# Makefile for GeekOS kernel, userspace, and tools
+#
+# Northwestern University
+# (c) 2008, Jack Lange <jarusl@cs.northwestern.edu>
+# (c) 2008, Peter Dinda <pdinda@northwestern.edu>
+# (c) 2008, Lei Xia <xiaxlei@gmail.com>
+# (c) 2008, The V3VEE Project <http://www.v3vee.org>
+#
+# Based on GeekOS Makefile:
# Copyright (c) 2004,2005 David H. Hovemeyer <daveho@cs.umd.edu>
-# $Revision: 1.11 $
+# $Revision: 1.71 $
+
# This is free software. You are permitted to use,
# redistribute, and modify it as specified in the file "COPYING".
# Required software to build GeekOS:
# - GNU Make (http://www.gnu.org/software/make)
# - gcc 2.95.2 generating code for target (i386/ELF) and host platforms
-# - nasm (http://nasm.sourceforge.net)
# - Perl5, AWK (any version), egrep
#
# Cygwin (http://cygwin.com) may be used to build GeekOS.
# to speed the build process on 2 processor systems.
-
-# THESE MUST MATCH WHAT IS DEFINED IN defs.h and defs.asm exactly
-# MUST BE INTEGRAL NUMBER OF PAGES
-TOP_OF_MEM := 0x30000000
-VM_SIZE := 0x20000000
-VM_START := 0x0
-
-#
-# THE KERNEL, SETUP, BOOTPACKAGE MUST BE SMALLER THAN THIS
-# MUST BE INTEGRAL NUMBER OF PAGES
-# define
-MAX_VMM := 0x160000
-
# Base address of kernel
#
# Note: at top of memory minus three pages (GDT/TSS/IDT)
#
# The setup code needs to copy it up to this address and jump there
#
-KERNEL_BASE_ADDR := $(shell perl -e 'print sprintf("0x%x",$(TOP_OF_MEM)-4096*3-$(MAX_VMM));')
-# Kernel entry point function
-KERNEL_ENTRY = $(SYM_PFX)Main
+
PROJECT_ROOT := ..
#when -DNDEBUG is set the kassert functions are disabled
#JRLDEBUG=-DNDEBUG
-JRLDEBUG= -DSERIAL_PRINT_DEBUG=1 -DSERIAL_PRINT_DEBUG_LEVEL=10 -DSERIAL_PRINT=1
-#
-#
-#Peter's compile flags
-PADFLAGS = -DMAX_VMM=$(MAX_VMM)
+# DEBUG=1 means VMM_DEBUG, VMM_INFO, and VMM_TRACE are enabled
+# as are SERIAL_PRINT_DEBUG
+#
-# Figure out if we're compiling with cygwin, http://cygwin.com
-SYSTEM_NAME := $(shell uname -s)
-ifeq ($(findstring CYGWIN,$(SYSTEM_NAME)),CYGWIN)
-SYM_PFX := _
-EXTRA_C_OPTS := -DNEED_UNDERSCORE -DGNU_WIN32
-EXTRA_NASM_OPTS := -DNEED_UNDERSCORE
-NON_ELF_SYSTEM := yes
-EXTRA_CC_USER_OPTS := -Dmain=geekos_main
+ifeq ($(LEAN_AND_MEAN),1)
+DEBUG := 0
+DEBUG_SECTIONS :=
+else
+DEBUG := 1
+DEBUG_SECTIONS :=
endif
-VMM_SIZES = ../include/geekos/vmm_sizes.h
+ifeq ($(DEBUG_ALL),1)
+ DEBUG_SECTIONS:= $(DEBUG_SECTIONS) -DDEBUG_SHADOW_PAGING -DDEBUG_CTRL_REGS -DDEBUG_INTERRUPTS -DDEBUG_KEYBOARD -DDEBUG_PIC -DDEBUG_PIT -DDEBUG_NVRAM -DDEBUG_EMULATOR -DDEBUG_XED -DDEBUG_HALT -DDEBUG_DEV_MGR
+# -DDEBUG_IO -DDEBUG_GENERIC -DDEBUG_RAMDISK
+endif
-# ----------------------------------------------------------------------
-# Configuration -
-# Various options specifying how GeekOS should be built,
-# what source files to build, which user programs to build,
-# etc. This is generally the only section of the makefile
-# that will need to be modified.
