2 * This file is part of the Palacios Virtual Machine Monitor developed
3 * by the V3VEE Project with funding from the United States National
4 * Science Foundation and the Department of Energy.
6 * The V3VEE Project is a joint project between Northwestern University
7 * and the University of New Mexico. You can find out more at
10 * Copyright (c) 2008, Peter Dinda <pdinda@northwestern.edu>
11 * Copyright (c) 2008, The V3VEE Project <http://www.v3vee.org>
12 * All rights reserved.
14 * Author: Peter Dinda <pdinda@northwestern.edu>
16 * This is free software. You are permitted to use,
17 * redistribute, and modify it as specified in the file "V3VEE_LICENSE".
20 #include <palacios/vmm.h>
21 #include <palacios/vmm_dev_mgr.h>
22 #include <palacios/vmm_types.h>
24 #include <palacios/vmm_ringbuffer.h>
25 #include <palacios/vmm_lock.h>
28 #ifndef CONFIG_DEBUG_KEYBOARD
30 #define PrintDebug(fmt, args...)
33 #define KEYBOARD_DEBUG_80H 0
37 #define KEYBOARD_60H 0x60 // keyboard microcontroller
38 #define KEYBOARD_64H 0x64 // onboard microcontroller
40 #define KEYBOARD_DELAY_80H 0x80 // written for timing
42 #define KEYBOARD_IRQ 0x1
47 // bits for the output port
48 #define OUTPUT_RESET 0x01 // System reset on 0
49 #define OUTPUT_A20 0x02 // A20 gate (1= A20 is gated)
50 #define OUTPUT_RES1 0x04 // reserved
51 #define OUTPUT_RES2 0x08 // reserved
52 #define OUTPUT_OUTPUT_FULL 0x10 // output buffer full
53 #define OUTPUT_INPUT_EMPTY 0x20 // input buffer empty
54 #define OUTPUT_KBD_CLOCK 0x40 // keyboard clock (?)
55 #define OUTPUT_KBD_DATA 0x80 // keyboard data
57 // bits for the input port
59 #define INPUT_RES0 0x01 // reserved
60 #define INPUT_RES1 0x02 // reserved
61 #define INPUT_RES2 0x04 // reserved
62 #define INPUT_RES3 0x08 // reserved
63 #define INPUT_RAM 0x10 // set to 1 if RAM exists?
64 #define INPUT_JUMPER 0x20 // manufacturing jumper?
65 #define INPUT_DISPLAY 0x40 // 0=color, 1=mono
66 #define INPUT_KBD_INHIBIT 0x80 // 1=inhibit keyboard ?
69 #define MOUSE_ACK 0xfa
71 // for queue operations
75 // for queue operations - whether it's data or cmd waiting on 60h
79 // for queue operations - whether this is keyboard or mouse data on 60h
89 uint8_t irq_en : 1; // 1=interrupts enabled
90 uint8_t mouse_irq_en : 1; // 1=interrupts enabled for mouse
91 uint8_t self_test_ok : 1; // 1= self test passed
92 uint8_t override : 1; // MBZ for PS2
93 uint8_t disable : 1; // 1=disabled keyboard
94 uint8_t mouse_disable : 1; // 1=disabled mouse
95 uint8_t translate : 1; // 1=translate to set 1 scancodes (For PC Compatibility)
96 uint8_t rsvd : 1; // must be zero
97 } __attribute__((packed));
98 } __attribute__((packed));
99 } __attribute__((packed));
108 uint8_t out_buf_full : 1; // 1=full (data for system)
109 uint8_t in_buf_full : 1; // 1=full (data for 8042)
110 uint8_t self_test_ok : 1; // 1=self-test-passed
111 uint8_t cmd : 1; // 0=data on 60h, 1=cmd on 64h
112 uint8_t enabled : 1; // 1=keyboard is enabled
113 uint8_t mouse_buf_full : 1; // 1= mouse output buffer full
114 uint8_t timeout_err : 1; // 1=timeout of keybd
115 uint8_t parity_err : 1; // 1=parity error
116 } __attribute__((packed));
117 } __attribute__((packed));
118 } __attribute__((packed));
125 /* This QUEUE_SIZE must be 256 */
126 /* Its designed this way to cause the start/end index to automatically
127 wrap around (2^8 = 256) so an overrun will automatically readjust the
130 #define QUEUE_SIZE 256
132 uint8_t queue[QUEUE_SIZE];
139 struct keyboard_internal {
141 // 0x60 is the port for the keyboard microcontroller
142 // writes are commands
143 // reads from it usually return scancodes
144 // however, it can also return other data
145 // depending on the state of the onboard microcontroller
147 // 0x64 is the port for the onboard microcontroller
148 // writes are commands
152 // state of the onboard microcontroller
153 // this is needed because sometimes 0x60 reads come
154 // from the onboard microcontroller
155 enum {// Normal mode measn we deliver keys
156 // to the vm and accept commands from it
158 // after receiving cmd 0x60
159 // keybaord uC cmd will subsequently arrive
161 // after recieving 0xa5
162 // password arrives on data port, null terminated
164 // after having a d1 sent to 64
165 // we wait for a new output byte on 60
167 // after having a d2 sent to 64
168 // we wait for a new output byte on 60
169 // then make it available as a keystroke
171 // after having a d3 sent to 64
172 // we wait for a new output byte on 60
173 // then make it available as a mouse event
175 // after having a d4 sent to 64
176 // we wait for a new output byte on 60
177 // then send it to the mouse
179 // After the Keyboard LEDs are enabled
180 // we wait for the output byte on 64?
