X-Git-Url: http://v3vee.org/palacios/gitweb/gitweb.cgi?a=blobdiff_plain;f=palacios%2Fsrc%2Fdevices%2Fkeyboard.c;h=28442c7787a4ca4b006b15651410a53fbc016e76;hb=4bc3ee757b44d3e466fd89e348106c47fa5511ee;hp=afcfc257f516f6ac01bf8ae2b0fb01272a3dedd5;hpb=9b4bfeefac09294a6f0ae12dbadf102eb547f5ec;p=palacios.git diff --git a/palacios/src/devices/keyboard.c b/palacios/src/devices/keyboard.c index afcfc25..28442c7 100644 --- a/palacios/src/devices/keyboard.c +++ b/palacios/src/devices/keyboard.c @@ -103,22 +103,22 @@ struct keyboard_internal { - // - // 0x60 is the port for the keyboard microcontroller - // writes are commands - // reads from it usually return scancodes - // however, it can also return other data - // depending on the state of the onboard microcontroller - // - // 0x64 is the port for the onboard microcontroller - // writes are commands - // reads are status - // - - // state of the onboard microcontroller - // this is needed because sometimes 0x60 reads come - // from the onboard microcontroller - enum {// Normal mode measn we deliver keys + // + // 0x60 is the port for the keyboard microcontroller + // writes are commands + // reads from it usually return scancodes + // however, it can also return other data + // depending on the state of the onboard microcontroller + // + // 0x64 is the port for the onboard microcontroller + // writes are commands + // reads are status + // + + // state of the onboard microcontroller + // this is needed because sometimes 0x60 reads come + // from the onboard microcontroller + enum {// Normal mode measn we deliver keys // to the vm and accept commands from it NORMAL, // after receiving cmd 0x60 @@ -146,63 +146,63 @@ struct keyboard_internal { // we wait for a new output byte on 60 // then send it to the mouse IN_MOUSE, - } state; - - - enum { - // after receiving a mouse command 0f 0xff - // we return the ack and then the next thing will be the - // bat code (aa - success) - RESET1, - // followed by the device id (00 - mouse) - RESET2, - // Then it goes into stream mode - STREAM1, // - STREAM2, // - STREAM3, // for each of the following bytes in mouse_packet - // this is used for setting sample rate - SAMPLE1, - // this is used for getting device id - DEVICE1, - // just like the stream moes - REMOTE1, - REMOTE2, - REMOTE3, - // For getting status info - STATUS1, - STATUS2, - STATUS3, - // set resolution - SETRES1, - } mouse_state; - - - uchar_t wrap; - uchar_t mouse_packet[3]; // byte 1: y over, xover, y sign, x sign, 1, middle, right, left - // byte 2: x movement - // byte 3: y movement - - uchar_t mouse_needs_ack; // - uchar_t mouse_done_after_ack; - - uchar_t cmd_byte; // for keyboard uC - read/written - // via read/write cmd byte command - uchar_t status_byte; // for on-board uC - read via 64h - - uchar_t output_byte; // output port of onboard uC (e.g. A20) - - uchar_t input_byte; // input port of onboard uC - - // Data for 8042 - uchar_t input_queue; // - uint_t input_queue_len; // - //uint_t input_queue_read; - //uint_t input_queue_write; - // Data for system - uchar_t output_queue; // - uint_t output_queue_len; // - //uint_t output_queue_read; - //uint_t output_queue_write; + } state; + + + enum { + // after receiving a mouse command 0f 0xff + // we return the ack and then the next thing will be the + // bat code (aa - success) + RESET1, + // followed by the device id (00 - mouse) + RESET2, + // Then it goes into stream mode + STREAM1, // + STREAM2, // + STREAM3, // for each of the following bytes in mouse_packet + // this is used for setting sample rate + SAMPLE1, + // this is used for getting device id + DEVICE1, + // just like the stream moes + REMOTE1, + REMOTE2, + REMOTE3, + // For getting status info + STATUS1, + STATUS2, + STATUS3, + // set resolution + SETRES1, + } mouse_state; + + + uchar_t wrap; + uchar_t mouse_packet[3]; // byte 1: y over, xover, y sign, x sign, 1, middle, right, left + // byte 2: x movement + // byte 3: y movement + + uchar_t mouse_needs_ack; // + uchar_t mouse_done_after_ack; + + uchar_t cmd_byte; // for keyboard uC - read/written + // via read/write cmd byte command + uchar_t status_byte; // for on-board uC - read via 64h + + uchar_t output_byte; // output port of onboard uC (e.g. A20) + + uchar_t input_byte; // input port of onboard uC + + // Data for 8042 + uchar_t input_queue; // + uint_t input_queue_len; // + //uint_t input_queue_read; + //uint_t input_queue_write; + // Data for system + uchar_t output_queue; // + uint_t output_queue_len; // + //uint_t output_queue_read; + //uint_t output_queue_write; }; @@ -214,33 +214,33 @@ struct keyboard_internal { // static int PushToOutputQueue(struct vm_device * dev, uchar_t value, uchar_t overwrite, uchar_t cmd, uchar_t mouse) { - struct keyboard_internal *state = (struct keyboard_internal *)(dev->private_data); + struct keyboard_internal *state = (struct keyboard_internal *)(dev->private_data); - if ((state->output_queue_len == 0) || overwrite) { + if ((state->output_queue_len == 0) || overwrite) { - state->output_queue = value; - state->output_queue_len = 1; + state->output_queue = value; + state->output_queue_len = 1; - if (cmd) { - state->status_byte |= STATUS_COMMAND_DATA_AVAIL; - } else { - state->status_byte &= ~STATUS_COMMAND_DATA_AVAIL; - } + if (cmd) { + state->status_byte |= STATUS_COMMAND_DATA_AVAIL; + } else { + state->status_byte &= ~STATUS_COMMAND_DATA_AVAIL; + } - if (mouse) { - state->status_byte |= STATUS_MOUSE_BUFFER_FULL; - } + if (mouse) { + state->status_byte |= STATUS_MOUSE_BUFFER_FULL; + } - { - state->status_byte |= STATUS_OUTPUT_BUFFER_FULL; - } + { + state->status_byte |= STATUS_OUTPUT_BUFFER_FULL; + } - return 0; + return 0; - } else { - PrintError("keyboard: PushToOutputQueue Failed - Queue Full\n"); - return -1; - } + } else { + PrintError("keyboard: PushToOutputQueue Failed - Queue Full\n"); + return -1; + } } #if 1 @@ -250,31 +250,31 @@ static int PushToOutputQueue(struct vm_device * dev, uchar_t value, uchar_t over // static int PullFromOutputQueue(struct vm_device * dev, uchar_t * value) { - struct keyboard_internal *state = (struct keyboard_internal *)(dev->private_data); + struct keyboard_internal *state = (struct keyboard_internal *)(dev->private_data); - if (1 || (state->output_queue_len == 1)) { + if (1 || (state->output_queue_len == 1)) { - *value = state->output_queue; - state->output_queue_len = 0; + *value = state->output_queue; + state->output_queue_len = 0; - if (state->status_byte & STATUS_OUTPUT_BUFFER_FULL) { - state->status_byte &= ~STATUS_OUTPUT_BUFFER_FULL; - } + if (state->status_byte & STATUS_OUTPUT_BUFFER_FULL) { + state->status_byte &= ~STATUS_OUTPUT_BUFFER_FULL; + } - if (state->status_byte & STATUS_MOUSE_BUFFER_FULL) { - state->status_byte &= ~STATUS_MOUSE_BUFFER_FULL; - } + if (state->status_byte & STATUS_MOUSE_BUFFER_FULL) { + state->status_byte &= ~STATUS_MOUSE_BUFFER_FULL; + } - if (state->status_byte & STATUS_COMMAND_DATA_AVAIL) { - state->status_byte &= ~STATUS_COMMAND_DATA_AVAIL; - } // reset to data + if (state->status_byte & STATUS_COMMAND_DATA_AVAIL) { + state->status_byte &= ~STATUS_COMMAND_DATA_AVAIL; + } // reset to data - return 0; - } else { - PrintError("keyboard: PullFromOutputQueue Failed - Queue Empty\n"); - return -1; - } + return 0; + } else { + PrintError("keyboard: PullFromOutputQueue Failed - Queue Empty\n"); + return -1; + } } #endif @@ -285,19 +285,19 @@ static int PullFromOutputQueue(struct vm_device * dev, uchar_t * value) // static int PushToInputQueue(struct vm_device * dev, uchar_t value, uchar_t overwrite) { - struct keyboard_internal *state = (struct keyboard_internal *)(dev->private_data); + struct keyboard_internal *state = (struct keyboard_internal *)(dev->private_data); - if ((state->input_queue_len == 0) || overwrite) { + if ((state->input_queue_len == 0) || overwrite) { - state->input_queue = value; - state->input_queue_len = 1; - state->status_byte |= STATUS_INPUT_BUFFER_FULL; + state->input_queue = value; + state->input_queue_len = 1; + state->status_byte |= STATUS_INPUT_BUFFER_FULL; - return 0; - } else { - PrintError("keyboard: PushToOutputQueue Failed - Queue Full\n"); - return -1; - } + return 0; + } else { + PrintError("keyboard: PushToOutputQueue Failed - Queue Full\n"); + return -1; + } } // @@ -306,19 +306,19 @@ static int PushToInputQueue(struct vm_device * dev, uchar_t value, uchar_t overw // static int PullFromInputQueue(struct vm_device *dev, uchar_t *value) { - struct keyboard_internal * state = (struct keyboard_internal *)(dev->private_data); + struct keyboard_internal * state = (struct keyboard_internal *)(dev->private_data); - if (state->input_queue_len == 1) { + if (state->input_queue_len == 1) { - *value = state->input_queue; - state->input_queue_len = 0; - state->status_byte &= ~STATUS_INPUT_BUFFER_FULL; + *value = state->input_queue; + state->input_queue_len = 0; + state->status_byte &= ~STATUS_INPUT_BUFFER_FULL; - return 0; - } else { - PrintError("keyboard: PullFromInputQueue Failed - Queue Empty\n"); - return -1; - } + return 0; + } else { + PrintError("keyboard: PullFromInputQueue Failed - Queue Empty\n"); + return -1; + } } #endif @@ -327,11 +327,11 @@ static int PullFromInputQueue(struct vm_device *dev, uchar_t *value) static int keyboard_interrupt(struct vm_device * dev, uint_t irq) { - PrintDebug("keyboard: interrupt 0x%x\n", irq); + PrintDebug("keyboard: interrupt 0x%x\n", irq); - v3_raise_irq(dev->vm, irq); + v3_raise_irq(dev->vm, irq); - return 0; + return 0; } @@ -340,86 +340,86 @@ static int keyboard_interrupt(struct vm_device * dev, uint_t irq) { static int key_event_handler(struct guest_info * info, struct v3_keyboard_event * evt, void * private_data) { - struct vm_device * dev = (struct vm_device *)private_data; - struct keyboard_internal *state = (struct keyboard_internal *)(dev->private_data); + struct vm_device * dev = (struct vm_device *)private_data; + struct keyboard_internal *state = (struct keyboard_internal *)(dev->private_data); - PrintDebug("keyboard: injected status 0x%x, and scancode 0x%x\n", evt->status, evt->scan_code); + PrintDebug("keyboard: injected status 0x%x, and scancode 0x%x\n", evt->status, evt->scan_code); - if ( (state->status_byte & STATUS_ENABLED) // onboard is enabled - && (!(state->cmd_byte & CMD_DISABLE)) ) { // keyboard is enabled + if ( (state->status_byte & STATUS_ENABLED) // onboard is enabled + && (!(state->cmd_byte & CMD_DISABLE)) ) { // keyboard is enabled - PushToOutputQueue(dev, evt->scan_code, OVERWRITE, DATA, KEYBOARD); + PushToOutputQueue(dev, evt->scan_code, OVERWRITE, DATA, KEYBOARD); - if (state->cmd_byte & CMD_INTR) { - keyboard_interrupt(dev, KEYBOARD_IRQ); + if (state->cmd_byte & CMD_INTR) { + keyboard_interrupt(dev, KEYBOARD_IRQ); + } } - } - return 0; + return 0; } static int mouse_event_handler(struct guest_info * info, struct v3_mouse_event * evt, void * private_data) { - struct vm_device * dev = (struct vm_device *)private_data; - struct keyboard_internal * state = (struct keyboard_internal *)(dev->private_data); + struct vm_device * dev = (struct vm_device *)private_data; + struct keyboard_internal * state = (struct keyboard_internal *)(dev->private_data); - PrintDebug("keyboard: injected mouse packet 0x %x %x %x\n", - evt->data[0], evt->data[1], evt->data[2]); + PrintDebug("keyboard: injected mouse packet 0x %x %x %x\n", + evt->data[0], evt->data[1], evt->data[2]); - memcpy(state->mouse_packet, evt->data, 3); + memcpy(state->mouse_packet, evt->data, 3); - state->status_byte |= STATUS_MOUSE_BUFFER_FULL; + state->status_byte |= STATUS_MOUSE_BUFFER_FULL; - switch (state->mouse_state) { - case STREAM1: - case STREAM2: - case STREAM3: - if (!(state->cmd_byte & CMD_MOUSE_DISABLE)) { - keyboard_interrupt(dev, MOUSE_IRQ); + switch (state->mouse_state) { + case STREAM1: + case STREAM2: + case STREAM3: + if (!(state->cmd_byte & CMD_MOUSE_DISABLE)) { + keyboard_interrupt(dev, MOUSE_IRQ); + } + break; + default: + return -1; + break; } - break; - default: - return -1; - break; - } - return 0; + return 0; } static int keyboard_reset_device(struct vm_device * dev) { - struct keyboard_internal *data = (struct keyboard_internal *)(dev->private_data); + struct keyboard_internal *data = (struct keyboard_internal *)(dev->private_data); - memset(data, 0, sizeof(struct keyboard_internal)); + memset(data, 0, sizeof(struct keyboard_internal)); - data->state = NORMAL; - data->mouse_state = STREAM1; + data->state = NORMAL; + data->mouse_state = STREAM1; - data->cmd_byte = - CMD_INTR // interrupts on - | CMD_MOUSE_INTR // mouse interupts on - | CMD_SYSTEM ; // self test passed - // PS2, keyboard+mouse enabled, generic translation + data->cmd_byte = + CMD_INTR // interrupts on + | CMD_MOUSE_INTR // mouse interupts on + | CMD_SYSTEM ; // self test passed + // PS2, keyboard+mouse enabled, generic translation - data->status_byte = - STATUS_SYSTEM // self-tests passed - | STATUS_ENABLED ; // keyboard ready - // buffers empty, no errors + data->status_byte = + STATUS_SYSTEM // self-tests passed + | STATUS_ENABLED ; // keyboard ready + // buffers empty, no errors - data->output_byte = 0; // ? + data->output_byte = 0; // ? - data->input_byte = INPUT_RAM; // we have some - // also display=color, jumper 0, keyboard enabled + data->input_byte = INPUT_RAM; // we have some + // also display=color, jumper 0, keyboard enabled - PrintDebug("keyboard: reset device\n"); + PrintDebug("keyboard: reset device\n"); - return 0; + return 0; } @@ -427,358 +427,358 @@ static int keyboard_reset_device(struct vm_device * dev) static int keyboard_start_device(struct vm_device *dev) { - PrintDebug("keyboard: start device\n"); - return 0; + PrintDebug("keyboard: start device\n"); + return 0; } static int keyboard_stop_device(struct vm_device *dev) { - PrintDebug("keyboard: stop device\n"); - return 0; + PrintDebug("keyboard: stop device\n"); + return 0; } static int mouse_read_input(struct vm_device *dev) { - struct keyboard_internal *state = (struct keyboard_internal *)(dev->private_data); + struct keyboard_internal *state = (struct keyboard_internal *)(dev->private_data); - if (state->mouse_needs_ack) { - state->mouse_needs_ack = 0; + if (state->mouse_needs_ack) { + state->mouse_needs_ack = 0; - // the ack has been stuffed previously - if (state->mouse_done_after_ack) { - return 1; - } else { - return 0; + // the ack has been stuffed previously + if (state->mouse_done_after_ack) { + return 1; + } else { + return 0; + } } - } - switch (state->mouse_state) { + switch (state->mouse_state) { - case RESET1: // requesting the BAT code - PushToOutputQueue(dev, 0xaa, OVERWRITE, DATA, MOUSE) ; // BAT successful - PrintDebug(" mouse sent BAT code (sucesssful) "); - state->mouse_state = RESET2; + case RESET1: // requesting the BAT code + PushToOutputQueue(dev, 0xaa, OVERWRITE, DATA, MOUSE) ; // BAT successful + PrintDebug(" mouse sent BAT code (sucesssful) "); + state->mouse_state = RESET2; - return 0; // not done with mouse processing yet - break; + return 0; // not done with mouse processing yet + break; - case RESET2: // requesting the device id - PushToOutputQueue(dev, 0x00, OVERWRITE, DATA, MOUSE) ; // normal mouse type - PrintDebug(" mouse sent device id "); - state->mouse_state = STREAM1; + case RESET2: // requesting the device id + PushToOutputQueue(dev, 0x00, OVERWRITE, DATA, MOUSE) ; // normal mouse type + PrintDebug(" mouse sent device id "); + state->mouse_state = STREAM1; - return 1; // done with mouse processing - break; + return 1; // done with mouse processing + break; - case STREAM1: // send data - PushToOutputQueue(dev, state->mouse_packet[0], OVERWRITE, DATA, MOUSE); - PrintDebug(" mouse sent stream data1 "); - state->mouse_state = STREAM2; + case STREAM1: // send data + PushToOutputQueue(dev, state->mouse_packet[0], OVERWRITE, DATA, MOUSE); + PrintDebug(" mouse sent stream data1 "); + state->mouse_state = STREAM2; - return 0; - break; + return 0; + break; - case STREAM2: // send data - PushToOutputQueue(dev, state->mouse_packet[1], OVERWRITE, DATA, MOUSE); - PrintDebug(" mouse sent stream data2 "); - state->mouse_state = STREAM3; + case STREAM2: // send data + PushToOutputQueue(dev, state->mouse_packet[1], OVERWRITE, DATA, MOUSE); + PrintDebug(" mouse sent stream data2 "); + state->mouse_state = STREAM3; - return 0; - break; + return 0; + break; - case STREAM3: // send data - PushToOutputQueue(dev, state->mouse_packet[2], OVERWRITE, DATA, MOUSE); - PrintDebug(" mouse sent stream data3 "); - state->mouse_state = STREAM1; + case STREAM3: // send data + PushToOutputQueue(dev, state->mouse_packet[2], OVERWRITE, DATA, MOUSE); + PrintDebug(" mouse sent stream data3 "); + state->mouse_state = STREAM1; - return 1; // now done - break; + return 1; // now done + break; - case REMOTE1: // send data - PushToOutputQueue(dev, state->mouse_packet[0], OVERWRITE, DATA, MOUSE); - PrintDebug(" mouse sent remote data1 "); - state->mouse_state = REMOTE2; + case REMOTE1: // send data + PushToOutputQueue(dev, state->mouse_packet[0], OVERWRITE, DATA, MOUSE); + PrintDebug(" mouse sent remote data1 "); + state->mouse_state = REMOTE2; - return 0; - break; + return 0; + break; - case REMOTE2: // send data - PushToOutputQueue(dev, state->mouse_packet[1], OVERWRITE, DATA, MOUSE); - PrintDebug(" mouse sent remote data2 "); - state->mouse_state = REMOTE3; + case REMOTE2: // send data + PushToOutputQueue(dev, state->mouse_packet[1], OVERWRITE, DATA, MOUSE); + PrintDebug(" mouse sent remote data2 "); + state->mouse_state = REMOTE3; - return 0; - break; + return 0; + break; - case REMOTE3: // send data - PushToOutputQueue(dev, state->mouse_packet[2], OVERWRITE, DATA, MOUSE); - PrintDebug(" mouse sent remote data3 "); - state->mouse_state = REMOTE1; + case REMOTE3: // send data + PushToOutputQueue(dev, state->mouse_packet[2], OVERWRITE, DATA, MOUSE); + PrintDebug(" mouse sent remote data3 "); + state->mouse_state = REMOTE1; - return 1; // now done - break; + return 1; // now done + break; - case STATUS1: // send data - PushToOutputQueue(dev, 0x0, OVERWRITE, DATA, MOUSE); - PrintDebug(" mouse sent status data1 "); - state->mouse_state = STATUS2; + case STATUS1: // send data + PushToOutputQueue(dev, 0x0, OVERWRITE, DATA, MOUSE); + PrintDebug(" mouse sent status data1 "); + state->mouse_state = STATUS2; - return 0; - break; + return 0; + break; - case STATUS2: // send data - PushToOutputQueue(dev, 0x0, OVERWRITE, DATA, MOUSE); - PrintDebug(" mouse sent status data2 "); - state->mouse_state = STATUS3; + case STATUS2: // send data + PushToOutputQueue(dev, 0x0, OVERWRITE, DATA, MOUSE); + PrintDebug(" mouse sent status data2 "); + state->mouse_state = STATUS3; - return 0; - break; + return 0; + break; - case STATUS3: // send data - PushToOutputQueue(dev, 0x0, OVERWRITE, DATA, MOUSE); - PrintDebug(" mouse sent status data3 "); - state->mouse_state = STREAM1; + case STATUS3: // send data + PushToOutputQueue(dev, 0x0, OVERWRITE, DATA, MOUSE); + PrintDebug(" mouse sent status data3 "); + state->mouse_state = STREAM1; - return 1; // now done - break; + return 1; // now done + break; - case DEVICE1: // send device id - PushToOutputQueue(dev, 0x0, OVERWRITE, DATA, MOUSE); - PrintDebug(" mouse sent device id "); - state->mouse_state = STREAM1; + case DEVICE1: // send device id + PushToOutputQueue(dev, 0x0, OVERWRITE, DATA, MOUSE); + PrintDebug(" mouse sent device id "); + state->mouse_state = STREAM1; - return 1; // now done - break; + return 1; // now done + break; - default: - PrintDebug(" mouse has no data "); - return 1; // done - break; - } + default: + PrintDebug(" mouse has no data "); + return 1; // done + break; + } } static int mouse_write_output(struct vm_device * dev, uchar_t data) { - struct keyboard_internal * state = (struct keyboard_internal *)(dev->private_data); - - switch (state->mouse_state) { - case STREAM1: - case STREAM2: - case STREAM3: - case REMOTE1: - case REMOTE2: - case REMOTE3: - switch (data) { - - case 0xff: //reset - PushToOutputQueue(dev, 0xfe, OVERWRITE, DATA, MOUSE) ; // no mouse! - PrintDebug(" mouse reset begins (no mouse) "); - - return 1; // not done; - break; - - /* - case 0xff: //reset - PushToOutputQueue(dev,0xfa,OVERWRITE,DATA,MOUSE) ; - PrintDebug(" mouse