2 * This file is part of the Palacios Virtual Machine Monitor developed
3 * by the V3VEE Project with funding from the United States National
4 * Science Foundation and the Department of Energy.
6 * The V3VEE Project is a joint project between Northwestern University
7 * and the University of New Mexico. You can find out more at
10 * Copyright (c) 2008, Jack Lange <jarusl@cs.northwestern.edu>
11 * Copyright (c) 2008, The V3VEE Project <http://www.v3vee.org>
12 * All rights reserved.
14 * Author: Jack Lange <jarusl@cs.northwestern.edu>
16 * This is free software. You are permitted to use,
17 * redistribute, and modify it as specified in the file "V3VEE_LICENSE".
20 #include <palacios/vmm_config.h>
21 #include <palacios/vmm.h>
22 #include <palacios/vmm_debug.h>
23 #include <palacios/vmm_msr.h>
24 #include <palacios/vmm_decoder.h>
25 #include <palacios/vmm_profiler.h>
26 #include <palacios/vmm_mem.h>
27 #include <palacios/vmm_hypercall.h>
28 #include <palacios/vmm_dev_mgr.h>
31 #include <devices/generic.h>
32 #include <devices/ide.h>
33 #include <devices/ram_cd.h>
34 #include <devices/net_cd.h>
35 #include <devices/ram_hd.h>
36 #include <devices/net_hd.h>
39 #include <palacios/vmm_host_events.h>
44 #include <palacios/vmm_socket.h>
47 static int setup_memory_map(struct guest_info * info, struct v3_vm_config * config_ptr);
48 static int setup_devices(struct guest_info * info, struct v3_vm_config * config_ptr);
49 static int configure_generic(struct guest_info * info, struct v3_vm_config * config_ptr);
54 static int passthrough_mem_write(addr_t guest_addr, void * src, uint_t length, void * priv_data) {
57 // memcpy((void*)guest_addr, src, length);
58 PrintDebug("Write of %d bytes to %p\n", length, (void *)guest_addr);
59 PrintDebug("Write Value = %p\n", (void *)*(addr_t *)src);
65 int v3_pre_config_guest(struct guest_info * info, struct v3_vm_config * config_ptr) {
66 extern v3_cpu_arch_t v3_cpu_type;
68 // Amount of ram the Guest will have, rounded to a 4K page boundary
69 info->mem_size = config_ptr->mem_size & ~(addr_t)0xfff;
72 // Initialize the subsystem data strutures
75 v3_init_msr_map(info);
76 v3_init_interrupt_state(info);
77 v3_init_exception_state(info);
78 v3_init_dev_mgr(info);
79 v3_init_host_events(info);
82 v3_init_decoder(info);
84 v3_init_hypercall_map(info);
87 // Initialize the memory map
88 v3_init_shadow_map(info);
90 if ((v3_cpu_type == V3_SVM_REV3_CPU) &&
91 (config_ptr->enable_nested_paging == 1)) {
92 PrintDebug("Guest Page Mode: NESTED_PAGING\n");
93 info->shdw_pg_mode = NESTED_PAGING;
95 PrintDebug("Guest Page Mode: SHADOW_PAGING\n");
96 v3_init_shadow_page_state(info);
97 info->shdw_pg_mode = SHADOW_PAGING;
100 if (config_ptr->enable_profiling) {
101 info->enable_profiler = 1;
102 v3_init_profiler(info);
104 info->enable_profiler = 0;
108 // Initial CPU operating mode
109 info->cpu_mode = REAL;
110 info->mem_mode = PHYSICAL_MEM;
116 int v3_post_config_guest(struct guest_info * info, struct v3_vm_config * config_ptr) {
118 // Configure the memory map for the guest
119 if (setup_memory_map(info, config_ptr) == -1) {
120 PrintError("Setting up guest memory map failed...\n");
124 //v3_hook_io_port(info, 1234, &IO_Read, NULL, info);
126 if (setup_devices(info, config_ptr) == -1) {
