X-Git-Url: http://v3vee.org/palacios/gitweb/gitweb.cgi?a=blobdiff_plain;f=palacios%2Fsrc%2Fdevices%2Fide.c;h=f5baf953ac83cb6921bde6f20d3e0c2134d899d6;hb=c30d1b88a60c3a8df426ce81553675bbe4afef52;hp=e8fbdc51c56066ea0f27c45dfe2243ca12b9579f;hpb=28cfe68985ef4360c9bd7428a19c222b295e9d85;p=palacios.git diff --git a/palacios/src/devices/ide.c b/palacios/src/devices/ide.c index e8fbdc5..f5baf95 100644 --- a/palacios/src/devices/ide.c +++ b/palacios/src/devices/ide.c @@ -18,15 +18,15 @@ */ #include +#include #include #include #include #include -#include #include "ide-types.h" #include "atapi-types.h" -#ifndef CONFIG_DEBUG_IDE +#ifndef V3_CONFIG_DEBUG_IDE #undef PrintDebug #define PrintDebug(fmt, args...) #endif @@ -63,6 +63,10 @@ #define DATA_BUFFER_SIZE 2048 +#define ATAPI_BLOCK_SIZE 2048 +#define HD_SECTOR_SIZE 512 + + static const char * ide_pri_port_strs[] = {"PRI_DATA", "PRI_FEATURES", "PRI_SECT_CNT", "PRI_SECT_NUM", "PRI_CYL_LOW", "PRI_CYL_HIGH", "PRI_DRV_SEL", "PRI_CMD", "PRI_CTRL", "PRI_ADDR_REG"}; @@ -76,6 +80,7 @@ static const char * ide_dma_port_strs[] = {"DMA_CMD", NULL, "DMA_STATUS", NULL, "DMA_PRD0", "DMA_PRD1", "DMA_PRD2", "DMA_PRD3"}; +typedef enum {BLOCK_NONE, BLOCK_DISK, BLOCK_CDROM} v3_block_type_t; static inline const char * io_port_to_str(uint16_t port) { if ((port >= PRI_DATA_PORT) && (port <= PRI_CMD_PORT)) { @@ -105,16 +110,16 @@ struct ide_cd_state { }; struct ide_hd_state { - int accessed; + uint32_t accessed; /* this is the multiple sector transfer size as configured for read/write multiple sectors*/ - uint_t mult_sector_num; + uint32_t mult_sector_num; /* This is the current op sector size: * for multiple sector ops this equals mult_sector_num * for standard ops this equals 1 */ - uint_t cur_sector_num; + uint32_t cur_sector_num; }; struct ide_drive { @@ -122,11 +127,7 @@ struct ide_drive { v3_block_type_t drive_type; - union { - struct v3_cd_ops * cd_ops; - struct v3_hd_ops * hd_ops; - }; - + struct v3_dev_blk_ops * ops; union { struct ide_cd_state cd_state; @@ -136,11 +137,11 @@ struct ide_drive { char model[41]; // Where we are in the data transfer - uint_t transfer_index; + uint32_t transfer_index; // the length of a transfer // calculated for easy access - uint_t transfer_length; + uint32_t transfer_length; uint64_t current_lba; @@ -208,7 +209,7 @@ struct ide_channel { struct ide_dma_cmd_reg dma_cmd; struct ide_dma_status_reg dma_status; uint32_t dma_prd_addr; - uint_t dma_tbl_index; + uint32_t dma_tbl_index; }; @@ -220,6 +221,8 @@ struct ide_internal { struct vm_device * pci_bus; struct pci_device * ide_pci; + + struct v3_vm_info * vm; }; @@ -278,11 +281,11 @@ static inline int is_lba_enabled(struct ide_channel * channel) { /* Drive Commands */ -static void ide_raise_irq(struct vm_device * dev, struct ide_channel * channel) { +static void ide_raise_irq(struct ide_internal * ide, struct ide_channel * channel) { if (channel->ctrl_reg.irq_disable == 0) { // PrintError("Raising IDE Interrupt %d\n", channel->irq); channel->dma_status.int_gen = 1; - v3_raise_irq(dev->vm, channel->irq); + v3_raise_irq(ide->vm, channel->irq); } } @@ -334,16 +337,16 @@ static void channel_reset_complete(struct ide_channel * channel) { } -static void ide_abort_command(struct vm_device * dev, struct ide_channel * channel) { +static void ide_abort_command(struct ide_internal * ide, struct ide_channel * channel) { channel->status.val = 0x41; // Error + ready channel->error_reg.val = 0x04; // No idea... - ide_raise_irq(dev, channel); + ide_raise_irq(ide, channel); } -static int dma_read(struct vm_device * dev, struct ide_channel * channel); -static int dma_write(struct vm_device * dev, struct ide_channel * channel); +static int dma_read(struct guest_info * core, struct ide_internal * ide, struct ide_channel * channel); +static int dma_write(struct