X-Git-Url: http://v3vee.org/palacios/gitweb/gitweb.cgi?a=blobdiff_plain;f=palacios%2Fsrc%2Fpalacios%2Fvmx.c;h=6ada30f2e72ecdddc6b08f1ceeb23577acbd0c47;hb=24e0221dd2fdcf613cc5e487ec57a30f2fef25e3;hp=2a461b972bcfdd9dfe00cb5096d7ddb8134fbd35;hpb=3e5e5a12e64630d7a37ed32b8d7e2d993c79f7e0;p=palacios.git

diff --git a/palacios/src/palacios/vmx.c b/palacios/src/palacios/vmx.c
index 2a461b9..6ada30f 100644
--- a/palacios/src/palacios/vmx.c
+++ b/palacios/src/palacios/vmx.c
@@ -33,6 +33,13 @@
 #include <palacios/vmx_io.h>
 #include <palacios/vmx_msr.h>
 
+
+#ifndef CONFIG_DEBUG_VMX
+#undef PrintDebug
+#define PrintDebug(fmt, args...)
+#endif
+
+
 static addr_t host_vmcs_ptrs[CONFIG_MAX_CPUS] = { [0 ... CONFIG_MAX_CPUS - 1] = 0};
 
 
@@ -199,10 +206,7 @@ static int init_vmcs_bios(struct guest_info * info, struct vmx_data * vmx_state)
 
     /********** Setup and VMX Control Fields from MSR ***********/
     /* Setup IO map */
-    /***** THEES NEED TO BE MOVED TO A GLOBAL LOCATION ***/
-    v3_init_vmx_io_map(info->vm_info);
-    v3_init_vmx_msr_map(info->vm_info);
-    /**** ****/
+
 
     struct v3_msr tmp_msr;
 
@@ -221,6 +225,10 @@ static int init_vmcs_bios(struct guest_info * info, struct vmx_data * vmx_state)
     vmx_state->pri_proc_ctrls.invlpg_exit = 1;
     vmx_state->pri_proc_ctrls.use_msr_bitmap = 1;
     vmx_state->pri_proc_ctrls.pause_exit = 1;
+    vmx_state->pri_proc_ctrls.tsc_offset = 1;
+#ifdef CONFIG_TIME_VIRTUALIZE_TSC
+    vmx_state->pri_proc_ctrls.rdtsc_exit = 1;
+#endif
 
     vmx_ret |= check_vmcs_write(VMCS_IO_BITMAP_A_ADDR, (addr_t)V3_PAddr(info->vm_info->io_map.arch_data));
     vmx_ret |= check_vmcs_write(VMCS_IO_BITMAP_B_ADDR, 
@@ -344,7 +352,7 @@ static int init_vmcs_bios(struct guest_info * info, struct vmx_data * vmx_state)
 #define VMXASSIST_GDT   0x10000
 	addr_t vmxassist_gdt = 0;
 
-	if (guest_pa_to_host_va(info, VMXASSIST_GDT, &vmxassist_gdt) == -1) {
+	if (v3_gpa_to_hva(info, VMXASSIST_GDT, &vmxassist_gdt) == -1) {
 	    PrintError("Could not find VMXASSIST GDT destination\n");
 	    return -1;
 	}
@@ -378,7 +386,7 @@ static int init_vmcs_bios(struct guest_info * info, struct vmx_data * vmx_state)
 	extern uint8_t v3_vmxassist_end[];
 	addr_t vmxassist_dst = 0;
 
-	if (guest_pa_to_host_va(info, VMXASSIST_START, &vmxassist_dst) == -1) {
+	if (v3_gpa_to_hva(info, VMXASSIST_START, &vmxassist_dst) == -1) {
 	    PrintError("Could not find VMXASSIST destination\n");
 	    return -1;
 	}
@@ -394,8 +402,12 @@ static int init_vmcs_bios(struct guest_info * info, struct vmx_data * vmx_state)
 
     info->dbg_regs.dr7 = 0x400;
 