127 PrintError("Failed to setup devices\n");
131 info->run_state = VM_STOPPED;
133 info->vm_regs.rdi = 0;
134 info->vm_regs.rsi = 0;
135 info->vm_regs.rbp = 0;
136 info->vm_regs.rsp = 0;
137 info->vm_regs.rbx = 0;
138 info->vm_regs.rdx = 0;
139 info->vm_regs.rcx = 0;
140 info->vm_regs.rax = 0;
150 * The amount of guest memory is stored in info->mem_size
151 * We need to make sure the memory map extends to cover it
153 static int setup_memory_map(struct guest_info * info, struct v3_vm_config * config_ptr) {
154 PrintDebug("Setting up memory map (memory size=%dMB)\n", (uint_t)(info->mem_size / (1024 * 1024)));
158 if (v3_add_shadow_mem(info, 0xa0000, 0xc0000, 0xa0000) == -1) {
159 PrintError("Could not map VGA framebuffer\n");
163 v3_hook_write_mem(info, 0xa0000, 0xc0000, 0xa0000, passthrough_mem_write, NULL);
166 #define VGABIOS_START 0x000c0000
167 #define ROMBIOS_START 0x000f0000
171 addr_t vgabios_dst = v3_get_shadow_addr(&(info->mem_map.base_region), VGABIOS_START);
172 memcpy(V3_VAddr((void *)vgabios_dst), config_ptr->vgabios, config_ptr->vgabios_size);
177 addr_t rombios_dst = v3_get_shadow_addr(&(info->mem_map.base_region), ROMBIOS_START);
178 memcpy(V3_VAddr((void *)rombios_dst), config_ptr->rombios, config_ptr->rombios_size);
183 #define SEASTAR_START 0xffe00000
184 #define SEASTAR_END 0xffffffff
185 // Map the Seastar straight through
186 if (v3_add_shadow_mem(info, SEASTAR_START, SEASTAR_END, SEASTAR_START) == -1) {
187 PrintError("Could not map through the seastar\n");
193 print_shadow_map(info);
200 static int setup_devices(struct guest_info * info, struct v3_vm_config * config_ptr) {
202 v3_create_device(info, "8259A", NULL);
203 v3_create_device(info, "KEYBOARD", NULL);
204 v3_create_device(info, "8254_PIT", NULL);
205 v3_create_device(info, "BOCHS_DEBUG", NULL);
206 v3_create_device(info, "OS_DEBUG", NULL);
207 v3_create_device(info, "LAPIC", NULL);
208 v3_create_device(info, "IOAPIC", "LAPIC");
209 v3_create_device(info, "VMNET", NULL);
211 int use_generic = USE_GENERIC;
213 if (config_ptr->enable_pci == 1) {
214 struct ide_cfg ide_config = {"PCI", "PIIX3"};
216 v3_create_device(info, "PCI", NULL);
217 v3_create_device(info, "i440FX", "PCI");
218 v3_create_device(info, "PIIX3", "PCI");
221 v3_create_device(info, "LNX_VIRTIO_BLK", "PCI");
222 v3_create_device(info, "SYM_SWAP", "LNX_VIRTIO_BLK");
224 v3_create_device(info, "IDE", &ide_config);
226 v3_create_device(info, "IDE", NULL);
230 if (config_ptr->pri_disk_type != NONE) {
231 if (config_ptr->pri_disk_type == CDROM) {
232 if (config_ptr->pri_disk_con == RAM) {
233 struct ram_cd_cfg cfg = {"IDE", 0, 0,
234 (addr_t)(config_ptr->pri_disk_info.ram.data_ptr),
235 config_ptr->pri_disk_info.ram.size};
237 PrintDebug("Creating RAM CD\n");
239 v3_create_device(info, "RAM-CD", &cfg);
240 } else if (config_ptr->pri_disk_con == NETWORK) {
241 struct net_cd_cfg cfg = {"IDE", 0, 0,
242 config_ptr->pri_disk_info.net.ip_str,
243 config_ptr->pri_disk_info.net.port,
244 config_ptr->pri_disk_info.net.disk_name};
245 PrintDebug("Creating NET CD\n");
247 v3_create_device(info, "NET-CD", &cfg);
249 } else if (config_ptr->pri_disk_type == HARDDRIVE) {
250 if (config_ptr->pri_disk_con == RAM) {
251 struct ram_hd_cfg cfg = {"IDE", 0, 0,
