
- * Specifies if the uIP ARP module should be compiled with a fixed
- * Ethernet MAC address or not.
- *
- * If this configuration option is 0, the macro uip_setethaddr() can
- * be used to specify the Ethernet address at run-time.
- *
- * \hideinitializer
- */
-#define UIP_FIXEDETHADDR 0
-
-/** @} */
-/*------------------------------------------------------------------------------*/
-/**
- * \name IP configuration options
- * @{
- *
- */
-/**
- * The IP TTL (time to live) of IP packets sent by uIP.
- *
- * This should normally not be changed.
- */
-#define UIP_TTL 64
-
-/**
- * Turn on support for IP packet reassembly.
- *
- * uIP supports reassembly of fragmented IP packets. This features
- * requires an additonal amount of RAM to hold the reassembly buffer
- * and the reassembly code size is approximately 700 bytes. The
- * reassembly buffer is of the same size as the uip_buf buffer
- * (configured by UIP_BUFSIZE).
- *
- * \note IP packet reassembly is not heavily tested.
- *
- * \hideinitializer
- */
-#define UIP_REASSEMBLY 0
-
-/**
- * The maximum time an IP fragment should wait in the reassembly
- * buffer before it is dropped.
- *
- */
-#define UIP_REASS_MAXAGE 40
-
-/** @} */
-
-/*------------------------------------------------------------------------------*/
-/**
- * \name UDP configuration options
- * @{
- */
-
-/**
- * Toggles wether UDP support should be compiled in or not.
- *
- * \hideinitializer
- */
-#ifdef UIP_CONF_UDP
-#define UIP_UDP UIP_CONF_UDP
-#else /* UIP_CONF_UDP */
-#define UIP_UDP 0
-#endif /* UIP_CONF_UDP */
-
-/**
- * Toggles if UDP checksums should be used or not.
- *
- * \note Support for UDP checksums is currently not included in uIP,
- * so this option has no function.
- *
- * \hideinitializer
- */
-#ifdef UIP_CONF_UDP_CHECKSUMS
-#define UIP_UDP_CHECKSUMS UIP_CONF_UDP_CHECKSUMS
-#else
-#define UIP_UDP_CHECKSUMS 0
-#endif
-
-/**
- * The maximum amount of concurrent UDP connections.
- *
- * \hideinitializer
- */
-#ifdef UIP_CONF_UDP_CONNS
-#define UIP_UDP_CONNS UIP_CONF_UDP_CONNS
-#else /* UIP_CONF_UDP_CONNS */
-#define UIP_UDP_CONNS 10
-#endif /* UIP_CONF_UDP_CONNS */
-
-/**
- * The name of the function that should be called when UDP datagrams arrive.
- *
- * \hideinitializer
- */
-
-
-/** @} */
-/*------------------------------------------------------------------------------*/
-/**
- * \name TCP configuration options
- * @{
- */
-
-/**
- * Determines if support for opening connections from uIP should be
- * compiled in.
- *
- * If the applications that are running on top of uIP for this project
- * do not need to open outgoing TCP connections, this configration
- * option can be turned off to reduce the code size of uIP.
- *
- * \hideinitializer
- */
-#define UIP_ACTIVE_OPEN 1
-
-/**
- * The maximum number of simultaneously open TCP connections.
- *
- * Since the TCP connections are statically allocated, turning this
- * configuration knob down results in less RAM used. Each TCP
- * connection requires approximatly 30 bytes of memory.
- *
- * \hideinitializer
- */
-#ifndef UIP_CONF_MAX_CONNECTIONS
-#define UIP_CONNS 10
-#else /* UIP_CONF_MAX_CONNECTIONS */
-#define UIP_CONNS UIP_CONF_MAX_CONNECTIONS
-#endif /* UIP_CONF_MAX_CONNECTIONS */
-
-
-/**
- * The maximum number of simultaneously listening TCP ports.
- *
- * Each listening TCP port requires 2 bytes of memory.
- *
- * \hideinitializer
- */
-#ifndef UIP_CONF_MAX_LISTENPORTS
-#define UIP_LISTENPORTS 20
-#else /* UIP_CONF_MAX_LISTENPORTS */
-#define UIP_LISTENPORTS UIP_CONF_MAX_LISTENPORTS
-#endif /* UIP_CONF_MAX_LISTENPORTS */
-
-/**
- * Determines if support for TCP urgent data notification should be
- * compiled in.