guest_info * core, struct ide_internal * ide, struct ide_channel * channel); /* ATAPI functions */ @@ -353,8 +356,8 @@ static int dma_write(struct vm_device * dev, struct ide_channel * channel); #include "ata.h" -#ifdef CONFIG_DEBUG_IDE -static void print_prd_table(struct vm_device * dev, struct ide_channel * channel) { +#ifdef V3_CONFIG_DEBUG_IDE +static void print_prd_table(struct ide_internal * ide, struct ide_channel * channel) { struct ide_dma_prd prd_entry; int index = 0; @@ -364,7 +367,7 @@ static void print_prd_table(struct vm_device * dev, struct ide_channel * channel uint32_t prd_entry_addr = channel->dma_prd_addr + (sizeof(struct ide_dma_prd) * index); int ret; - ret = read_guest_pa_memory(dev->vm, prd_entry_addr, sizeof(struct ide_dma_prd), (void *)&prd_entry); + ret = v3_read_gpa_memory(&(ide->vm->cores[0]), prd_entry_addr, sizeof(struct ide_dma_prd), (void *)&prd_entry); if (ret != sizeof(struct ide_dma_prd)) { PrintError("Could not read PRD\n"); @@ -372,7 +375,9 @@ static void print_prd_table(struct vm_device * dev, struct ide_channel * channel } PrintDebug("\tPRD Addr: %x, PRD Len: %d, EOT: %d\n", - prd_entry.base_addr, prd_entry.size, prd_entry.end_of_table); + prd_entry.base_addr, + (prd_entry.size == 0) ? 0x10000 : prd_entry.size, + prd_entry.end_of_table); if (prd_entry.end_of_table) { break; @@ -386,17 +391,17 @@ static void print_prd_table(struct vm_device * dev, struct ide_channel * channel #endif /* IO Operations */ -static int dma_read(struct vm_device * dev, struct ide_channel * channel) { +static int dma_read(struct guest_info * core, struct ide_internal * ide, struct ide_channel * channel) { struct ide_drive * drive = get_selected_drive(channel); // This is at top level scope to do the EOT test at the end - struct ide_dma_prd prd_entry; + struct ide_dma_prd prd_entry = {}; uint_t bytes_left = drive->transfer_length; // Read in the data buffer.... // Read a sector/block at a time until the prd entry is full. -#ifdef CONFIG_DEBUG_IDE - print_prd_table(dev, channel); +#ifdef V3_CONFIG_DEBUG_IDE + print_prd_table(ide, channel); #endif PrintDebug("DMA read for %d bytes\n", bytes_left); @@ -410,7 +415,7 @@ static int dma_read(struct vm_device * dev, struct ide_channel * channel) { PrintDebug("PRD table address = %x\n", channel->dma_prd_addr); - ret = read_guest_pa_memory(dev->vm, prd_entry_addr, sizeof(struct ide_dma_prd), (void *)&prd_entry); + ret = v3_read_gpa_memory(core, prd_entry_addr, sizeof(struct ide_dma_prd), (void *)&prd_entry); if (ret != sizeof(struct ide_dma_prd)) { PrintError("Could not read PRD\n"); @@ -422,7 +427,12 @@ static int dma_read(struct vm_device * dev, struct ide_channel * channel) { // loop through the PRD data.... - prd_bytes_left = prd_entry.size; + if (prd_entry.size == 0) { + // a size of 0 means 64k + prd_bytes_left = 0x10000; + } else { + prd_bytes_left = prd_entry.size; + } while (prd_bytes_left > 0) { @@ -432,7 +442,7 @@ static int dma_read(struct vm_device * dev, struct ide_channel * channel) { bytes_to_write = (prd_bytes_left > HD_SECTOR_SIZE) ? HD_SECTOR_SIZE : prd_bytes_left; - if (ata_read(dev, channel, drive->data_buf, 1) == -1) { + if (ata_read(ide, channel, drive->data_buf, 1) == -1) { PrintError("Failed to read next disk sector\n"); return -1; } @@ -440,16 +450,43 @@ static int dma_read(struct vm_device * dev, struct ide_channel * channel) { if (atapi_cmd_is_data_op(drive->cd_state.atapi_cmd)) { bytes_to_write = (prd_bytes_left > ATAPI_BLOCK_SIZE) ? ATAPI_BLOCK_SIZE : prd_bytes_left; - if (atapi_read_chunk(dev, channel) == -1) { + if (atapi_read_chunk(ide, channel) == -1) { PrintError("Failed to read next disk sector\n"); return -1; } } else { - PrintDebug("DMA of command packet\n"); - PrintError("How does this work???