2 * This file is part of the Palacios Virtual Machine Monitor developed
3 * by the V3VEE Project with funding from the United States National
4 * Science Foundation and the Department of Energy.
6 * The V3VEE Project is a joint project between Northwestern University
7 * and the University of New Mexico. You can find out more at
10 * Copyright (c) 2008, Jack Lange <jarusl@cs.northwestern.edu>
11 * Copyright (c) 2008, The V3VEE Project <http://www.v3vee.org>
12 * All rights reserved.
14 * Author: Jack Lange <jarusl@cs.northwestern.edu>
16 * This is free software. You are permitted to use,
17 * redistribute, and modify it as specified in the file "V3VEE_LICENSE".
20 #include <palacios/vmm_config.h>
21 #include <palacios/vmm.h>
22 #include <palacios/vmm_debug.h>
23 #include <palacios/vmm_msr.h>
24 #include <palacios/vmm_decoder.h>
25 #include <palacios/vmm_profiler.h>
26 #include <palacios/vmm_mem.h>
27 #include <palacios/vmm_hypercall.h>
30 #include <devices/serial.h>
31 #include <devices/keyboard.h>
32 #include <devices/8259a.h>
33 #include <devices/8254.h>
34 #include <devices/nvram.h>
35 #include <devices/generic.h>
36 #include <devices/ramdisk.h>
37 #include <devices/cdrom.h>
38 #include <devices/bochs_debug.h>
39 #include <devices/os_debug.h>
40 #include <devices/apic.h>
41 #include <devices/io_apic.h>
42 #include <devices/para_net.h>
43 #include <devices/pci.h>
47 #include <palacios/vmm_host_events.h>
55 static int setup_memory_map(struct guest_info * info, struct v3_vm_config * config_ptr);
56 static int setup_devices(struct guest_info * info, struct v3_vm_config * config_ptr);
57 static struct vm_device * configure_generic(struct guest_info * info, struct v3_vm_config * config_ptr);
62 static int passthrough_mem_write(addr_t guest_addr, void * src, uint_t length, void * priv_data) {
65 // memcpy((void*)guest_addr, src, length);
66 PrintDebug("Write of %d bytes to %p\n", length, (void *)guest_addr);
67 PrintDebug("Write Value = %p\n", (void *)*(addr_t *)src);
74 int v3_config_guest(struct guest_info * info, struct v3_vm_config * config_ptr) {
75 extern v3_cpu_arch_t v3_cpu_type;
77 // Initialize the subsystem data strutures
80 v3_init_msr_map(info);
81 v3_init_interrupt_state(info);
82 v3_init_dev_mgr(info);
83 v3_init_host_events(info);
85 v3_init_decoder(info);
87 v3_init_shadow_map(info);
89 v3_init_hypercall_map(info);
92 if (v3_cpu_type == V3_SVM_REV3_CPU) {
93 info->shdw_pg_mode = NESTED_PAGING;
95 v3_init_shadow_page_state(info);
96 info->shdw_pg_mode = SHADOW_PAGING;
99 // Initial CPU operating mode
100 info->cpu_mode = REAL;
101 info->mem_mode = PHYSICAL_MEM;
103 // Amount of ram the Guest will have, rounded to a 4K page boundary
104 info->mem_size = config_ptr->mem_size & ~(addr_t)0xfff;
106 // Configure the memory map for the guest
107 if (setup_memory_map(info, config_ptr) == -1) {
108 PrintError("Setting up guest memory map failed...\n");
112 // Configure the devices for the guest
113 setup_devices(info, config_ptr);
117 if (config_ptr->enable_profiling) {
118 info->enable_profiler = 1;
119 v3_init_profiler(info);
121 info->enable_profiler = 0;
124 //v3_hook_io_port(info, 1234, &IO_Read, NULL, info);
126 // Setup initial cpu register state
128 info->vm_regs.rsp = 0x0;
136 * The amount of guest memory is stored in info->mem_size
137 * We need to make sure the memory map extends to cover it