182 // After the Keyboard SET_RATE is called
183 // we wait for the output byte on 64?
189 // Normal mouse state
191 // this is used for setting sample rate
200 struct status_reg status;
202 uint8_t output_byte; // output port of onboard uC (e.g. A20)
203 uint8_t input_byte; // input port of onboard uC
210 struct queue kbd_queue;
211 struct queue mouse_queue;
217 static int update_kb_irq(struct vm_device * dev) {
218 struct keyboard_internal *state = (struct keyboard_internal *)(dev->private_data);
222 state->status.out_buf_full = 0;
223 state->status.mouse_buf_full = 0;
226 // If there is pending Keyboard data then it overrides mouse data
227 if (state->kbd_queue.count > 0) {
228 irq_num = KEYBOARD_IRQ;
229 } else if (state->mouse_queue.count > 0) {
231 state->status.mouse_buf_full = 1;
234 PrintDebug("keyboard: interrupt 0x%d\n", irq_num);
237 // Global output buffer flag (for both Keyboard and mouse)
238 state->status.out_buf_full = 1;
240 if (state->cmd.irq_en == 1) {
241 v3_raise_irq(dev->vm, irq_num);
250 /* Only one byte is read per irq
251 * So if the queue is still full after a data read, we re-raise the irq
252 * If we keep reading an empty queue we return the last queue entry
255 static int push_to_output_queue(struct vm_device * dev, uint8_t value, uint8_t cmd, uint8_t mouse) {
256 struct keyboard_internal * state = (struct keyboard_internal *)(dev->private_data);
257 struct queue * q = NULL;
261 q = &(state->mouse_queue);
263 q = &(state->kbd_queue);
266 if (q->count == QUEUE_SIZE) {
271 state->status.cmd = 1;
273 state->status.cmd = 0;
276 q->queue[q->end++] = value;
287 static int pull_from_output_queue(struct vm_device * dev, uint8_t * value) {
288 struct keyboard_internal * state = (struct keyboard_internal *)(dev->private_data);
289 struct queue * q = NULL;
291 if (state->kbd_queue.count > 0) {
292 q = &(state->kbd_queue);
293 PrintDebug("Reading from Keyboard Queue\n");
294 } else if (state->mouse_queue.count > 0) {
295 q = &(state->mouse_queue);
296 PrintDebug("Reading from Mouse Queue\n");
298 uint8_t idx = state->kbd_queue.start - 1;
299 PrintDebug("No Data in any queue\n");
300 *value = state->kbd_queue.queue[idx];
304 *value = q->queue[q->start++];
308 PrintDebug("Read from Queue: %x\n", *value);
309 PrintDebug("QStart=%d, QEnd=%d\n", q->start, q->end);
319 static int key_event_handler(struct guest_info * info,
320 struct v3_keyboard_event * evt,
321 void * private_data) {
322 struct vm_device * dev = (struct vm_device *)private_data;
323 struct keyboard_internal *state = (struct keyboard_internal *)(dev->private_data);
325 PrintDebug("keyboard: injected status 0x%x, and scancode 0x%x\n", evt->status, evt->scan_code);
327 if (evt->scan_code == 0x44) { // F10 debug dump
