X-Git-Url: http://v3vee.org/palacios/gitweb/gitweb.cgi?a=blobdiff_plain;f=v3_config_guest.pl;h=35aadc7d36dcb6e7c9a9480c3cd4321e2a99d89e;hb=d240aa16811174593dc6e6ca9c796db05948c353;hp=dd781e25861657cfa2498ad05489a4fc27303741;hpb=c10469f54e93ee7a21692f7a19b680610dc57e28;p=palacios.git

diff --git a/v3_config_guest.pl b/v3_config_guest.pl
index dd781e2..35aadc7 100755
--- a/v3_config_guest.pl
+++ b/v3_config_guest.pl
@@ -1,5 +1,6 @@
 #!/usr/bin/perl -w
 
+use Data::Dumper;
 
 print <<END
 
@@ -9,7 +10,7 @@ These guests *should* work for any host embedding (e.g., Kitten) but
 there may be hidden Linux assumptions.
 
 The tool assumes you have already built Palacios, the Linux embedding,
-and the Linux user-sapce tools.  If you haven't done this, hit CTRL-C
+and the Linux user-space tools.  If you haven't done this, hit CTRL-C
 now, configure and build Palacios, the user-space tools, and run
 v3_config_v3vee.pl.
 
@@ -45,6 +46,9 @@ END
 ;
 
 $pdir = $ENV{PALACIOS_DIR};
+$qdir = $ENV{PALACIOS_QEMU_DIR};
+
+$haveqemu = defined($qdir);
 
 if (!defined($pdir)) { 
   print "Please set PALACIOS_DIR (you probably have not sourced ENV) and try again\n";
@@ -60,7 +64,7 @@ if ($otherbios) {
 }
 
 
-$name = "guest";
+$name = "myguest";
 print "What is the name of your guest? [$name] : ";
 $name = get_user($name);
 
@@ -83,6 +87,8 @@ if ($config{numcores}>1) {
   }
 }
 
+do_swapping(\%config, $pdir);
+
 
 print "We will give your guest the default performance tuning characteristics\n";
 $config{perftune_block} .= <<PERFTUNE
@@ -117,6 +123,10 @@ if (is_palacios_core_feature_enabled($pdir, "V3_CONFIG_EXT_VMWARE")) {
   $config{extensions_block} .= "  <extension name=\"VMWARE_IFACE\"></extension>\n";
 }
 
+
+do_bioses(\%config, $pdir, $dir);
+
+
 #
 # Basic debugging
 #
@@ -154,7 +164,7 @@ if (is_palacios_core_feature_enabled($pdir,"V3_CONFIG_MPTABLE")) {
   print "We will include a classic MPTABLE constructor to describe your machine to the guest\n";
   add_device(\%config, "MPTABLE", "mptable");
 } else {
-  if ($numcores>1 &&  is_palacios_core_feature_enabled($pdir,"V3_CONFIG_BOCHSBIOS")) {
+  if ($config{numcores}>1 &&  is_palacios_core_feature_enabled($pdir,"V3_CONFIG_BOCHSBIOS")) {
     print "This is a multicore guest, and your Palacios configuration uses the classic BOCHS BIOS\n".
       "but does not have the MPTABLE constructor enabled...  This guest will almost\n".
 	"certainly fail to work.  Do you want to continue anyway? [n] :";
@@ -170,17 +180,28 @@ if (is_palacios_core_feature_enabled($pdir,"V3_CONFIG_MPTABLE")) {
 #
 do_device(\%config, $pdir, "V3_CONFIG_PIT", "8254_PIT", "PIT",1); # must have
 
-#
-# Keyboard and mouse (PS/2 controller)
-#
-do_device(\%config, $pdir, "V3_CONFIG_KEYBOARD", "KEYBOARD", "keyboard",1); #must have
 
+if (defined($ENV{PALACIOS_QEMU_DIR})) { 
+  print "\nYour Palacios configuration includes the ability to use QEMU devices from a patched QEMU.\n";
+  print "Do you want to use QEMU's PS/2, graphics, and serial port devices? [n] : ";
+  if (get_user("n") eq "y") { 
+    do_qemu_ui(\%config, $pdir, $dir);
+  }
+}
 
