X-Git-Url: http://v3vee.org/palacios/gitweb/gitweb.cgi?p=palacios.git;a=blobdiff_plain;f=palacios%2Fsrc%2Fpalacios%2Fvmm_config.c;h=e4c9b4fabc6e3bc89256fb3976ce2e61c12c7340;hp=ed54ab5b1dc61aba1d4ef491f4366d76343308aa;hb=88a3605446744969abe6f193a7bc20e62d5aa555;hpb=3a4e54ec208ea3589963b410d2d73292bbc4a8fe diff --git a/palacios/src/palacios/vmm_config.c b/palacios/src/palacios/vmm_config.c index ed54ab5..e4c9b4f 100644 --- a/palacios/src/palacios/vmm_config.c +++ b/palacios/src/palacios/vmm_config.c @@ -26,462 +26,779 @@ #include #include #include +#include +#include +#include +#include +#include + -#ifdef CONFIG_SYMBIOTIC_SWAP -#include +#ifdef V3_CONFIG_SWAPPING +#include #endif -#include -#include -#include -#include -#include -#include +#ifdef V3_CONFIG_MULTIBOOT +#include +#endif -#include -#include +#ifdef V3_CONFIG_HVM +#include +#endif +#include +#include +#include "vmm_config_class.h" -#include +/* The Palacios cookie encodes "v3vee" followed by a + 3 byte version code. There are currently two versions: + + \0\0\0 => original (no checksum) + \0\0\1 => checksum +*/ +#define COOKIE_LEN 8 +#define COOKIE_V0 "v3vee\0\0\0" +#define COOKIE_V1 "v3vee\0\0\1" + +// This is used to access the configuration file index table +struct file_hdr_v0 { + uint32_t index; + uint32_t size; + uint64_t offset; +}; + +struct file_hdr_v1 { + uint32_t index; + uint32_t size; + uint64_t offset; + ulong_t hash; +}; +struct file_idx_table_v0 { + uint64_t num_files; + struct file_hdr_v0 hdrs[0]; +}; -#include +struct file_idx_table_v1 { + uint64_t num_files; + struct file_hdr_v1 hdrs[0]; +}; -static int setup_memory_map(struct guest_info * info, struct v3_vm_config * config_ptr); -static int setup_devices(struct guest_info * info, struct v3_vm_config * config_ptr); -static int configure_generic(struct guest_info * info, struct v3_vm_config * config_ptr); +static int setup_memory_map(struct v3_vm_info * vm, v3_cfg_tree_t * cfg); +static int setup_extensions(struct v3_vm_info * vm, v3_cfg_tree_t * cfg); +static int setup_devices(struct v3_vm_info * vm, v3_cfg_tree_t * cfg); -#ifdef CONFIG_PASSTHROUGH_VIDEO -static int passthrough_mem_write(addr_t guest_addr, void * src, uint_t length, void * priv_data) { - return length; - // memcpy((void*)guest_addr, src, length); - PrintDebug("Write of %d bytes to %p\n", length, (void *)guest_addr); - PrintDebug("Write Value = %p\n", (void *)*(addr_t *)src); + +char * v3_cfg_val(v3_cfg_tree_t * tree, char * tag) { + char * attrib = (char *)v3_xml_attr(tree, tag); + v3_cfg_tree_t * child_entry = v3_xml_child(tree, tag); + char * val = NULL; + + if ((child_entry != NULL) && (attrib != NULL)) { + PrintError(VM_NONE, VCORE_NONE, "Duplicate Configuration parameters present for %s\n", tag); + return NULL; + } + + if (attrib == NULL) { + val = v3_xml_txt(child_entry); + + if ( val[0] == 0 ) + val = NULL; + } else { + val = attrib; + } - return length; + return val; } -#endif -int v3_pre_config_guest(struct guest_info * info, struct v3_vm_config * config_ptr) { - extern v3_cpu_arch_t v3_cpu_types[]; +v3_cfg_tree_t * v3_cfg_subtree(v3_cfg_tree_t * tree, char * tag) { + return v3_xml_child(tree, tag); +} - // Amount of ram the Guest will have, rounded to a 4K page boundary - info->mem_size = config_ptr->mem_size & ~(addr_t)0xfff; +v3_cfg_tree_t * v3_cfg_next_branch(v3_cfg_tree_t * tree) { + return v3_xml_next(tree); +} - info->cpu_id = config_ptr->guest_cpu; - /* - * Initialize the subsystem data strutures - */ -#ifdef CONFIG_TELEMETRY - // This should go first, because other subsystems will depend on the guest_info flag - if (config_ptr->enable_telemetry) { - info->enable_telemetry = 1; - v3_init_telemetry(info); + +struct v3_cfg_file * v3_cfg_get_file(struct v3_vm_info * vm, char * tag) { + struct v3_cfg_file * file = NULL; + + file = (struct v3_cfg_file *)v3_htable_search(vm->cfg_data->file_table, (addr_t)tag); + + return file; +} + + +static uint_t file_hash_fn(addr_t key) { + char * name = (char *)key; + return v3_hash_buffer((uchar_t *)name, strlen(name)); +} + +static int file_eq_fn(addr_t key1, addr_t key2) { + char * name1 = (char *)key1; + char * name2 = (char *)key2; + + return (strcmp(name1, name2) == 0); +} + +static struct v3_config * parse_config(void * cfg_blob) { + struct v3_config * cfg = NULL; + int offset = 0; + uint_t xml_len = 0; + struct file_idx_table_v0 * files_v0 = NULL; + struct file_idx_table_v1 * files_v1 = NULL; + v3_cfg_tree_t * file_tree = NULL; + int version=-1; + + V3_Print(VM_NONE, VCORE_NONE, "cfg data at %p\n", cfg_blob); + + if (memcmp(cfg_blob, COOKIE_V0, COOKIE_LEN) == 0) { + version = 0; + } else if (memcmp(cfg_blob, COOKIE_V1, COOKIE_LEN) == 0) { + version = 1; } else { - info->enable_telemetry = 0; - } -#endif + PrintError(VM_NONE, VCORE_NONE, "Invalid Configuration Header Or Unknown Version\n"); + return NULL; + } - v3_init_time(info); - v3_init_io_map(info); - v3_init_msr_map(info); - v3_init_interrupt_state(info); - v3_init_exception_state(info); - v3_init_dev_mgr(info); - v3_init_host_events(info); + V3_Print(VM_NONE, VCORE_NONE, "Handling Palacios Image Format, Version 0x%x\n",version); + offset += COOKIE_LEN; - v3_init_decoder(info); - - v3_init_hypercall_map(info); + cfg = (struct v3_config *)V3_Malloc(sizeof(struct v3_config)); -#ifdef CONFIG_SYMBIOTIC_SWAP - v3_init_sym_swap(info); -#endif + if (!cfg) { + PrintError(VM_NONE, VCORE_NONE, "Unable to allocate while parsing\n"); + return NULL; + } + memset(cfg, 0, sizeof(struct v3_config)); + cfg->blob = cfg_blob; + INIT_LIST_HEAD(&(cfg->file_list)); + cfg->file_table = v3_create_htable(0, file_hash_fn, file_eq_fn); - // Initialize the memory map - v3_init_shadow_map(info); + if (!(cfg->file_table)) { + PrintError(VM_NONE, VCORE_NONE, "Unable to allocate hash table while parsing\n"); + V3_Free(cfg); + return NULL; + } - if ((v3_cpu_types[info->cpu_id] == V3_SVM_REV3_CPU) && - (config_ptr->enable_nested_paging == 1)) { - PrintDebug("Guest Page Mode: NESTED_PAGING\n"); - info->shdw_pg_mode = NESTED_PAGING; + xml_len = *(uint32_t *)(cfg_blob + offset); + offset += 4; + + cfg->cfg = (v3_cfg_tree_t *)v3_xml_parse((uint8_t *)(cfg_blob + offset)); + offset += xml_len; + + offset += 8; + + // This is hideous, but the file formats are still very close + if (version==0) { + files_v0 = (struct file_idx_table_v0 *)(cfg_blob + offset); + V3_Print(VM_NONE, VCORE_NONE, "Number of files in cfg: %d\n", (uint32_t)(files_v0->num_files)); } else { - PrintDebug("Guest Page Mode: SHADOW_PAGING\n"); - v3_init_shadow_page_state(info); - info->shdw_pg_mode = SHADOW_PAGING; + files_v1 = (struct file_idx_table_v1 *)(cfg_blob + offset); + V3_Print(VM_NONE, VCORE_NONE, "Number of files in cfg: %d\n", (uint32_t)(files_v1->num_files)); } + file_tree = v3_cfg_subtree(v3_cfg_subtree(cfg->cfg, "files"), "file"); + + while (file_tree) { + char * id = v3_cfg_val(file_tree, "id"); + char * index = v3_cfg_val(file_tree, "index"); + int idx = atoi(index); + struct v3_cfg_file * file = NULL; + + file = (struct v3_cfg_file *)V3_Malloc(sizeof(struct v3_cfg_file)); + + if (!file) { + PrintError(VM_NONE, VCORE_NONE, "Could not allocate file structure\n"); + v3_free_htable(cfg->file_table,0,0); + V3_Free(cfg); + return NULL; + } + + V3_Print(VM_NONE, VCORE_NONE, "File index=%d id=%s\n", idx, id); + + strncpy(file->tag, id, V3_MAX_TAG_LEN); + file->tag[V3_MAX_TAG_LEN-1] = 0 ; + + if (version==0) { + struct file_hdr_v0 * hdr = &(files_v0->hdrs[idx]); + + file->size = hdr->size; + file->data = cfg_blob + hdr->offset; + file->hash = 0; + + V3_Print(VM_NONE, VCORE_NONE, "Storing file data offset = %d, size=%d\n", (uint32_t)hdr->offset, hdr->size); + V3_Print(VM_NONE, VCORE_NONE, "file data at %p\n", file->data); + + } else if (version==1) { + struct file_hdr_v1 * hdr = &(files_v1->hdrs[idx]); + unsigned long hash; + + file->size = hdr->size; + file->data = cfg_blob + hdr->offset; + file->hash = hdr->hash; + + V3_Print(VM_NONE, VCORE_NONE, "Storing file data offset = %d, size=%d\n", (uint32_t)hdr->offset, hdr->size); + V3_Print(VM_NONE, VCORE_NONE, "file data at %p\n", file->data); + V3_Print(VM_NONE, VCORE_NONE, "Checking file data integrity...