From: Lei Xia Date: Thu, 25 Sep 2008 17:50:40 +0000 (-0500) Subject: test, X-Git-Tag: 1.0~3^2~11^2~18 X-Git-Url: http://v3vee.org/palacios/gitweb/gitweb.cgi?a=commitdiff_plain;h=20d6e61bf7781f1b53f0716b49e6239baba2856a;p=palacios-OLD.git test, --- diff --git a/palacios/src/lwip/lwipopts.h b/palacios/src/lwip/lwipopts.h deleted file mode 100644 index 0c2d74d..0000000 --- a/palacios/src/lwip/lwipopts.h +++ /dev/null @@ -1,421 +0,0 @@ -/** - * @file - * - * lwIP Options Configuration - */ - -/* - * Copyright (c) 2001-2004 Swedish Institute of Computer Science. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT - * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT - * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING - * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY - * OF SUCH DAMAGE. - * - * This file is part of the lwIP TCP/IP stack. - * - * Author: Adam Dunkels - * - */ -#ifndef __LWIPOPTS_H__ -#define __LWIPOPTS_H__ - -/* - * Include user defined options first. Anything not defined in these files - * will be set to standard values. Override anything you dont like! - */ -#include "lwipopts.h" -#include "lwip/debug.h" - -/* - ----------------------------------------------- - ---------- Platform specific locking ---------- - ----------------------------------------------- -*/ - -/** - * SYS_LIGHTWEIGHT_PROT==1: if you want inter-task protection for certain - * critical regions during buffer allocation, deallocation and memory - * allocation and deallocation. - */ -#define SYS_LIGHTWEIGHT_PROT 0 - -/** - * NO_SYS==1: Provides VERY minimal functionality. Otherwise, - * use lwIP facilities. - */ -#define NO_SYS 0 - -/* - ------------------------------------ - ---------- Memory options ---------- - ------------------------------------ -*/ - -/** - * MEM_ALIGNMENT: should be set to the alignment of the CPU - * 4 byte alignment -> #define MEM_ALIGNMENT 4 - * 2 byte alignment -> #define MEM_ALIGNMENT 2 - */ -#define MEM_ALIGNMENT 1 - -/** - * MEM_SIZE: the size of the heap memory. If the application will send - * a lot of data that needs to be copied, this should be set high. - */ -#define MEM_SIZE 1600 - -/* - ------------------------------------------------ - ---------- Internal Memory Pool Sizes ---------- - ------------------------------------------------ -*/ -/** - * MEMP_NUM_PBUF: the number of memp struct pbufs (used for PBUF_ROM and PBUF_REF). - * If the application sends a lot of data out of ROM (or other static memory), - * this should be set high. - */ -#define MEMP_NUM_PBUF 16 - -/** - * MEMP_NUM_RAW_PCB: Number of raw connection PCBs - * (requires the LWIP_RAW option) - */ -#define MEMP_NUM_RAW_PCB 4 - -/** - * MEMP_NUM_UDP_PCB: the number of UDP protocol control blocks. One - * per active UDP "connection". - * (requires the LWIP_UDP option) - */ -#define MEMP_NUM_UDP_PCB 4 - -/** - * MEMP_NUM_TCP_PCB: the number of simulatenously active TCP connections. - * (requires the LWIP_TCP option) - */ -#define MEMP_NUM_TCP_PCB 4 - -/** - * MEMP_NUM_TCP_PCB_LISTEN: the number of listening TCP connections. - * (requires the LWIP_TCP option) - */ -#define MEMP_NUM_TCP_PCB_LISTEN 4 - -/** - * MEMP_NUM_TCP_SEG: the number of simultaneously queued TCP segments. - * (requires the LWIP_TCP option) - */ -#define MEMP_NUM_TCP_SEG 16 - -/** - * MEMP_NUM_REASSDATA: the number of simultaneously IP packets queued for - * reassembly (whole packets, not fragments!) - */ -#define MEMP_NUM_REASSDATA 1 - -/** - * MEMP_NUM_ARP_QUEUE: the number of simulateously