2 * This file is part of the Palacios Virtual Machine Monitor developed
3 * by the V3VEE Project with funding from the United States National
4 * Science Foundation and the Department of Energy.
6 * The V3VEE Project is a joint project between Northwestern University
7 * and the University of New Mexico. You can find out more at
10 * Copyright (c) 2008, Jack Lange <jarusl@cs.northwestern.edu>
11 * Copyright (c) 2008, Lei Xia <lxia@cs.northwestern.edu>
12 * Copyright (c) 2008, The V3VEE Project <http://www.v3vee.org>
13 * All rights reserved.
15 * Author: Jack Lange <jarusl@cs.northwestern.edu>
16 * Lei Xia <lxia@cs.northwestern.edu>
18 * This is free software. You are permitted to use,
19 * redistribute, and modify it as specified in the file "V3VEE_LICENSE".
22 #include <palacios/vmm.h>
23 #include <palacios/vmm_dev_mgr.h>
24 #include <palacios/vm_guest_mem.h>
25 #include <devices/lnx_virtio_pci.h>
26 #include <palacios/vmm_vnet.h>
27 #include <palacios/vmm_sprintf.h>
28 #include <devices/pci.h>
31 #ifndef CONFIG_DEBUG_LINUX_VIRTIO_VNET
33 #define PrintDebug(fmt, args...)
37 #define QUEUE_SIZE 8192
38 #define CMD_QUEUE_SIZE 128
44 } __attribute__((packed));
51 struct virtio_vnet_state {
52 struct v3_vm_info * vm;
53 struct vnet_config vnet_cfg;
54 struct virtio_config virtio_cfg;
56 struct vm_device * pci_bus;
57 struct pci_device * pci_dev;
59 struct virtio_queue queue[NUM_QUEUES];
61 struct virtio_queue * cur_queue;
66 ulong_t pkt_sent, pkt_recv, pkt_drop;
70 #define VNET_GET_ROUTES 10
71 #define VNET_ADD_ROUTE 11
72 #define VNET_DEL_ROUTE 12
74 #define VNET_GET_LINKS 20
75 #define VNET_ADD_LINK 21
76 #define VNET_DEL_LINK 22
78 // structure of the vnet command header
79 struct vnet_ctrl_hdr {
82 } __attribute__((packed));
85 struct vnet_bridge_pkt {
88 uint8_t pkt[ETHERNET_PACKET_LEN];
89 }__attribute__((packed));
92 static int virtio_reset(struct virtio_vnet_state * vnet_state) {
94 memset(vnet_state->queue, 0, sizeof(struct virtio_queue) * NUM_QUEUES);
96 vnet_state->cur_queue = &(vnet_state->queue[0]);
98 vnet_state->virtio_cfg.status = 0;
99 vnet_state->virtio_cfg.pci_isr = 0;
101 vnet_state->queue[0].queue_size = CMD_QUEUE_SIZE;
102 vnet_state->queue[1].queue_size = QUEUE_SIZE;
103 vnet_state->queue[2].queue_size = QUEUE_SIZE;
105 memset(&(vnet_state->vnet_cfg), 0, sizeof(struct vnet_config));
106 v3_lock_init(&(vnet_state->lock));
113 static int get_desc_count(struct virtio_queue * q, int index) {
114 struct vring_desc * tmp_desc = &(q->desc[index]);
117 while (tmp_desc->flags & VIRTIO_NEXT_FLAG) {
118 tmp_desc = &(q->desc[tmp_desc->next]);
128 static int handle_cmd_kick(struct guest_info * core, struct virtio_vnet_state * vnet_state) {
129 struct virtio_queue * q = &(vnet_state->queue[0]);
131 PrintDebug("VNET Bridge: Handling command queue\n");
133 while (q->cur_avail_idx != q->avail->index) {
134 struct vring_desc * hdr_desc = NULL;