\n"); + if ((hash = v3_hash_buffer(file->data, file->size)) != file->hash) { + PrintError(VM_NONE, VCORE_NONE, "File data corrupted! (orig hash=0x%lx, new=0x%lx\n", + file->hash, hash); + return NULL; + } + V3_Print(VM_NONE, VCORE_NONE, "File data OK\n"); + + } + + + list_add( &(file->file_node), &(cfg->file_list)); - if (config_ptr->schedule_freq == 0) { - // set the schedule frequency to 100 HZ - config_ptr->schedule_freq = 100; + V3_Print(VM_NONE, VCORE_NONE, "Keying file to name\n"); + v3_htable_insert(cfg->file_table, (addr_t)(file->tag), (addr_t)(file)); + + V3_Print(VM_NONE, VCORE_NONE, "Iterating to next file\n"); + + file_tree = v3_cfg_next_branch(file_tree); } - PrintDebug("CPU_KHZ = %d, schedule_freq=%p\n", V3_CPU_KHZ(), (void *)config_ptr->schedule_freq); + V3_Print(VM_NONE, VCORE_NONE, "Configuration parsed successfully\n"); + + return cfg; +} + + +static inline uint32_t get_alignment(char * align_str) { + // default is 4KB alignment + uint32_t alignment = PAGE_SIZE_4KB; - info->yield_cycle_period = (V3_CPU_KHZ() * 1000) / config_ptr->schedule_freq; + if (align_str != NULL) { + if (strcasecmp(align_str, "2MB") == 0) { + alignment = PAGE_SIZE_2MB; + } else if (strcasecmp(align_str, "4MB") == 0) { + alignment = PAGE_SIZE_4MB; + } + } - // Initial CPU operating mode - info->cpu_mode = REAL; - info->mem_mode = PHYSICAL_MEM; +#ifndef V3_CONFIG_ALIGNED_PG_ALLOC + if (alignment != PAGE_SIZE_4KB) { + PrintError(VM_NONE, VCORE_NONE, "Aligned page allocations are not supported in this host (requested alignment=%d)\n", alignment); + PrintError(VM_NONE, VCORE_NONE, "Ignoring alignment request\n"); + alignment = PAGE_SIZE_4KB; + } +#endif - return 0; + return alignment; } -int v3_post_config_guest(struct guest_info * info, struct v3_vm_config * config_ptr) { - // Configure the memory map for the guest - if (setup_memory_map(info, config_ptr) == -1) { - PrintError("Setting up guest memory map failed...\n"); +static int pre_config_vm(struct v3_vm_info * vm, v3_cfg_tree_t * vm_cfg) { + char * memory_str = v3_cfg_val(vm_cfg, "memory"); + char * schedule_hz_str = v3_cfg_val(vm_cfg, "schedule_hz"); + char * vm_class = v3_cfg_val(vm_cfg, "class"); + char * align_str = v3_cfg_val(v3_cfg_subtree(vm_cfg, "memory"), "alignment"); + uint32_t sched_hz = 100; // set the schedule frequency to 100 HZ + + + if (!memory_str) { + PrintError(VM_NONE, VCORE_NONE, "Memory is a required configuration parameter\n"); return -1; } - //v3_hook_io_port(info, 1234, &IO_Read, NULL, info); - - if (setup_devices(info, config_ptr) == -1) { - PrintError("Failed to setup devices\n"); + PrintDebug(VM_NONE, VCORE_NONE, "Memory=%s\n", memory_str); + if (align_str) { + PrintDebug(VM_NONE, VCORE_NONE, "Alignment=%s\n", align_str); + } else { + PrintDebug(VM_NONE, VCORE_NONE, "Alignment defaulted to 4KB.\n"); + } + + // Amount of ram the Guest will have, always in MB + vm->mem_size = (addr_t)atoi(memory_str) * 1024 * 1024; + vm->mem_align = get_alignment(align_str); + + // set up defaults for memory management for threads associated + // with this VM + vm->resource_control.pg_alignment=vm->mem_align; + vm->resource_control.pg_node_id=-1; + +#ifdef V3_CONFIG_SWAPPING + if (v3_init_swapping_vm(vm,vm_cfg)) { + PrintError(vm,VCORE_NONE,"Unable to initialize swapping correctly\n"); return -1; } + if (vm->swap_state.enable_swapping) { + PrintDebug(vm,VCORE_NONE,"Swapping enabled\n"); + } else { + PrintDebug(vm,VCORE_NONE,"Swapping disabled\n"); + } +#endif + + PrintDebug(VM_NONE, VCORE_NONE, "Alignment for %lu bytes of memory computed as 0x%x\n", vm->mem_size, vm->mem_align); - info->run_state = VM_STOPPED; + if (strcasecmp(vm_class, "PC") == 0) { + vm->vm_class = V3_PC_VM; + } else { + PrintError(VM_NONE, VCORE_NONE, "Invalid VM class\n"); + return -1; + } - info->vm_regs.rdi = 0; - info->vm_regs.rsi = 0; - info->vm_regs.rbp = 0; - info->vm_regs.rsp = 0; - info->vm_regs.rbx = 0; - info->vm_regs.rdx = 0; - info->vm_regs.rcx = 0; - info->vm_regs.rax = 0; +#ifdef V3_CONFIG_TELEMETRY + { + char * telemetry = v3_cfg_val(vm_cfg, "telemetry"); + // This should go first, because other subsystems will depend on the guest_info flag + if ((telemetry) && (strcasecmp(telemetry, "enable") == 0)) { + vm->enable_telemetry = 1; + } else { + vm->enable_telemetry = 0; + } + } +#endif + + if (v3_init_vm(vm) == -1) { + PrintError(VM_NONE, VCORE_NONE, "Failed to initialize VM\n"); + return -1; + } + +#ifdef V3_CONFIG_MULTIBOOT + if (v3_init_multiboot_vm(vm,vm_cfg)) { + PrintError(vm,VCORE_NONE,"Cannot initialize Multiboot for VM\n"); + return -1; + } +#endif +#ifdef V3_CONFIG_HVM + if (v3_init_hvm_vm(vm,vm_cfg)) { + PrintError(vm,VCORE_NONE,"Cannot initialize HVM for VM\n"); + return -1; + } +#endif + + if (schedule_hz_str) { + sched_hz = atoi(schedule_hz_str); + } + + PrintDebug(VM_NONE, VCORE_NONE, "CPU_KHZ = %d, schedule_freq=%p\n", V3_CPU_KHZ(), + (void *)(addr_t)sched_hz); + + vm->yield_cycle_period = (V3_CPU_KHZ() * 1000) / sched_hz; + return 0; } +static int determine_paging_mode(struct guest_info * info, v3_cfg_tree_t * core_cfg) { + extern v3_cpu_arch_t v3_mach_type; + v3_cfg_tree_t * vm_tree = info->vm_info->cfg_data->cfg; + v3_cfg_tree_t * pg_tree = v3_cfg_subtree(vm_tree, "paging"); + char * pg_mode = v3_cfg_val(pg_tree, "mode"); + + PrintDebug(info->vm_info, info, "Paging mode specified as %s\n", pg_mode); + + if (pg_mode) { + if ((strcasecmp(pg_mode, "nested") == 0)) { + // we assume symmetric cores, so if core 0 has nested paging they all do + if ((v3_mach_type == V3_SVM_REV3_CPU) || + (v3_mach_type == V3_VMX_EPT_CPU) || + (v3_mach_type == V3_VMX_EPT_UG_CPU)) { + + V3_Print(info->vm_info, info, "Setting paging mode to NESTED\n"); + info->shdw_pg_mode = NESTED_PAGING; + } else { + PrintError(info->vm_info, info, "Nested paging not supported on this hardware. Defaulting to shadow paging\n"); + info->shdw_pg_mode = SHADOW_PAGING; + } + } else if ((strcasecmp(pg_mode, "shadow") == 0)) { + V3_Print(info->vm_info, info, "Setting paging mode to SHADOW\n"); + info->shdw_pg_mode = SHADOW_PAGING; + } else { + PrintError(info->vm_info, info, "Invalid paging mode (%s) specified in configuration. Defaulting to shadow paging\n", pg_mode); + info->shdw_pg_mode = SHADOW_PAGING; + } + } else { + V3_Print(info->vm_info, info, "No paging type specified in configuration. Defaulting to shadow paging\n"); + info->shdw_pg_mode = SHADOW_PAGING; + } -/* TODO: - * The amount of guest memory is stored in info->mem_size - * We need to make sure the memory map extends to cover it - */ -static int setup_memory_map(struct guest_info * info, struct v3_vm_config * config_ptr) { + if (v3_cfg_val(pg_tree, "large_pages") != NULL) { + if (strcasecmp(v3_cfg_val(pg_tree, "large_pages"), "true") == 0) { + info->use_large_pages = 1; + PrintDebug(info->vm_info, info, "Use of large pages in memory virtualization enabled.\n"); + } + } + return 0; +} -#ifdef CONFIG_PASSTHROUGH_VIDEO - PrintDebug("Setting up memory map (memory size=%dMB)\n", (uint_t)(info->mem_size / (1024 * 1024))); - - // VGA frame buffer - if (1) { - if (v3_add_shadow_mem(info, 0xa0000, 0xc0000, 0xa0000) == -1) { - PrintError("Could not map VGA framebuffer\n"); +static int pre_config_core(struct guest_info * info, v3_cfg_tree_t * core_cfg) { + if (determine_paging_mode(info, core_cfg) != 0) { + return -1; + } + + if (v3_init_core(info) == -1) { + PrintError(info->vm_info, info, "Error Initializing Core\n"); + return -1; + } + +#ifdef V3_CONFIG_MULTIBOOT + if (v3_init_multiboot_core(info)) { + PrintError(info->vm_info, info, "Error Initializing Multiboot Core\n"); + return -1; + } +#endif +#ifdef V3_CONFIG_HVM + if (v3_init_hvm_core(info)) { + PrintError(info->vm_info, info, "Error Initializing HVM Core\n"); + return -1; + } +#endif + + if (info->vm_info->vm_class == V3_PC_VM) { + if (pre_config_pc_core(info, core_cfg) == -1) { + PrintError(info->vm_info, info, "PC Post configuration failure\n"); return -1; } } else { - v3_hook_write_mem(info, 0xa0000, 0xc0000, 0xa0000, passthrough_mem_write, NULL); + PrintError(info->vm_info, info, "Invalid VM Class\n"); + return -1; } -#endif -#define VGABIOS_START 0x000c0000 -#define ROMBIOS_START 0x000f0000 + return 0; +} + - /* layout vgabios */ - { - extern uint8_t v3_vgabios_start[]; - extern uint8_t v3_vgabios_end[]; - addr_t vgabios_dst = v3_get_shadow_addr(&(info->mem_map.base_region), VGABIOS_START); - memcpy(V3_VAddr((void *)vgabios_dst), v3_vgabios_start, v3_vgabios_end - v3_vgabios_start); - } +static int post_config_vm(struct v3_vm_info * vm, v3_cfg_tree_t * cfg) { - /* layout rombios */ - { - extern uint8_t v3_rombios_start[]; - extern uint8_t v3_rombios_end[]; - addr_t rombios_dst = v3_get_shadow_addr(&(info->mem_map.base_region), ROMBIOS_START); - memcpy(V3_VAddr((void *)rombios_dst), v3_rombios_start, v3_rombios_end - v3_rombios_start); + + // Configure the memory map for the guest + if (setup_memory_map(vm, cfg) == -1) { + PrintError(vm, VCORE_NONE,"Setting up guest memory map failed...