\n"); + /* + PrintError("DMA of command packet\n"); + PrintError("How does this work (ATAPI CMD=%x)???\n", drive->cd_state.atapi_cmd); return -1; + */ + int cmd_ret = 0; + bytes_to_write = (prd_bytes_left > bytes_left) ? bytes_left : prd_bytes_left; prd_bytes_left = bytes_to_write; + + cmd_ret = v3_write_gpa_memory(core, prd_entry.base_addr + prd_offset, + bytes_to_write, drive->data_buf); + + // check cmd_ret + + + bytes_to_write = 0; + prd_bytes_left = 0; + drive->transfer_index += bytes_to_write; + + channel->status.busy = 0; + channel->status.ready = 1; + channel->status.data_req = 0; + channel->status.error = 0; + channel->status.seek_complete = 1; + + channel->dma_status.active = 0; + channel->dma_status.err = 0; + + ide_raise_irq(ide, channel); + + return 0; } } @@ -458,7 +495,7 @@ static int dma_read(struct vm_device * dev, struct ide_channel * channel) { drive->current_lba++; - ret = write_guest_pa_memory(dev->vm, prd_entry.base_addr + prd_offset, bytes_to_write, drive->data_buf); + ret = v3_write_gpa_memory(core, prd_entry.base_addr + prd_offset, bytes_to_write, drive->data_buf); if (ret != bytes_to_write) { PrintError("Failed to copy data into guest memory... (ret=%d)\n", ret); @@ -520,16 +557,16 @@ static int dma_read(struct vm_device * dev, struct ide_channel * channel) { channel->dma_status.err = 0; } - ide_raise_irq(dev, channel); + ide_raise_irq(ide, channel); return 0; } -static int dma_write(struct vm_device * dev, struct ide_channel * channel) { +static int dma_write(struct guest_info * core, struct ide_internal * ide, struct ide_channel * channel) { struct ide_drive * drive = get_selected_drive(channel); // This is at top level scope to do the EOT test at the end - struct ide_dma_prd prd_entry; + struct ide_dma_prd prd_entry = {}; uint_t bytes_left = drive->transfer_length; @@ -544,7 +581,7 @@ static int dma_write(struct vm_device * dev, struct ide_channel * channel) { PrintDebug("PRD Table address = %x\n", channel->dma_prd_addr); - ret = read_guest_pa_memory(dev->vm, prd_entry_addr, sizeof(struct ide_dma_prd), (void *)&prd_entry); + ret = v3_read_gpa_memory(core, prd_entry_addr, sizeof(struct ide_dma_prd), (void *)&prd_entry); if (ret != sizeof(struct ide_dma_prd)) { PrintError("Could not read PRD\n"); @@ -563,7 +600,7 @@ static int dma_write(struct vm_device * dev, struct ide_channel * channel) { bytes_to_write = (prd_bytes_left > HD_SECTOR_SIZE) ? HD_SECTOR_SIZE : prd_bytes_left; - ret = read_guest_pa_memory(dev->vm, prd_entry.base_addr + prd_offset, bytes_to_write, drive->data_buf); + ret = v3_read_gpa_memory(core, prd_entry.base_addr + prd_offset, bytes_to_write, drive->data_buf); if (ret != bytes_to_write) { PrintError("Faild to copy data from guest memory... (ret=%d)\n", ret); @@ -573,7 +610,7 @@ static int dma_write(struct vm_device * dev, struct ide_channel * channel) { PrintDebug("\t DMA ret=%d (prd_bytes_left=%d) (bytes_left=%d)\n", ret, prd_bytes_left, bytes_left); - if (ata_write(dev, channel, drive->data_buf, 1) == -1) { + if (ata_write(ide, channel, drive->data_buf, 1) == -1) { PrintError("Failed to write data to disk\n"); return -1; } @@ -610,7 +647,7 @@ static int dma_write(struct vm_device * dev, struct ide_channel * channel) { channel->dma_status.err = 0; } - ide_raise_irq(dev, channel); + ide_raise_irq(ide, channel); return 0; } @@ -626,9 +663,8 @@ static int dma_write(struct vm_device * dev, struct ide_channel * channel) { #define DMA_CHANNEL_FLAG 0x08 -static int write_dma_port(ushort_t port, void * src, uint_t length, void * private_data) { - struct vm_device * dev = (struct vm_device *)private_data; - struct ide_internal * ide = (struct ide_internal *)(dev->private_data); +static int write_dma_port(struct guest_info * core, ushort_t port, void * src, uint_t length, void * private_data) { + struct ide_internal * ide = (struct ide_internal *)private_data; uint16_t port_offset = port & (DMA_CHANNEL_FLAG - 1); uint_t channel_flag = (port & DMA_CHANNEL_FLAG) >> 3; struct ide_channel * channel = &(ide->channels[channel_flag]); @@ -647,13 +683,13 @@ static int write_dma_port(ushort_t port, void * src, uint_t length, void * priva if (channel->dma_cmd.read == 1) { // DMA Read - if (dma_read(dev, channel) == -1) { + if (dma_read(core, ide, channel) == -1) { PrintError("Failed DMA Read\n"); return -1; } } else { // DMA write - if (dma_write(dev, channel) == -1) { + if (dma_write(core, ide, channel) == -1) { PrintError("Failed DMA Write\n"); return -1; } @@ -709,9 +745,8 @@ static int write_dma_port(ushort_t port, void * src, uint_t length, void * priva } -static int read_dma_port(ushort_t port, void * dst, uint_t length, void * private_data) { - struct vm_device * dev = (struct vm_device *)private_data; - struct ide_internal * ide = (struct ide_internal *)(dev->private_data); +static int read_dma_port(struct guest_info * core, ushort_t port, void * dst, uint_t length, void * private_data) { + struct ide_internal * ide = (struct ide_internal *)private_data; uint16_t port_offset = port & (DMA_CHANNEL_FLAG - 1); uint_t channel_flag = (port & DMA_CHANNEL_FLAG) >> 3; struct ide_channel * channel = &(ide->channels[channel_flag]); @@ -763,8 +798,8 @@ static int read_dma_port(ushort_t port, void * dst, uint_t length, void * privat -static int write_cmd_port(ushort_t port, void * src, uint_t length, struct vm_device * dev) { - struct ide_internal * ide = (struct ide_internal *)(dev->private_data); +static int write_cmd_port(struct guest_info * core, ushort_t port, void * src, uint_t length, void * priv_data) { + struct ide_internal * ide = priv_data; struct ide_channel * channel = get_selected_channel(ide, port); struct ide_drive * drive = get_selected_drive(channel); @@ -784,7 +819,7 @@ static int write_cmd_port(ushort_t port, void * src, uint_t length, struct vm_de drive_reset(drive); // JRL: Should we abort here? - ide_abort_command(dev, channel); + ide_abort_command(ide, channel); } else { atapi_identify_device(drive); @@ -792,7 +827,7 @@ static int write_cmd_port(ushort_t port, void * src, uint_t length, struct vm_de channel->error_reg.val = 0; channel->status.val = 0x58; // ready, data_req, seek_complete - ide_raise_irq(dev, channel); + ide_raise_irq(ide, channel); } break; case 0xec: // Identify Device @@ -800,20 +835,20 @@ static int write_cmd_port(ushort_t port, void * src, uint_t length, struct vm_de drive_reset(drive); // JRL: Should we abort here? - ide_abort_command(dev, channel); + ide_abort_command(ide, channel); } else { ata_identify_device(drive); channel->error_reg.val = 0; channel->status.val = 0x58; - ide_raise_irq(dev, channel); + ide_raise_irq(ide, channel); } break; case 0xa0: // ATAPI Command Packet if (drive->drive_type != BLOCK_CDROM) { - ide_abort_command(dev, channel); + ide_abort_command(ide, channel); } drive->sector_count = 1; @@ -833,7 +868,7 @@ static int write_cmd_port(ushort_t port, void * src, uint_t length, struct vm_de case 0x21: // Read Sectors without Retry drive->hd_state.cur_sector_num = 1; - if (ata_read_sectors(dev, channel) == -1) { + if (ata_read_sectors(ide, channel) == -1) { PrintError("Error reading sectors\n"); return -1; } @@ -842,7 +877,7 @@ static int write_cmd_port(ushort_t port, void * src, uint_t length, struct vm_de case 0x24: // Read Sectors Extended drive->hd_state.cur_sector_num = 1; - if (ata_read_sectors_ext(dev, channel) == -1) { + if (ata_read_sectors_ext(ide, channel) == -1) { PrintError("Error reading extended sectors\n"); return -1; } @@ -852,8 +887,8 @@ static int write_cmd_port(ushort_t port, void * src, uint_t length, struct vm_de case 0xc9: { // Read DMA uint32_t sect_cnt = (drive->sector_count == 0) ? 