135 struct vring_desc * buf_desc = NULL;
136 struct vring_desc * status_desc = NULL;
137 uint16_t desc_idx = q->avail->ring[q->cur_avail_idx % QUEUE_SIZE];
138 uint16_t desc_cnt = get_desc_count(q, desc_idx);
139 struct vnet_ctrl_hdr * hdr = NULL;
142 uint8_t * status_ptr = NULL;
146 PrintDebug("VNET Bridge: CMD: Descriptor Count=%d, index=%d, desc_idx=%d\n", desc_cnt, q->cur_avail_idx % QUEUE_SIZE, desc_idx);
149 PrintError("VNET Bridge cmd must include at least 3 descriptors (cnt=%d)\n", desc_cnt);
153 hdr_desc = &(q->desc[desc_idx]);
155 if (guest_pa_to_host_va(core, hdr_desc->addr_gpa, (addr_t *)&hdr) == -1) {
156 PrintError("Could not translate VirtioVNET header address\n");
160 desc_idx = hdr_desc->next;
162 if (hdr->cmd_type == VNET_ADD_ROUTE) {
164 for (i = 0; i < hdr->num_cmds; i++) {
165 uint8_t tmp_status = 0;
166 struct v3_vnet_route * route = NULL;
168 buf_desc = &(q->desc[desc_idx]);
170 if (guest_pa_to_host_va(core, buf_desc->addr_gpa, (addr_t *)&(route)) == -1) {
171 PrintError("Could not translate route address\n");
176 PrintDebug("VNET Bridge: Adding VNET Route\n");
178 tmp_status = v3_vnet_add_route(*route);
180 PrintDebug("VNET Route Added\n");
182 if (tmp_status != 0) {
183 PrintError("Error adding VNET ROUTE\n");
187 xfer_len += buf_desc->length;
188 desc_idx = buf_desc->next;
195 status_desc = &(q->desc[desc_idx]);
197 if (guest_pa_to_host_va(core, status_desc->addr_gpa, (addr_t *)&status_ptr) == -1) {
198 PrintError("VirtioVNET Error could not translate status address\n");
202 xfer_len += status_desc->length;
203 *status_ptr = status;
205 PrintDebug("Transferred %d bytes (xfer_len)\n", xfer_len);
206 q->used->ring[q->used->index % QUEUE_SIZE].id = q->avail->ring[q->cur_avail_idx % QUEUE_SIZE];
207 q->used->ring[q->used->index % QUEUE_SIZE].length = xfer_len; // set to total inbound xfer length
214 if (!(q->avail->flags & VIRTIO_NO_IRQ_FLAG)) {
215 PrintDebug("Raising IRQ %d\n", vnet_state->pci_dev->config_header.intr_line);
216 v3_pci_raise_irq(vnet_state->pci_bus, 0, vnet_state->pci_dev);
217 vnet_state->virtio_cfg.pci_isr = 1;
225 static int vnet_pkt_input_cb(struct v3_vm_info * vm, struct v3_vnet_pkt vnet_pkts[], uint16_t pkt_num, void * private_data){
226 struct virtio_vnet_state * vnet_state = (struct virtio_vnet_state *)private_data;
227 struct virtio_queue * q = &(vnet_state->queue[RECV_QUEUE]);
231 struct v3_vnet_pkt *pkt;
236 flags = v3_lock_irqsave(vnet_state->lock);
238 if (q->ring_avail_addr == 0) {
239 PrintError("Queue is not set\n");
243 PrintDebug("VNET Bridge: RX: running on cpu: %d, num of pkts: %d\n", V3_Get_CPU(), pkt_num);
245 for(sent = 0; sent < pkt_num; sent ++) {
246 pkt = &vnet_pkts[sent];
247 vnet_state->pkt_recv ++;
249 if (q->cur_avail_idx != q->avail->index) {
250 uint16_t pkt_idx = q->avail->ring[q->cur_avail_idx % q->queue_size];
251 struct vring_desc * pkt_desc = NULL;
252 struct vnet_bridge_pkt * virtio_pkt = NULL;