\n"); + return -1; } -#ifdef CONFIG_CRAY_XT - { -#define SEASTAR_START 0xffe00000 -#define SEASTAR_END 0xffffffff - // Map the Seastar straight through - if (v3_add_shadow_mem(info, SEASTAR_START, SEASTAR_END, SEASTAR_START) == -1) { - PrintError("Could not map through the seastar\n"); + + if (vm->vm_class == V3_PC_VM) { + if (post_config_pc(vm, cfg) == -1) { + PrintError(vm, VCORE_NONE,"PC Post configuration failure\n"); return -1; } + } else { + PrintError(vm, VCORE_NONE,"Invalid VM Class\n"); + return -1; } -#endif - v3_print_mem_map(info); + + + // Initialize fw_cfg state for VMM<->VM SEABIOS communication + if (v3_fw_cfg_init(vm) == -1) { + PrintError(vm, VCORE_NONE, "Error initializing Firmware Config (fw_cfg) state\n"); + return -1; + } + + /* + * Initialize configured devices + */ + if (setup_devices(vm, cfg) == -1) { + PrintError(vm, VCORE_NONE,"Failed to setup devices\n"); + return -1; + } + + + // v3_print_io_map(info); + v3_print_msr_map(vm); + + + + + /* + * Initialize configured extensions + */ + if (setup_extensions(vm, cfg) == -1) { + PrintError(vm, VCORE_NONE,"Failed to setup extensions\n"); + return -1; + } + + if (v3_setup_performance_tuning(vm, cfg) == -1) { + PrintError(vm, VCORE_NONE,"Failed to configure performance tuning parameters\n"); + return -1; + } + + + vm->run_state = VM_STOPPED; return 0; } -static int setup_devices(struct guest_info * info, struct v3_vm_config * config_ptr) { +static int post_config_core(struct guest_info * info, v3_cfg_tree_t * cfg) { - v3_create_device(info, "8259A", NULL); - v3_create_device(info, "KEYBOARD", NULL); - v3_create_device(info, "8254_PIT", NULL); - v3_create_device(info, "BOCHS_DEBUG", NULL); - v3_create_device(info, "OS_DEBUG", NULL); - v3_create_device(info, "LAPIC", NULL); - v3_create_device(info, "IOAPIC", "LAPIC"); - v3_create_device(info, "VMNET", NULL); - + + if (v3_init_core_extensions(info) == -1) { + PrintError(info->vm_info, info, "Error intializing extension core states\n"); + return -1; + } - v3_create_device(info, "CGA_VIDEO", (void *)1); - { - struct telnet_cons_cfg cons_cfg = {"CGA_VIDEO", 19997}; - v3_create_device(info, "TELNET_CONSOLE", &cons_cfg); + if (info->vm_info->vm_class == V3_PC_VM) { + if (post_config_pc_core(info, cfg) == -1) { + PrintError(info->vm_info, info, "PC Post configuration failure\n"); + return -1; + } + } else { + PrintError(info->vm_info, info, "Invalid VM Class\n"); + return -1; } - if (config_ptr->enable_pci == 1) { - struct ide_cfg ide_config = {"PCI", "PIIX3"}; - struct pci_passthrough_cfg pci_pt_cfg = {"PCI", "E1000", 0x8086, 0x100e}; - - v3_create_device(info, "PCI", NULL); - v3_create_device(info, "i440FX", "PCI"); - v3_create_device(info, "PIIX3", "PCI"); - - v3_create_device(info, "LNX_VIRTIO_SYM", "PCI"); - v3_create_device(info, "LNX_VIRTIO_BLK", "PCI"); - v3_create_device(info, "LNX_VIRTIO_BALLOON", "PCI"); - v3_create_device(info, "SYM_SWAP", "LNX_VIRTIO_BLK"); + return 0; +} + - v3_create_device(info, "IDE", &ide_config); - - v3_create_device(info, "PCI_PASSTHROUGH", &pci_pt_cfg); - } else { - v3_create_device(info, "IDE", NULL); +static struct v3_vm_info * allocate_guest(int num_cores) { + int guest_state_size = sizeof(struct v3_vm_info) + (sizeof(struct guest_info) * num_cores); + struct v3_vm_info * vm = V3_Malloc(guest_state_size); + + if (!vm) { + PrintError(VM_NONE, VCORE_NONE, "Unable to allocate space for guest data structures\n"); + return NULL; } + int i = 0; - if (config_ptr->pri_disk_type != NONE) { - if (config_ptr->pri_disk_type == CDROM) { - if (config_ptr->pri_disk_con == RAM) { - struct ram_cd_cfg cfg = {"IDE", 0, 0, - (addr_t)(config_ptr->pri_disk_info.ram.data_ptr), - config_ptr->pri_disk_info.ram.size}; + memset(vm, 0, guest_state_size); - PrintDebug("Creating RAM CD\n"); + vm->num_cores = num_cores; - v3_create_device(info, "RAM-CD", &cfg); - } else if (config_ptr->pri_disk_con == NETWORK) { - struct net_cd_cfg cfg = {"IDE", 0, 0, - config_ptr->pri_disk_info.net.ip_str, - config_ptr->pri_disk_info.net.port, - config_ptr->pri_disk_info.net.disk_name}; - PrintDebug("Creating NET CD\n"); + for (i = 0; i < num_cores; i++) { + vm->cores[i].core_run_state = CORE_INVALID; + } - v3_create_device(info, "NET-CD", &cfg); - } - } else if (config_ptr->pri_disk_type == HARDDRIVE) { - if (config_ptr->pri_disk_con == RAM) { - struct ram_hd_cfg cfg = {"IDE", 0, 0, - (addr_t)(config_ptr->pri_disk_info.ram.data_ptr), - config_ptr->pri_disk_info.ram.size}; - - PrintDebug("Creating RAM HD\n"); - - v3_create_device(info, "RAM-HD", &cfg); - } else if (config_ptr->pri_disk_con == NETWORK) { - struct net_hd_cfg cfg = {"IDE", 0, 0, - config_ptr->pri_disk_info.net.ip_str, - config_ptr->pri_disk_info.net.port, - config_ptr->pri_disk_info.net.disk_name}; - PrintDebug("Creating NET HD\n"); - v3_create_device(info, "NET-HD", &cfg); - } - } + vm->run_state = VM_INVALID; + + return vm; +} + +/* + + +*/ + + +struct v3_vm_info * v3_config_guest(void * cfg_blob, void * priv_data) { + extern v3_cpu_arch_t v3_mach_type; + struct v3_config * cfg_data = NULL; + struct v3_vm_info * vm = NULL; + int num_cores = 0; + int i = 0; + v3_cfg_tree_t * cores_cfg = NULL; + v3_cfg_tree_t * per_core_cfg = NULL; + + + if (v3_mach_type == V3_INVALID_CPU) { + PrintError(VM_NONE, VCORE_NONE, "Configuring guest on invalid CPU\n"); + return NULL; } + cfg_data = parse_config(cfg_blob); - if (config_ptr->sec_disk_type != NONE) { - if (config_ptr->sec_disk_type == CDROM) { - if (config_ptr->sec_disk_con == RAM) { - struct ram_cd_cfg cfg = {"IDE", 0, 1, - (addr_t)(config_ptr->sec_disk_info.ram.data_ptr), - config_ptr->sec_disk_info.ram.size}; + if (!cfg_data) { + PrintError(VM_NONE, VCORE_NONE, "Could not parse configuration\n"); + return NULL; + } - PrintDebug("Creating RAM CD\n"); - v3_create_device(info, "RAM-CD", &cfg); - } else if (config_ptr->sec_disk_con == NETWORK) { - struct net_cd_cfg cfg = {"IDE", 0, 1, - config_ptr->sec_disk_info.net.ip_str, - config_ptr->sec_disk_info.net.port, - config_ptr->sec_disk_info.net.disk_name}; - PrintDebug("Creating NET CD\n"); - v3_create_device(info, "NET-CD", &cfg); - } - } else if (config_ptr->sec_disk_type == HARDDRIVE) { - if (config_ptr->sec_disk_con == RAM) { - struct ram_hd_cfg cfg = {"IDE", 0, 1, - (addr_t)(config_ptr->sec_disk_info.ram.data_ptr), - config_ptr->sec_disk_info.ram.size}; - PrintDebug("Creating RAM HD\n"); - v3_create_device(info, "RAM-HD", &cfg); - } else if (config_ptr->sec_disk_con == NETWORK) { - struct net_hd_cfg cfg = {"IDE", 0, 1, - config_ptr->sec_disk_info.net.ip_str, - config_ptr->sec_disk_info.net.port, - config_ptr->sec_disk_info.net.disk_name}; - PrintDebug("Creating NET HD\n"); - v3_create_device(info, "NET-HD", &cfg); - } - } + cores_cfg = v3_cfg_subtree(cfg_data->cfg, "cores"); + + if (!cores_cfg) { + PrintError(VM_NONE, VCORE_NONE, "Could not find core configuration (new config format required)\n"); + return NULL; } + num_cores = atoi(v3_cfg_val(cores_cfg, "count")); + if (num_cores == 0) { + PrintError(VM_NONE, VCORE_NONE, "No cores specified in configuration\n"); + return NULL; + } + + V3_Print(VM_NONE, VCORE_NONE, "Configuring %d cores\n", num_cores); + vm = allocate_guest(num_cores); + + if (!vm) { + PrintError(VM_NONE, VCORE_NONE, "Could not allocate %d core guest\n", num_cores); + return NULL; + } -#ifdef CONFIG_GENERIC - configure_generic(info, config_ptr); +#ifdef V3_CONFIG_CACHEPART + // Need to initialize cache management and resource control + // as early as possible so that allocations are done accordingly + if (v3_init_cachepart_vm(vm,cfg_data->cfg)) { + PrintError(VM_NONE, VCORE_NONE, "Could not initialize cache partioning\n"); + V3_Free(vm); + return NULL; + } #endif - // This should go last because it requires information about