reset begins "); - state->mouse_done_after_ack=0; - state->mouse_needs_ack=1; - state->mouse_state=RESET1; - return 0; // not done; - break; - */ - case 0xfe: //resend - PushToOutputQueue(dev, 0xfa, OVERWRITE, DATA, MOUSE) ; - PrintDebug(" mouse resend begins "); - state->mouse_done_after_ack = 0; - state->mouse_needs_ack = 0; - state->mouse_state = STREAM1; - return 0; // not done - break; + struct keyboard_internal * state = (struct keyboard_internal *)(dev->private_data); + + switch (state->mouse_state) { + case STREAM1: + case STREAM2: + case STREAM3: + case REMOTE1: + case REMOTE2: + case REMOTE3: + switch (data) { + + case 0xff: //reset + PushToOutputQueue(dev, 0xfe, OVERWRITE, DATA, MOUSE) ; // no mouse! + PrintDebug(" mouse reset begins (no mouse) "); + + return 1; // not done; + break; + + /* + case 0xff: //reset + PushToOutputQueue(dev,0xfa,OVERWRITE,DATA,MOUSE) ; + PrintDebug(" mouse reset begins "); + state->mouse_done_after_ack=0; + state->mouse_needs_ack=1; + state->mouse_state=RESET1; + return 0; // not done; + break; + */ + case 0xfe: //resend + PushToOutputQueue(dev, 0xfa, OVERWRITE, DATA, MOUSE) ; + PrintDebug(" mouse resend begins "); + state->mouse_done_after_ack = 0; + state->mouse_needs_ack = 0; + state->mouse_state = STREAM1; + return 0; // not done + break; - case 0xf6: // set defaults - PushToOutputQueue(dev, 0xfa, OVERWRITE, DATA, MOUSE) ; - PrintDebug(" mouse set defaults "); - state->mouse_done_after_ack = 1; - state->mouse_needs_ack = 1; - state->mouse_state = STREAM1; - return 0; // not done - break; + case 0xf6: // set defaults + PushToOutputQueue(dev, 0xfa, OVERWRITE, DATA, MOUSE) ; + PrintDebug(" mouse set defaults "); + state->mouse_done_after_ack = 1; + state->mouse_needs_ack = 1; + state->mouse_state = STREAM1; + return 0; // not done + break; - case 0xf5: // disable data reporting - PushToOutputQueue(dev, 0xfa, OVERWRITE, DATA, MOUSE) ; - state->mouse_done_after_ack = 1; - state->mouse_needs_ack = 1; - PrintDebug(" mouse disable data reporting "); - state->mouse_state = STREAM1; - return 0; // not done - break; + case 0xf5: // disable data reporting + PushToOutputQueue(dev, 0xfa, OVERWRITE, DATA, MOUSE) ; + state->mouse_done_after_ack = 1; + state->mouse_needs_ack = 1; + PrintDebug(" mouse disable data reporting "); + state->mouse_state = STREAM1; + return 0; // not done + break; - case 0xf4: // enable data reporting - PushToOutputQueue(dev, 0xfa, OVERWRITE, DATA, MOUSE) ; - state->mouse_done_after_ack = 1; - state->mouse_needs_ack = 1; - PrintDebug(" mouse enable data reporting "); - state->mouse_state = STREAM1; - return 0; // not done - break; + case 0xf4: // enable data reporting + PushToOutputQueue(dev, 0xfa, OVERWRITE, DATA, MOUSE) ; + state->mouse_done_after_ack = 1; + state->mouse_needs_ack = 1; + PrintDebug(" mouse enable data reporting "); + state->mouse_state = STREAM1; + return 0; // not done + break; - case 0xf3: // set sample rate - PushToOutputQueue(dev, 0xfa, OVERWRITE, DATA, MOUSE) ; - state->mouse_done_after_ack = 0; - state->mouse_needs_ack = 1; - PrintDebug(" mouse set sample rate begins "); - state->mouse_state = SAMPLE1; - return 0; // not done - break; + case 0xf3: // set sample rate + PushToOutputQueue(dev, 0xfa, OVERWRITE, DATA, MOUSE) ; + state->mouse_done_after_ack = 0; + state->mouse_needs_ack = 1; + PrintDebug(" mouse set sample rate begins "); + state->mouse_state = SAMPLE1; + return 0; // not done + break; - case 0xf2: // get device id - PushToOutputQueue(dev, 0xfa, OVERWRITE, DATA, MOUSE) ; - state->mouse_done_after_ack = 0; - state->mouse_needs_ack = 1; - PrintDebug(" mouse get device id begins "); - state->mouse_state = DEVICE1; - return 0; // not done - break; + case 0xf2: // get device id + PushToOutputQueue(dev, 0xfa, OVERWRITE, DATA, MOUSE) ; + state->mouse_done_after_ack = 0; + state->mouse_needs_ack = 1; + PrintDebug(" mouse get device id begins "); + state->mouse_state = DEVICE1; + return 0; // not done + break; - case 0xf0: // set remote mode - PushToOutputQueue(dev, 0xfa, OVERWRITE, DATA, MOUSE) ; - state->mouse_done_after_ack = 1; - state->mouse_needs_ack = 1; - PrintDebug(" mouse set remote mode "); - state->mouse_state = REMOTE1; - return 0; // not done - break; - - case 0xee: // set wrap mode - PushToOutputQueue(dev, 0xfa, OVERWRITE, DATA, MOUSE) ; - state->mouse_done_after_ack = 1; - state->mouse_needs_ack = 1; - PrintDebug(" mouse set wrap mode (ignored) "); - state->mouse_state = STREAM1; - return 0; // not done - break; - - case 0xec: // reset wrap mode - PushToOutputQueue(dev, 0xfa, OVERWRITE, DATA, MOUSE) ; - state->mouse_done_after_ack = 1; - state->mouse_needs_ack = 1; - PrintDebug(" mouse reset wrap mode (ignored) "); - state->mouse_state = STREAM1; - return 0; // done - break; - - case 0xeb: // read data - PushToOutputQueue(dev, 0xfa, OVERWRITE, DATA, MOUSE) ; - state->mouse_done_after_ack = 0; - state->mouse_needs_ack = 1; - PrintDebug(" mouse switch to wrap mode (ignored) "); - state->mouse_state = REMOTE1; - return 0; // not done - break; + case 0xf0: // set remote mode + PushToOutputQueue(dev, 0xfa, OVERWRITE, DATA, MOUSE) ; + state->mouse_done_after_ack = 1; + state->mouse_needs_ack = 1; + PrintDebug(" mouse set remote mode "); + state->mouse_state = REMOTE1; + return 0; // not done + break; + + case 0xee: // set wrap mode + PushToOutputQueue(dev, 0xfa, OVERWRITE, DATA, MOUSE) ; + state->mouse_done_after_ack = 1; + state->mouse_needs_ack = 1; + PrintDebug(" mouse set wrap mode (ignored) "); + state->mouse_state = STREAM1; + return 0; // not done + break; + + case 0xec: // reset wrap mode + PushToOutputQueue(dev, 0xfa, OVERWRITE, DATA, MOUSE) ; + state->mouse_done_after_ack = 1; + state->mouse_needs_ack = 1; + PrintDebug(" mouse reset wrap mode (ignored) "); + state->mouse_state = STREAM1; + return 0; // done + break; + + case 0xeb: // read data + PushToOutputQueue(dev, 0xfa, OVERWRITE, DATA, MOUSE) ; + state->mouse_done_after_ack = 0; + state->mouse_needs_ack = 1; + PrintDebug(" mouse switch to wrap mode (ignored) "); + state->mouse_state = REMOTE1; + return 0; // not done + break; - case 0xea: // set stream mode - PushToOutputQueue(dev, 0xfa, OVERWRITE, DATA, MOUSE) ; - state->mouse_done_after_ack = 1; - state->mouse_needs_ack = 1; - PrintDebug(" mouse set stream mode "); - state->mouse_state = STREAM1; - return 0; // not done - break; - - case 0xe9: // status request - PushToOutputQueue(dev, 0xfa, OVERWRITE, DATA, MOUSE) ; - state->mouse_done_after_ack = 0; - state->mouse_needs_ack = 1; - PrintDebug(" mouse status request begins "); - state->mouse_state = STATUS1; - return 0; // notdone - break; - - case 0xe8: // set resolution - PushToOutputQueue(dev, 0xfa, OVERWRITE, DATA, MOUSE) ; - state->mouse_done_after_ack = 0; - state->mouse_needs_ack = 1; - PrintDebug(" mouse set resolution begins "); - state->mouse_state = SETRES1; - return 0; // notdone - break; - - case 0xe7: // set scaling 2:1 - PushToOutputQueue(dev, 0xfa, OVERWRITE, DATA, MOUSE) ; - state->mouse_done_after_ack = 1; - state->mouse_needs_ack = 1; - PrintDebug(" mouse set scaling 2:1 "); - state->mouse_state = STREAM1; - return 0; // not done - break; - - case 0xe6: // set scaling 1:1 - PushToOutputQueue(dev, 0xfa, OVERWRITE, DATA, MOUSE) ; - state->mouse_done_after_ack = 1; - state->mouse_needs_ack = 1; - PrintDebug(" mouse set scaling 1:1 "); - state->mouse_state = STREAM1; - return 0; // done - break; + case 0xea: // set stream mode + PushToOutputQueue(dev, 0xfa, OVERWRITE, DATA, MOUSE) ; + state->mouse_done_after_ack = 1; + state->mouse_needs_ack = 1; + PrintDebug(" mouse set stream mode "); + state->mouse_state = STREAM1; + return 0; // not done + break; + + case 0xe9: // status request + PushToOutputQueue(dev, 0xfa, OVERWRITE, DATA, MOUSE) ; + state->mouse_done_after_ack = 0; + state->mouse_needs_ack = 1; + PrintDebug(" mouse status request begins "); + state->mouse_state = STATUS1; + return 0; // notdone + break; + + case 0xe8: // set resolution + PushToOutputQueue(dev, 0xfa, OVERWRITE, DATA, MOUSE) ; + state->mouse_done_after_ack = 0; + state->mouse_needs_ack = 1; + PrintDebug(" mouse set resolution begins "); + state->mouse_state = SETRES1; + return 0; // notdone + break; + + case 0xe7: // set scaling 2:1 + PushToOutputQueue(dev, 0xfa, OVERWRITE, DATA, MOUSE) ; + state->mouse_done_after_ack = 1; + state->mouse_needs_ack = 1; + PrintDebug(" mouse set scaling 2:1 "); + state->mouse_state = STREAM1; + return 0; // not done + break; + + case 0xe6: // set scaling 1:1 + PushToOutputQueue(dev, 0xfa, OVERWRITE, DATA, MOUSE) ; + state->mouse_done_after_ack = 1; + state->mouse_needs_ack = 1; + PrintDebug(" mouse set scaling 1:1 "); + state->mouse_state = STREAM1; + return 0; // done + break; - default: - PrintDebug(" receiving unknown mouse command (0x%x) in acceptable state ", data); - return 1; // done - break; + default: + PrintDebug(" receiving unknown mouse command (0x%x) in acceptable state ", data); + return 1; // done + break; - } + } - default: - PrintDebug(" receiving mouse output in unhandled state (0x%x) ", state->mouse_state); - break; - return 1; // done? - break; - } - - PrintDebug(" HUH? "); - return 1; // done + default: + PrintDebug(" receiving mouse output in unhandled state (0x%x) ", state->mouse_state); + break; + return 1; // done? + break; + } + + PrintDebug(" HUH? "); + return 1; // done } #if KEYBOARD_DEBUG_80H static int keyboard_write_delay(ushort_t port, - void * src, - uint_t length, - struct vm_device * dev) + void * src, + uint_t length, + struct vm_device * dev) { - if (length == 1) { - PrintDebug("keyboard: write of 0x%x to 80h\n", *((uchar_t*)src)); + if (length == 1) { + PrintDebug("keyboard: write of 0x%x to 80h\n", *((uchar_t*)src)); - return 1; - } else { - PrintDebug("keyboard: write of >1 byte to 80h\n", *((uchar_t*)src)); + return 1; + } else { + PrintDebug("keyboard: write of >1 byte to 80h\n", *((uchar_t*)src)); - return length; - } + return length; + } } static int keyboard_read_delay(ushort_t port, - void * dest, - uint_t length, - struct vm_device * dev) + void * dest, + uint_t length, + struct vm_device * dev) { - if (length == 1) { - *((uchar_t*)dest) = v3_inb(port); + if (length == 1) { + *((uchar_t*)dest) = v3_inb(port); - PrintDebug("keyboard: read of 0x%x from 80h\n", *((uchar_t*)dest)); + PrintDebug("keyboard: read of 0x%x from 80h\n", *((uchar_t*)dest)); - return 1; - } else { - PrintDebug("keyboard: read of >1 byte from 80h\n"); + return 1; + } else { + PrintDebug("keyboard: read of >1 byte from 80h\n"); - return length; - } + return length; + } } #endif @@ -791,196 +791,196 @@ static int keyboard_write_command(ushort_t port, uint_t length, struct vm_device * dev) { - struct keyboard_internal *state = (struct keyboard_internal *)(dev->private_data); - uchar_t cmd; + struct keyboard_internal *state = (struct keyboard_internal *)(dev->private_data); + uchar_t cmd; - // Should always be single byte write + // Should always be single byte write - if (length != 1) { - PrintError("keyboard: write of >1 bytes (%d) to 64h\n", length); - return -1; - } + if (length != 1) { + PrintError("keyboard: write of >1 bytes (%d) to 64h\n", length); + return -1; + } - cmd = *((uchar_t*)src); + cmd = *((uchar_t*)src); - if (state->state != NORMAL) { - PrintDebug("keyboard: warning - receiving command on 64h but state != NORMAL\n"); - } + if (state->state != NORMAL) { + PrintDebug("keyboard: warning - receiving command on 64h but state != NORMAL\n"); + } - PrintDebug("keyboard: command 0x%x on 64h\n", cmd); - - switch (cmd) { - - case 0x20: // READ COMMAND BYTE (returned in 60h) - PushToOutputQueue(dev, state->cmd_byte, OVERWRITE, COMMAND,KEYBOARD); - state->state = NORMAL; // the next read on 0x60 will get the right data - PrintDebug("keyboard: command byte 0x%x returned\n", state->cmd_byte); - break; - - case 0x60: // WRITE COMMAND BYTE (read from 60h) - state->state = WRITING_CMD_BYTE; // we need to make sure we send the next 0x60 byte appropriately - PrintDebug("keyboard: prepare to write command byte\n"); - break; - - // case 0x90-9f - write to output port (?) - - case 0xa1: // Get version number - PushToOutputQueue(dev, 0, OVERWRITE, COMMAND, KEYBOARD); - state->state = NORMAL; - PrintDebug("keyboard: version number 0x0 returned\n"); - break; - - case 0xa4: // is password installed? send result to 0x60 - // we don't support passwords - PushToOutputQueue(dev, 0xf1, OVERWRITE, COMMAND, KEYBOARD); - PrintDebug("keyboard: password not installed\n"); - state->state = NORMAL; - break; - - case 0xa5: // new password will arrive on 0x60 - state->state = TRANSMIT_PASSWD; - PrintDebug("keyboard: pepare to transmit password\n"); - break; - - case 0xa6: // check passwd; - // since we do not support passwords, we will simply ignore this - // the implication is that any password check immediately succeeds - // with a blank password - state->state = NORMAL; - PrintDebug("keyboard: password check succeeded\n"); - break; - - case 0xa7: // disable mouse - state->cmd_byte |= CMD_MOUSE_DISABLE; - state->state = NORMAL; - PrintDebug("keyboard: mouse disabled\n"); - break; - - case 0xa8: // enable mouse - state->cmd_byte &= ~CMD_MOUSE_DISABLE; - state->state = NORMAL; - PrintDebug("keyboard: mouse enabled\n"); - break; - - case 0xa9: // mouse interface test (always succeeds) - PushToOutputQueue(dev, 0, OVERWRITE, COMMAND, KEYBOARD); - PrintDebug("keyboard: mouse interface test succeeded\n"); - state->state = NORMAL; - break; - - case 