queued outgoing - * packets (pbufs) that are waiting for an ARP request (to resolve - * their destination address) to finish. - * (requires the ARP_QUEUEING option) - */ -#define MEMP_NUM_ARP_QUEUE 2 - -/** - * MEMP_NUM_SYS_TIMEOUT: the number of simulateously active timeouts. - * (requires NO_SYS==0) - */ -#define MEMP_NUM_SYS_TIMEOUT 3 - -/** - * MEMP_NUM_NETBUF: the number of struct netbufs. - * (only needed if you use the sequential API, like api_lib.c) - */ -#define MEMP_NUM_NETBUF 2 - -/** - * MEMP_NUM_NETCONN: the number of struct netconns. - * (only needed if you use the sequential API, like api_lib.c) - */ -#define MEMP_NUM_NETCONN 4 - -/** - * MEMP_NUM_TCPIP_MSG_API: the number of struct tcpip_msg, which are used - * for callback/timeout API communication. - * (only needed if you use tcpip.c) - */ -#define MEMP_NUM_TCPIP_MSG_API 8 - -/** - * MEMP_NUM_TCPIP_MSG_INPKT: the number of struct tcpip_msg, which are used - * for incoming packets. - * (only needed if you use tcpip.c) - */ -#define MEMP_NUM_TCPIP_MSG_INPKT 8 - -/** - * PBUF_POOL_SIZE: the number of buffers in the pbuf pool. - */ -#define PBUF_POOL_SIZE 8 - -/* - --------------------------------- - ---------- ARP options ---------- - --------------------------------- -*/ -/** - * LWIP_ARP==1: Enable ARP functionality. - */ -#define LWIP_ARP 1 - -/* - -------------------------------- - ---------- IP options ---------- - -------------------------------- -*/ -/** - * IP_FORWARD==1: Enables the ability to forward IP packets across network - * interfaces. If you are going to run lwIP on a device with only one network - * interface, define this to 0. - */ -#define IP_FORWARD 0 - -/** - * IP_OPTIONS: Defines the behavior for IP options. - * IP_OPTIONS_ALLOWED==0: All packets with IP options are dropped. - * IP_OPTIONS_ALLOWED==1: IP options are allowed (but not parsed). - */ -#define IP_OPTIONS_ALLOWED 1 - -/** - * IP_REASSEMBLY==1: Reassemble incoming fragmented IP packets. Note that - * this option does not affect outgoing packet sizes, which can be controlled - * via IP_FRAG. - */ -#define IP_REASSEMBLY 1 - -/** - * IP_FRAG==1: Fragment outgoing IP packets if their size exceeds MTU. Note - * that this option does not affect incoming packet sizes, which can be - * controlled via IP_REASSEMBLY. - */ -#define IP_FRAG 1 - -/** - * IP_REASS_MAXAGE: Maximum time (in multiples of IP_TMR_INTERVAL - so seconds, normally) - * a fragmented IP packet waits for all fragments to arrive. If not all fragments arrived - * in this time, the whole packet is discarded. - */ -#define IP_REASS_MAXAGE 3 - -/** - * IP_REASS_MAX_PBUFS: Total maximum amount of pbufs waiting to be reassembled. - * Since the received pbufs are enqueued, be sure to configure - * PBUF_POOL_SIZE > IP_REASS_MAX_PBUFS so that the stack is still able to receive - * packets even if the maximum amount of fragments is enqueued for reassembly! - */ -#define IP_REASS_MAX_PBUFS 4 - -/** - * IP_FRAG_USES_STATIC_BUF==1: Use a static MTU-sized buffer for IP - * fragmentation. Otherwise pbufs are allocated and reference the original - * packet data to be fragmented. -*/ -#define IP_FRAG_USES_STATIC_BUF 0 - -/** - * IP_DEFAULT_TTL: Default value for Time-To-Live used by transport layers. - */ -#define IP_DEFAULT_TTL 255 - -/* - ---------------------------------- - ---------- ICMP options ---------- - ---------------------------------- -*/ -/** - * LWIP_ICMP==1: Enable ICMP module inside the IP stack. - * Be careful, disable that make your product non-compliant