X-Git-Url: http://v3vee.org/palacios/gitweb/gitweb.cgi?a=blobdiff_plain;f=palacios%2Fsrc%2Fdevices%2Fpiix3.c;h=e1709d63602ef62bb34426f7b20209fa8e4c4ea8;hb=60ad6a41c6d0ee08ed689e8505eb0c3df0c2a289;hp=b482b488e59576fdb46a2cf893b0448f5b62e1a2;hpb=eb2dd607efd35a1521ae6a707e0a2178dd1f74ee;p=palacios.git

diff --git a/palacios/src/devices/piix3.c b/palacios/src/devices/piix3.c
index b482b48..e1709d6 100644
--- a/palacios/src/devices/piix3.c
+++ b/palacios/src/devices/piix3.c
@@ -371,15 +371,19 @@ struct pirq_rc_reg {
 */
 
 
-static int raise_pci_irq(struct pci_device * pci_dev, void * dev_data) {
+static int raise_pci_irq(struct pci_device * pci_dev, void * dev_data, struct v3_irq * vec) {
     struct v3_southbridge * piix3 = dev_data;
     struct pci_device * piix3_pci = piix3->southbridge_pci;
     struct piix3_config_space * piix3_cfg = (struct piix3_config_space *)(piix3_pci->config_data);
     int intr_pin = pci_dev->config_header.intr_pin - 1;
     int irq_index = (intr_pin + pci_dev->dev_num - 1) & 0x3;
+    struct v3_irq irq; // Make a copy of the irq state because we will switch the irq number
+
+    irq.ack = vec->ack;
+    irq.private_data = vec->private_data;
 
     /*
-    PrintError("Raising PCI dev %d intr %d via IOAPIC as IRQ %d and via PIRQ as IRQ %d on VM %p\n", 
+    PrintError(info->vm_info, info, "Raising PCI dev %d intr %d via IOAPIC as IRQ %d and via PIRQ as IRQ %d on VM %p\n", 
 	       pci_dev->dev_num, pci_dev->config_header.intr_pin, 
 	       16+irq_index,
 	       piix3_cfg->pirq_rc[irq_index], piix3->vm);
@@ -388,7 +392,10 @@ static int raise_pci_irq(struct pci_device * pci_dev, void * dev_data) {
     // deliver first by PIRQ, if it exists
     //
     if (piix3_cfg->pirq_rc[irq_index] < 16) {
-	v3_raise_irq(piix3->vm, piix3_cfg->pirq_rc[irq_index] & 0xf);
+	irq.irq = piix3_cfg->pirq_rc[irq_index] & 0xf;
+
+	//	V3_Print(info->vm_info, info, "Raising PIIX IRQ %d\n", irq.irq);
+	v3_raise_acked_irq(piix3->vm, irq);
     } else {
       // not an error
     }
@@ -396,7 +403,9 @@ static int raise_pci_irq(struct pci_device * pci_dev, void * dev_data) {
     // deliver next via the PCI0 to ioapic mapping defined in the 
     // mptable (ioapic, pins 16->19 are used for PCI0)
     // ideally this would check to verify that an ioapic is actually available
-    v3_raise_irq(piix3->vm, 16+irq_index);
+    irq.irq = (irq_index + 1) + 16;
+    //    V3_Print(info->vm_info, info, "Raising PIIX IRQ (#2) %d\n", irq.irq);
+    v3_raise_acked_irq(piix3->vm, irq);
     
 
     return 0;
@@ -404,21 +413,26 @@ static int raise_pci_irq(struct pci_device * pci_dev, void * dev_data) {
 
 
 
-static int lower_pci_irq(struct pci_device * pci_dev, void * dev_data) {
+static int lower_pci_irq(struct pci_device * pci_dev, void * dev_data, struct v3_irq * vec) {
     struct v3_southbridge * piix3 = dev_data;
     struct pci_device * piix3_pci = piix3->southbridge_pci;
     struct piix3_config_space * piix3_cfg = (struct piix3_config_space *)(piix3_pci->config_data);
     int intr_pin = pci_dev->config_header.intr_pin - 1;
     int irq_index = (intr_pin + pci_dev->dev_num - 1) & 0x3;
-    
-    //    PrintError("Lowering PCI IRQ %d\n", piix3_cfg->pirq_rc[irq_index]);
+    struct v3_irq irq; // Make a copy of the irq state because we will switch the irq number
+
+    irq.ack = vec->ack;
+    irq.private_data = vec->private_data;
+    //    PrintError(info->vm_info, info, "Lowering PCI IRQ %d\n", piix3_cfg->pirq_rc[irq_index]);
 
     // First, lower the pin on the ioapic
-    v3_lower_irq(piix3->vm, irq_index+16);
+    irq.irq = (irq_index + 1) + 16;
+    v3_lower_acked_irq(piix3->vm, irq);
     
     // Next, lower whatever we asserted by the PIRQs
     if (piix3_cfg->pirq_rc[irq_index] < 16) {
-	v3_lower_irq(piix3->vm, piix3_cfg->pirq_rc[irq_index] & 0xf);
+	irq.irq = piix3_cfg->pirq_rc[irq_index] & 0xf;
+	v3_lower_acked_irq(piix3->vm, irq);
     } else {
       // not an error
     }
@@ -457,9 +471,9 @@ static int setup_pci(struct v3_southbridge * piix3) {
     pci_dev = v3_pci_register_device(piix3->pci_bus, PCI_MULTIFUNCTION, 
 				     bus_num, -1, 0, 
 				     "PIIX3", bars, 
-				     NULL, NULL, NULL, piix3);
+				     NULL, NULL, NULL, NULL, piix3);
     if (pci_dev == NULL) {
-	PrintError("Could not register PCI Device for PIIX3\n");
+	PrintError(VM_NONE, VCORE_NONE, "Could not register PCI Device for PIIX3\n");
 	return -1;
     }
 
@@ -483,8 +497,13 @@ static int piix3_init(struct v3_vm_info * vm, v3_cfg_tree_t * cfg) {
     struct vm_device * pci = v3_find_dev(vm, v3_cfg_val(cfg, "bus"));
     char * dev_id = v3_cfg_val(cfg, "ID");
 
+    if (!piix3) {
+	PrintError(vm, VCORE_NONE, "Cannot allocate in init\n");
+	return -1;
+    }
+
     if (!pci) {
-	PrintError("Could not find PCI device\n");
+	PrintError(vm, VCORE_NONE, "Could not find PCI device\n");
 	return -1;
     }
 
@@ -495,12 +514,12 @@ static int piix3_init(struct v3_vm_info * vm, v3_cfg_tree_t * cfg) {
     dev = v3_add_device(vm, dev_id, &dev_ops, piix3);
 
     if (dev == NULL) {
-	PrintError("Could not attach device %s\n", dev_id);
+	PrintError(vm, VCORE_NONE, "Could not attach device %s\n", dev_id);
 	V3_Free(piix3);
 	return -1;
     }
 
-    PrintDebug("Created PIIX3\n");
+    PrintDebug(vm, VCORE_NONE, "Created PIIX3\n");
 
     if (setup_pci(piix3) == -1) {
 	v3_remove_device(dev);