0xaa: // controller self test (always succeeds) - PushToOutputQueue(dev, 0x55, OVERWRITE, COMMAND, KEYBOARD); - PrintDebug("keyboard: controller self test succeeded\n"); - state->state = NORMAL; - break; - - case 0xab: // keyboard interface test (always succeeds) - PushToOutputQueue(dev, 0, OVERWRITE, COMMAND, KEYBOARD); - state->state = NORMAL; - PrintDebug("keyboard: keyboard interface test succeeded\n"); - break; - - case 0xad: // disable keyboard - state->cmd_byte |= CMD_DISABLE; - state->state = NORMAL; - PrintDebug("keyboard: keyboard disabled\n"); - break; - - case 0xae: // enable keyboard - state->cmd_byte &= ~CMD_DISABLE; - state->state = NORMAL; - PrintDebug("keyboard: keyboard enabled\n"); - break; - - case 0xaf: // get version - PushToOutputQueue(dev, 0x00, OVERWRITE, COMMAND, KEYBOARD); - state->state = NORMAL; - PrintDebug("keyboard: version 0 returned \n"); - break; - - case 0xd0: // return microcontroller output on 60h - PushToOutputQueue(dev, state->output_byte, OVERWRITE, COMMAND, KEYBOARD); - state->state = NORMAL; - PrintDebug("keyboard: output byte 0x%x returned\n", state->output_byte); - break; - - case 0xd1: // request to write next byte on 60h to the microcontroller output port - state->state = WRITING_OUTPUT_PORT; - PrintDebug("keyboard: prepare to write output byte\n"); - break; - - case 0xd2: // write keyboard buffer (inject key) - state->state = INJECTING_KEY; - PrintDebug("keyboard: prepare to inject key\n"); - break; - - case 0xd3: // write mouse buffer (inject mouse) - state->state = INJECTING_MOUSE; - PrintDebug("keyboard: prepare to inject mouse\n"); - break; - - case 0xd4: // write mouse device (command to mouse?) - state->state = IN_MOUSE; - PrintDebug("keyboard: prepare to inject mouse command\n"); - break; - - case 0xc0: // read input port - PushToOutputQueue(dev, state->input_byte, OVERWRITE, COMMAND, KEYBOARD); - state->state = NORMAL; - PrintDebug("keyboard: input byte 0x%x returned\n", state->input_byte); - break; - - case 0xc1: //copy input port lsn to status msn - state->status_byte &= 0x0f; - state->status_byte |= (state->input_byte & 0xf) << 4; - state->state = NORMAL; - PrintDebug("keyboard: copied input byte lsn to status msn\n"); - break; - - case 0xc2: // copy input port msn to status msn - state->status_byte &= 0x0f; - state->status_byte |= (state->input_byte & 0xf0); - state->state = NORMAL; - PrintDebug("keyboard: copied input byte msn to status msn\n"); - break; + PrintDebug("keyboard: command 0x%x on 64h\n", cmd); + + switch (cmd) { + + case 0x20: // READ COMMAND BYTE (returned in 60h) + PushToOutputQueue(dev, state->cmd_byte, OVERWRITE, COMMAND,KEYBOARD); + state->state = NORMAL; // the next read on 0x60 will get the right data + PrintDebug("keyboard: command byte 0x%x returned\n", state->cmd_byte); + break; + + case 0x60: // WRITE COMMAND BYTE (read from 60h) + state->state = WRITING_CMD_BYTE; // we need to make sure we send the next 0x60 byte appropriately + PrintDebug("keyboard: prepare to write command byte\n"); + break; + + // case 0x90-9f - write to output port (?) + + case 0xa1: // Get version number + PushToOutputQueue(dev, 0, OVERWRITE, COMMAND, KEYBOARD); + state->state = NORMAL; + PrintDebug("keyboard: version number 0x0 returned\n"); + break; + + case 0xa4: // is password installed? send result to 0x60 + // we don't support passwords + PushToOutputQueue(dev, 0xf1, OVERWRITE, COMMAND, KEYBOARD); + PrintDebug("keyboard: password not installed\n"); + state->state = NORMAL; + break; + + case 0xa5: // new password will arrive on 0x60 + state->state = TRANSMIT_PASSWD; + PrintDebug("keyboard: pepare to transmit password\n"); + break; + + case 0xa6: // check passwd; + // since we do not support passwords, we will simply ignore this + // the implication is that any password check immediately succeeds + // with a blank password + state->state = NORMAL; + PrintDebug("keyboard: password check succeeded\n"); + break; + + case 0xa7: // disable mouse + state->cmd_byte |= CMD_MOUSE_DISABLE; + state->state = NORMAL; + PrintDebug("keyboard: mouse disabled\n"); + break; + + case 0xa8: // enable mouse + state->cmd_byte &= ~CMD_MOUSE_DISABLE; + state->state = NORMAL; + PrintDebug("keyboard: mouse enabled\n"); + break; + + case 0xa9: // mouse interface test (always succeeds) + PushToOutputQueue(dev, 0, OVERWRITE, COMMAND, KEYBOARD); + PrintDebug("keyboard: mouse interface test succeeded\n"); + state->state = NORMAL; + break; + + case 0xaa: // controller self test (always succeeds) + PushToOutputQueue(dev, 0x55, OVERWRITE, COMMAND, KEYBOARD); + PrintDebug("keyboard: controller self test succeeded\n"); + state->state = NORMAL; + break; + + case 0xab: // keyboard interface test (always succeeds) + PushToOutputQueue(dev, 0, OVERWRITE, COMMAND, KEYBOARD); + state->state = NORMAL; + PrintDebug("keyboard: keyboard interface test succeeded\n"); + break; + + case 0xad: // disable keyboard + state->cmd_byte |= CMD_DISABLE; + state->state = NORMAL; + PrintDebug("keyboard: keyboard disabled\n"); + break; + + case 0xae: // enable keyboard + state->cmd_byte &= ~CMD_DISABLE; + state->state = NORMAL; + PrintDebug("keyboard: keyboard enabled\n"); + break; + + case 0xaf: // get version + PushToOutputQueue(dev, 0x00, OVERWRITE, COMMAND, KEYBOARD); + state->state = NORMAL; + PrintDebug("keyboard: version 0 returned \n"); + break; + + case 0xd0: // return microcontroller output on 60h + PushToOutputQueue(dev, state->output_byte, OVERWRITE, COMMAND, KEYBOARD); + state->state = NORMAL; + PrintDebug("keyboard: output byte 0x%x returned\n", state->output_byte); + break; + + case 0xd1: // request to write next byte on 60h to the microcontroller output port + state->state = WRITING_OUTPUT_PORT; + PrintDebug("keyboard: prepare to write output byte\n"); + break; + + case 0xd2: // write keyboard buffer (inject key) + state->state = INJECTING_KEY; + PrintDebug("keyboard: prepare to inject key\n"); + break; + + case 0xd3: // write mouse buffer (inject mouse) + state->state = INJECTING_MOUSE; + PrintDebug("keyboard: prepare to inject mouse\n"); + break; + + case 0xd4: // write mouse device (command to mouse?) + state->state = IN_MOUSE; + PrintDebug("keyboard: prepare to inject mouse command\n"); + break; + + case 0xc0: // read input port + PushToOutputQueue(dev, state->input_byte, OVERWRITE, COMMAND, KEYBOARD); + state->state = NORMAL; + PrintDebug("keyboard: input byte 0x%x returned\n", state->input_byte); + break; + + case 0xc1: //copy input port lsn to status msn + state->status_byte &= 0x0f; + state->status_byte |= (state->input_byte & 0xf) << 4; + state->state = NORMAL; + PrintDebug("keyboard: copied input byte lsn to status msn\n"); + break; + + case 0xc2: // copy input port msn to status msn + state->status_byte &= 0x0f; + state->status_byte |= (state->input_byte & 0xf0); + state->state = NORMAL; + PrintDebug("keyboard: copied input byte msn to status msn\n"); + break; - case 0xe0: // read test port - PushToOutputQueue(dev, state->output_byte >> 6, OVERWRITE, COMMAND, KEYBOARD); - state->state = NORMAL; - PrintDebug("keyboard: read 0x%x from test port\n", state->output_byte >> 6); - break; + case 0xe0: // read test port + PushToOutputQueue(dev, state->output_byte >> 6, OVERWRITE, COMMAND, KEYBOARD); + state->state = NORMAL; + PrintDebug("keyboard: read 0x%x from test port\n", state->output_byte >> 6); + break; - case 0xf0: // pulse output port - case 0xf1: // this should pulse 0..3 of cmd_byte on output port - case 0xf2: // instead of what is currently in output_byte (I think) - case 0xf3: // main effect is taht if bit zero is zero - case 0xf4: // should cause reset - case 0xf5: // I doubt anything more recent than a 286 running - case 0xf6: // OS2 with the penalty box will care - case 0xf7: - case 0xf8: - case 0xf9: - case 0xfa: - case 0xfb: - case 0xfc: - case 0xfd: - case 0xfe: - case 0xff: + case 0xf0: // pulse output port + case 0xf1: // this should pulse 0..3 of cmd_byte on output port + case 0xf2: // instead of what is currently in output_byte (I think) + case 0xf3: // main effect is taht if bit zero is zero + case 0xf4: // should cause reset + case 0xf5: // I doubt anything more recent than a 286 running + case 0xf6: // OS2 with the penalty box will care + case 0xf7: + case 0xf8: + case 0xf9: + case 0xfa: + case 0xfb: + case 0xfc: + case 0xfd: + case 0xfe: + case 0xff: - PrintDebug("keyboard: ignoring pulse of 0x%x (low=pulsed) on output port\n", (cmd & 0xf)); - state->state = NORMAL; - break; + PrintDebug("keyboard: ignoring pulse of 0x%x (low=pulsed) on output port\n", (cmd & 0xf)); + state->state = NORMAL; + break; - // case ac diagonstic - returns 16 bytes from keyboard microcontroler on 60h - default: - PrintDebug("keyboard: ignoring command (unimplemented)\n"); - state->state = NORMAL; - break; - } + // case ac diagonstic - returns 16 bytes from keyboard microcontroler on 60h + default: + PrintDebug("keyboard: ignoring command (unimplemented)\n"); + state->state = NORMAL; + break; + } - return 1; + return 1; } @@ -989,21 +989,21 @@ static int keyboard_read_status(ushort_t port, uint_t length, struct vm_device * dev) { - struct keyboard_internal *state = (struct keyboard_internal *)(dev->private_data); + struct keyboard_internal *state = (struct keyboard_internal *)(dev->private_data); - if (length == 1) { + if (length == 1) { - PrintDebug("keyboard: read status (64h): "); + PrintDebug("keyboard: read status (64h): "); - *((uchar_t*)dest) = state->status_byte; + *((uchar_t*)dest) = state->status_byte; - PrintDebug("0x%x\n", *((uchar_t*)dest)); + PrintDebug("0x%x\n", *((uchar_t*)dest)); - return 1; - } else { - PrintError("keyboard: >1 byte read for status (64h)\n"); - return -1; - } + return 1; + } else { + PrintError("keyboard: >1 byte read for status (64h)\n"); + return -1; + } } static int keyboard_write_output(ushort_t port, @@ -1011,95 +1011,95 @@ static int keyboard_write_output(ushort_t port, uint_t length, struct vm_device * dev) { - struct keyboard_internal *state = (struct keyboard_internal *)(dev->private_data); + struct keyboard_internal *state = (struct keyboard_internal *)(dev->private_data); - if (length != 1) { - PrintError("keyboard: write of 60h with >1 byte\n"); - return -1; - } + if (length != 1) { + PrintError("keyboard: write of 60h with >1 byte\n"); + return -1; + } - uchar_t data = *((uchar_t*)src); + uchar_t data = *((uchar_t*)src); - PrintDebug("keyboard: output 0x%x on 60h\n", data); - - switch (state->state) { - case WRITING_CMD_BYTE: - state->cmd_byte = data; - state->state = NORMAL; - PrintDebug("keyboard: wrote new command byte 0x%x\n", state->cmd_byte); - break; - case WRITING_OUTPUT_PORT: - state->output_byte = data; - state->state = NORMAL; - PrintDebug("keyboard: wrote new output byte 0x%x\n", state->output_byte); - break; - case INJECTING_KEY: - PushToOutputQueue(dev, data, OVERWRITE, COMMAND, KEYBOARD); // probably should be a call to deliver_key_to_vmm() - state->state = NORMAL; - PrintDebug("keyboard: injected key 0x%x\n", data); - break; - case INJECTING_MOUSE: - PrintDebug("keyboard: ignoring injected mouse event 0x%x\n", data); - state->state = NORMAL; - break; - case IN_MOUSE: - PrintDebug("keyboard: mouse action: "); - if (mouse_write_output(dev, data)) { - state->state = NORMAL; - } - PrintDebug("\n"); - break; - case TRANSMIT_PASSWD: - if (data) { - //ignore passwd - PrintDebug("keyboard: ignoring password character 0x%x\n",data); - } else { - // end of password - state->state = NORMAL; - PrintDebug("keyboard: done with password\n"); + PrintDebug("keyboard: output 0x%x on 60h\n", data); + + switch (state->state) { + case WRITING_CMD_BYTE: + state->cmd_byte = data; + state->state = NORMAL; + PrintDebug("keyboard: wrote new command byte 0x%x\n", state->cmd_byte); + break; + case WRITING_OUTPUT_PORT: + state->output_byte = data; + state->state = NORMAL; + PrintDebug("keyboard: wrote new output byte 0x%x\n", state->output_byte); + break; + case INJECTING_KEY: + PushToOutputQueue(dev, data, OVERWRITE, COMMAND, KEYBOARD); // probably should be a call to deliver_key_to_vmm() + state->state = NORMAL; + PrintDebug("keyboard: injected key 0x%x\n", data); + break; + case INJECTING_MOUSE: + PrintDebug("keyboard: ignoring injected mouse event 0x%x\n", data); + state->state = NORMAL; + break; + case IN_MOUSE: + PrintDebug("keyboard: mouse action: "); + if (mouse_write_output(dev, data)) { + state->state = NORMAL; + } + PrintDebug("\n"); + break; + case TRANSMIT_PASSWD: + if (data) { + //ignore passwd + PrintDebug("keyboard: ignoring password character 0x%x\n",data); + } else { + // end of password + state->state = NORMAL; + PrintDebug("keyboard: done with password\n"); + } + break; + case NORMAL: + { + // command is being sent to keyboard controller + switch (data) { + case 0xff: // reset + PushToOutputQueue(dev, 0xfa, OVERWRITE, COMMAND, KEYBOARD); // ack + state->state = RESET; + PrintDebug("keyboard: reset complete and acked\n"); + break; + case 0xf5: // disable scanning + case 0xf4: // enable scanning + // ack + PushToOutputQueue(dev, 0xfa, OVERWRITE, COMMAND, KEYBOARD); + // should do something here... PAD + state->state = NORMAL; + PrintDebug("keyboard: %s scanning done and acked\n",data==0xf5 ? "disable" : "enable"); + break; + case 0xfe: // resend + case 0xfd: // set key type make + case 0xfc: // set key typ make/break + case 0xfb: // set key type typematic + case 0xfa: // set all typematic make/break/typematic + case 0xf9: // set all make + case 