254 //if(q->cur_avail_idx % 100 == 0)
255 // PrintError("cur_avai_idx %d, idx: %d\n", q->cur_avail_idx, q->avail->index);
257 pkt_desc = &(q->desc[pkt_idx]);
258 PrintDebug("VNET Bridge RX: buffer desc len: %d\n", pkt_desc->length);
260 if (guest_pa_to_host_va(&(vm->cores[0]), pkt_desc->addr_gpa, (addr_t *)&(virtio_pkt)) == -1) {
261 PrintError("Could not translate buffer address\n");
265 PrintDebug("VNET Bridge: RX: pkt sent to guest pkt size: %d, dst link: %d\n", pkt->size, pkt->dst_id);
267 // Fill in dst packet buffer
268 virtio_pkt->link_id = pkt->dst_id;
269 virtio_pkt->pkt_size = pkt->size;
270 memcpy(virtio_pkt->pkt, pkt->data, pkt->size);
272 q->used->ring[q->used->index % q->queue_size].id = q->avail->ring[q->cur_avail_idx % q->queue_size];
273 q->used->ring[q->used->index % q->queue_size].length = sizeof(struct vnet_bridge_pkt); // This should be the total length of data sent to guest (header+pkt_data)
278 //PrintError("VNET Bridge: guest RX buffer full: cur_avai_idx %d, idx: %d\nDisable Bridge\n", q->cur_avail_idx, q->avail->index);
279 vnet_state->pkt_drop ++;
280 v3_vnet_disable_bridge();
288 if (!(q->avail->flags & VIRTIO_NO_IRQ_FLAG)) {
289 v3_pci_raise_irq(vnet_state->pci_bus, 0, vnet_state->pci_dev);
290 vnet_state->virtio_cfg.pci_isr = 0x1;
291 PrintDebug("Raising IRQ %d\n", vnet_state->pci_dev->config_header.intr_line);
298 #ifdef CONFIG_VNET_PROFILE
299 if (vnet_state->pkt_recv % 10000 == 0)
300 PrintError("Vnet Bridge: sent: %ld, rxed: %ld, dropped: %ld\n",
301 vnet_state->pkt_sent,
302 vnet_state->pkt_recv,
303 vnet_state->pkt_drop);
306 v3_unlock_irqrestore(vnet_state->lock, flags);
311 static void vnet_pkt_input_xcall(void *data){
312 struct v3_vnet_bridge_input_args *args = (struct v3_vnet_bridge_input_args *)data;
314 vnet_pkt_input_cb(args->vm, args->vnet_pkts, args->pkt_num, args->private_data);
317 static int handle_pkt_kick(struct guest_info *core, struct virtio_vnet_state * vnet_state)
319 struct virtio_queue * q = &(vnet_state->queue[XMIT_QUEUE]);
321 while (q->cur_avail_idx != q->avail->index) {
322 uint16_t desc_idx = q->avail->ring[q->cur_avail_idx % q->queue_size];
323 struct vring_desc * pkt_desc = NULL;
324 struct vnet_bridge_pkt * virtio_pkt = NULL;
326 pkt_desc = &(q->desc[desc_idx]);
328 PrintDebug("VNET Bridge: Handle TX desc buf_len: %d\n", pkt_desc->length);
330 if (guest_pa_to_host_va(core, pkt_desc->addr_gpa, (addr_t *)&(virtio_pkt)) == -1) {
331 PrintError("Could not translate buffer address\n");
335 PrintDebug("VNET Bridge: TX: on cpu %d pkt size: %d, dst link: %d\n", cpu, virtio_pkt->pkt_size, virtio_pkt->link_id);
337 v3_vnet_bridge_rx(virtio_pkt->pkt, virtio_pkt->pkt_size, virtio_pkt->link_id);
339 q->used->ring[q->used->index % q->queue_size].id = q->avail->ring[q->cur_avail_idx % q->queue_size];
340 q->used->ring[q->used->index % q->queue_size].length = pkt_desc->length; // What do we set this to????
