X-Git-Url: http://v3vee.org/palacios/gitweb/gitweb.cgi?a=blobdiff_plain;f=palacios%2Fsrc%2Fpalacios%2Fvmm_config.c;h=136213d7ed456bdef15c836216bda89a4ffda6c3;hb=9eabc1235b1288295a9958ce0af61e6edb329337;hp=e01eee73c3dd5fe04abe2439912f46db51f1ae29;hpb=d34450b1e6fe3c2e1295c268c1722c669ba8d545;p=palacios.git

diff --git a/palacios/src/palacios/vmm_config.c b/palacios/src/palacios/vmm_config.c
index e01eee7..136213d 100644
--- a/palacios/src/palacios/vmm_config.c
+++ b/palacios/src/palacios/vmm_config.c
@@ -22,11 +22,20 @@
 #include <palacios/vmm_debug.h>
 #include <palacios/vmm_msr.h>
 #include <palacios/vmm_decoder.h>
-#include <palacios/vmm_profiler.h>
+#include <palacios/vmm_telemetry.h>
 #include <palacios/vmm_mem.h>
 #include <palacios/vmm_hypercall.h>
 #include <palacios/vmm_dev_mgr.h>
+#include <palacios/vmm_cpuid.h>
 
+#ifdef CONFIG_SYMBIOTIC
+#include <palacios/vmm_sym_iface.h>
+
+#ifdef CONFIG_SYMBIOTIC_SWAP
+#include <palacios/vmm_sym_swap.h>
+#endif
+
+#endif
 
 #include <devices/generic.h>
 #include <devices/ide.h>
@@ -35,10 +44,14 @@
 #include <devices/ram_hd.h>
 #include <devices/net_hd.h>
 
+#include <devices/telnet_cons.h>
+#include <devices/pci_passthrough.h>
+
+
+
 
 #include <palacios/vmm_host_events.h>
 
-#define USE_GENERIC 1
 
 
 #include <palacios/vmm_socket.h>
@@ -50,7 +63,7 @@ static int configure_generic(struct guest_info * info, struct v3_vm_config * con
 
 
 
-
+#ifdef CONFIG_PASSTHROUGH_VIDEO
 static int passthrough_mem_write(addr_t guest_addr, void * src, uint_t length, void * priv_data) {
 
     return length;
@@ -60,34 +73,39 @@ static int passthrough_mem_write(addr_t guest_addr, void * src, uint_t length, v
     
     return length;
 }
-
+#endif
 
 int v3_pre_config_guest(struct guest_info * info, struct v3_vm_config * config_ptr) {
-   extern v3_cpu_arch_t v3_cpu_type;
+   extern v3_cpu_arch_t v3_cpu_types[];
 
     // Amount of ram the Guest will have, rounded to a 4K page boundary
     info->mem_size = config_ptr->mem_size & ~(addr_t)0xfff;
 
+    info->cpu_id = config_ptr->guest_cpu;
 
-    // Initialize the subsystem data strutures
-    v3_init_time(info);
+    /*
+     * Initialize the subsystem data strutures
+     */
+#ifdef CONFIG_TELEMETRY
+    // This should go first, because other subsystems will depend on the guest_info flag
+    if (config_ptr->enable_telemetry) {
+	info->enable_telemetry = 1;
+	v3_init_telemetry(info);
+    } else {
+	info->enable_telemetry = 0;
+    }
+#endif
+
+    v3_init_hypercall_map(info);
     v3_init_io_map(info);
     v3_init_msr_map(info);
-    v3_init_interrupt_state(info);
-    v3_init_exception_state(info);
-    v3_init_dev_mgr(info);
+    v3_init_cpuid_map(info);
     v3_init_host_events(info);
 
-
-    v3_init_decoder(info);
-    
-    v3_init_hypercall_map(info);
-
-
     // Initialize the memory map
     v3_init_shadow_map(info);
     
-    if ((v3_cpu_type == V3_SVM_REV3_CPU) && 
+    if ((v3_cpu_types[info->cpu_id] == V3_SVM_REV3_CPU) && 
 	(config_ptr->enable_nested_paging == 1)) {
 	PrintDebug("Guest Page Mode: NESTED_PAGING\n");
 	info->shdw_pg_mode = NESTED_PAGING;
@@ -97,12 +115,21 @@ int v3_pre_config_guest(struct guest_info * info, struct v3_vm_config * config_p
 	info->shdw_pg_mode = SHADOW_PAGING;
     }
 
-    if (config_ptr->enable_profiling) {
-	info->enable_profiler = 1;
-	v3_init_profiler(info);
-    } else {
-	info->enable_profiler = 0;
-    }
+#ifdef CONFIG_SYMBIOTIC
+    v3_init_sym_iface(info);
+#endif
+
+    v3_init_time(info);
+    v3_init_interrupt_state(info);
+    v3_init_exception_state(info);
+    v3_init_dev_mgr(info);
+    v3_init_decoder(info);
+    
+#ifdef CONFIG_SYMBIOTIC_SWAP
+    PrintDebug("initializing symbiotic swap\n");
+    v3_init_sym_swap(info);
+#endif
+
 
     if (config_ptr->schedule_freq == 0) {
 	// set the schedule frequency to 100 HZ
@@ -136,6 +163,9 @@ int v3_post_config_guest(struct guest_info * info, struct v3_vm_config * config_
 	return -1;
     }
 