252 (addr_t)(config_ptr->pri_disk_info.ram.data_ptr),
253 config_ptr->pri_disk_info.ram.size};
255 PrintDebug("Creating RAM HD\n");
257 v3_create_device(info, "RAM-HD", &cfg);
258 } else if (config_ptr->pri_disk_con == NETWORK) {
259 struct net_hd_cfg cfg = {"IDE", 0, 0,
260 config_ptr->pri_disk_info.net.ip_str,
261 config_ptr->pri_disk_info.net.port,
262 config_ptr->pri_disk_info.net.disk_name};
263 PrintDebug("Creating NET HD\n");
264 v3_create_device(info, "NET-HD", &cfg);
271 if (config_ptr->sec_disk_type != NONE) {
272 if (config_ptr->sec_disk_type == CDROM) {
273 if (config_ptr->sec_disk_con == RAM) {
274 struct ram_cd_cfg cfg = {"IDE", 0, 1,
275 (addr_t)(config_ptr->sec_disk_info.ram.data_ptr),
276 config_ptr->sec_disk_info.ram.size};
278 PrintDebug("Creating RAM CD\n");
279 v3_create_device(info, "RAM-CD", &cfg);
280 } else if (config_ptr->sec_disk_con == NETWORK) {
281 struct net_cd_cfg cfg = {"IDE", 0, 1,
282 config_ptr->sec_disk_info.net.ip_str,
283 config_ptr->sec_disk_info.net.port,
284 config_ptr->sec_disk_info.net.disk_name};
286 PrintDebug("Creating NET CD\n");
287 v3_create_device(info, "NET-CD", &cfg);
289 } else if (config_ptr->sec_disk_type == HARDDRIVE) {
290 if (config_ptr->sec_disk_con == RAM) {
291 struct ram_hd_cfg cfg = {"IDE", 0, 1,
292 (addr_t)(config_ptr->sec_disk_info.ram.data_ptr),
293 config_ptr->sec_disk_info.ram.size};
294 PrintDebug("Creating RAM HD\n");
295 v3_create_device(info, "RAM-HD", &cfg);
296 } else if (config_ptr->sec_disk_con == NETWORK) {
297 struct net_hd_cfg cfg = {"IDE", 0, 1,
298 config_ptr->sec_disk_info.net.ip_str,
299 config_ptr->sec_disk_info.net.port,
300 config_ptr->sec_disk_info.net.disk_name};
301 PrintDebug("Creating NET HD\n");
302 v3_create_device(info, "NET-HD", &cfg);
310 configure_generic(info, config_ptr);
313 // This should go last because it requires information about the Harddrives
314 v3_create_device(info, "NVRAM", "IDE");
316 PrintDebugDevMgr(info);
324 static int configure_generic(struct guest_info * info, struct v3_vm_config * config_ptr) {
325 PrintDebug("Creating Generic Device\n");
326 v3_create_device(info, "GENERIC", NULL);
329 struct vm_device * generic = v3_find_dev(info, "GENERIC");
332 PrintError("Could not find generic device\n");
336 // port 0x92: A20 enable/disable (bit 2) (This causes an MMU flush)
339 // Make the DMA controller invisible
340 v3_generic_add_port_range(generic, 0x00, 0x07, GENERIC_PRINT_AND_IGNORE); // DMA 1 channels 0,1,2,3 (address, counter)
341 v3_generic_add_port_range(generic, 0xc0, 0xc7, GENERIC_PRINT_AND_IGNORE); // DMA 2 channels 4,5,6,7 (address, counter)
342 v3_generic_add_port_range(generic, 0x87, 0x87, GENERIC_PRINT_AND_IGNORE); // DMA 1 channel 0 page register
343 v3_generic_add_port_range(generic, 0x83, 0x83, GENERIC_PRINT_AND_IGNORE); // DMA 1 channel 1 page register
344 v3_generic_add_port_range(generic, 0x81, 0x81, GENERIC_PRINT_AND_IGNORE); // DMA 1 channel 2 page register
345 v3_generic_add_port_range(generic, 0x82, 0x82, GENERIC_PRINT_AND_IGNORE); // DMA 1 channel 3 page register
346 v3_generic_add_port_range(generic, 0x8f, 0x8f, GENERIC_PRINT_AND_IGNORE); // DMA 2 channel 4 page register
347 v3_generic_add_port_range(generic, 0x8b, 0x8b, GENERIC_PRINT_AND_IGNORE); // DMA 2 channel 5 page register