0xf8: // set all make/break + case 0xf7: // set all typemaktic + case 0xf6: // set defaults + case 0xf3: // set typematic delay/rate + PrintDebug("keyboard: unhandled known command 0x%x on output buffer (60h)\n", data); + break; + default: + PrintDebug("keyboard: unhandled unknown command 0x%x on output buffer (60h)\n", data); + state->status_byte |= 0x1; + break; + } + break; + } + default: + PrintDebug("keyboard: unknown state %x on command 0x%x on output buffer (60h)\n", state->state, data); } - break; - case NORMAL: - { - // command is being sent to keyboard controller - switch (data) { - case 0xff: // reset - PushToOutputQueue(dev, 0xfa, OVERWRITE, COMMAND, KEYBOARD); // ack - state->state = RESET; - PrintDebug("keyboard: reset complete and acked\n"); - break; - case 0xf5: // disable scanning - case 0xf4: // enable scanning - // ack - PushToOutputQueue(dev, 0xfa, OVERWRITE, COMMAND, KEYBOARD); - // should do something here... PAD - state->state = NORMAL; - PrintDebug("keyboard: %s scanning done and acked\n",data==0xf5 ? "disable" : "enable"); - break; - case 0xfe: // resend - case 0xfd: // set key type make - case 0xfc: // set key typ make/break - case 0xfb: // set key type typematic - case 0xfa: // set all typematic make/break/typematic - case 0xf9: // set all make - case 0xf8: // set all make/break - case 0xf7: // set all typemaktic - case 0xf6: // set defaults - case 0xf3: // set typematic delay/rate - PrintDebug("keyboard: unhandled known command 0x%x on output buffer (60h)\n", data); - break; - default: - PrintDebug("keyboard: unhandled unknown command 0x%x on output buffer (60h)\n", data); - state->status_byte |= 0x1; - break; - } - break; - } - default: - PrintDebug("keyboard: unknown state %x on command 0x%x on output buffer (60h)\n", state->state, data); - } - return 1; + return 1; } static int keyboard_read_input(ushort_t port, @@ -1107,40 +1107,40 @@ static int keyboard_read_input(ushort_t port, uint_t length, struct vm_device * dev) { - struct keyboard_internal *state = (struct keyboard_internal *)(dev->private_data); + struct keyboard_internal *state = (struct keyboard_internal *)(dev->private_data); - if (length == 1) { - uchar_t data; - int done_mouse; + if (length == 1) { + uchar_t data; + int done_mouse; - PrintDebug("keyboard: read from input (60h): "); + PrintDebug("keyboard: read from input (60h): "); - if (state->state == IN_MOUSE) { - done_mouse = mouse_read_input(dev); - if (done_mouse) { - state->state = NORMAL; - } - } + if (state->state == IN_MOUSE) { + done_mouse = mouse_read_input(dev); + if (done_mouse) { + state->state = NORMAL; + } + } - PullFromOutputQueue(dev, &data); + PullFromOutputQueue(dev, &data); - if (state->state == RESET) { - // We just delivered the ack for the reset - // now we will ready ourselves to deliver the BAT code (success) - PushToOutputQueue(dev, 0xaa, OVERWRITE, COMMAND, KEYBOARD); - state->state = NORMAL; - PrintDebug(" (in reset, pushing BAT test code 0xaa) "); - } + if (state->state == RESET) { + // We just delivered the ack for the reset + // now we will ready ourselves to deliver the BAT code (success) + PushToOutputQueue(dev, 0xaa, OVERWRITE, COMMAND, KEYBOARD); + state->state = NORMAL; + PrintDebug(" (in reset, pushing BAT test code 0xaa) "); + } - PrintDebug("0x%x\n", data); + PrintDebug("0x%x\n", data); - *((uchar_t*)dest) = data; + *((uchar_t*)dest) = data; - return 1; - } else { - PrintError("keyboard: unknown size read from input (60h)\n"); - return -1; - } + return 1; + } else { + PrintError("keyboard: unknown size read from input (60h)\n"); + return -1; + } } @@ -1150,45 +1150,45 @@ static int keyboard_read_input(ushort_t port, static int keyboard_init_device(struct vm_device * dev) { - // struct keyboard_internal *data = (struct keyboard_internal *) dev->private_data; + // struct keyboard_internal *data = (struct keyboard_internal *) dev->private_data; - PrintDebug("keyboard: init_device\n"); + PrintDebug("keyboard: init_device\n"); - // Would read state here + // Would read state here - keyboard_reset_device(dev); + keyboard_reset_device(dev); - // hook ports - v3_dev_hook_io(dev, KEYBOARD_64H, &keyboard_read_status, &keyboard_write_command); - v3_dev_hook_io(dev, KEYBOARD_60H, &keyboard_read_input, &keyboard_write_output); + // hook ports + v3_dev_hook_io(dev, KEYBOARD_64H, &keyboard_read_status, &keyboard_write_command); + v3_dev_hook_io(dev, KEYBOARD_60H, &keyboard_read_input, &keyboard_write_output); - v3_hook_host_event(dev->vm, HOST_KEYBOARD_EVT, V3_HOST_EVENT_HANDLER(key_event_handler), dev); - v3_hook_host_event(dev->vm, HOST_MOUSE_EVT, V3_HOST_EVENT_HANDLER(mouse_event_handler), dev); + v3_hook_host_event(dev->vm, HOST_KEYBOARD_EVT, V3_HOST_EVENT_HANDLER(key_event_handler), dev); + v3_hook_host_event(dev->vm, HOST_MOUSE_EVT, V3_HOST_EVENT_HANDLER(mouse_event_handler), dev); #if KEYBOARD_DEBUG_80H - v3_dev_hook_io(dev, KEYBOARD_DELAY_80H, &keyboard_read_delay, &keyboard_write_delay); + v3_dev_hook_io(dev, KEYBOARD_DELAY_80H, &keyboard_read_delay, &keyboard_write_delay); #endif - // - // We do not hook the IRQ here. Instead, the underlying device driver - // is responsible to call us back - // + // + // We do not hook the IRQ here. Instead, the underlying device driver + // is responsible to call us back + // - return 0; + return 0; } static int keyboard_deinit_device(struct vm_device *dev) { - v3_dev_unhook_io(dev, KEYBOARD_60H); - v3_dev_unhook_io(dev, KEYBOARD_64H); + v3_dev_unhook_io(dev, KEYBOARD_60H); + v3_dev_unhook_io(dev, KEYBOARD_64H); #if KEYBOARD_DEBUG_80H - v3_dev_unhook_io(dev, KEYBOARD_DELAY_80H); + v3_dev_unhook_io(dev, KEYBOARD_DELAY_80H); #endif - keyboard_reset_device(dev); - return 0; + keyboard_reset_device(dev); + return 0; } @@ -1196,23 +1196,23 @@ static int keyboard_deinit_device(struct vm_device *dev) static struct vm_device_ops dev_ops = { - .init = keyboard_init_device, - .deinit = keyboard_deinit_device, - .reset = keyboard_reset_device, - .start = keyboard_start_device, - .stop = keyboard_stop_device, + .init = keyboard_init_device, + .deinit = keyboard_deinit_device, + .reset = keyboard_reset_device, + .start = keyboard_start_device, + .stop = keyboard_stop_device, }; struct vm_device * v3_create_keyboard() { - struct keyboard_internal * keyboard_state = NULL; + struct keyboard_internal * keyboard_state = NULL; - keyboard_state = (struct keyboard_internal *)V3_Malloc(sizeof(struct keyboard_internal)); + keyboard_state = (struct keyboard_internal *)V3_Malloc(sizeof(struct keyboard_internal)); - struct vm_device *device = v3_create_device("KEYBOARD", &dev_ops, keyboard_state); + struct vm_device *device = v3_create_device("KEYBOARD", &dev_ops, keyboard_state); - return device; + return device; }