-# ----------------------------------------------------------------------
-# List of targets to build by default.
-# These targets encompass everything needed to boot
-# and run GeekOS.
-ALL_TARGETS := fd.img vm_kernel
+ifeq ($(DEBUG_SHADOW_PAGING),1)
+DEBUG_SECTIONS := $(DEBUG_SECTIONS) -DDEBUG_SHADOW_PAGING
+else
+ifeq ($(DEBUG_SHADOW_PAGING),0)
+DEBUG_SECTIONS := $(DEBUG_SECTIONS) -UDEBUG_SHADOW_PAGING
+endif
+endif
+
+ifeq ($(DEBUG_CTRL_REGS),1)
+DEBUG_SECTIONS := $(DEBUG_SECTIONS) -DDEBUG_CTRL_REGS
+else
+ifeq ($(DEBUG_CTRL_REGS),0)
+DEBUG_SECTIONS := $(DEBUG_SECTIONS) -UDEBUG_CTRL_REGS
+endif
+endif
+
+ifeq ($(DEBUG_INTERRUPTS),1)
+DEBUG_SECTIONS := $(DEBUG_SECTIONS) -DDEBUG_INTERRUPTS
+else
+ifeq ($(DEBUG_INTERRUPTS),0)
+DEBUG_SECTIONS := $(DEBUG_SECTIONS) -UDEBUG_INTERRUPTS
+endif
+endif
+
+ifeq ($(DEBUG_IO),1)
+DEBUG_SECTIONS := $(DEBUG_SECTIONS) -DDEBUG_IO
+else
+ifeq ($(DEBUG_IO),0)
+DEBUG_SECTIONS := $(DEBUG_SECTIONS) -UDEBUG_IO
+endif
+endif
+
+ifeq ($(DEBUG_KEYBOARD),1)
+DEBUG_SECTIONS := $(DEBUG_SECTIONS) -DDEBUG_KEYBOARD
+else
+ifeq ($(DEBUG_KEYBOARD),0)
+DEBUG_SECTIONS := $(DEBUG_SECTIONS) -UDEBUG_KEYBOARD
+endif
+endif
+
+ifeq ($(DEBUG_PIC),1)
+DEBUG_SECTIONS := $(DEBUG_SECTIONS) -DDEBUG_PIC
+else
+ifeq ($(DEBUG_PIC),0)
+DEBUG_SECTIONS := $(DEBUG_SECTIONS) -UDEBUG_PIC
+endif
+endif
+
+ifeq ($(DEBUG_PIT),1)
+DEBUG_SECTIONS := $(DEBUG_SECTIONS) -DDEBUG_PIT
+else
+ifeq ($(DEBUG_PIT),0)
+DEBUG_SECTIONS := $(DEBUG_SECTIONS) -UDEBUG_PIT
+endif
+endif
+
+ifeq ($(DEBUG_NVRAM),1)
+DEBUG_SECTIONS := $(DEBUG_SECTIONS) -DDEBUG_NVRAM
+else
+ifeq ($(DEBUG_NVRAM),0)
+DEBUG_SECTIONS := $(DEBUG_SECTIONS) -UDEBUG_NVRAM
+endif
+endif
+
+ifeq ($(DEBUG_GENERIC),1)
+DEBUG_SECTIONS := $(DEBUG_SECTIONS) -DDEBUG_GENERIC
+else
+ifeq ($(DEBUG_GENERIC),0)
+DEBUG_SECTIONS := $(DEBUG_SECTIONS) -UDEBUG_GENERIC
+endif
+endif
+
+ifeq ($(DEBUG_EMULATOR),1)
+DEBUG_SECTIONS := $(DEBUG_SECTIONS) -DDEBUG_EMULATOR
+else
+ifeq ($(DEBUG_EMULATOR),0)
+DEBUG_SECTIONS := $(DEBUG_SECTIONS) -UDEBUG_EMULATOR
+endif
+endif
+
+ifeq ($(DEBUG_RAMDISK),1)
+DEBUG_SECTIONS := $(DEBUG_SECTIONS) -DDEBUG_RAMDISK
+else
+ifeq ($(DEBUG_RAMDISK),0)
+DEBUG_SECTIONS := $(DEBUG_SECTIONS) -UDEBUG_RAMDISK
+endif
+endif
+
+ifeq ($(TRACE_RAMDISK),1)
+DEBUG_SECTIONS := $(DEBUG_SECTIONS) -DTRACE_RAMDISK
+else
+ifeq ($(TRACE_RAMDSK),0)
+DEBUG_SECTIONS := $(DEBUG_SECTIONS) -UTRACE_RAMDISK
+endif
+endif
+
+ifeq ($(DEBUG_XED),1)