348 v3_generic_add_port_range(generic, 0x89, 0x89, GENERIC_PRINT_AND_IGNORE); // DMA 2 channel 6 page register
349 v3_generic_add_port_range(generic, 0x8a, 0x8a, GENERIC_PRINT_AND_IGNORE); // DMA 2 channel 7 page register
350 v3_generic_add_port_range(generic, 0x08, 0x0f, GENERIC_PRINT_AND_IGNORE); // DMA 1 misc registers (csr, req, smask,mode,clearff,reset,enable,mmask)
351 v3_generic_add_port_range(generic, 0xd0, 0xde, GENERIC_PRINT_AND_IGNORE); // DMA 2 misc registers
356 // Make the Serial ports invisible
358 v3_generic_add_port_range(generic, 0x3f8, 0x3f8+7, GENERIC_PRINT_AND_IGNORE); // COM 1
359 v3_generic_add_port_range(generic, 0x2f8, 0x2f8+7, GENERIC_PRINT_AND_IGNORE); // COM 2
364 v3_generic_add_port_range(generic, 0x3e8, 0x3e8+7, GENERIC_PRINT_AND_IGNORE); // COM 3
365 v3_generic_add_port_range(generic, 0x2e8, 0x2e8+7, GENERIC_PRINT_AND_IGNORE); // COM 4
370 // Make the PCI bus invisible (at least it's configuration)
372 //v3_generic_add_port_range(generic, 0xcf8, 0xcf8, GENERIC_PRINT_AND_IGNORE); // PCI Config Address
373 //v3_generic_add_port_range(generic, 0xcfc, 0xcfc, GENERIC_PRINT_AND_IGNORE); // PCI Config Data
379 // Monitor the IDE controllers (very slow)
380 v3_generic_add_port_range(generic, 0x170, 0x178, GENERIC_PRINT_AND_PASSTHROUGH); // IDE 1
381 v3_generic_add_port_range(generic, 0x376, 0x377, GENERIC_PRINT_AND_PASSTHROUGH); // IDE 1
385 v3_generic_add_port_range(generic, 0x1f0, 0x1f8, GENERIC_PRINT_AND_PASSTHROUGH); // IDE 0
386 v3_generic_add_port_range(generic, 0x3f6, 0x3f7, GENERIC_PRINT_AND_PASSTHROUGH); // IDE 0
392 // Make the floppy controllers invisible
394 v3_generic_add_port_range(generic, 0x3f0, 0x3f2, GENERIC_PRINT_AND_IGNORE); // Primary floppy controller (base,statusa/statusb,DOR)
395 v3_generic_add_port_range(generic, 0x3f4, 0x3f5, GENERIC_PRINT_AND_IGNORE); // Primary floppy controller (mainstat/datarate,data)
396 v3_generic_add_port_range(generic, 0x3f7, 0x3f7, GENERIC_PRINT_AND_IGNORE); // Primary floppy controller (DIR)
397 v3_generic_add_port_range(generic, 0x370, 0x372, GENERIC_PRINT_AND_IGNORE); // Secondary floppy controller (base,statusa/statusb,DOR)
398 v3_generic_add_port_range(generic, 0x374, 0x375, GENERIC_PRINT_AND_IGNORE); // Secondary floppy controller (mainstat/datarate,data)
399 v3_generic_add_port_range(generic, 0x377, 0x377, GENERIC_PRINT_AND_IGNORE); // Secondary floppy controller (DIR)
405 // Make the parallel port invisible
407 v3_generic_add_port_range(generic, 0x378, 0x37f, GENERIC_PRINT_AND_IGNORE);
413 // Monitor graphics card operations
415 v3_generic_add_port_range(generic, 0x3b0, 0x3bb, GENERIC_PRINT_AND_PASSTHROUGH);
416 v3_generic_add_port_range(generic, 0x3c0, 0x3df, GENERIC_PRINT_AND_PASSTHROUGH);
422 // Make the ISA PNP features invisible
424 v3_generic_add_port_range(generic, 0x274, 0x277, GENERIC_PRINT_AND_IGNORE);
425 v3_generic_add_port_range(generic, 0x279, 0x279, GENERIC_PRINT_AND_IGNORE);
426 v3_generic_add_port_range(generic, 0xa79, 0xa79, GENERIC_PRINT_AND_IGNORE);
431 // Monitor any network card (realtek ne2000) operations
432 v3_generic_add_port_range(generic, 0xc100, 0xc1ff, GENERIC_PRINT_AND_PASSTHROUGH);
435 // v3_generic_add_port_range(generic, 0x378, 0x400, GENERIC_PRINT_AND_IGNORE);