328 v3_print_guest_state(info);
329 // PrintGuestPageTables(info, info->shdw_pg_state.guest_cr3);
330 } else if (evt->scan_code == 0x43) { // F9 Sym test
331 PrintDebug("Testing sym call\n");
332 v3_sym_call5(info, SYMCALL_TEST, 0x1111, 0x2222, 0x3333, 0x4444, 0x5555, NULL, NULL);
333 } else if (evt->scan_code == 0x42) { // F8 Sym test2
334 PrintDebug("Testing sym call\n");
335 v3_sym_call1(info, SYMCALL_MEM_LOOKUP, 0, NULL, NULL);
340 addr_t irq_state = v3_lock_irqsave(state->kb_lock);
342 if ( (state->status.enabled == 1) // onboard is enabled
343 && (state->cmd.disable == 0) ) { // keyboard is enabled
345 push_to_output_queue(dev, evt->scan_code, DATA, KEYBOARD);
348 v3_unlock_irqrestore(state->kb_lock, irq_state);
354 static int mouse_event_handler(struct guest_info * info,
355 struct v3_mouse_event * evt,
356 void * private_data) {
357 struct vm_device * dev = (struct vm_device *)private_data;
358 struct keyboard_internal * state = (struct keyboard_internal *)(dev->private_data);
361 PrintDebug("keyboard: injected mouse packet 0x %x %x %x\n",
362 evt->data[0], evt->data[1], evt->data[2]);
364 addr_t irq_state = v3_lock_irqsave(state->kb_lock);
366 switch (state->mouse_state) {
369 if (state->cmd.mouse_disable == 0) {
370 push_to_output_queue(dev, evt->data[0], DATA, MOUSE);
371 push_to_output_queue(dev, evt->data[1], DATA, MOUSE);
372 push_to_output_queue(dev, evt->data[2], DATA, MOUSE);
376 PrintError("Invalid mouse state\n");
382 v3_unlock_irqrestore(state->kb_lock, irq_state);
388 static int keyboard_reset_device(struct vm_device * dev) {
389 struct keyboard_internal * data = (struct keyboard_internal *)(dev->private_data);
391 memset(data, 0, sizeof(struct keyboard_internal));
393 data->state = NORMAL;
394 data->mouse_state = STREAM;
397 // PS2, keyboard+mouse enabled, generic translation
400 data->cmd.irq_en = 1;
401 data->cmd.mouse_irq_en = 1;
402 data->cmd.self_test_ok = 1;
406 // buffers empty, no errors
407 data->status.val = 0;
409 data->status.self_test_ok = 1; // self-tests passed
410 data->status.enabled = 1;// keyboard ready
414 data->output_byte = 0; // ?
416 data->input_byte = INPUT_RAM; // we have some
417 // also display=color, jumper 0, keyboard enabled
419 PrintDebug("keyboard: reset device\n");
427 static int keyboard_start_device(struct vm_device * dev) {
428 PrintDebug("keyboard: start device\n");
433 static int keyboard_stop_device(struct vm_device * dev) {
434 PrintDebug("keyboard: stop device\n");
440 static int mouse_write_output(struct vm_device * dev, uint8_t data) {
441 struct keyboard_internal * state = (struct keyboard_internal *)(dev->private_data);
443 switch (state->mouse_state) {
448 if (state->mouse_enabled == 0) {
449 push_to_output_queue(dev, 0xfe, DATA, MOUSE) ; // no mouse!