to RFC1122 - */ -#define LWIP_ICMP 1 - -/* - --------------------------------- - ---------- RAW options ---------- - --------------------------------- -*/ -/** - * LWIP_RAW==1: Enable application layer to hook into the IP layer itself. - */ -#define LWIP_RAW 1 - -/* - ---------------------------------- - ---------- DHCP options ---------- - ---------------------------------- -*/ -/** - * LWIP_DHCP==1: Enable DHCP module. - */ -#define LWIP_DHCP 0 - - -/* - ------------------------------------ - ---------- AUTOIP options ---------- - ------------------------------------ -*/ -/** - * LWIP_AUTOIP==1: Enable AUTOIP module. - */ -#define LWIP_AUTOIP 0 - -/* - ---------------------------------- - ---------- SNMP options ---------- - ---------------------------------- -*/ -/** - * LWIP_SNMP==1: Turn on SNMP module. UDP must be available for SNMP - * transport. - */ -#define LWIP_SNMP 0 - -/* - ---------------------------------- - ---------- IGMP options ---------- - ---------------------------------- -*/ -/** - * LWIP_IGMP==1: Turn on IGMP module. - */ -#define LWIP_IGMP 0 - -/* - ---------------------------------- - ---------- DNS options ----------- - ---------------------------------- -*/ -/** - * LWIP_DNS==1: Turn on DNS module. UDP must be available for DNS - * transport. - */ -#define LWIP_DNS 0 - -/* - --------------------------------- - ---------- UDP options ---------- - --------------------------------- -*/ -/** - * LWIP_UDP==1: Turn on UDP. - */ -#define LWIP_UDP 1 - -/* - --------------------------------- - ---------- TCP options ---------- - --------------------------------- -*/ -/** - * LWIP_TCP==1: Turn on TCP. - */ -#define LWIP_TCP 1 - -#define LWIP_LISTEN_BACKLOG 0 - -/* - ---------------------------------- - ---------- Pbuf options ---------- - ---------------------------------- -*/ -/** - * PBUF_LINK_HLEN: the number of bytes that should be allocated for a - * link level header. The default is 14, the standard value for - * Ethernet. - */ -#define PBUF_LINK_HLEN 16 - -/** - * PBUF_POOL_BUFSIZE: the size of each pbuf in the pbuf pool. The default is - * designed to accomodate single full size TCP frame in one pbuf, including - * TCP_MSS, IP header, and link header. -* - */ -#define PBUF_POOL_BUFSIZE LWIP_MEM_ALIGN_SIZE(TCP_MSS+40+PBUF_LINK_HLEN) - -/* - ------------------------------------ - ---------- LOOPIF options ---------- - ------------------------------------ -*/ -/** - * LWIP_HAVE_LOOPIF==1: Support loop interface (127.0.0.1) and loopif.c - */ -#define LWIP_HAVE_LOOPIF 0 - -/* - ---------------------------------------------- - ---------- Sequential layer options ---------- - ---------------------------------------------- -*/ - -/** - * LWIP_NETCONN==1: Enable Netconn API (require to use api_lib.c) - */ -#define LWIP_NETCONN 1 - -/* - ------------------------------------ - ---------- Socket options ---------- - ------------------------------------ -*/ -/** - * LWIP_SOCKET==1: Enable Socket API (require to use sockets.c) - */ -#define LWIP_SOCKET 1 - -/* - ---------------------------------------- - ---------- Statistics options ---------- - ---------------------------------------- -*/ -/** - * LWIP_STATS==1: Enable statistics collection in lwip_stats. - */ -#define LWIP_STATS 0 -/* - --------------------------------- - ---------- PPP options ---------- - --------------------------------- -*/ -/** - * PPP_SUPPORT==1: Enable PPP. - */ -#define PPP_SUPPORT 0 - - -/* Misc */ - -#define LWIP_TIMEVAL_PRIVATE 0 - -#endif /* __LWIPOPTS_H__ */