- *
- * Urgent data (out-of-band data) is a rarely used TCP feature that
- * very seldom would be required.
- *
- * \hideinitializer
- */
-#define UIP_URGDATA 0
-
-/**
- * The initial retransmission timeout counted in timer pulses.
- *
- * This should not be changed.
- */
-#define UIP_RTO 3
-
-/**
- * The maximum number of times a segment should be retransmitted
- * before the connection should be aborted.
- *
- * This should not be changed.
- */
-#define UIP_MAXRTX 8
-
-/**
- * The maximum number of times a SYN segment should be retransmitted
- * before a connection request should be deemed to have been
- * unsuccessful.
- *
- * This should not need to be changed.
- */
-#define UIP_MAXSYNRTX 5
-
-/**
- * The TCP maximum segment size.
- *
- * This is should not be to set to more than
- * UIP_BUFSIZE - UIP_LLH_LEN - UIP_TCPIP_HLEN.
- */
-#define UIP_TCP_MSS (UIP_BUFSIZE - UIP_LLH_LEN - UIP_TCPIP_HLEN)
-
-/**
- * The size of the advertised receiver's window.
- *
- * Should be set low (i.e., to the size of the uip_buf buffer) is the
- * application is slow to process incoming data, or high (32768 bytes)
- * if the application processes data quickly.
- *
- * \hideinitializer
- */
-#ifndef UIP_CONF_RECEIVE_WINDOW
-#define UIP_RECEIVE_WINDOW UIP_TCP_MSS
-#else
-#define UIP_RECEIVE_WINDOW UIP_CONF_RECEIVE_WINDOW
-#endif
-
-/**
- * How long a connection should stay in the TIME_WAIT state.
- *
- * This configiration option has no real implication, and it should be
- * left untouched.
- */
-#define UIP_TIME_WAIT_TIMEOUT 120
-
-
-/** @} */
-/*------------------------------------------------------------------------------*/
-/**
- * \name ARP configuration options
- * @{
- */
-
-/**
- * The size of the ARP table.
- *
- * This option should be set to a larger value if this uIP node will
- * have many connections from the local network.
- *
- * \hideinitializer
- */
-#ifdef UIP_CONF_ARPTAB_SIZE
-#define UIP_ARPTAB_SIZE UIP_CONF_ARPTAB_SIZE
-#else
-#define UIP_ARPTAB_SIZE 8
-#endif
-
-/**
- * The maxium age of ARP table entries measured in 10ths of seconds.
- *
- * An UIP_ARP_MAXAGE of 120 corresponds to 20 minutes (BSD
- * default).
- */
-#define UIP_ARP_MAXAGE 120
-
-/** @} */
-
-/*------------------------------------------------------------------------------*/
-
-/**
- * \name General configuration options
- * @{
- */
-
-/**
- * The size of the uIP packet buffer.
- *
- * The uIP packet buffer should not be smaller than 60 bytes, and does
- * not need to be larger than 1500 bytes. Lower size results in lower
- * TCP throughput, larger size results in higher TCP throughput.
- *
- * \hideinitializer
- */
-#ifndef UIP_CONF_BUFFER_SIZE
-#define UIP_BUFSIZE 400
-#else /* UIP_CONF_BUFFER_SIZE */
-#define UIP_BUFSIZE UIP_CONF_BUFFER_SIZE
-#endif /* UIP_CONF_BUFFER_SIZE */
-
-
-/**
- * Determines if statistics support should be compiled in.
- *
- * The statistics is useful for debugging and to show the user.
- *
- * \hideinitializer
- */
-#ifndef UIP_CONF_STATISTICS
-#define UIP_STATISTICS 0
-#else /* UIP_CONF_STATISTICS */
-#define UIP_STATISTICS UIP_CONF_STATISTICS
-#endif /* UIP_CONF_STATISTICS */
-
-/**
- * Determines if logging of certain events should be compiled in.
- *
- * This is useful mostly for debugging. The function uip_log()
- * must be implemented to suit the architecture of the project, if
- * logging is turned on.