+DEBUG_SECTIONS := $(DEBUG_SECTIONS) -DDEBUG_XED
+else
+ifeq ($(DEBUG_XED),0)
+DEBUG_SECTIONS := $(DEBUG_SECTIONS) -UDEBUG_XED
+endif
+endif
+ifeq ($(DEBUG_HALT),1)
+DEBUG_SECTIONS := $(DEBUG_SECTIONS) -DDEBUG_HALT
+else
+ifeq ($(DEBUG_HALT),0)
+DEBUG_SECTIONS := $(DEBUG_SECTIONS) -UDEBUG_HALT
+endif
+endif
-# Kernel source files
-KERNEL_C_SRCS := idt.c int.c trap.c irq.c io.c \
- blockdev.c ide.c \
- keyboard.c screen.c timer.c \
- mem.c crc32.c \
- gdt.c tss.c segment.c \
- bget.c malloc.c \
- synch.c kthread.c \
- serial.c reboot.c \
- paging.c vmx.c vmcs_gen.c vmcs.c\
- svm.c vmm.c vmm_util.c \
- debug.c\
- main.c
+ifeq ($(DEBUG_DEV_MGR),1)
+DEBUG_SECTIONS := $(DEBUG_SECTIONS) -DDEBUG_DEV_MGR
+else
+ifeq ($(DEBUG_DEV_MGR),0)
+DEBUG_SECTIONS := $(DEBUG_SECTIONS) -UDEBUG_DEV_MGR
+endif
+endif
-# Kernel object files built from C source files
-KERNEL_C_OBJS := $(KERNEL_C_SRCS:%.c=geekos/%.o)
+#DEBUG_SECTIONS := $(DEBUG_SECTIONS) -DTEST_NE2K
-# Kernel assembly files
-KERNEL_ASM_SRCS := lowlevel.asm vmx_lowlevel.asm svm_lowlevel.asm
+ifeq ($(DEBUG),1)
+ JRLDEBUG= -DVMM_DEBUG -DVMM_INFO -DVMM_TRACE $(DEBUG_SECTIONS)
+else
-KERNEL_GAS_SRCS := testvm.s
+endif
-# Kernel object files build from assembler source files
-KERNEL_ASM_OBJS := $(KERNEL_ASM_SRCS:%.asm=geekos/%.o)
-KERNEL_GAS_OBJS := $(KERNEL_GAS_SRCS:%.s=geekos/%.o)
-# All kernel object files
-KERNEL_OBJS := $(KERNEL_C_OBJS) \
- $(KERNEL_ASM_OBJS) $(KERNEL_GAS_OBJS)
-# Common library source files.
-# This library is linked into both the kernel and user programs.
-# It provides string functions and generic printf()-style
-# formatted output.
-COMMON_C_SRCS := fmtout.c string.c memmove.c
-# Common library object files.
-COMMON_C_OBJS := $(COMMON_C_SRCS:%.c=common/%.o)
+#
+# This is wrong for current cygwin - no changes needed
+#
+# Figure out if we're compiling with cygwin, http://cygwin.com
+#
+#
+#SYSTEM_NAME := $(shell uname -s)
+#ifeq ($(findstring CYGWIN,$(SYSTEM_NAME)),CYGWIN)
+#SYM_PFX := _
+#EXTRA_C_OPTS := -DNEED_UNDERSCORE -DGNU_WIN32
+#EXTRA_NASM_OPTS := -DNEED_UNDERSCORE
+#NON_ELF_SYSTEM := yes
+#EXTRA_CC_USER_OPTS := -Dmain=geekos_main
+#endif
+
+
+
+
+# ----------------------------------------------------------------------
+# Configuration -
+# Various options specifying how GeekOS should be built,
+# what source files to build, which user programs to build,
+# etc. This is generally the only section of the makefile
+# that will need to be modified.