+#ifdef __V3_64BIT__
     vmx_ret |= check_vmcs_write(VMCS_LINK_PTR, (addr_t)0xffffffffffffffffULL);
-    
+#else
+    vmx_ret |= check_vmcs_write(VMCS_LINK_PTR, (addr_t)0xffffffffUL);
+    vmx_ret |= check_vmcs_write(VMCS_LINK_PTR_HIGH, (addr_t)0xffffffffUL);
+#endif
 
     if (v3_update_vmcs_ctrl_fields(info)) {
         PrintError("Could not write control fields!\n");
@@ -497,7 +509,7 @@ static int update_irq_entry_state(struct guest_info * info) {
 
         int_info.valid = 1;
 #ifdef CONFIG_DEBUG_INTERRUPTS
-        PrintDebug("Injecting exception %d (EIP=%p)\n", int_info.vector, (void *)info->rip);
+        PrintDebug("Injecting exception %d (EIP=%p)\n", int_info.vector, (void *)(addr_t)info->rip);
 #endif
         check_vmcs_write(VMCS_ENTRY_INT_INFO, int_info.value);
 
@@ -539,7 +551,7 @@ static int update_irq_entry_state(struct guest_info * info) {
                     PrintDebug("Injecting Interrupt %d at exit %u(EIP=%p)\n", 
 			       info->intr_core_state.irq_vector, 
 			       (uint32_t)info->num_exits, 
-			       (void *)info->rip);
+			       (void *)(addr_t)info->rip);
 #endif
 
                     check_vmcs_write(VMCS_ENTRY_INT_INFO, ent_int.value);
@@ -632,13 +644,12 @@ static void print_exit_log(struct guest_info * info) {
  */
 int v3_vmx_enter(struct guest_info * info) {
     int ret = 0;
-    uint64_t tmp_tsc = 0;
+    uint32_t tsc_offset_low, tsc_offset_high;
     struct vmx_exit_info exit_info;
 
     // Conditionally yield the CPU if the timeslice has expired
     v3_yield_cond(info);
 
-
     // v3_print_guest_state(info);
 
     // disable global interrupts for vm state transition
@@ -647,8 +658,8 @@ int v3_vmx_enter(struct guest_info * info) {
     v3_vmx_restore_vmcs(info);
 
 
-#ifdef CONFIG_SYMBIOTIC
-    if (info->vm_info->sym_state.symcalls[info->cpu_id].sym_call_active == 0) {
+#ifdef CONFIG_SYMCALL
+    if (info->sym_core_state.symcall_state.sym_call_active == 0) {
 	update_irq_entry_state(info);
     }
 #else 
@@ -661,7 +672,16 @@ int v3_vmx_enter(struct guest_info * info) {
 	vmcs_write(VMCS_GUEST_CR3, guest_cr3);
     }
 
-    rdtscll(info->time_state.cached_host_tsc);
+    v3_update_timers(info);
+
+    /* If this guest is frequency-lagged behind host time, wait 
+     * for the appropriate host time before resuming the guest. */
+    v3_adjust_time(info);
+
+    tsc_offset_high = (uint32_t)((v3_tsc_host_offset(&info->time_state) >> 32) & 0xffffffff);
+    tsc_offset_low = (uint32_t)(v3_tsc_host_offset(&info->time_state) & 0xffffffff);
+    check_vmcs_write(VMCS_TSC_OFFSET_HIGH, tsc_offset_high);
+    check_vmcs_write(VMCS_TSC_OFFSET, tsc_offset_low);
 
     if (info->vm_info->run_state == VM_STOPPED) {
 	info->vm_info->run_state = VM_RUNNING;
@@ -681,12 +701,8 @@ int v3_vmx_enter(struct guest_info * info) {
 	return -1;
     }
 
-    rdtscll(tmp_tsc);
-
     info->num_exits++;
 
-    v3_update_time(info, tmp_tsc - info->time_state.cached_host_tsc);
-
     /* Update guest state */
     v3_vmx_save_vmcs(info);
 
@@ -709,8 +725,8 @@ int v3_vmx_enter(struct guest_info * info) {
     exit_log[info->num_exits % 10] = exit_info;
 