-#
-# Displays, Consoles, Serial
-#
-print "\nWe will now consider consoles and serial ports.\n\n";
-do_consoles_and_ports(\%config, $pdir);
+if (!defined($config{qemu_ui})) { 
+  #
+  # Keyboard and mouse (PS/2 controller)
+  #
+  do_device(\%config, $pdir, "V3_CONFIG_KEYBOARD", "KEYBOARD", "keyboard",1); #must have
+
+  #
+  # Displays, Consoles, Serial
+  #
+  print "\nWe will now consider consoles and serial ports.\n\n";
+  do_consoles_and_ports(\%config, $pdir);
+  
+}
 
 
 #
@@ -191,6 +212,8 @@ print "\nWe will now consider storage controllers and devices.\n\n";
 do_storage(\%config, $pdir, $dir, $name, "pci0", "southbridge");
 
 
+
+
 #
 # Network interfaces (attached to PCI bus)
 #
@@ -200,6 +223,33 @@ do_network(\%config, $pdir, $dir, $name, "pci0", "southbridge");
 
 
 #
+# Sanity-check - is there something bootable?
+#
+#
+if (!($config{havecd} && !($config{havehd}))) {
+  print "The guest's storage configuration does not have either a CD or an HD.  \n";
+  print "This means the guest BIOS will have nothing local to boot.  \n";
+  if (!($config{havenic})) { 
+    print "The guest also does does not have a NIC, which means the BIOS cannot\n";
+    print "do a network boot.\n";
+  } else {
+    print "The guest does have a NIC, so a network boot is possible, if the\n";
+    print "BIOS supports it.\n";
+  }
+  print "If this is not your intent, you probably want to CTRL-C and try again.\n";
+}
+
+print "The BIOS boot sequence will be set to CD,HD.   If you need to change this\n";
+print "later, edit the <bootseq> block within the NVRAM device.\n";
+
+#
+# NVRAM 
+#
+# Note: do_storage *must* have placed an IDE named ide0 in order for this to work
+#
+do_device(\%config, $pdir, "V3_CONFIG_NVRAM", "NVRAM", "nvram", 1, undef, "     <storage>ide0</storage>\n     <bootseq>cd,hd</bootseq>\n"); #must have
+
+#
 #
 # Generic Catch-all Device
 #
@@ -212,7 +262,9 @@ $target = PAL;
 
 print $target "<vm class=\"PC\">\n\n";
 print $target file_setup(\%config), "\n";
+print $target bios_setup(\%config),"\n";
 print $target memory_setup(\%config), "\n";
+print $target swapping_setup(\%config), "\n";
 print $target paging_setup(\%config), "\n";
 print $target memmap_setup(\%config), "\n";
 print $target numa_setup(\%config), "\n";
@@ -226,7 +278,20 @@ print $target "</vm>\n";
 
 close(PAL);
 
-print "\n\nYour guest is now ready in the directory $dir\n";
+print Dumper(\%config);
+
+if (defined($config{qemu}) && $config{qemu} eq "y") {
+  gen_qemu_startup(\%config, $pdir, $dir);
+}
+
+print "\n\nYour guest is now ready in the directory $dir\n\n";
+print "To run it, do:\n\n";
+print "  cd $dir\n";
+print "  v3_create -b $name.pal $name\n";
+print "  v3_launch /dev/v3-vmN (N given by v3_create)\n\n";
+print "Other useful tools:\n\n";
+print "  v3_console (CGA console)\n";
+print "  v3_stream (connect to stream, for example, serial port)\n\n";
 
 exit;
 