+# ----------------------------------------------------------------------
+# List of targets to build by default.
+# These targets encompass everything needed to boot
+# and run GeekOS.
+ALL_TARGETS := vmm force_payload
+
+
+VMM_OBJS := \
+ palacios/vm_guest.o \
+ palacios/svm.o \
+ palacios/svm_handler.o \
+ palacios/vmm.o \
+ palacios/vmm_util.o \
+ palacios/vmm_ctrl_regs.o \
+ palacios/vmcb.o \
+ palacios/vmm_mem.o \
+ palacios/vmm_paging.o \
+ palacios/vmm_io.o \
+ palacios/vmm_debug.o \
+ palacios/svm_io.o \
+ palacios/vmm_intr.o \
+ palacios/vmm_time.o \
+ palacios/vmm_shadow_paging.o \
+ palacios/vm_guest_mem.o \
+ palacios/vm_dev.o \
+ palacios/vmm_dev_mgr.o \
+ palacios/vmm_decoder.o \
+ palacios/svm_halt.o \
+ palacios/svm_pause.o \
+ palacios/svm_wbinvd.o \
+ palacios/vmm_config.o \
+ palacios/vmm_hashtable.o \
+ palacios/vmm_string.o \
+ palacios/vmm_emulator.o \
+ palacios/vmm_queue.o \
+ palacios/vmm_host_events.o \
+ palacios/svm_lowlevel.o \
+ palacios/vmm_msr.o \
+ palacios/svm_msr.o \
+ palacios/vmm_socket.o \
+ palacios/vmm_xed.o \
+ palacios/vmm_rbtree.o \
+ palacios/vmm_profiler.o \
+
+# vmx.c vmcs_gen.c vmcs.c
+
+# Extra C flags for the VMM objects
+$(VMM_OBJS) :: EXTRA_CFLAGS = \
+ $(JRLDEBUG) \
+
+
+
+XED_OBJS := \
+ xed/v3-xed-compat.o \
+ xed/v3-udiv-compat.o \
+
+$(XED_OBJS) :: EXTRA_CFLAGS = \
+ $(JRLDEBUG) \
+
+DEVICES_OBJS := \
+ devices/generic.o \
+ devices/keyboard.o \
+ devices/nvram.o \
+ devices/timer.o \
+ devices/simple_pic.o \
+ devices/8259a.o \
+ devices/8254.o \
+ devices/serial.o \
+ devices/ramdisk.o \
+ devices/cdrom.o \
+ devices/bochs_debug.o \
+
+$(DEVICES_OBJS) :: EXTRA_CFLAGS = \
+ $(JRLDEBUG) \
# This section defines programs that are used to build GeekOS.
# ----------------------------------------------------------------------
+ifeq ($(ARCH),64)
+V3_ARCH := __V3_64BIT__
+else
+V3_ARCH := __V3_32BIT__
+endif
+
+
# Uncomment if cross compiling
-TARGET_CC_PREFIX := $(PROJECT_ROOT)/../devtools/i386/bin/i386-elf-
+#TARGET_CC_PREFIX := $(PROJECT_ROOT)/../devtools/i386/bin/i386-elf-
#TARGET_CC_PREFIX := i386-elf-
# Target C compiler. gcc 2.95.2 or later should work.
-TARGET_CC := $(TARGET_CC_PREFIX)gcc
+ifeq ($(ARCH),64)
+TARGET_CC := $(TARGET_CC_PREFIX)gcc -m64
+else
+TARGET_CC := $(TARGET_CC_PREFIX)gcc -m32
+endif
#TARGET_CC := $(TARGET_CC_PREFIX)gcc34 -m32
-# Host C compiler. This is used to compile programs to execute on
-# the host platform, not the target (x86) platform. On x86/ELF
-# systems, such as Linux and FreeBSD, it can generally be the same
-# as the target C compiler.