256 : drive->sector_count; - if (ata_get_lba(dev, channel, &(drive->current_lba)) == -1) { - ide_abort_command(dev, channel); + if (ata_get_lba(ide, channel, &(drive->current_lba)) == -1) { + ide_abort_command(ide, channel); return 0; } @@ -864,7 +899,7 @@ static int write_cmd_port(ushort_t port, void * src, uint_t length, struct vm_de if (channel->dma_status.active == 1) { // DMA Read - if (dma_read(dev, channel) == -1) { + if (dma_read(core, ide, channel) == -1) { PrintError("Failed DMA Read\n"); return -1; } @@ -875,8 +910,8 @@ static int write_cmd_port(ushort_t port, void * src, uint_t length, struct vm_de case 0xca: { // Write DMA uint32_t sect_cnt = (drive->sector_count == 0) ? 256 : drive->sector_count; - if (ata_get_lba(dev, channel, &(drive->current_lba)) == -1) { - ide_abort_command(dev, channel); + if (ata_get_lba(ide, channel, &(drive->current_lba)) == -1) { + ide_abort_command(ide, channel); return 0; } @@ -887,7 +922,7 @@ static int write_cmd_port(ushort_t port, void * src, uint_t length, struct vm_de if (channel->dma_status.active == 1) { // DMA Write - if (dma_write(dev, channel) == -1) { + if (dma_write(core, ide, channel) == -1) { PrintError("Failed DMA Write\n"); return -1; } @@ -906,7 +941,7 @@ static int write_cmd_port(ushort_t port, void * src, uint_t length, struct vm_de case 0x99: // Sleep Now 2 channel->status.val = 0; channel->status.ready = 1; - ide_raise_irq(dev, channel); + ide_raise_irq(ide, channel); break; case 0xef: // Set Features @@ -923,7 +958,7 @@ static int write_cmd_port(ushort_t port, void * src, uint_t length, struct vm_de channel->status.ready = 1; channel->status.seek_complete = 1; - ide_raise_irq(dev, channel); + ide_raise_irq(ide, channel); break; case 0x91: // Initialize Drive Parameters @@ -931,14 +966,14 @@ static int write_cmd_port(ushort_t port, void * src, uint_t length, struct vm_de channel->status.error = 0; channel->status.ready = 1; channel->status.seek_complete = 1; - ide_raise_irq(dev, channel); + ide_raise_irq(ide, channel); break; case 0xc6: { // Set multiple mode (IDE Block mode) // This makes the drive transfer multiple sectors before generating an interrupt uint32_t tmp_sect_num = drive->sector_num; // GCC SUCKS if (tmp_sect_num > MAX_MULT_SECTORS) { - ide_abort_command(dev, channel); + ide_abort_command(ide, channel); break; } @@ -951,10 +986,30 @@ static int write_cmd_port(ushort_t port, void * src, uint_t length, struct vm_de channel->status.ready = 1; channel->status.error = 0; - ide_raise_irq(dev, channel); + ide_raise_irq(ide, channel); break; } + + case 0x08: // Reset Device + drive_reset(drive); + channel->error_reg.val = 0x01; + channel->status.busy = 0; + channel->status.ready = 1; + channel->status.seek_complete = 1; + channel->status.write_fault = 0; + channel->status.error = 0; + break; + + case 0xe5: // Check power mode + drive->sector_count = 0xff; /* 0x00=standby, 0x80=idle, 0xff=active or idle */ + channel->status.busy = 0; + channel->status.ready = 1; + channel->status.write_fault = 0; + channel->status.data_req = 0; + channel->status.error = 0; + break; + case 0xc4: // read multiple sectors drive->hd_state.cur_sector_num = drive->hd_state.mult_sector_num; default: @@ -966,8 +1021,8 @@ static int write_cmd_port(ushort_t port, void * src, uint_t length, struct vm_de } -static int write_data_port(ushort_t port, void * src, uint_t length, struct vm_device * dev) { - struct ide_internal * ide = (struct ide_internal *)(dev->private_data); +static int write_data_port(struct guest_info * core, ushort_t port, void * src, uint_t length, void * priv_data) { + struct ide_internal * ide = priv_data; struct ide_channel * channel = get_selected_channel(ide, port); struct ide_drive * drive = get_selected_drive(channel); @@ -985,7 +1040,7 @@ static int write_data_port(ushort_t