139 static int setup_memory_map(struct guest_info * info, struct v3_vm_config * config_ptr) {
140 addr_t mem_pages = info->mem_size >> 12;
142 PrintDebug("Setting up memory map (memory size=%dMB)\n", (uint_t)(info->mem_size / (1024 * 1024)));
144 // Fill up to the 640K hole
145 if (mem_pages >= 160) {
146 if (v3_add_shadow_mem(info, 0x0, 0xa0000, (addr_t)V3_AllocPages(160)) == -1) {
147 PrintError("Could not map full conventional memory\n");
151 // Less than 640k of memory
152 if (v3_add_shadow_mem(info, 0x0, (mem_pages * PAGE_SIZE), (addr_t)V3_AllocPages(mem_pages)) == -1) {
153 PrintError("Could not map subset of conventional memory\n");
159 #define VGABIOS_START 0x000c0000
160 #define ROMBIOS_START 0x000f0000
164 if (v3_add_shadow_mem(info, 0xa0000, 0xc0000, 0xa0000) == -1) {
165 PrintError("Could not map VGA framebuffer\n");
169 v3_hook_write_mem(info, 0xa0000, 0xc0000, 0xa0000, passthrough_mem_write, NULL);
175 uint_t num_pages = (config_ptr->vgabios_size + PAGE_SIZE - 1) / PAGE_SIZE;
176 void * guest_mem = V3_AllocPages(num_pages);
177 addr_t vgabios_end = VGABIOS_START + (num_pages * PAGE_SIZE);
179 PrintDebug("Layout Region %d bytes\n", config_ptr->vgabios_size);
180 memcpy(V3_VAddr(guest_mem), config_ptr->vgabios, config_ptr->vgabios_size);
182 if (v3_add_shadow_mem(info, VGABIOS_START, vgabios_end, (addr_t)guest_mem) == -1) {
183 PrintError("Could not map VGABIOS\n");
187 PrintDebug("Adding Shadow Region (0x%p-0x%p) -> 0x%p\n",
188 (void *)VGABIOS_START,
193 // Fill in the space between the VGABIOS and the ROMBIOS
194 // We'll just back this to shadow memory for now....
195 if (v3_add_shadow_mem(info, vgabios_end, ROMBIOS_START,
196 (addr_t)V3_AllocPages((ROMBIOS_START - vgabios_end) / PAGE_SIZE)) == -1) {
197 PrintError("Could not map VGABIOS->ROMBIOS gap\n");
204 uint_t num_pages = (config_ptr->rombios_size + PAGE_SIZE - 1) / PAGE_SIZE;
205 void * guest_mem = V3_AllocPages(num_pages);
206 addr_t rombios_end = ROMBIOS_START + (num_pages * PAGE_SIZE);
208 PrintDebug("Layout Region %d bytes\n", config_ptr->rombios_size);
209 memcpy(V3_VAddr(guest_mem), config_ptr->rombios, config_ptr->rombios_size);
211 if (v3_add_shadow_mem(info, ROMBIOS_START, rombios_end, (addr_t)guest_mem) == -1) {
212 PrintError("Could not map ROMBIOS\n");
216 PrintDebug("Adding Shadow Region (0x%p-0x%p) -> 0x%p\n",
217 (void *)ROMBIOS_START,
221 if (rombios_end != 0x100000) {
222 PrintError("ROMBIOS must reach the 1MB barrier....\n");
229 #define SEASTAR_START 0xffe00000
230 #define SEASTAR_END 0xffffffff
232 // Fill in generic memory below the seastar
233 addr_t top_of_mem = (SEASTAR_START < info->mem_size) ? SEASTAR_START : info->mem_size;
234 int num_low_pages = (top_of_mem - 0x100000) / PAGE_SIZE;
236 if (v3_add_shadow_mem(info, 0x100000, top_of_mem, (addr_t)V3_AllocPages(num_low_pages)) == -1) {
237 PrintError("Could not extended memory below 4G\n");
241 // Map the Seastar straight through
242 if (v3_add_shadow_mem(info, SEASTAR_START, SEASTAR_END, SEASTAR_START) == -1) {
243 PrintError("Could not map through the seastar\n");
248 // Add memory above the seastar
249 if (info->mem_size > SEASTAR_END) {
250 int num_high_pages = mem_pages - (SEASTAR_END / PAGE_SIZE);
252 if (v3_add_shadow_mem(info, SEASTAR_END, info->mem_size, (addr_t)V3_AllocPages(num_high_pages)) == -1) {
253 PrintError("Could not map extended memory above 4G\n");
259 // Fill in the extended memory map....