@@ -367,6 +432,82 @@ sub get_numa_data() {
   return %numa;
 }
 
+
+sub do_swapping {
+  my ($cr, $pdir) = @_;
+
+  my $canswap = is_palacios_core_feature_enabled($pdir,"V3_CONFIG_SWAPPING");
+  my $mem = $cr->{mem};
+
+  if ($canswap) { 
+    #Config for swapping
+    $cr->{swapping} = yn_question("Do you want to use swapping?", "n", "y", "n");
+
+    if ($cr->{swapping} eq "y") { 
+      $cr->{swap_alloc} = quant_question("How much memory do you want to allocate [MB] ?", $mem/2);
+      print "We will use the default swapping strategy.\n";
+      $cr->{swap_strat} = "default";
+      print "What file do you want to swap to? [./swap.bin] ";
+      $cr->{swap_file} = get_user("./swap.bin");
+    }
+  }
+}
+
+sub add_bios   {
+  my ($cr, $name, $fileid, $address) =@_;
+
+  push @{$cr->{bios_list}},  { name=>$name, fileid=>$fileid, address=>$address };
+  
+}
+
+sub do_bios {
+  my ($cr, $pdir, $dir) = @_;
+  my $nextbios = defined($cr->{bios_list}) ? "bios".($#{$cr->{bios_list}}+1) : "bios0";
+  
+  if (yn_question("Add a".($nextbios eq "bios0" ? "" : "nother")." custom bios? ", "n", "y", "n") eq "y") { 
+    my ($n, $fn, $addr) ;
+    print "What is your name for this bios? [$nextbios] : ";
+    $n = get_user($nextbios);
+    while (1) { 
+      print "Where is the path to the file for bios $n ? ";
+      $fn = get_user("");
+      if (!(-e $fn)) { 
+	print "Cannot find $fn, try again\n";
+	next;
+      } else {
+	if (system("cp $fn $dir/$n.dat")) { 
+	  print "Unable to copy $fn\n";
+	  next;
+	} else {
+	  add_file($cr, "$n", "$n.dat");
+	  print "What is the destination physical linear address (in hex) for bios $n [0xf0000] ? ";
+	  $addr = get_user("0xf0000");
+	  add_bios($cr,$n,$n,$addr);
+	  return 1;
+	}
+      }
+    }
+  } else {
+    return 0;
+  }
+}
+
+sub do_bioses { 
+  my ($cr, $pdir, $dir) = @_;
+
+  $cr->{bios_custom} = yn_question("Do you want to customize BIOSes?   (done automatically later for QEMU devices) ", "n", "y", "n");
+
+  if ($cr->{bios_custom} eq "y") { 
+    $cr->{bios_custom_nobios} = yn_question("Disable built-in system bios? ", "n", "y", "n");
+    $cr->{bios_custom_novgabios} = yn_question("Disable built-in VGA bios? ", "n", "y", "n");
+    
+    while (do_bios($cr, $pdir, $dir)) {}
+  }
+}
+      
+    
+					    
+
 sub do_device {
   my ($cr,$pdir,$feature, $class, $id, $hardfail, $optblob, $nestblob) =@_;
 
@@ -383,6 +524,74 @@ sub do_device {
   }
 }
 
+sub add_qemu_device {
+  my ($cr, $pdir, $type, $name, $url) = @_;
+
+  $cr->{qemu}='y';
+  
+  push @{$cr->{qemu_devices}}, { type=>$type, name=>$name, url=>$url } ;
+
+}
+
+sub do_qemu_ui {
+  my ($cr, $pdir, $dir) = @_;
+  my $vgabios=$ENV{PALACIOS_QEMU_DIR}."/share/qemu/vgabios-cirrus.bin";
+
+  $cr->{qemu_ui}='y';
+  
+  # PS/2 is a generic device
+  add_device($cr,"GENERIC","qemu-ps2",
+	     " forward=\"host_device\" hostdev=\"user:qemu-ps2\" ",
+	     "    <ports> <start>0x60</start> <end>0x60</end> <mode>PASSTHROUGH</mode> </ports>\n".
+	     "    <ports> <start>0x64</start> <end>0x64</end> <mode>PASSTHROUGH</mode> </ports>\n".
+	     "    <ports> <start>0x80</start> <end>0x80</end> <mode>PASSTHROUGH</mode> </ports>\n");
+  add_qemu_device($cr,$pdir, "qemu-ps2", "qemu-ps2", "user:qemu-ps2");
+
+  # so is serial
+  add_device($cr,"GENERIC", "qemu-serial",
+	     " forward=\"host_device\" hostdev=\"user:qemu-serial\" ",
+	     "    <ports> <start>0x3f8</start> <end>0x3ff</end>  <mode>PASSTHROUGH</mode> </ports>\n".
+	     "    <ports> <start>0x2f8</start> <end>0x2ff</end>  <mode>PASSTHROUGH</mode> </ports>\n".
+	     "    <ports> <start>0x3e8</start> <end>0x3ef</end>  <mode>PASSTHROUGH</mode> </ports>\n".
+	     "    <ports> <start>0x2e8</start> <end>0x2ef</end>  <mode>PASSTHROUGH</mode> </ports>\n");
+  add_qemu_device($cr,$pdir, "qemu-serial", "qemu-serial", "user:qemu-serial");
+
+  # Video has both a generic device and a PCI device (enhanced vga) and a bios
+  add_device($cr,"GENERIC", "qemu-video-legacy",
+	     " forward=\"host_device\" hostdev=\"user:qemu-video-legacy\" ",
+	     "    <ports> <start>0x3b4</start> <end>0x3da</end>  <mode>PASSTHROUGH</mode> </ports>\n".
+	     "    <memory> <start>0xa0000</start> <end>0xbffff</end>  <mode>PASSTHROUGH</mode> </memory>\n");
+  add_qemu_device($cr,$pdir, "qemu-video-legacy", "qemu-video-legacy", "user:qemu-video-legacy");
+
+  add_device($cr, "PCI_FRONT", "qemu-video",
+	     " hostdev=\"user:qemu-video\" ",
+	     "    <bus>pci0</bus>\n");
+
+  add_qemu_device($cr,$pdir, "qemu-video", "qemu-video", "user:qemu-video");
+
+  print "To use QEMU video, we will need to add the relevant bios. \n";
+  while (1) { 
+    print "Where is the QEMU video bios ? [$vgabios] : ";
+    $vgabios = get_user($vgabios); 
+    if (-e $vgabios) { 
+      if (system("cp $vgabios $dir/qemu-videobios.dat")) { 
+	print "Cannot copy $vgabios, try again\n";
+	next;
+      } else {
+	last;
+	}
+    } else {
+      print "Cannot find $vgabios, try again\n";
+      next;
+    } 
+  }
+  add_file($cr, "qemu-videobios", "qemu-videobios.dat");
+  add_bios($cr, "qemu-videobios", "qemu-videobios", "0xc0000");
+  $cr->{bios_custom} = 'y';
+  $cr->{bios_custom_novgabios} = 'y';
+
+}
+
 sub do_consoles_and_ports {
   my ($cr, $pdir) = @_;
 