port, void * src, uint_t length, struct vm_d return -1; case 0xa0: // ATAPI packet command - if (atapi_handle_packet(dev, channel) == -1) { + if (atapi_handle_packet(core, ide, channel) == -1) { PrintError("Error handling ATAPI packet\n"); return -1; } @@ -1000,7 +1055,7 @@ static int write_data_port(ushort_t port, void * src, uint_t length, struct vm_d } -static int read_hd_data(uint8_t * dst, uint_t length, struct vm_device * dev, struct ide_channel * channel) { +static int read_hd_data(uint8_t * dst, uint_t length, struct ide_internal * ide, struct ide_channel * channel) { struct ide_drive * drive = get_selected_drive(channel); int data_offset = drive->transfer_index % HD_SECTOR_SIZE; @@ -1017,7 +1072,7 @@ static int read_hd_data(uint8_t * dst, uint_t length, struct vm_device * dev, st if ((data_offset == 0) && (drive->transfer_index > 0)) { drive->current_lba++; - if (ata_read(dev, channel, drive->data_buf, 1) == -1) { + if (ata_read(ide, channel, drive->data_buf, 1) == -1) { PrintError("Could not read next disk sector\n"); return -1; } @@ -1061,7 +1116,7 @@ static int read_hd_data(uint8_t * dst, uint_t length, struct vm_device * dev, st drive->irq_flags.io_dir = 1; channel->status.busy = 0; - ide_raise_irq(dev, channel); + ide_raise_irq(ide, channel); } @@ -1070,15 +1125,18 @@ static int read_hd_data(uint8_t * dst, uint_t length, struct vm_device * dev, st -static int read_cd_data(uint8_t * dst, uint_t length, struct vm_device * dev, struct ide_channel * channel) { +static int read_cd_data(uint8_t * dst, uint_t length, struct ide_internal * ide, struct ide_channel * channel) { struct ide_drive * drive = get_selected_drive(channel); int data_offset = drive->transfer_index % ATAPI_BLOCK_SIZE; - int req_offset = drive->transfer_index % drive->req_len; + // int req_offset = drive->transfer_index % drive->req_len; if (drive->cd_state.atapi_cmd != 0x28) { PrintDebug("IDE: Reading CD Data (len=%d) (req_len=%d)\n", length, drive->req_len); + PrintDebug("IDE: transfer len=%d, transfer idx=%d\n", drive->transfer_length, drive->transfer_index); } + + if (drive->transfer_index >= drive->transfer_length) { PrintError("Buffer Overrun... (xfer_len=%d) (cur_idx=%d) (post_idx=%d)\n", drive->transfer_length, drive->transfer_index, @@ -1088,7 +1146,7 @@ static int read_cd_data(uint8_t * dst, uint_t length, struct vm_device * dev, st if ((data_offset == 0) && (drive->transfer_index > 0)) { - if (atapi_update_data_buf(dev, channel) == -1) { + if (atapi_update_data_buf(ide, channel) == -1) { PrintError("Could not update CDROM data buffer\n"); return -1; } @@ -1100,7 +1158,7 @@ static int read_cd_data(uint8_t * dst, uint_t length, struct vm_device * dev, st // Should the req_offset be recalculated here????? - if ((req_offset == 0) && (drive->transfer_index > 0)) { + if (/*(req_offset == 0) &&*/ (drive->transfer_index > 0)) { if (drive->transfer_index < drive->transfer_length) { // An increment is complete, but there is still more data to be transferred... @@ -1109,12 +1167,14 @@ static int read_cd_data(uint8_t * dst, uint_t length, struct vm_device * dev, st drive->irq_flags.c_d = 0; // Update the request length in the cylinder regs - if (atapi_update_req_len(dev, channel, drive->transfer_length - drive->transfer_index) == -1) { + if (atapi_update_req_len(ide, channel, drive->transfer_length - drive->transfer_index) == -1) { PrintError("Could not update request length after completed increment\n"); return -1; } } else { // This was the final read of the request + + drive->req_len = 0; channel->status.data_req = 0; channel->status.ready = 1; @@ -1125,14 +1185,14 @@ static int read_cd_data(uint8_t * dst, uint_t length, struct vm_device * dev, st drive->irq_flags.io_dir = 1; channel->status.busy = 0; - ide_raise_irq(dev, channel); + ide_raise_irq(ide, channel); } return