-HOST_CC := gcc
# Target linker. GNU ld is probably to only one that will work.
TARGET_LD := $(TARGET_CC_PREFIX)ld -melf_i386
NASM := $(PROJECT_ROOT)/../devtools/bin/nasm
#NASM := /opt/vmm-tools/bin/nasm
+CPP := cpp
+
+
+ifeq ($(ARCH),64)
+AS = as --64
+else
AS = as --32
+endif
+
# Tool to build PFAT filesystem images.
BUILDFAT := tools/builtFat.exe
NUMSECS := $(PERL) $(PROJECT_ROOT)/scripts/numsecs
+FD_SECTORS_PER_TRACK := $(PERL) $(PROJECT_ROOT)/scripts/numsecs_per_track
+
+
# ----------------------------------------------------------------------
# Definitions -
# Options passed to the tools.
# ----------------------------------------------------------------------
# Flags used for all C source files
-GENERAL_OPTS := -O -Wall $(EXTRA_C_OPTS) $(JRLDEBUG) $(PADFLAGS)
-CC_GENERAL_OPTS := $(GENERAL_OPTS) -Werror
-# Flags used for kernel C source files
-CC_KERNEL_OPTS := -g -DGEEKOS -I$(PROJECT_ROOT)/include
+CC_GENERAL_OPTS = \
+ -O \
+ -Wall \
+ -g \
+ -D__V3VEE__ \
+ -D$(V3_ARCH) \
+ $(EXTRA_C_OPTS) \
+ $(VMM_FLAGS) \
+ -I$(PROJECT_ROOT)/include \
+ -Werror \
+ -fPIC \
+ -Wp,-MD,$(@D)/.$(@F).d \
+ -Wp,-MT,$@ \
+
+#-fPIC \
+#-fvisibility=hidden
-# Flags user for kernel assembly files
-NASM_KERNEL_OPTS := -I$(PROJECT_ROOT)/src/geekos/ -f elf $(EXTRA_NASM_OPTS)
-# Flags used for common library and libc source files
-CC_USER_OPTS := -I$(PROJECT_ROOT)/include -I$(PROJECT_ROOT)/include/libc \
- $(EXTRA_CC_USER_OPTS)
# Flags passed to objcopy program (strip unnecessary sections from kernel.exe)
OBJCOPY_FLAGS := -R .dynamic -R .note -R .comment
# ----------------------------------------------------------------------
# Compilation of kernel C source files
+# Usage:
+# $(call build,TAG,commandline)
+#
+# If V=1 on the command line or the environment, then the actual
+# command executed will be echoed to the terminal. Otherwise
+# only the tag and the output file will be printed to make
+# any warnings stand out from the compile messages.
+#
+build = \
+ @if [ -z "$V" ]; then \
+ echo ' [$1] $@'; \
+ $2; \
+ else \
+ echo '$2'; \
+ $2; \
+ fi
+
+
+
+CC_COMPILE = \
+ $(call build,CC,$(TARGET_CC) \
+ $(CC_GENERAL_OPTS) \
+ $(EXTRA_CFLAGS) \
+ -c \
+ $< \
+ -o $@ \
+ )
+
+AS_COMPILE = \
+ $(call build,AS,$(TARGET_CC) \
+ $(CC_GENERAL_OPTS) \
+ $(EXTRA_CFLAGS) \
+ -c \
+ $< \
+ -o $@ \
+ )
+
+
+%.o: %.c
+ $(CC_COMPILE)
+%.o: %.S
+ $(AS_COMPILE)
+%.o: %.s
+ $(AS_COMPILE)
-geekos/%.o : geekos/%.c
- $(TARGET_CC) -c $(CC_GENERAL_OPTS) $(CC_KERNEL_OPTS) $< -o geekos/$*.o
-
-
-# Compilation of kernel assembly source files
-geekos/%.o : geekos/%.asm
- $(NASM) $(NASM_KERNEL_OPTS) $< -o geekos/$*.o
-
-# Compilation of test VM
-geekos/%.o : geekos/%.s
- $(AS) $< -o geekos/$*.o
-