451 push_to_output_queue(dev, MOUSE_ACK, DATA, MOUSE) ;
452 push_to_output_queue(dev, 0xaa, DATA, MOUSE) ;
453 push_to_output_queue(dev, 0x00, DATA, MOUSE) ;
457 /* case 0xfe: //resend */
458 /* PushToOutputQueue(dev, 0xfa, OVERWRITE, DATA, MOUSE) ; */
459 /* PrintDebug(" mouse resend begins "); */
460 /* state->mouse_done_after_ack = 0; */
461 /* state->mouse_needs_ack = 0; */
462 /* state->mouse_state = STREAM1; */
463 /* return 0; // not done */
466 case 0xf6: // set defaults
467 push_to_output_queue(dev, MOUSE_ACK, DATA, MOUSE) ;
468 PrintDebug(" mouse set defaults ");
472 case 0xf5: // disable data reporting
473 push_to_output_queue(dev, MOUSE_ACK, DATA, MOUSE) ;
474 PrintDebug(" mouse disable data reporting ");
477 case 0xf4: // enable data reporting
478 push_to_output_queue(dev, MOUSE_ACK, DATA, MOUSE) ;
479 PrintDebug(" mouse enable data reporting ");
482 case 0xf3: // set sample rate
483 push_to_output_queue(dev, MOUSE_ACK, DATA, MOUSE) ;
484 state->mouse_state = SAMPLE;
485 PrintDebug(" mouse set sample rate begins ");
488 case 0xf2: // get device id
489 push_to_output_queue(dev, MOUSE_ACK, DATA, MOUSE) ;
490 push_to_output_queue(dev, 0x0, DATA, MOUSE);
491 PrintDebug(" mouse get device id begins ");
494 case 0xf0: // set remote mode
495 push_to_output_queue(dev, MOUSE_ACK, DATA, MOUSE) ;
496 PrintDebug(" mouse set remote mode ");
499 case 0xee: // set wrap mode
500 push_to_output_queue(dev, MOUSE_ACK, DATA, MOUSE) ;
501 PrintError(" mouse set wrap mode (ignored) ");
504 case 0xec: // reset wrap mode
505 push_to_output_queue(dev, MOUSE_ACK, DATA, MOUSE) ;
506 PrintError(" mouse reset wrap mode (ignored) ");
509 case 0xeb: // read data
510 push_to_output_queue(dev, MOUSE_ACK, DATA, MOUSE) ;
511 PrintError(" mouse switch to wrap mode (ignored) ");
514 case 0xea: // set stream mode
515 push_to_output_queue(dev, MOUSE_ACK, DATA, MOUSE) ;
516 PrintDebug(" mouse set stream mode ");
519 case 0xe9: // status request
520 push_to_output_queue(dev, MOUSE_ACK, DATA, MOUSE) ;
521 push_to_output_queue(dev, 0x00, DATA, MOUSE);
522 push_to_output_queue(dev, 0x00, DATA, MOUSE);
523 push_to_output_queue(dev, 0x00, DATA, MOUSE);
524 PrintDebug(" mouse status request begins ");
527 case 0xe8: // set resolution
528 push_to_output_queue(dev, MOUSE_ACK, DATA, MOUSE) ;
529 PrintDebug(" mouse set resolution begins ");
530 state->mouse_state = SET_RES;
533 case 0xe7: // set scaling 2:1
534 push_to_output_queue(dev, MOUSE_ACK, DATA, MOUSE) ;
535 PrintDebug(" mouse set scaling 2:1 ");
538 case 0xe6: // set scaling 1:1
539 push_to_output_queue(dev, MOUSE_ACK, DATA, MOUSE) ;
540 PrintDebug(" mouse set scaling 1:1 ");
544 PrintDebug(" receiving unknown mouse command (0x%x) in acceptable state ", data);
552 PrintDebug(" receiving mouse output in unhandled state (0x%x) ", state->mouse_state);
561 #if KEYBOARD_DEBUG_80H
562 static int keyboard_write_delay(ushort_t port, void * src, uint_t length, struct vm_device * dev) {
565 PrintDebug("keyboard: write of 0x%x to 80h\n", *((uint8_t*)src));
568 PrintDebug("keyboard: write of >1 byte to 80h\n", *((uint8_t*)src));
573 static int keyboard_read_delay(ushort_t port, void * dest, uint_t length, struct vm_device * dev) {
576 *(uint8_t *)dest = v3_inb(port);
578 PrintDebug("keyboard: read of 0x%x from 80h\n", *((uint8_t*)dest));
582 PrintDebug("keyboard: read of >1 byte from 80h\n");
593 static int keyboard_write_command(ushort_t port, void * src, uint_t length, struct vm_device * dev) {
594 struct keyboard_internal * state = (struct keyboard_internal *)(dev->private_data);
595 uint8_t cmd = *(uint8_t *)src;
597 // Should always be single byte write
599 PrintError("keyboard: write of >1 bytes (%d) to 64h\n", length);
604 addr_t irq_state = v3_lock_irqsave(state->kb_lock);
606 if (state->state != NORMAL) {
607 PrintDebug("keyboard: warning - receiving command on 64h but state != NORMAL\n");
610 PrintDebug("keyboard: command 0x%x on 64h\n", cmd);
613 case 0x20: // READ COMMAND BYTE (returned in 60h)
614 push_to_output_queue(dev, state->cmd.val, COMMAND, KEYBOARD);
615 PrintDebug("keyboard: command byte 0x%x returned\n", state->cmd.val);
618 case 0x60: // WRITE COMMAND BYTE (read from 60h)
619 state->state = WRITING_CMD_BYTE; // we need to make sure we send the next 0x60 byte appropriately
620 PrintDebug("keyboard: prepare to write command byte\n");
623 // case 0x90-9f - write to output port (?)
