X-Git-Url: http://v3vee.org/palacios/gitweb/gitweb.cgi?a=blobdiff_plain;f=palacios%2Fsrc%2Fgeekos%2Fmain.c;h=a66c42f2af9f991be53f7fefdecc2862dc1c04e8;hb=7841dc573457c334a0f3b6e9186d26b1776c400f;hp=2cd5a6a7909034395126d0abc5a518b3978d78be;hpb=8126d0d154dfd37ed7997f4fa78a1c179c4d2c81;p=palacios.git diff --git a/palacios/src/geekos/main.c b/palacios/src/geekos/main.c index 2cd5a6a..a66c42f 100644 --- a/palacios/src/geekos/main.c +++ b/palacios/src/geekos/main.c @@ -3,7 +3,7 @@ * Copyright (c) 2001,2003,2004 David H. Hovemeyer * Copyright (c) 2003, Jeffrey K. Hollingsworth * Copyright (c) 2004, Iulian Neamtiu - * $Revision: 1.10 $ + * $Revision: 1.33 $ * * This is free software. You are permitted to use, * redistribute, and modify it as specified in the file "COPYING". @@ -26,41 +26,21 @@ #include #include #include +#include -#include - -#include - -#include - -/* - static inline unsigned int cpuid_ecx(unsigned int op) - { - unsigned int eax, ecx; - - __asm__("cpuid" - : "=a" (eax), "=c" (ecx) - : "0" (op) - : "bx", "dx" ); - - return ecx; - } -*/ +#include +#include +#include -extern void Get_MSR(ulong_t msr, unsigned int *val1, unsigned int *val2); -extern void Set_MSR(ulong_t msr, ulong_t val1, ulong_t val2); -extern uint_t Get_EIP(); -extern uint_t Get_ESP(); -extern uint_t Get_EBP(); -int foo=42; #define SPEAKER_PORT 0x61 + void Buzz(unsigned delay, unsigned num) { volatile int x; @@ -107,47 +87,8 @@ inline uchar_t MyIn_Byte(ushort_t port) } -extern void MyBuzzVM(); - -#define MYBUZZVM_START MyBuzzVM -#define MYBUZZVM_LEN 0x3d - -void BuzzVM() -{ - int x; - int j; - unsigned char init; - - - init=MyIn_Byte(SPEAKER_PORT); - - while (1) { - MyOut_Byte(SPEAKER_PORT, init|0x2); - for (j=0;j<1000000;j++) { - x+=j; - } - MyOut_Byte(SPEAKER_PORT, init); - for (j=0;j<1000000;j++) { - x+=j; - } - } -} - -extern void RunVM(); - -int vmRunning = 0; - -void RunVM() { - vmRunning = 1; - - while(1); -} - - -extern uint_t VMCS_STORE(); -extern uint_t VMCS_READ(); @@ -165,19 +106,7 @@ void Buzzer(ulong_t arg) { -void Hello(ulong_t arg) -{ - char *b="hello "; - char byte; - short port=0xe9; - int i; - while(1){ - for (i=0;i<6;i++) { - byte=b[i]; - __asm__ __volatile__ ("outb %b0, %w1" : : "a"(byte), "Nd"(port) ); - } - } -} + void Keyboard_Listener(ulong_t arg) { ulong_t * doIBuzz = (ulong_t*)arg; @@ -205,47 +134,15 @@ extern char BSS_START, BSS_END; extern char end; -/* -void VM_Thread(ulong_t arg) -{ - int ret; - struct VMDescriptor *vm = (struct VMDescriptor *) arg; - - SerialPrintLevel(100,"VM_Thread: Launching VM with (entry_ip=%x, exit_eip=%x, guest_esp=%x)\n", - vm->entry_ip, vm->exit_eip, vm->guest_esp); - - SerialPrintLevel(100,"VM_Thread: You should see nothing further from me\n"); - - ret = VMLaunch(vm); +/* This is an ugly hack to get at the VM memory */ +ulong_t vm_range_start; +ulong_t vm_range_end; +ulong_t guest_kernel_start; +ulong_t guest_kernel_end; +/* ** */ - SerialPrintLevel(100,"VM_Thread: uh oh..."); - - switch (ret) { - case VMX_SUCCESS: - SerialPrintLevel(100,"Normal VMExit Occurred\n"); - break; - case VMX_FAIL_INVALID: - SerialPrintLevel(100,"Possibile invalid VMCS (%.8x)\n", ret); - break; - case VMX_FAIL_VALID: - SerialPrintLevel(100,"Valid VMCS, errorcode recorded in VMCS\n"); - break; - case VMM_ERROR: - SerialPrintLevel(100,"VMM Error\n"); - break; - default: - SerialPrintLevel(100,"VMLaunch returned unknown error (%.8x)\n", ret); - break; - } - - SerialPrintLevel(100,"VM_Thread: Spinning\n"); - while (1) {} - -} -*/ - int AllocateAndMapPagesForRange(uint_t