the Harddrives - v3_create_device(info, "NVRAM", "IDE"); - - PrintDebugDevMgr(info); + vm->host_priv_data = priv_data; - return 0; -} + vm->cfg_data = cfg_data; + V3_Print(vm, VCORE_NONE, "Preconfiguration\n"); + if (pre_config_vm(vm, vm->cfg_data->cfg) == -1) { + PrintError(vm, VCORE_NONE, "Error in preconfiguration, attempting to free\n"); + vm->run_state=VM_ERROR; + v3_free_vm(vm); + return NULL; + } -#ifdef CONFIG_GENERIC -static int configure_generic(struct guest_info * info, struct v3_vm_config * config_ptr) { - PrintDebug("Creating Generic Device\n"); - v3_create_device(info, "GENERIC", NULL); - + V3_Print(vm, VCORE_NONE, "Per core configuration\n"); + per_core_cfg = v3_cfg_subtree(cores_cfg, "core"); - struct vm_device * generic = v3_find_dev(info, "GENERIC"); + // per core configuration + for (i = 0; i < vm->num_cores; i++) { + struct guest_info * info = &(vm->cores[i]); - if (!generic) { - PrintError("Could not find generic device\n"); - return -1; + info->vcpu_id = i; + info->vm_info = vm; + info->core_cfg_data = per_core_cfg; + + if (pre_config_core(info, per_core_cfg) == -1) { + PrintError(vm, VCORE_NONE, "Error in core %d preconfiguration, attempting to free guest\n", i); + vm->run_state=VM_ERROR; + v3_free_vm(vm); + return NULL; + } + + + per_core_cfg = v3_cfg_next_branch(per_core_cfg); } - // port 0x92: A20 enable/disable (bit 2) (This causes an MMU flush) + V3_Print(vm, VCORE_NONE, "Post Configuration\n"); - // Make the DMA controller invisible - v3_generic_add_port_range(generic, 0x00, 0x07, GENERIC_PRINT_AND_IGNORE); // DMA 1 channels 0,1,2,3 (address, counter) - v3_generic_add_port_range(generic, 0xc0, 0xc7, GENERIC_PRINT_AND_IGNORE); // DMA 2 channels 4,5,6,7 (address, counter) - v3_generic_add_port_range(generic, 0x87, 0x87, GENERIC_PRINT_AND_IGNORE); // DMA 1 channel 0 page register - v3_generic_add_port_range(generic, 0x83, 0x83, GENERIC_PRINT_AND_IGNORE); // DMA 1 channel 1 page register - v3_generic_add_port_range(generic, 0x81, 0x81, GENERIC_PRINT_AND_IGNORE); // DMA 1 channel 2 page register - v3_generic_add_port_range(generic, 0x82, 0x82, GENERIC_PRINT_AND_IGNORE); // DMA 1 channel 3 page register - v3_generic_add_port_range(generic, 0x8f, 0x8f, GENERIC_PRINT_AND_IGNORE); // DMA 2 channel 4 page register - v3_generic_add_port_range(generic, 0x8b, 0x8b, GENERIC_PRINT_AND_IGNORE); // DMA 2 channel 5 page register - v3_generic_add_port_range(generic, 0x89, 0x89, GENERIC_PRINT_AND_IGNORE); // DMA 2 channel 6 page register - v3_generic_add_port_range(generic, 0x8a, 0x8a, GENERIC_PRINT_AND_IGNORE); // DMA 2 channel 7 page register - v3_generic_add_port_range(generic, 0x08, 0x0f, GENERIC_PRINT_AND_IGNORE); // DMA 1 misc registers (csr, req, smask,mode,clearff,reset,enable,mmask) - v3_generic_add_port_range(generic, 0xd0, 0xde, GENERIC_PRINT_AND_IGNORE); // DMA 2 misc registers - - - - - // Make the Serial ports invisible - - v3_generic_add_port_range(generic, 0x3f8, 0x3f8+7, GENERIC_PRINT_AND_IGNORE); // COM 1 - v3_generic_add_port_range(generic, 0x2f8, 0x2f8+7, GENERIC_PRINT_AND_IGNORE); // COM 2 - + if (post_config_vm(vm, vm->cfg_data->cfg) == -1) { + PrintError(vm, VCORE_NONE, "Error in postconfiguration, attempting to free guest\n"); + vm->run_state=VM_ERROR; + v3_free_vm(vm); + return NULL; + } - - v3_generic_add_port_range(generic, 0x3e8, 0x3e8+7, GENERIC_PRINT_AND_IGNORE); // COM 3 - v3_generic_add_port_range(generic, 0x2e8, 0x2e8+7, GENERIC_PRINT_AND_IGNORE); // COM 4 + per_core_cfg = v3_cfg_subtree(cores_cfg, "core"); - - + // per core configuration + for (i = 0; i < vm->num_cores; i++) { + struct guest_info * info = &(vm->cores[i]); - // Make the PCI bus invisible (at least it's configuration) - - //v3_generic_add_port_range(generic, 0xcf8, 0xcf8, GENERIC_PRINT_AND_IGNORE); // PCI Config Address - //v3_generic_add_port_range(generic, 0xcfc, 0xcfc, GENERIC_PRINT_AND_IGNORE); // PCI Config Data - - - -#if 0 - if (!use_ramdisk) { - // Monitor the IDE controllers (very slow) - v3_generic_add_port_range(generic, 0x170, 0x178, GENERIC_PRINT_AND_PASSTHROUGH); // IDE 1 - v3_generic_add_port_range(generic, 0x376, 0x377, GENERIC_PRINT_AND_PASSTHROUGH); // IDE 