625 case 0xa1: // Get version number
626 push_to_output_queue(dev, 0x00, COMMAND, KEYBOARD);
627 PrintDebug("keyboard: version number 0x0 returned\n");
630 case 0xa4: // is password installed? send result to 0x60
631 // we don't support passwords
632 push_to_output_queue(dev, 0xf1, COMMAND, KEYBOARD);
633 PrintDebug("keyboard: password not installed\n");
636 case 0xa5: // new password will arrive on 0x60
637 state->state = TRANSMIT_PASSWD;
638 PrintDebug("keyboard: pepare to transmit password\n");
641 case 0xa6: // check passwd;
642 // since we do not support passwords, we will simply ignore this
643 // the implication is that any password check immediately succeeds
644 // with a blank password
645 PrintDebug("keyboard: password check succeeded\n");
648 case 0xa7: // disable mouse
649 state->cmd.mouse_disable = 1;
650 PrintDebug("keyboard: mouse disabled\n");
653 case 0xa8: // enable mouse
654 state->cmd.mouse_disable = 0;
655 PrintDebug("keyboard: mouse enabled\n");
658 case 0xa9: // mouse interface test (always succeeds)
659 push_to_output_queue(dev, 0x00, COMMAND, KEYBOARD);
660 PrintDebug("keyboard: mouse interface test succeeded\n");
663 case 0xaa: // controller self test (always succeeds)
664 push_to_output_queue(dev, 0x55, COMMAND, KEYBOARD);
665 PrintDebug("keyboard: controller self test succeeded\n");
668 case 0xab: // keyboard interface test (always succeeds)
669 push_to_output_queue(dev, 0, COMMAND, KEYBOARD);
670 PrintDebug("keyboard: keyboard interface test succeeded\n");
673 case 0xad: // disable keyboard
674 state->cmd.disable = 1;
675 PrintDebug("keyboard: keyboard disabled\n");
678 case 0xae: // enable keyboard
679 state->cmd.disable = 0;
680 PrintDebug("keyboard: keyboard enabled\n");
683 case 0xaf: // get version
684 push_to_output_queue(dev, 0x00, COMMAND, KEYBOARD);
685 PrintDebug("keyboard: version 0 returned \n");
688 case 0xd0: // return microcontroller output on 60h
689 push_to_output_queue(dev, state->output_byte, COMMAND, KEYBOARD);
690 PrintDebug("keyboard: output byte 0x%x returned\n", state->output_byte);
693 case 0xd1: // request to write next byte on 60h to the microcontroller output port
694 state->state = WRITING_OUTPUT_PORT;
695 PrintDebug("keyboard: prepare to write output byte\n");
698 case 0xd2: // write keyboard buffer (inject key)
699 state->state = INJECTING_KEY;
700 PrintDebug("keyboard: prepare to inject key\n");
703 case 0xd3: // write mouse buffer (inject mouse)
704 state->state = INJECTING_MOUSE;
705 PrintDebug("keyboard: prepare to inject mouse\n");
708 case 0xd4: // write mouse device (command to mouse?)