start, uint_t length, pte_t template_pte) { uint_t address; @@ -276,16 +173,13 @@ void Main(struct Boot_Info* bootInfo) { struct Kernel_Thread * key_thread; struct Kernel_Thread * spkr_thread; - // struct Kernel_Thread * vm_thread; - // struct VMDescriptor vm; ulong_t doIBuzz = 0; Init_BSS(); Init_Screen(); - - InitSerial(); + Init_Serial(); Init_Mem(bootInfo); Init_CRC32(); Init_TSS(); @@ -299,13 +193,13 @@ void Main(struct Boot_Info* bootInfo) // Init_IDE(); - Print("Done; stalling\n"); + // Print("Done; stalling\n"); #if 0 - SerialPrint("Dumping VM kernel Code (first 512 bytes @ 0x%x)\n",VM_KERNEL_START); - SerialMemDump((unsigned char *)VM_KERNEL_START, 512); + SerialPrint("Dumping VM kernel Code (first 128 bytes @ 0x%x)\n", 0x100000); + SerialMemDump((unsigned char *)0x100000, 256); /* SerialPrint("Dumping kernel Code (first 512 bytes @ 0x%x)\n",KERNEL_START); SerialMemDump((unsigned char *)VM_KERNEL_START, 512); @@ -313,91 +207,31 @@ void Main(struct Boot_Info* bootInfo) #endif #if 1 - SerialPrint("Dumping GUEST KERNEL CODE (first 512*2 bytes @ 0x100000)\n"); - SerialMemDump((unsigned char *)0x100000, 512*2); + SerialPrint("Dumping BIOS code ffff0-fffff\n\n"); + SerialMemDump((unsigned char *)0x10fff0, 16); + /* + SerialPrint("Dumping kernel Code (first 512 bytes @ 0x%x)\n",KERNEL_START); + SerialMemDump((unsigned char *)VM_KERNEL_START, 512); + */ #endif - - - - SerialPrint("\n\nHello, Welcome to this horrid output-only serial interface\n"); - SerialPrint("Eventually, this will let us control the VMM\n\n"); - - SerialPrint("\n\n===>"); - - - - Init_VMM(); - - +#if 1 SerialPrintLevel(1000,"Launching Noisemaker and keyboard listener threads\n"); - key_thread = Start_Kernel_Thread(Keyboard_Listener, (ulong_t)&doIBuzz, PRIORITY_NORMAL, false); spkr_thread = Start_Kernel_Thread(Buzzer, (ulong_t)&doIBuzz, PRIORITY_NORMAL, false); +#endif + { + RunVMM(bootInfo); + } - - - // Try to launch a real VM - - - // We now map pages of physical memory into where we are going - // to slap the vmxassist, bios, and vgabios code - /* - pte_t template_pte; - - template_pte.present=1; - template_pte.flags=VM_WRITE|VM_READ|VM_USER|VM_EXEC; - template_pte.accessed=0; - template_pte.dirty=0; - template_pte.pteAttribute=0; - template_pte.globalPage=0; - template_pte.kernelInfo=0; - - SerialPrintLevel(1000,"Allocating Pages for VM kernel\n"); - -#define SEGLEN (1024*64) - - AllocateAndMapPagesForRange(START_OF_VM+0x100000, VM_KERNEL_LENGTH / 512, template_pte); -*/ - // Now we should be copying into actual memory - - //SerialPrintLevel(1000,"Copying VM code from %x to %x (%d bytes)\n", VM_KERNEL_START, START_OF_VM+0x100000,VM_KERNEL_LENGTH); - //memcpy((char*)(START_OF_VM+0x100000),(char*)VM_KERNEL_START,VM_KERNEL_LENGTH); - - //SerialPrintLevel(1000, "VM copied\n"); - - /* - // jump into vmxassist - vm.entry_ip=(uint_t)0x00107fd0; - vm.exit_eip=0; - // Put the stack at 512K - vm.guest_esp=(uint_t)4096 + 8192 - 4; - *(unsigned int *)(vm.guest_esp) = 1024 * 1024; - vm.guest_esp -= 4; - *(unsigned int *)(vm.guest_esp) = 8; - vm.guest_esp -= 4; - *(unsigned int *)(vm.guest_esp) = vm.guest_esp + 4;; - vm.guest_esp -= 4; - *(unsigned int *)(vm.guest_esp) = vm.entry_ip; - // vm.guest_esp -= 4; - - - SerialMemDump((unsigned char *)vm.entry_ip, 512); - */ - - // vm_thread = Start_Kernel_Thread(VM_Thread, (ulong_t)&vm,PRIORITY_NORMAL,false); - - SerialPrintLevel(1000,"Next: setup GDT\n"); - TODO("Write a Virtual Machine Monitor"); - - /* Now this thread is done. */ + Exit(0); }