@@ -411,10 +620,10 @@ sub do_consoles_and_ports {
   print "The CGA and VGA options are mutually exclusive\n";
   print "THe VGA and PARAGRAPH options are mutually exclusive\n";
   
-  if (!($cancga || $canvga || $canserial || $canvirioconsole)) { 
+  if (!($cancga || $canvga || $canserial || $canvirtioconsole)) { 
     print "Hmm... No console mechanism is enabled in your Palacios build...\n";
     print "  This is probably not what you want...\n";
-}
+  }
   
   $didcga=0;
   if ($cancga) { 
@@ -476,10 +685,11 @@ sub do_consoles_and_ports {
     }
   }
   
-  if (!($didcga || $didvga || $didserial || $didvirioconsole || $didparagraph)) { 
+  if (!($didcga || $didvga || $didserial || $didvirtioconsole || $didparagraph)) { 
     print "You have configured your guest without any obvious way of interacting with it....\n";
     print "  This is probably not what you want...\n";
   } 
+
 } 
 
 
@@ -570,7 +780,7 @@ sub do_network {
        $host=get_user("eth0");
        add_device($cr,"NIC_BRIDGE","net$num-back",undef,
                   "    <frontend tag=\"net$num\" />\n".
-                  "    <hostnic>$host</hostnic>\n");
+                  "    <hostnic name=\"$host\" />\n");
     }
 
     if ($back eq "vnet") { 
@@ -580,6 +790,10 @@ sub do_network {
     }
     $num++;
   }
+
+  if ($num>0) { 
+    $cr->{havenic}=1;
+  }
  }
 
 
@@ -626,7 +840,9 @@ sub do_storage {
       do_storage_backend($cr, $pdir, $dir, $name, "virtioblk$i", "data$i", "");
     }
   }
-}
+
+}      
+
 
 
 sub do_storage_backend {
@@ -670,7 +886,6 @@ sub do_storage_backend {
     print "  * FILEDISK - the data is kept in a host file (common) : ".($canfiledisk ? "available" : "UNAVAILABLE")."\n";
     print "  * NETDISK - the data is accessed via the network (uncommon) : ".($cannetdisk ? "available" : "UNAVAILABLE")."\n";
     print "  * TMPDISK - the data is kept in memory and discarded (common) : ".($cantmpdisk ? "available" : "UNAVAILABLE")."\n";
-    print "  * RAMDISK - the data is kept in memory (common) : ".($canramdisk ? "available" : "UNAVAILABLE")."\n";
     while (1) {
       print "Which option do you want for this device? {".join(", ",@disks)."} [] : ";
       $type = get_user("");
@@ -703,9 +918,11 @@ sub do_storage_backend {
       if ($what eq "cd") { 
 	$attach.="     <model>V3VEE CDROM</model>\n".
                  "     <type>CDROM</type>\n".$frontendblock;
+	$cr->{havecd}=1;
       } else {
 	$attach.="     <model>V3VEE HD</model>\n".
                  "     <type>HD</type>\n".$frontendblock;
+	$cr->{havehd}=1;
       }
       $attach.="    </frontend>\n";
 