+    //    v3_print_io_map(info);
+    v3_print_msr_map(info);
+
     info->run_state = VM_STOPPED;
 
     info->vm_regs.rdi = 0;
@@ -159,6 +189,8 @@ int v3_post_config_guest(struct guest_info * info, struct v3_vm_config * config_
  * We need to make sure the memory map extends to cover it
  */
 static int setup_memory_map(struct guest_info * info, struct v3_vm_config * config_ptr) {
+
+#ifdef CONFIG_PASSTHROUGH_VIDEO
     PrintDebug("Setting up memory map (memory size=%dMB)\n", (uint_t)(info->mem_size / (1024 * 1024)));
     
     // VGA frame buffer
@@ -170,6 +202,7 @@ static int setup_memory_map(struct guest_info * info, struct v3_vm_config * conf
     } else {
 	v3_hook_write_mem(info, 0xa0000, 0xc0000, 0xa0000,  passthrough_mem_write, NULL);
     }
+#endif
 
 #define VGABIOS_START 0x000c0000
 #define ROMBIOS_START 0x000f0000
@@ -192,7 +225,7 @@ static int setup_memory_map(struct guest_info * info, struct v3_vm_config * conf
 	memcpy(V3_VAddr((void *)rombios_dst), v3_rombios_start, v3_rombios_end - v3_rombios_start);
     }
 
-#ifdef CRAY_XT
+#ifdef CONFIG_CRAY_XT
     {
 #define SEASTAR_START 0xffe00000 
 #define SEASTAR_END 0xffffffff 
@@ -204,7 +237,7 @@ static int setup_memory_map(struct guest_info * info, struct v3_vm_config * conf
     }
 #endif
 
-    print_shadow_map(info);
+    v3_print_mem_map(info);
 
     return 0;
 }
@@ -222,10 +255,17 @@ static int setup_devices(struct guest_info * info, struct v3_vm_config * config_
     v3_create_device(info, "IOAPIC", "LAPIC");
     v3_create_device(info, "VMNET", NULL);
     
-    int use_generic = USE_GENERIC;
+
+    v3_create_device(info, "CGA_VIDEO", (void *)1);
+    {
+	struct telnet_cons_cfg cons_cfg = {"CGA_VIDEO", 19997};
+	v3_create_device(info, "TELNET_CONSOLE", &cons_cfg);
+    }
 
     if (config_ptr->enable_pci == 1) {
 	struct ide_cfg ide_config = {"PCI", "PIIX3"};
+	struct pci_passthrough_cfg pci_qemu_pt_cfg = {"PCI", "E1000", 0x8086, 0x100e};
+	struct pci_passthrough_cfg pci_hw_pt_cfg = {"PCI", "E1000", 0x8086, 0x107c};
 	
 	v3_create_device(info, "PCI", NULL);
 	v3_create_device(info, "i440FX", "PCI");
@@ -237,8 +277,12 @@ static int setup_devices(struct guest_info * info, struct v3_vm_config * config_
 	v3_create_device(info, "LNX_VIRTIO_BALLOON", "PCI");
 	v3_create_device(info, "SYM_SWAP", "LNX_VIRTIO_BLK");
 
-
 	v3_create_device(info, "IDE", &ide_config);
+       
+	v3_create_device(info, "PCI_PASSTHROUGH", &pci_qemu_pt_cfg);
+	v3_create_device(info, "PCI_PASSTHROUGH", &pci_hw_pt_cfg);
+
+
     } else {
 	v3_create_device(info, "IDE", NULL);
     }
@@ -323,9 +367,9 @@ static int setup_devices(struct guest_info * info, struct v3_vm_config * config_
 
 
 
-    if (use_generic) {
+#ifdef CONFIG_GENERIC
 	configure_generic(info, config_ptr);
-    }
+#endif
 
     // This should go last because it requires information about the Harddrives
     v3_create_device(info, "NVRAM", "IDE");
@@ -337,7 +381,7 @@ static int setup_devices(struct guest_info * info, struct v3_vm_config * config_
 
 
 
-
+#ifdef CONFIG_GENERIC
 static int configure_generic(struct guest_info * info, struct v3_vm_config * config_ptr) {
     PrintDebug("Creating Generic Device\n");
     v3_create_device(info, "GENERIC", NULL);
@@ -425,7 +469,7 @@ static int configure_generic(struct guest_info * info, struct v3_vm_config * con
 
 #endif
 
-#if 1
+#ifdef CONFIG_PASTHROUGH_VIDEO
 
     // Monitor graphics card operations
     
@@ -453,3 +497,4 @@ static int configure_generic(struct guest_info * info, struct v3_vm_config * con
     
     return 0;
 }
+#endif