--- /dev/null
+diff -rupN x11-original/build/bin/xorg.conf x11-new/build/bin/xorg.conf
+--- x11-original/build/bin/xorg.conf 1969-12-31 18:00:00.000000000 -0600
++++ x11-new/build/bin/xorg.conf 2013-06-07 17:07:35.000000000 -0500
+@@ -0,0 +1,40 @@
++Section "Monitor"
++Identifier "Monitor0"
++HorizSync 28.0-80.0
++VertRefresh 48.0-75.0
++#Modeline "1280x800" 83.46 1280 1344 1480 1680 800 801 804 828 -HSync +Vsync
++# 1224x685 @ 60.00 Hz (GTF) hsync: 42.54 kHz; pclk: 67.72 MHz
++#Modeline "800x600" 67.72 800 848 936 1072 600 601 604 636 -HSync +Vsync
++Modeline "1024x1024" 67.72 1024 1072 1160 1296 1024 1072 1160 1296 -HSync +Vsync
++EndSection
++
++Section "Device"
++Identifier "Card0"
++Option "NoDDC" "true"
++Option "IgnoreEDID" "true"
++Driver "dummy"
++EndSection
++
++Section "Screen"
++DefaultDepth 24
++Identifier "Screen0"
++Device "Card0"
++Monitor "Monitor0"
++ SubSection "Display"
++ Depth 24
++ Virtual 1024 1024
++ Modes "1024x1024"
++ EndSubSection
++EndSection
++
++
++Section "InputClass"
++ Identifier "system-setup-keyboard"
++ MatchIsKeyboard "on"
++ Option "XkbModel" "pc105+inet"
++ Option "XkbLayout" "us"
++# Option "XkbVariant" "(null)"
++ Option "XkbOptions" "terminate:ctrl_alt_bksp,"
++EndSection
++
++
+diff -rupN x11-original/src/driver/xf86-video-dummy/src/dummy_driver.c x11-new/src/driver/xf86-video-dummy/src/dummy_driver.c
+--- x11-original/src/driver/xf86-video-dummy/src/dummy_driver.c 2013-06-07 14:51:15.000000000 -0500
++++ x11-new/src/driver/xf86-video-dummy/src/dummy_driver.c 2013-06-07 17:07:20.000000000 -0500
+@@ -551,9 +551,32 @@
+ dPtr = DUMMYPTR(pScrn);
+ DUMMYScrn = pScrn;
+
+- if (!(dPtr->FBBase = malloc(pScrn->videoRam * 1024)))
+- return FALSE;
++ int fd = open("/dev/mem", O_RDWR | O_SYNC);
+
++ if (fd<0) {
++ perror("Cannot open /dev/mem");
++ return -1;
++ }
++ xf86DrvMsg(pScrn->scrnIndex, X_INFO, "This is Ruba's driver \n");
++
++ unsigned char *mem = mmap(NULL, PARAGRAPH_LEN, PROT_READ | PROT_WRITE, MAP_SHARED, fd, PARAGRAPH_PADDR);
++
++ if (mem == MAP_FAILED) {
++ perror("Can't map memory");
++ return -1;
++ } else {
++ printf("Mapped to 0x%p (%d bytes)\n", mem, PARAGRAPH_LEN);
++ }
++
++ if (pScrn->videoRam * 1024 > 1024 * 1024 * 4) {
++ perror("Error but keep going");
++
++ xf86DrvMsg(pScrn->scrnIndex, X_INFO, "pScrn-> videoRAM is greater than 4MB but keep going\n");
++ }
++
++ dPtr->FBBase = mem;
++
++ xf86DrvMsg(pScrn->scrnIndex, X_INFO, "FBBase is set to %p \n", dPtr->FBBase);
+ /*
+ * next we save the current state and setup the first mode
+ */