@@ -799,7 +1016,7 @@ GENERIC2
 ;
   }
   my @par = find_devices_by_class($cr,"SERIAL");
-  if ($#par<0) { 
+  if ($#par<0 && !defined($cr->{qemu_ui})) {
     $block .=<<GENERIC3
     <ports>
      <!-- Serial COM 1 -->
@@ -940,6 +1157,14 @@ sub extensions_setup  {
   return $s;
 }
 
+sub swapping_setup {
+  my $cr=shift;
+  if (defined($cr->{swapping}) && $cr->{swapping} eq "y") { 
+    return " <swapping enable=\"y\">\n  <allocated>".$cr->{swap_alloc}."</allocated>\n  <file>".$cr->{swap_file}."</file>\n  <strategy>".$cr->{swap_strat}."</strategy>\n </swapping>\n";
+  } else {
+    return " <!-- there is no swapping configuration, but you can add one manually -->\n";
+  }
+}
 sub telemetry_setup  {
   my $cr=shift;
   return " <telemetry>".$cr->{telemetry}."</telemetry>\n";
@@ -964,6 +1189,25 @@ sub file_setup {
   }
 }
 
+sub bios_setup {
+  my $cr=shift;
+  
+  if (!defined($cr->{bios_custom}) || $cr->{bios_custom} eq "n") { 
+    return " <!-- this configuration does not use a custom bios setup but you can add one with the <bioses> syntax-->\n";
+  } else {
+    my $s;
+    my $b;
+    $s = " <bioses>\n";
+    $s.= "  <disable_rombios/>\n" if defined($cr->{bios_custom_nobios}) && $cr->{bios_custom_nobios} eq "y";
+    $s.= "  <disable_vgabios/>\n" if defined($cr->{bios_custom_novgabios}) && $cr->{bios_custom_novgabios} eq "y";
+    foreach $b (@{$cr->{bios_list}}) { 
+      $s.= "  <bios file=\"".$b->{fileid}."\" address=\"".$b->{address}."\" />\n";
+    }
+    $s.= " </bioses>\n";
+    return $s;
+  }
+}
+
 sub device_setup { 
   my $cr=shift;
   my $cd;
@@ -1066,3 +1310,38 @@ sub gen_image_file {
     return 0;
   }
 }
+
+
+sub gen_qemu_startup {
+  my ($cr, $pdir, $dir) = @_;
+  my $d;
+
+  # FIX ME
+  print "Generating QEMU Startup Script\n";
+
+  open(Q,">$dir/qemu_startup.sh");
+  print Q $ENV{PALACIOS_QEMU_DIR}."/bin/qemu-system-x86_64 -m 2048 -accel pal  ";
+  foreach $d (@{$cr->{qemu_devices}}) { 
+    if ($d->{type} eq "qemu-ps2") { 
+      print Q " -map KBD ".$d->{url}." ";
+    } elsif ($d->{type} eq "qemu-serial") { 
+      print Q " -serial stdio -map SERIAL ".$d->{url}." ";
+    } elsif ($d->{type} eq "qemu-video-legacy") { 
+      print Q " -map VGA ".$d->{url}." ";
+    } elsif ($d->{type} eq "qemu-video") { 
+      print Q " -vga cirrus -map CIRRUS ".$d->{url}." ";
+    } elsif ($d->{type} eq "qemu-e1000") { 
+      print Q " -nic e1000 -map E1000 ".$d->{url}." ";
+    } elsif ($d->{type} eq "qemu-ide-legacy") { 
+      print Q " -ide ... -map IDE-LEGACY ".$d->{url}." ";
+    } elsif ($d->{type} eq "qemu-ide") { 
+      print Q " -ide ... -map IDE ".$d->{url}." ";
+    } else {
+      die "Do not know how to handle QEMU device of type ".$d->{type}."\n";
+    }
+  }
+
+  print Q "\n";
+
+  close(Q);
+}