709 state->state = IN_MOUSE;
710 PrintDebug("keyboard: prepare to inject mouse command\n");
713 case 0xc0: // read input port
714 push_to_output_queue(dev, state->input_byte, COMMAND, KEYBOARD);
715 PrintDebug("keyboard: input byte 0x%x returned\n", state->input_byte);
718 case 0xc1: //copy input port lsn to status msn
719 state->status.val &= 0x0f;
720 state->status.val |= (state->input_byte & 0xf) << 4;
721 PrintDebug("keyboard: copied input byte low 4 bits to status reg hi 4 bits\n");
724 case 0xc2: // copy input port msn to status msn
725 state->status.val &= 0x0f;
726 state->status.val |= (state->input_byte & 0xf0);
727 PrintDebug("keyboard: copied input byte hi 4 bits to status reg hi 4 bits\n");
730 case 0xe0: // read test port
731 push_to_output_queue(dev, state->output_byte >> 6, COMMAND, KEYBOARD);
732 PrintDebug("keyboard: read 0x%x from test port\n", state->output_byte >> 6);
736 case 0xf0: // pulse output port
737 case 0xf1: // this should pulse 0..3 of cmd_byte on output port
738 case 0xf2: // instead of what is currently in output_byte (I think)
739 case 0xf3: // main effect is taht if bit zero is zero
740 case 0xf4: // should cause reset
741 case 0xf5: // I doubt anything more recent than a 286 running
742 case 0xf6: // OS2 with the penalty box will care
752 PrintDebug("keyboard: ignoring pulse of 0x%x (low=pulsed) on output port\n", (cmd & 0xf));
755 // case ac diagonstic - returns 16 bytes from keyboard microcontroler on 60h
757 PrintDebug("keyboard: ignoring command (unimplemented)\n");
761 v3_unlock_irqrestore(state->kb_lock, irq_state);
766 static int keyboard_read_status(ushort_t port, void * dest, uint_t length, struct vm_device * dev) {
767 struct keyboard_internal *state = (struct keyboard_internal *)(dev->private_data);
770 PrintError("keyboard: >1 byte read for status (64h)\n");
774 PrintDebug("keyboard: read status (64h): ");
776 addr_t irq_state = v3_lock_irqsave(state->kb_lock);
778 *(uint8_t *)dest = state->status.val;
780 v3_unlock_irqrestore(state->kb_lock, irq_state);
782 PrintDebug("0x%x\n", *(uint8_t *)dest);
787 static int keyboard_write_output(ushort_t port, void * src, uint_t length, struct vm_device * dev) {
788 struct keyboard_internal *state = (struct keyboard_internal *)(dev->private_data);
792 PrintError("keyboard: write of 60h with >1 byte\n");
796 uint8_t data = *(uint8_t *)src;
798 PrintDebug("keyboard: output 0x%x on 60h\n", data);
800 addr_t irq_state = v3_lock_irqsave(state->kb_lock);
802 switch (state->state) {
803 case WRITING_CMD_BYTE:
804 state->cmd.val = data;
805 state->state = NORMAL;
806 PrintDebug("keyboard: wrote new command byte 0x%x\n", state->cmd.val);
809 case WRITING_OUTPUT_PORT:
810 state->output_byte = data;
811 state->state = NORMAL;
812 PrintDebug("keyboard: wrote new output byte 0x%x\n", state->output_byte);
816 push_to_output_queue(dev, data, COMMAND, KEYBOARD); // probably should be a call to deliver_key_to_vmm()
817 state->state = NORMAL;
818 PrintDebug("keyboard: injected key 0x%x\n", data);
821 case INJECTING_MOUSE:
822 push_to_output_queue(dev, data, DATA, MOUSE);
823 // PrintDebug("keyboard: ignoring injected mouse event 0x%x\n", data);
824 PrintDebug("keyboard: injected mouse event 0x%x\n", data);
825 state->state = NORMAL;
829 PrintDebug("keyboard: mouse action: ");
830 if (mouse_write_output(dev, data)) {
831 state->state = NORMAL;
836 case TRANSMIT_PASSWD:
839 PrintDebug("keyboard: ignoring password character 0x%x\n",data);
842 state->state = NORMAL;
843 PrintDebug("keyboard: done with password\n");
848 PrintDebug("Keyboard: LEDs being set...\n");
849 push_to_output_queue(dev, 0xfa, COMMAND, KEYBOARD);
850 state->state = NORMAL;
854 PrintDebug("Keyboard: Rate being set...\n");
855 push_to_output_queue(dev, 0xfa, COMMAND, KEYBOARD);
856 state->state = NORMAL;
861 // command is being sent to keyboard controller