343 vnet_state->pkt_sent ++;
348 //interrupt the vnet to poll pkts
349 int cpu = V3_Get_CPU();
350 cpu = (cpu == 0)?1:0;
351 v3_interrupt_cpu(vnet_state->vm, cpu, V3_VNET_POLLING_VECTOR);
353 if((vnet_state->pkt_sent % (QUEUE_SIZE/20)) == 0) { //optimized for guest's, batch the interrupts
354 if (!(q->avail->flags & VIRTIO_NO_IRQ_FLAG)) {
355 v3_pci_raise_irq(vnet_state->pci_bus, 0, vnet_state->pci_dev);
356 vnet_state->virtio_cfg.pci_isr = 0x1;
360 #ifdef CONFIG_VNET_PROFILE
361 if (vnet_state->pkt_sent % 10000 == 0)
362 PrintError("Vnet Bridge: sent: %ld, rxed: %ld, dropped: %ld\n",
363 vnet_state->pkt_sent,
364 vnet_state->pkt_recv,
365 vnet_state->pkt_drop);
372 static int handle_rx_kick(struct guest_info *core, struct virtio_vnet_state * vnet_state)
374 v3_vnet_enable_bridge();
379 static int vnet_virtio_io_write(struct guest_info * core, uint16_t port, void * src, uint_t length, void * private_data) {
380 struct virtio_vnet_state * vnet_state = (struct virtio_vnet_state *)private_data;
381 int port_idx = port % vnet_state->io_range_size;
383 PrintDebug("VNET Bridge: VIRTIO VNET Write for port %d len=%d, value=%x\n",
384 port, length, *(uint32_t *)src);
385 PrintDebug("VNET Bridge: port idx=%d\n", port_idx);
389 case GUEST_FEATURES_PORT:
391 PrintError("Illegal write length for guest features\n");
394 vnet_state->virtio_cfg.guest_features = *(uint32_t *)src;
397 case VRING_PG_NUM_PORT:
399 addr_t pfn = *(uint32_t *)src;
400 addr_t page_addr = (pfn << VIRTIO_PAGE_SHIFT);
402 vnet_state->cur_queue->pfn = pfn;
404 vnet_state->cur_queue->ring_desc_addr = page_addr ;
405 vnet_state->cur_queue->ring_avail_addr = page_addr + (QUEUE_SIZE * sizeof(struct vring_desc));
406 vnet_state->cur_queue->ring_used_addr = ( vnet_state->cur_queue->ring_avail_addr + \
407 sizeof(struct vring_avail) + \
408 (QUEUE_SIZE * sizeof(uint16_t)));
410 // round up to next page boundary.