- *
- * \hideinitializer
- */
-#ifndef UIP_CONF_LOGGING
-#define UIP_LOGGING 0
-#else /* UIP_CONF_LOGGING */
-#define UIP_LOGGING UIP_CONF_LOGGING
-#endif /* UIP_CONF_LOGGING */
-
-/**
- * Broadcast support.
- *
- * This flag configures IP broadcast support. This is useful only
- * together with UDP.
- *
- * \hideinitializer
- *
- */
-#ifndef UIP_CONF_BROADCAST
-#define UIP_BROADCAST 0
-#else /* UIP_CONF_BROADCAST */
-#define UIP_BROADCAST UIP_CONF_BROADCAST
-#endif /* UIP_CONF_BROADCAST */
-
-/**
- * Print out a uIP log message.
- *
- * This function must be implemented by the module that uses uIP, and
- * is called by uIP whenever a log message is generated.
- */
-extern void uip_log(char *msg); //you should replace this by your own log function
-
-/**
- * The link level header length.
- *
- * This is the offset into the uip_buf where the IP header can be
- * found. For Ethernet, this should be set to 14. For SLIP, this
- * should be set to 0.
- *
- * \hideinitializer
- */
-#ifdef UIP_CONF_LLH_LEN
-#define UIP_LLH_LEN UIP_CONF_LLH_LEN
-#else /* UIP_CONF_LLH_LEN */
-#define UIP_LLH_LEN 14
-#endif /* UIP_CONF_LLH_LEN */
-
-/** @} */
-/*------------------------------------------------------------------------------*/
-/**
- * \name CPU architecture configuration
- * @{
- *
- * The CPU architecture configuration is where the endianess of the
- * CPU on which uIP is to be run is specified. Most CPUs today are
- * little endian, and the most notable exception are the Motorolas
- * which are big endian. The BYTE_ORDER macro should be changed to
- * reflect the CPU architecture on which uIP is to be run.
- */
-
-/**
- * The byte order of the CPU architecture on which uIP is to be run.
- *
- * This option can be either BIG_ENDIAN (Motorola byte order) or
- * LITTLE_ENDIAN (Intel byte order).
- *
- * \hideinitializer
- */
-#ifdef UIP_CONF_BYTE_ORDER
-#define UIP_BYTE_ORDER UIP_CONF_BYTE_ORDER
-#else /* UIP_CONF_BYTE_ORDER */
-#define UIP_BYTE_ORDER UIP_LITTLE_ENDIAN
-#endif /* UIP_CONF_BYTE_ORDER */
-
-/** @} */
-/*------------------------------------------------------------------------------*/
-
-/**
- * \name Appication specific configurations
- * @{
- *
- * An uIP application is implemented using a single application
- * function that is called by uIP whenever a TCP/IP event occurs. The
- * name of this function must be registered with uIP at compile time
- * using the UIP_APPCALL definition.
- *
- * uIP applications can store the application state within the
- * uip_conn structure by specifying the type of the application
- * structure by typedef:ing the type uip_tcp_appstate_t and uip_udp_appstate_t.
- *
- * The file containing the definitions must be included in the
- * uipopt.h file.
- *
- * The following example illustrates how this can look.
- \code
-
-void httpd_appcall(void);
-#define UIP_APPCALL httpd_appcall
-
-struct httpd_state {
- u8_t state;
- u16_t count;
- char *dataptr;
- char *script;
-};
-typedef struct httpd_state uip_tcp_appstate_t
- \endcode
- */
-
-/**
- * \var #define UIP_APPCALL
- *
- * The name of the application function that uIP should call in
- * response to TCP/IP events.
- *
- */
-
-/**
- * \var typedef uip_tcp_appstate_t
- *
- * The type of the application state that is to be stored in the
- * uip_conn structure. This usually is typedef:ed to a struct holding
- * application state information.
- */
-
-/**
- * \var typedef uip_udp_appstate_t
- *
- * The type of the application state that is to be stored in the
- * uip_conn structure. This usually is typedef:ed to a struct holding
- * application state information.
- */
-/** @} */
-/** @} */
-
-#endif /* __UIPOPT_H__ */