-geekos/%.o : geekos/%.S
- $(TARGET_CC) -c $(CC_GENERAL_OPTS) $(CC_KERNEL_OPTS) $< -o geekos/$*.o
-
-# Compilation of common library C source files
-common/%.o : common/%.c
- $(TARGET_CC) -c $(CC_GENERAL_OPTS) $(CC_USER_OPTS) $< -o common/$*.o
# ----------------------------------------------------------------------
# Targets -
all : $(ALL_TARGETS)
-geekos/vmx_lowlevel.o: $(PROJECT_ROOT)/src/geekos/vmx_lowlevel.asm
- $(NASM) -O99 \
- -f elf \
- -I$(PROJECT_ROOT)/src/geekos/ \
- $(PROJECT_ROOT)/src/geekos/vmx_lowlevel.asm \
- -o $@
-
-
-geekos/test: geekos/test.o geekos/vmcs.o geekos/vmx_lowlevel.o
- $(CC) geekos/test.o geekos/vmcs.o geekos/vmx_lowlevel.o -o geekos/test
-
-# Standard floppy image - just boots the kernel
-fd.img : geekos/fd_boot.bin geekos/setup.bin geekos/kernel.bin vm_kernel
- cat geekos/fd_boot.bin geekos/setup.bin geekos/kernel.bin > _temp
- $(PAD) _temp 512
- cat _temp vm_kernel > $@
-
-# make ready to boot over PXE
-pxe: fd.img
- cp fd.img /tftpboot/vmm.img
- $(PAD) /tftpboot/vmm.img 1474560
-
-
-pxe-discovery-pdinda: fd.img
- cp fd.img geekos.img
- $(PAD) geekos.img 1474560
- /usr/local/vmm-util/pxe_cp geekos.img
- /usr/local/vmm-util/tty_perm pdinda
- echo "Copied file to PXE boot area and set serial permissions for pdinda"
-
-
-pxe-discovery-bjp600: fd.img
- cp fd.img geekos.img
- $(PAD) geekos.img 1474560
- /usr/local/vmm-util/pxe_cp geekos.img
- /usr/local/vmm-util/tty_perm bjp600
- echo "Copied file to PXE boot area and set serial permissions for pdinda"
-
-
-# Floppy boot sector (first stage boot loader).
-geekos/fd_boot.bin : geekos/setup.bin geekos/kernel.bin $(PROJECT_ROOT)/src/geekos/fd_boot.asm vm_kernel
- $(NASM) -f bin \
- -I$(PROJECT_ROOT)/src/geekos/ \
- -DNUM_SETUP_SECTORS=`$(NUMSECS) geekos/setup.bin` \
- -DNUM_KERN_SECTORS=`$(NUMSECS) geekos/kernel.bin` \
- -DNUM_VM_KERNEL_SECTORS=`$(NUMSECS) vm_kernel` \
- $(PROJECT_ROOT)/src/geekos/fd_boot.asm \
- -o $@
-
-# Setup program (second stage boot loader).
-geekos/setup.bin : geekos/kernel.exe $(PROJECT_ROOT)/src/geekos/setup.asm
- $(NASM) -f bin \
- -I$(PROJECT_ROOT)/src/geekos/ \
- -DENTRY_POINT=0x`egrep 'Main$$' geekos/kernel.syms |awk '{print $$1}'` \
- -DVMM_FINAL_ADDR=$(KERNEL_BASE_ADDR) \
- -DVMM_SIZE=$(MAX_VMM) \
- $(PROJECT_ROOT)/src/geekos/setup.asm \
- -o $@
- $(PAD) $@ 512
+#geekos/vmx_lowlevel.o: $(PROJECT_ROOT)/src/geekos/vmx_lowlevel.asm
+# $(NASM) -O99 \
+# -f elf \
+# -I$(PROJECT_ROOT)/src/geekos/ \
+# $(PROJECT_ROOT)/src/geekos/vmx_lowlevel.asm \
+# -o $@
-# Loadable (flat) kernel image.
-geekos/kernel.bin : geekos/kernel.exe
- $(TARGET_OBJCOPY) $(OBJCOPY_FLAGS) -S -O binary geekos/kernel.exe geekos/kernel.bin
- $(PAD) $@ 512
-# The kernel executable and symbol map.