261 int num_ext_pages = mem_pages - (0x100000 / PAGE_SIZE);
263 if (num_ext_pages > 0) {
264 if (v3_add_shadow_mem(info, 0x100000, info->mem_size, (addr_t)V3_AllocPages(num_ext_pages)) == -1) {
265 PrintError("Could not allocate extended shadow memory\n");
272 print_shadow_map(info);
279 static int setup_devices(struct guest_info * info, struct v3_vm_config * config_ptr) {
280 struct vm_device * ramdisk = NULL;
281 struct vm_device * cdrom = NULL;
283 struct vm_device * pci = v3_create_pci();
285 struct vm_device * nvram = v3_create_nvram();
286 //struct vm_device * timer = v3_create_timer();
287 struct vm_device * pic = v3_create_pic();
288 struct vm_device * keyboard = v3_create_keyboard();
289 struct vm_device * pit = v3_create_pit();
290 struct vm_device * bochs_debug = v3_create_bochs_debug();
291 struct vm_device * os_debug = v3_create_os_debug();
292 struct vm_device * apic = v3_create_apic();
293 struct vm_device * ioapic = v3_create_io_apic(apic);
294 struct vm_device * para_net = v3_create_para_net();
296 //struct vm_device * serial = v3_create_serial();
297 struct vm_device * generic = NULL;
299 int use_ramdisk = config_ptr->use_ramdisk;
300 int use_generic = USE_GENERIC;
304 PrintDebug("Creating Ramdisk\n");
305 ramdisk = v3_create_ramdisk();
306 cdrom = v3_create_cdrom(ramdisk, config_ptr->ramdisk, config_ptr->ramdisk_size);
311 generic = configure_generic(info, config_ptr);
315 v3_attach_device(info, pci);
318 v3_attach_device(info, nvram);
319 //v3_attach_device(info, timer);
320 v3_attach_device(info, pic);
321 v3_attach_device(info, pit);
322 v3_attach_device(info, keyboard);
323 // v3_attach_device(info, serial);
324 v3_attach_device(info, bochs_debug);
325 v3_attach_device(info, os_debug);
327 v3_attach_device(info, apic);
328 v3_attach_device(info, ioapic);
330 v3_attach_device(info, para_net);
333 v3_attach_device(info, ramdisk);
334 v3_attach_device(info, cdrom);
338 // Important that this be attached last!
339 v3_attach_device(info, generic);
342 PrintDebugDevMgr(info);
345 // give keyboard interrupts to vm
346 // no longer needed since we have a keyboard device
347 //hook_irq(&vm_info, 1);
350 // give floppy controller to vm
351 v3_hook_passthrough_irq(info, 6);
356 PrintDebug("Hooking IDE IRQs\n");
359 v3_hook_passthrough_irq(info, 14);
362 v3_hook_passthrough_irq(info, 15);
371 static struct vm_device * configure_generic(struct guest_info * info, struct v3_vm_config * config_ptr) {
372 PrintDebug("Creating Generic Device\n");
373 struct vm_device * generic = v3_create_generic();
375 // Make the DMA controller invisible
376 v3_generic_add_port_range(generic, 0x00, 0x07, GENERIC_PRINT_AND_IGNORE); // DMA 1 channels 0,1,2,3 (address, counter)
377 v3_generic_add_port_range(generic, 0xc0, 0xc7, GENERIC_PRINT_AND_IGNORE); // DMA 2 channels 4,5,6,7 (address, counter)
378 v3_generic_add_port_range(generic, 0x87, 0x87, GENERIC_PRINT_AND_IGNORE); // DMA 1 channel 0 page register
379 v3_generic_add_port_range(generic, 0x83, 0x83, GENERIC_PRINT_AND_IGNORE); // DMA 1 channel 1 page register
380 v3_generic_add_port_range(generic, 0x81, 0x81, GENERIC_PRINT_AND_IGNORE); // DMA 1 channel 2 page register
381 v3_generic_add_port_range(generic, 0x82, 0x82, GENERIC_PRINT_AND_IGNORE); // DMA 1 channel 3 page register
382 v3_generic_add_port_range(generic, 0x8f, 0x8f, GENERIC_PRINT_AND_IGNORE); // DMA 2 channel 4 page register