 
-#ifdef CONFIG_SYMBIOTIC
-    if (info->vm_info->sym_state.symcalls[info->cpu_id].sym_call_active == 0) {
+#ifdef CONFIG_SYMCALL
+    if (info->sym_core_state.symcall_state.sym_call_active == 0) {
 	update_irq_exit_state(info);
     }
 #else
@@ -732,21 +748,54 @@ int v3_vmx_enter(struct guest_info * info) {
 }
 
 
-int v3_start_vmx_guest(struct guest_info* info) {
+int v3_start_vmx_guest(struct guest_info * info) {
+
+    PrintDebug("Starting VMX core %u\n", info->cpu_id);
+
+    if (info->cpu_id == 0) {
+	info->core_run_state = CORE_RUNNING;
+	info->vm_info->run_state = VM_RUNNING;
+    } else {
+
+        PrintDebug("VMX core %u: Waiting for core initialization\n", info->cpu_id);
+
+        while (info->core_run_state == CORE_STOPPED) {
+            v3_yield(info);
+            //PrintDebug("VMX core %u: still waiting for INIT\n",info->cpu_id);
+        }
+	
+	PrintDebug("VMX core %u initialized\n", info->cpu_id);
+    }
+
 
+    PrintDebug("VMX core %u: I am starting at CS=0x%x (base=0x%p, limit=0x%x),  RIP=0x%p\n",
+               info->cpu_id, info->segments.cs.selector, (void *)(info->segments.cs.base),
+               info->segments.cs.limit, (void *)(info->rip));
 
-    PrintDebug("Launching VMX guest\n");
 
-    rdtscll(info->time_state.cached_host_tsc);
+    PrintDebug("VMX core %u: Launching VMX VM\n", info->cpu_id);
 
+    v3_start_time(info);
 
     while (1) {
+
+	if (info->vm_info->run_state == VM_STOPPED) {
+	    info->core_run_state = CORE_STOPPED;
+	    break;
+	}
+
 	if (v3_vmx_enter(info) == -1) {
 	    v3_print_vmcs();
 	    print_exit_log(info);
 	    return -1;
 	}
 
+
+
+	if (info->vm_info->run_state == VM_STOPPED) {
+	    info->core_run_state = CORE_STOPPED;
+	    break;
+	}
 /*
 	if ((info->num_exits % 5000) == 0) {
 	    V3_Print("VMX Exit number %d\n", (uint32_t)info->num_exits);
@@ -797,7 +846,7 @@ void v3_init_vmx_cpu(int cpu_id) {
     uint64_t ret = 0;
 
     v3_get_msr(VMX_CR4_FIXED0_MSR,&(tmp_msr.hi),&(tmp_msr.lo));
-    
+#ifdef __V3_64BIT__
     __asm__ __volatile__ (
 			  "movq %%cr4, %%rbx;"
 			  "orq  $0x00002000, %%rbx;"
@@ -826,6 +875,38 @@ void v3_init_vmx_cpu(int cpu_id) {
 			  :
 			  : "%rbx"
 			  );
+#elif __V3_32BIT__
+    __asm__ __volatile__ (
+			  "movl %%cr4, %%ecx;"
+			  "orl  $0x00002000, %%ecx;"
+			  "movl %%ecx, %0;"
+			  : "=m"(ret) 
+			  :
+			  : "%ecx"
+			  );
+
+    if ((~ret & tmp_msr.value) == 0) {
+        __asm__ __volatile__ (
+			      "movl %0, %%cr4;"
+			      :
+			      : "q"(ret)
+			      );
+    } else {
+        PrintError("Invalid CR4 Settings!\n");
+        return;
+    }
+
+    __asm__ __volatile__ (
+			  "movl %%cr0, %%ecx; "
+			  "orl  $0x00000020,%%ecx; "
+			  "movl %%ecx, %%cr0;"
+			  :
+			  :
+			  : "%ecx"
+			  );
+
+#endif
+
     //
     // Should check and return Error here....