-geekos/kernel.exe : $(KERNEL_OBJS) $(COMMON_C_OBJS)
- $(TARGET_LD) -o geekos/kernel.exe -Ttext $(KERNEL_BASE_ADDR) -e $(KERNEL_ENTRY) \
- $(KERNEL_OBJS) $(COMMON_C_OBJS)
- $(TARGET_NM) geekos/kernel.exe > geekos/kernel.syms
+#geekos/test: geekos/test.o geekos/vmcs.o geekos/vmx_lowlevel.o
+# $(CC) geekos/test.o geekos/vmcs.o geekos/vmx_lowlevel.o -o geekos/test
+
-generate_sizes: force
- echo "#ifndef __vmm_sizes" > $(VMM_SIZES)
- echo "#define __vmm_sizes" >> $(VMM_SIZES)
- echo "#define KERNEL_LOAD_ADDRESS " $(KERNEL_BASE_ADDR) >> $(VMM_SIZES)
+rombios_link:
+ ln -s -f ../src/vmboot/rombios/BIOS-bochs-latest rombios
- echo "#define KERNEL_START (KERNEL_LOAD_ADDRESS)" >> $(VMM_SIZES)
- echo "#define KERNEL_CORE_LENGTH (" `$(NUMSECS) geekos/kernel.bin` "*512)" >> $(VMM_SIZES)
- echo "#define KERNEL_END (KERNEL_LOAD_ADDRESS+KERNEL_CORE_LENGTH-1)" >> $(VMM_SIZES)
+vgabios_link:
+ ln -s -f ../src/vmboot/vgabios/VGABIOS-lgpl-latest.bin vgabios
- echo "#define VM_KERNEL_LENGTH (" `$(NUMSECS) vm_kernel` "*512)" >> $(VMM_SIZES)
- echo "#define VM_KERNEL_START (KERNEL_LOAD_ADDRESS + KERNEL_CORE_LENGTH)" >> $(VMM_SIZES)
- echo "#define VM_BOOT_PACKAGE_START (VM_KERNEL_START) " >> $(VMM_SIZES)
- echo "#define VM_BOOT_PACKAGE_END (VM_KERNEL_START+VM_KERNEL_LENGTH-1) " >> $(VMM_SIZES)
- echo "#endif" >> $(VMM_SIZES)
-make_show_sizes: generate_sizes ../src/geekos/show_sizes.c
- $(HOST_CC) -I../include/geekos ../src/geekos/show_sizes.c -o show_sizes
+force_rombios: rombios_link
+ (cd ../src/vmboot/rombios; make clean; make)
-show_sizes: make_show_sizes
- ./show_sizes
+force_vgabios: vgabios_link
+ (cd ../src/vmboot/vgabios; make clean; make)
+force_payload: force_rombios force_vgabios
+ ../scripts/make_payload.pl payload_layout.txt vm_kernel
-get_kernel_size: make_show_sizes
- ./show_sizes | grep
+inter1: force_payload
+ -make clean
+
+world: inter1 vmm
+
+vmm: palacios/vmm.lib
+
+
+
+
+# Loadable (flat) kernel image.
+palacios/vmm.bin : palacios/vmm.lib
+ $(TARGET_OBJCOPY) $(OBJCOPY_FLAGS) -S -O binary palacios/vmm.lib palacios/vmm.bin
+
+
+# The kernel executable and symbol map.
+palacios/vmm.lib: libv3vee.a
+libv3vee.a: \
+ $(VMM_OBJS) \
+ $(DEVICES_OBJS) \
+ $(XED_OBJS) \
+
+ $(call build,AR,$(TARGET_AR) rcs $@ $^)
force:
-vm_kernel: force
- $(PAD) vm_kernel 512
- @echo "VM kernel lives at 0x100000 and is" `$(NUMSECS) vm_kernel` "sectors long"
+
# Clean build directories of generated files
clean :
- for d in geekos common libc user tools; do \
- (cd $$d && rm -f *); \
+ for d in palacios devices xed; do \
+ (cd $$d && rm -f * .*.d); \
done
-# Build header file dependencies, so source files are recompiled when
-# header files they depend on are modified.
-depend : $(GENERATED_LIBC_SRCS)
- $(TARGET_CC) -M $(CC_GENERAL_OPTS) $(CC_KERNEL_OPTS) \
- $(KERNEL_C_SRCS:%.c=$(PROJECT_ROOT)/src/geekos/%.c) \
- | $(PERL) -n -e 's,^(\S),geekos/$$1,;print' \
- > depend.mak
- $(TARGET_CC) -M $(CC_GENERAL_OPTS) $(CC_USER_OPTS) \
- $(COMMON_C_SRCS:%.c=$(PROJECT_ROOT)/src/common/%.c) \
- | $(PERL) -n -e 's,^(\S),common/$$1,;print' \
- >> depend.mak
-
-# By default, there are no header file dependencies.
-depend.mak :
- touch $@
-
-include depend.mak
+# Include all of the generated dependency files if they exist
+-include */.*.o.d