1 + post_config_core(info, per_core_cfg); + + per_core_cfg = v3_cfg_next_branch(per_core_cfg); } - - v3_generic_add_port_range(generic, 0x1f0, 0x1f8, GENERIC_PRINT_AND_PASSTHROUGH); // IDE 0 - v3_generic_add_port_range(generic, 0x3f6, 0x3f7, GENERIC_PRINT_AND_PASSTHROUGH); // IDE 0 -#endif - - -#if 0 - - // Make the floppy controllers invisible - - v3_generic_add_port_range(generic, 0x3f0, 0x3f2, GENERIC_PRINT_AND_IGNORE); // Primary floppy controller (base,statusa/statusb,DOR) - v3_generic_add_port_range(generic, 0x3f4, 0x3f5, GENERIC_PRINT_AND_IGNORE); // Primary floppy controller (mainstat/datarate,data) - v3_generic_add_port_range(generic, 0x3f7, 0x3f7, GENERIC_PRINT_AND_IGNORE); // Primary floppy controller (DIR) - v3_generic_add_port_range(generic, 0x370, 0x372, GENERIC_PRINT_AND_IGNORE); // Secondary floppy controller (base,statusa/statusb,DOR) - v3_generic_add_port_range(generic, 0x374, 0x375, GENERIC_PRINT_AND_IGNORE); // Secondary floppy controller (mainstat/datarate,data) - v3_generic_add_port_range(generic, 0x377, 0x377, GENERIC_PRINT_AND_IGNORE); // Secondary floppy controller (DIR) - -#endif + V3_Print(vm, VCORE_NONE, "Configuration successfull\n"); + + return vm; +} -#if 1 - // Make the parallel port invisible - - v3_generic_add_port_range(generic, 0x378, 0x37f, GENERIC_PRINT_AND_IGNORE); -#endif +int v3_free_config(struct v3_vm_info * vm) { + + v3_free_htable(vm->cfg_data->file_table, 1, 0); + + v3_xml_free(vm->cfg_data->cfg); + + V3_Free(vm->cfg_data); + return 0; +} -#ifdef CONFIG_PASTHROUGH_VIDEO - // Monitor graphics card operations - - v3_generic_add_port_range(generic, 0x3b0, 0x3bb, GENERIC_PRINT_AND_PASSTHROUGH); - v3_generic_add_port_range(generic, 0x3c0, 0x3df, GENERIC_PRINT_AND_PASSTHROUGH); - -#endif -#if 1 - // Make the ISA PNP features invisible +static int setup_memory_map(struct v3_vm_info * vm, v3_cfg_tree_t * cfg) { + v3_cfg_tree_t * mem_region = v3_cfg_subtree(v3_cfg_subtree(cfg, "memmap"), "region"); + + while (mem_region) { + addr_t start_addr = atox(v3_cfg_val(mem_region, "start")); + addr_t end_addr = atox(v3_cfg_val(mem_region, "end")); + addr_t host_addr = atox(v3_cfg_val(mem_region, "host_addr")); + - v3_generic_add_port_range(generic, 0x274, 0x277, GENERIC_PRINT_AND_IGNORE); - v3_generic_add_port_range(generic, 0x279, 0x279, GENERIC_PRINT_AND_IGNORE); - v3_generic_add_port_range(generic, 0xa79, 0xa79, GENERIC_PRINT_AND_IGNORE); -#endif + if (v3_add_shadow_mem(vm, V3_MEM_CORE_ANY, start_addr, end_addr, host_addr) == -1) { + PrintError(vm, VCORE_NONE,"Could not map memory region: %p-%p => %p\n", + (void *)start_addr, (void *)end_addr, (void *)host_addr); + return -1; + } + mem_region = v3_cfg_next_branch(mem_region); + } -#if 1 - // Monitor any network card (realtek ne2000) operations - v3_generic_add_port_range(generic, 0xc100, 0xc1ff, GENERIC_PRINT_AND_PASSTHROUGH); -#endif + return 0; +} + + +static int setup_extensions(struct v3_vm_info * vm, v3_cfg_tree_t * cfg) { + v3_cfg_tree_t * extension = v3_cfg_subtree(v3_cfg_subtree(cfg, "extensions"), "extension"); + + while (extension) { + char * ext_name = v3_cfg_val(extension, "name"); + + if (!ext_name) { + PrintError(vm, VCORE_NONE, "Extension has no name\n"); + return -1; + } + + V3_Print(vm, VCORE_NONE, "Configuring extension %s\n", ext_name); + + if (v3_add_extension(vm, ext_name, extension) == -1) { + PrintError(vm, VCORE_NONE, "Error adding extension %s\n", ext_name); + return -1; + } + + extension = v3_cfg_next_branch(extension); + } + + return 0; +} + + +static int setup_devices(struct v3_vm_info * vm, v3_cfg_tree_t * cfg) { + v3_cfg_tree_t * device = v3_cfg_subtree(v3_cfg_subtree(cfg, "devices"), "device"); - // v3_generic_add_port_range(generic, 0x378, 0x400, GENERIC_PRINT_AND_IGNORE); + while (device) { + char * dev_class = v3_cfg_val(device, "class"); + + V3_Print(vm, VCORE_NONE, "configuring device %s\n", dev_class); + + if (v3_create_device(vm, dev_class, device) == -1) { + PrintError(vm, VCORE_NONE, "Error creating device %s\n", dev_class); + return -1; + } + + device = v3_cfg_next_branch(device); + } + + v3_print_dev_mgr(vm); + return 0; } -#endif + + +