411 vnet_state->cur_queue->ring_used_addr = (vnet_state->cur_queue->ring_used_addr + 0xfff) & ~0xfff;
413 if (guest_pa_to_host_va(core, vnet_state->cur_queue->ring_desc_addr, (addr_t *)&(vnet_state->cur_queue->desc)) == -1) {
414 PrintError("Could not translate ring descriptor address\n");
418 if (guest_pa_to_host_va(core, vnet_state->cur_queue->ring_avail_addr, (addr_t *)&(vnet_state->cur_queue->avail)) == -1) {
419 PrintError("Could not translate ring available address\n");
423 if (guest_pa_to_host_va(core, vnet_state->cur_queue->ring_used_addr, (addr_t *)&(vnet_state->cur_queue->used)) == -1) {
424 PrintError("Could not translate ring used address\n");
428 PrintDebug("VNET Bridge: RingDesc_addr=%p, Avail_addr=%p, Used_addr=%p\n",
429 (void *)(vnet_state->cur_queue->ring_desc_addr),
430 (void *)(vnet_state->cur_queue->ring_avail_addr),
431 (void *)(vnet_state->cur_queue->ring_used_addr));
433 PrintDebug("VNET Bridge: RingDesc=%p, Avail=%p, Used=%p\n",
434 vnet_state->cur_queue->desc, vnet_state->cur_queue->avail, vnet_state->cur_queue->used);
436 if(vnet_state->queue[RECV_QUEUE].avail != NULL){
437 vnet_state->ready = 1;
440 PrintError("Illegal write length for page frame number\n");
444 case VRING_Q_SEL_PORT:
445 vnet_state->virtio_cfg.vring_queue_selector = *(uint16_t *)src;
447 if (vnet_state->virtio_cfg.vring_queue_selector > NUM_QUEUES) {
448 PrintError("VNET Bridge device has no qeueues. Selected %d\n",
449 vnet_state->virtio_cfg.vring_queue_selector);
453 vnet_state->cur_queue = &(vnet_state->queue[vnet_state->virtio_cfg.vring_queue_selector]);
456 case VRING_Q_NOTIFY_PORT: {
457 uint16_t queue_idx = *(uint16_t *)src;
459 PrintDebug("VNET Bridge: Handling Kick\n");
461 if (queue_idx == 0) {
462 if (handle_cmd_kick(core, vnet_state) == -1) {
463 PrintError("Could not handle Virtio VNET Control command\n");
466 } else if (queue_idx == 1) {
467 if (handle_pkt_kick(core, vnet_state) == -1){
468 PrintError("Could not handle Virtio VNET TX\n");
471 } else if (queue_idx == 2) {
472 if (handle_rx_kick(core, vnet_state) == -1){
473 PrintError("Could not handle Virtio RX buffer refills Kick\n");
477 PrintError("VNET Bridge: Kick on invalid queue (%d)\n", queue_idx);
483 case VIRTIO_STATUS_PORT:
484 vnet_state->virtio_cfg.status = *(uint8_t *)src;
486 if (vnet_state->virtio_cfg.status == 0) {
487 PrintDebug("VNET Bridge: Resetting device\n");
488 virtio_reset(vnet_state);
493 case VIRTIO_ISR_PORT:
494 vnet_state->virtio_cfg.pci_isr = *(uint8_t *)src;
505 static int vnet_virtio_io_read(struct guest_info * core, uint16_t port, void * dst, uint_t length, void * private_data) {
507 struct virtio_vnet_state * vnet_state = (struct virtio_vnet_state *)private_data;
508 int port_idx = port % vnet_state->io_range_size;
511 PrintDebug("VirtioVNET: VIRTIO SYMBIOTIC Read for port %d (index =%d), length=%d\n",
512 port, port_idx, length);
515 case HOST_FEATURES_PORT:
517 PrintError("Illegal read length for host features\n");
521 *(uint32_t *)dst = vnet_state->virtio_cfg.host_features;
524 case VRING_PG_NUM_PORT:
526 PrintError("Illegal read length for page frame number\n");
530 *(uint32_t *)dst = vnet_state->cur_queue->pfn;
533 case VRING_SIZE_PORT:
535 PrintError("Illegal read length for vring size\n");
539 *(uint16_t *)dst = vnet_state->cur_queue->queue_size;
543 case VIRTIO_STATUS_PORT:
545 PrintError("Illegal read length for status\n");