383 v3_generic_add_port_range(generic, 0x8b, 0x8b, GENERIC_PRINT_AND_IGNORE); // DMA 2 channel 5 page register
384 v3_generic_add_port_range(generic, 0x89, 0x89, GENERIC_PRINT_AND_IGNORE); // DMA 2 channel 6 page register
385 v3_generic_add_port_range(generic, 0x8a, 0x8a, GENERIC_PRINT_AND_IGNORE); // DMA 2 channel 7 page register
386 v3_generic_add_port_range(generic, 0x08, 0x0f, GENERIC_PRINT_AND_IGNORE); // DMA 1 misc registers (csr, req, smask,mode,clearff,reset,enable,mmask)
387 v3_generic_add_port_range(generic, 0xd0, 0xde, GENERIC_PRINT_AND_IGNORE); // DMA 2 misc registers
392 // Make the Serial ports invisible
394 v3_generic_add_port_range(generic, 0x3f8, 0x3f8+7, GENERIC_PRINT_AND_IGNORE); // COM 1
395 v3_generic_add_port_range(generic, 0x2f8, 0x2f8+7, GENERIC_PRINT_AND_IGNORE); // COM 2
400 v3_generic_add_port_range(generic, 0x3e8, 0x3e8+7, GENERIC_PRINT_AND_IGNORE); // COM 3
401 v3_generic_add_port_range(generic, 0x2e8, 0x2e8+7, GENERIC_PRINT_AND_IGNORE); // COM 4
406 // Make the PCI bus invisible (at least it's configuration)
408 v3_generic_add_port_range(generic, 0xcf8, 0xcf8, GENERIC_PRINT_AND_IGNORE); // PCI Config Address
409 v3_generic_add_port_range(generic, 0xcfc, 0xcfc, GENERIC_PRINT_AND_IGNORE); // PCI Config Data
415 // Monitor the IDE controllers (very slow)
416 v3_generic_add_port_range(generic, 0x170, 0x178, GENERIC_PRINT_AND_PASSTHROUGH); // IDE 1
417 v3_generic_add_port_range(generic, 0x376, 0x377, GENERIC_PRINT_AND_PASSTHROUGH); // IDE 1
421 v3_generic_add_port_range(generic, 0x1f0, 0x1f8, GENERIC_PRINT_AND_PASSTHROUGH); // IDE 0
422 v3_generic_add_port_range(generic, 0x3f6, 0x3f7, GENERIC_PRINT_AND_PASSTHROUGH); // IDE 0
428 // Make the floppy controllers invisible
430 v3_generic_add_port_range(generic, 0x3f0, 0x3f2, GENERIC_PRINT_AND_IGNORE); // Primary floppy controller (base,statusa/statusb,DOR)
431 v3_generic_add_port_range(generic, 0x3f4, 0x3f5, GENERIC_PRINT_AND_IGNORE); // Primary floppy controller (mainstat/datarate,data)
432 v3_generic_add_port_range(generic, 0x3f7, 0x3f7, GENERIC_PRINT_AND_IGNORE); // Primary floppy controller (DIR)
433 v3_generic_add_port_range(generic, 0x370, 0x372, GENERIC_PRINT_AND_IGNORE); // Secondary floppy controller (base,statusa/statusb,DOR)
434 v3_generic_add_port_range(generic, 0x374, 0x375, GENERIC_PRINT_AND_IGNORE); // Secondary floppy controller (mainstat/datarate,data)
435 v3_generic_add_port_range(generic, 0x377, 0x377, GENERIC_PRINT_AND_IGNORE); // Secondary floppy controller (DIR)
441 // Make the parallel port invisible
443 v3_generic_add_port_range(generic, 0x378, 0x37f, GENERIC_PRINT_AND_IGNORE);
449 // Monitor graphics card operations
451 v3_generic_add_port_range(generic, 0x3b0, 0x3bb, GENERIC_PRINT_AND_PASSTHROUGH);
452 v3_generic_add_port_range(generic, 0x3c0, 0x3df, GENERIC_PRINT_AND_PASSTHROUGH);
458 // Make the ISA PNP features invisible
460 v3_generic_add_port_range(generic, 0x274, 0x277, GENERIC_PRINT_AND_IGNORE);
461 v3_generic_add_port_range(generic, 0x279, 0x279, GENERIC_PRINT_AND_IGNORE);
462 v3_generic_add_port_range(generic, 0xa79, 0xa79, GENERIC_PRINT_AND_IGNORE);
467 // Monitor any network card (realtek ne2000) operations
468 v3_generic_add_port_range(generic, 0xc100, 0xc1ff, GENERIC_PRINT_AND_PASSTHROUGH);
473 // Make any Bus master ide controller invisible
475 v3_generic_add_port_range(generic, 0xc000, 0xc00f, GENERIC_PRINT_AND_IGNORE);
477 // v3_generic_add_port_range(generic, 0x378, 0x400, GENERIC_PRINT_AND_IGNORE);