X-Git-Url: http://v3vee.org/palacios/gitweb/gitweb.cgi?a=blobdiff_plain;f=palacios%2Fsrc%2Fgeekos%2Fvmm_stubs.c;h=1e6a3a35e7f623b027d97257b9ebbcff7e60a629;hb=d5dcf31799fddceebb6456bb1365eb679459a529;hp=c83e6d5e87664fef3760133130127e6ddf996d4e;hpb=d8fc6aa4bc2a5d9cec50923e9d2bd30f867dd50a;p=palacios.releases.git

diff --git a/palacios/src/geekos/vmm_stubs.c b/palacios/src/geekos/vmm_stubs.c
index c83e6d5..1e6a3a3 100644
--- a/palacios/src/geekos/vmm_stubs.c
+++ b/palacios/src/geekos/vmm_stubs.c
@@ -104,7 +104,11 @@ int hook_irq_stub(struct guest_info * info, int irq) {
   SerialPrint("Hooking IRQ: %d (vm=0x%x)\n", irq, info);
   irq_map[irq] = info;
   volatile void *foo = pic_intr_handler;
-  foo=0;
+
+  /* This is disabled for the time being */
+  foo = 0;
+
+
   Disable_IRQ(irq);
   Install_IRQ(irq, pic_intr_handler);
   Enable_IRQ(irq);
@@ -133,70 +137,3 @@ unsigned int get_cpu_khz() {
   return cpu_khz_freq;
 }
 
-
-
-
-#if 0
-
-
-/* ------ Calibrate the TSC ------- 
- * Return processor ticks per second / CALIBRATE_FRAC.
- *
- * Ported From Xen
- */
-#define PIT_MODE 0x43
-#define PIT_CH2 0x42
-#define CLOCK_TICK_RATE 1193180 /* system crystal frequency (Hz) */
-#define CALIBRATE_FRAC  20      /* calibrate over 50ms */
-#define CALIBRATE_LATCH ((CLOCK_TICK_RATE+(CALIBRATE_FRAC/2))/CALIBRATE_FRAC)
-
-
-unsigned long long get_cpu_khz() {
-    ullong_t start, end;
-    unsigned long count;
-    unsigned long long tmp;
-    unsigned long print_tmp; 
-
-    /* Set the Gate high, disable speaker */
-    VM_Out_Byte((VM_In_Byte(0x61) & ~0x02) | 0x01, 0x61);
-
-    /*
-     * Now let's take care of CTC channel 2
-     *
-     * Set the Gate high, program CTC channel 2 for mode 0, (interrupt on
-     * terminal count mode), binary count, load 5 * LATCH count, (LSB and MSB)
-     * to begin countdown.
-     */
-    VM_Out_Byte(0xb0, PIT_MODE);           /* binary, mode 0, LSB/MSB, Ch 2 */
-    VM_Out_Byte(CALIBRATE_LATCH & 0xff, PIT_CH2); /* LSB of count */
-    VM_Out_Byte(CALIBRATE_LATCH >> 8, PIT_CH2);   /* MSB of count */
-
-    rdtscll(start);
-    for ( count = 0; (VM_In_Byte(0x61) & 0x20) == 0; count++ )
-        continue;
-    rdtscll(end);
-
-    /* Error if the CTC doesn't behave itself. */
-    if ( count == 0 ) {
-     PrintBoth("CPU Frequency Calibration Error\n");
-      return 0;
-    }
-
-    tmp = ((end - start) * (ullong_t)CALIBRATE_FRAC);
-
-    do_div(tmp, 1000);
-
-    tmp &= 0xffffffff;
-    print_tmp = (unsigned long)tmp;
-
-   PrintBoth("Detected %lu.%lu MHz CPU\n", print_tmp / 1000, print_tmp % 1000);
-    return tmp;
-}
-
-#undef PIT_CH2
-#undef PIT_MODE
-#undef CLOCK_TICK_RATE
-#undef CALIBRATE_FRAC  
-#undef CALIBRATE_LATCH 
-
-#endif