549 *(uint8_t *)dst = vnet_state->virtio_cfg.status;
552 case VIRTIO_ISR_PORT:
553 *(uint8_t *)dst = vnet_state->virtio_cfg.pci_isr;
554 vnet_state->virtio_cfg.pci_isr = 0;
555 v3_pci_lower_irq(vnet_state->pci_bus, 0, vnet_state->pci_dev);
559 if ( (port_idx >= sizeof(struct virtio_config)) &&
560 (port_idx < (sizeof(struct virtio_config) + sizeof(struct vnet_config))) ) {
561 int cfg_offset = port_idx - sizeof(struct virtio_config);
562 uint8_t * cfg_ptr = (uint8_t *)&(vnet_state->vnet_cfg);
564 memcpy(dst, cfg_ptr + cfg_offset, length);
567 PrintError("Read of Unhandled Virtio Read\n");
579 static struct v3_device_ops dev_ops = {
586 static int dev_init(struct v3_vm_info * vm, v3_cfg_tree_t * cfg) {
587 struct vm_device * pci_bus = v3_find_dev(vm, v3_cfg_val(cfg, "bus"));
588 struct virtio_vnet_state * vnet_state = NULL;
589 struct pci_device * pci_dev = NULL;
590 char * name = v3_cfg_val(cfg, "name");
592 PrintDebug("VNET Bridge: Initializing VNET Bridge Control device: %s\n", name);
594 if (pci_bus == NULL) {
595 PrintError("VNET Bridge device require a PCI Bus");
599 vnet_state = (struct virtio_vnet_state *)V3_Malloc(sizeof(struct virtio_vnet_state));
600 memset(vnet_state, 0, sizeof(struct virtio_vnet_state));
604 struct vm_device * dev = v3_allocate_device(name, &dev_ops, vnet_state);
606 if (v3_attach_device(vm, dev) == -1) {
607 PrintError("Could not attach device %s\n", name);
612 // PCI initialization
614 struct v3_pci_bar bars[6];
615 int num_ports = sizeof(struct virtio_config) + sizeof(struct vnet_config);
616 int tmp_ports = num_ports;
619 // This gets the number of ports, rounded up to a power of 2
620 vnet_state->io_range_size = 1; // must be a power of 2
622 while (tmp_ports > 0) {
624 vnet_state->io_range_size <<= 1;
627 // this is to account for any low order bits being set in num_ports
628 // if there are none, then num_ports was already a power of 2 so we shift right to reset it
629 if ((num_ports & ((vnet_state->io_range_size >> 1) - 1)) == 0) {
630 vnet_state->io_range_size >>= 1;
633 for (i = 0; i < 6; i++) {
634 bars[i].type = PCI_BAR_NONE;
637 bars[0].type = PCI_BAR_IO;
638 bars[0].default_base_port = -1;
639 bars[0].num_ports = vnet_state->io_range_size;
640 bars[0].io_read = vnet_virtio_io_read;
641 bars[0].io_write = vnet_virtio_io_write;
642 bars[0].private_data = vnet_state;
644 pci_dev = v3_pci_register_device(pci_bus, PCI_STD_DEVICE,
645 0, PCI_AUTO_DEV_NUM, 0,
646 "LNX_VIRTIO_VNET", bars,
647 NULL, NULL, NULL, vnet_state);
650 PrintError("Could not register PCI Device\n");
654 pci_dev->config_header.vendor_id = VIRTIO_VENDOR_ID;
655 pci_dev->config_header.subsystem_vendor_id = VIRTIO_SUBVENDOR_ID;
656 pci_dev->config_header.device_id = VIRTIO_VNET_DEV_ID;
657 pci_dev->config_header.class = PCI_CLASS_MEMORY;
658 pci_dev->config_header.subclass = PCI_MEM_SUBCLASS_RAM;
659 pci_dev->config_header.subsystem_id = VIRTIO_VNET_SUBDEVICE_ID;
660 pci_dev->config_header.intr_pin = 1;
661 pci_dev->config_header.max_latency = 1; // ?? (qemu does it...)
664 vnet_state->pci_dev = pci_dev;
665 vnet_state->pci_bus = pci_bus;
668 virtio_reset(vnet_state);
670 V3_Print("Registering Virtio device as vnet bridge\n");
671 v3_vnet_add_bridge(vm, vnet_pkt_input_cb, vnet_pkt_input_xcall, 0, 500000, (void *)vnet_state);
678 device_register("LNX_VIRTIO_VNET", dev_init)