864 push_to_output_queue(dev, 0xfa, COMMAND, KEYBOARD); // ack
865 push_to_output_queue(dev, 0xaa, COMMAND, KEYBOARD);
866 PrintDebug("keyboard: reset complete and acked\n");
869 case 0xf5: // disable scanning
870 case 0xf4: // enable scanning
872 push_to_output_queue(dev, 0xfa, COMMAND, KEYBOARD);
873 // should do something here... PAD
874 PrintDebug("keyboard: %s scanning done and acked\n", (data == 0xf5) ? "disable" : "enable");
878 push_to_output_queue(dev, 0xfa, COMMAND, KEYBOARD);
879 state->state = SET_RATE;
882 case 0xf2: // get keyboard ID
883 push_to_output_queue(dev, 0xfa, COMMAND, KEYBOARD);
884 push_to_output_queue(dev, 0xab, COMMAND, KEYBOARD);
885 push_to_output_queue(dev, 0x83, COMMAND, KEYBOARD);
886 PrintDebug("Keyboard: Requesting Keyboard ID\n");
889 case 0xed: // enable keyboard LEDs
890 push_to_output_queue(dev, 0xfa, COMMAND, KEYBOARD);
891 state->state = SET_LEDS;
895 case 0xfd: // set key type make
896 case 0xfc: // set key typ make/break
897 case 0xfb: // set key type typematic
898 case 0xfa: // set all typematic make/break/typematic
899 case 0xf9: // set all make
900 case 0xf8: // set all make/break
901 case 0xf7: // set all typemaktic
902 case 0xf6: // set defaults
903 PrintError("keyboard: unhandled known command 0x%x on output buffer (60h)\n", data);
908 PrintError("keyboard: unhandled unknown command 0x%x on output buffer (60h)\n", data);
909 state->status.out_buf_full = 1;
917 v3_unlock_irqrestore(state->kb_lock, irq_state);
922 static int keyboard_read_input(ushort_t port, void * dest, uint_t length, struct vm_device * dev) {
923 struct keyboard_internal * state = (struct keyboard_internal *)(dev->private_data);
926 PrintError("keyboard: unknown size read from input (60h)\n");
930 addr_t irq_state = v3_lock_irqsave(state->kb_lock);
932 pull_from_output_queue(dev, (uint8_t *)dest);
934 v3_unlock_irqrestore(state->kb_lock, irq_state);
936 PrintDebug("keyboard: read from input (60h): 0x%x\n", *(uint8_t *)dest);
946 static int keyboard_free(struct vm_device * dev) {
948 v3_dev_unhook_io(dev, KEYBOARD_60H);
949 v3_dev_unhook_io(dev, KEYBOARD_64H);
950 #if KEYBOARD_DEBUG_80H
951 v3_dev_unhook_io(dev, KEYBOARD_DELAY_80H);
953 keyboard_reset_device(dev);
961 static struct v3_device_ops dev_ops = {
962 .free = keyboard_free,
963 .reset = keyboard_reset_device,
964 .start = keyboard_start_device,
965 .stop = keyboard_stop_device,
971 static int keyboard_init(struct guest_info * vm, void * cfg_data) {
972 struct keyboard_internal * keyboard_state = NULL;
975 PrintDebug("keyboard: init_device\n");
977 keyboard_state = (struct keyboard_internal *)V3_Malloc(sizeof(struct keyboard_internal));
979 keyboard_state->mouse_queue.start = 0;
980 keyboard_state->mouse_queue.end = 0;
981 keyboard_state->mouse_queue.count = 0;
983 keyboard_state->kbd_queue.start = 0;
984 keyboard_state->kbd_queue.end = 0;
985 keyboard_state->kbd_queue.count = 0;
987 keyboard_state->mouse_enabled = 0;
989 struct vm_device * dev = v3_allocate_device("KEYBOARD", &dev_ops, keyboard_state);
991 if (v3_attach_device(vm, dev) == -1) {
992 PrintError("Could not attach device %s\n", "KEYBOARD");
997 keyboard_reset_device(dev);
1000 v3_lock_init(&(keyboard_state->kb_lock));
1004 v3_dev_hook_io(dev, KEYBOARD_64H, &keyboard_read_status, &keyboard_write_command);
1005 v3_dev_hook_io(dev, KEYBOARD_60H, &keyboard_read_input, &keyboard_write_output);
1007 v3_hook_host_event(vm, HOST_KEYBOARD_EVT, V3_HOST_EVENT_HANDLER(key_event_handler), dev);
1008 v3_hook_host_event(vm, HOST_MOUSE_EVT, V3_HOST_EVENT_HANDLER(mouse_event_handler), dev);
1011 #if KEYBOARD_DEBUG_80H
1012 v3_dev_hook_io(dev, KEYBOARD_DELAY_80H, &keyboard_read_delay, &keyboard_write_delay);
1017 // We do not hook the IRQ here. Instead, the underlying device driver
1018 // is responsible to call us back
1025 device_register("KEYBOARD", keyboard_init)