length; } -static int read_drive_id(uint8_t * dst, uint_t length, struct vm_device * dev, struct ide_channel * channel) { +static int read_drive_id( uint8_t * dst, uint_t length, struct ide_internal * ide, struct ide_channel * channel) { struct ide_drive * drive = get_selected_drive(channel); channel->status.busy = 0; @@ -1154,25 +1214,25 @@ static int read_drive_id(uint8_t * dst, uint_t length, struct vm_device * dev, s } -static int ide_read_data_port(ushort_t port, void * dst, uint_t length, struct vm_device * dev) { - struct ide_internal * ide = (struct ide_internal *)(dev->private_data); +static int ide_read_data_port(struct guest_info * core, ushort_t port, void * dst, uint_t length, void * priv_data) { + struct ide_internal * ide = priv_data; struct ide_channel * channel = get_selected_channel(ide, port); struct ide_drive * drive = get_selected_drive(channel); - PrintDebug("IDE: Reading Data Port %x (len=%d)\n", port, length); + // PrintDebug("IDE: Reading Data Port %x (len=%d)\n", port, length); if ((channel->cmd_reg == 0xec) || (channel->cmd_reg == 0xa1)) { - return read_drive_id((uint8_t *)dst, length, dev, channel); + return read_drive_id((uint8_t *)dst, length, ide, channel); } if (drive->drive_type == BLOCK_CDROM) { - if (read_cd_data((uint8_t *)dst, length, dev, channel) == -1) { - PrintError("IDE: Could not read CD Data\n"); + if (read_cd_data((uint8_t *)dst, length, ide, channel) == -1) { + PrintError("IDE: Could not read CD Data (atapi cmd=%x)\n", drive->cd_state.atapi_cmd); return -1; } } else if (drive->drive_type == BLOCK_DISK) { - if (read_hd_data((uint8_t *)dst, length, dev, channel) == -1) { + if (read_hd_data((uint8_t *)dst, length, ide, channel) == -1) { PrintError("IDE: Could not read HD Data\n"); return -1; } @@ -1183,8 +1243,8 @@ static int ide_read_data_port(ushort_t port, void * dst, uint_t length, struct v return length; } -static int write_port_std(ushort_t port, void * src, uint_t length, struct vm_device * dev) { - struct ide_internal * ide = (struct ide_internal *)(dev->private_data); +static int write_port_std(struct guest_info * core, ushort_t port, void * src, uint_t length, void * priv_data) { + struct ide_internal * ide = priv_data; struct ide_channel * channel = get_selected_channel(ide, port); struct ide_drive * drive = get_selected_drive(channel); @@ -1254,6 +1314,15 @@ static int write_port_std(ushort_t port, void * src, uint_t length, struct vm_de PrintDebug("Attempting to select a non-present drive\n"); channel->error_reg.abort = 1; channel->status.error = 1; + } else { + channel->status.busy = 0; + channel->status.ready = 1; + channel->status.data_req = 0; + channel->status.error = 0; + channel->status.seek_complete = 1; + + channel->dma_status.active = 0; + channel->dma_status.err = 0; } break; @@ -1266,8 +1335,8 @@ static int write_port_std(ushort_t port, void * src, uint_t length, struct vm_de } -static int read_port_std(ushort_t port, void * dst, uint_t length, struct vm_device * dev) { - struct ide_internal * ide = (struct ide_internal *)(dev->private_data); +static int read_port_std(struct guest_info * core, ushort_t port, void * dst, uint_t length, void * priv_data) { + struct ide_internal * ide = priv_data; struct ide_channel * channel = get_selected_channel(ide, port); struct ide_drive * drive = get_selected_drive(channel); @@ -1372,7 +1441,7 @@ static void init_drive(struct ide_drive * drive) { drive->private_data = NULL; - drive->cd_ops = NULL; + drive->ops = NULL; } static void init_channel(struct ide_channel * channel) { @@ -1399,13 +1468,16 @@ static void init_channel(struct ide_channel * channel) { static int pci_config_update(uint_t reg_num, void * src, uint_t length, void * private_data) { PrintDebug("PCI Config Update\n"); - PrintDebug("\t\tInterupt register (Dev=%s), irq=%d\n", pci_dev->name, pci_dev->config_header.intr_line); + /* + struct ide_internal * ide = (struct ide_internal *)(private_data); + + PrintDebug("\t\tInterupt register (Dev=%s), irq=%d\n", ide->ide_pci->name, ide->ide_pci->config_header.intr_line); + */ return 0; } -static int init_ide_state(struct vm_device * dev) { - struct ide_internal * ide = (struct ide_internal *)(dev->private_data); +static int init_ide_state(struct ide_internal * ide) { int i; /* @@ -1426,120 +1498,337 @@ static int init_ide_state(struct vm_device * dev) { -static int ide_free(struct vm_device * dev) { - // unhook io ports.... +static int ide_free(struct ide_internal * ide) { + // deregister from PCI? + + V3_Free(ide); + return 0; } +#ifdef V3_CONFIG_CHECKPOINT -static struct v3_device_ops dev_ops = { - .free = ide_free, - .reset = NULL, - .start = NULL, - .stop = NULL, -}; +#include +static int ide_save(struct v3_chkpt_ctx * ctx, void * private_data) { + struct ide_internal * ide = (struct ide_internal *)private_data; + int ch_num = 0; + int drive_num = 0; + char buf[128]; + + for (ch_num = 0; ch_num < 2; ch_num++) { + struct v3_chkpt_ctx * ch_ctx = NULL; + struct ide_channel * ch = &(ide->channels[ch_num]); + snprintf(buf, 128, "channel-%d", ch_num); + ch_ctx = v3_chkpt_open_ctx(ctx->chkpt, ctx, buf); -static int ide_init(struct guest_info * vm, void * cfg_data) { - struct ide_internal * ide = (struct ide_internal *)V3_Malloc(sizeof(struct ide_internal)); - struct ide_cfg * cfg = (struct ide_cfg *)(cfg_data); + v3_chkpt_save_8(ch_ctx, "ERROR", &(ch->error_reg.val)); + v3_chkpt_save_8(ch_ctx, "FEATURES", &(ch->features.val)); + v3_chkpt_save_8(ch_ctx, "DRIVE_HEAD", &(ch->drive_head.val)); + v3_chkpt_save_8(ch_ctx, "STATUS", &(ch->status.val)); + v3_chkpt_save_8(ch_ctx, "CMD_REG", &(ch->cmd_reg)); + v3_chkpt_save_8(ch_ctx, "CTRL_REG", &(ch->ctrl_reg.val)); + v3_chkpt_save_8(ch_ctx, "DMA_CMD", &(ch->dma_cmd.val)); + v3_chkpt_save_8(ch_ctx, "DMA_STATUS", &(ch->dma_status.val)); + v3_chkpt_save_32(ch_ctx, "PRD_ADDR", &(ch->dma_prd_addr)); + v3_chkpt_save_32(ch_ctx, "DMA_TBL_IDX", &(ch->dma_tbl_index)); + + + for (drive_num = 0; drive_num < 2; drive_num++) { + struct v3_chkpt_ctx * drive_ctx = NULL; + struct ide_drive * drive = &(ch->drives[drive_num]); + + snprintf(buf, 128, "drive-%d-%d", ch_num, drive_num); + drive_ctx = v3_chkpt_open_ctx(ctx->chkpt, ch_ctx, buf); + + v3_chkpt_save_8(drive_ctx, "DRIVE_TYPE", &(drive->drive_type)); + v3_chkpt_save_8(drive_ctx, "SECTOR_COUNT", &(drive->sector_count)); + v3_chkpt_save_8(drive_ctx, "SECTOR_NUM", &(drive->sector_num)); + v3_chkpt_save_16(drive_ctx, "CYLINDER", &(drive->cylinder)); + + v3_chkpt_save_64(drive_ctx, "CURRENT_LBA", &(drive->current_lba)); + v3_chkpt_save_32(drive_ctx, "TRANSFER_LENGTH", &(drive->transfer_length)); + v3_chkpt_save_32(drive_ctx, "TRANSFER_INDEX", &(drive->transfer_index)); + + v3_chkpt_save(drive_ctx, "DATA_BUF", DATA_BUFFER_SIZE, drive->data_buf); + + + /* For now we'll just pack the type specific data at the end... */ + /* We should probably add a new context here in the future... */ + if (drive->drive_type == BLOCK_CDROM) { + v3_chkpt_save(drive_ctx, "ATAPI_SENSE_DATA", 18, drive->cd_state.sense.buf); + v3_chkpt_save_8(drive_ctx, "ATAPI_CMD", &(drive->cd_state.atapi_cmd)); + v3_chkpt_save(drive_ctx, "ATAPI_ERR_RECOVERY", 12, drive->cd_state.err_recovery.buf); + } else if (drive->drive_type == BLOCK_DISK) { + v3_chkpt_save_32(drive_ctx, "ACCESSED", &(drive->hd_state.accessed)); + v3_chkpt_save_32(drive_ctx, "MULT_SECT_NUM", &(drive->hd_state.mult_sector_num)); + v3_chkpt_save_32(drive_ctx, "CUR_SECT_NUM", &(drive->hd_state.cur_sector_num)); + } + } + } + + return 0; +} + + + +static int ide_load(struct v3_chkpt_ctx * ctx, void * private_data) { + struct ide_internal * ide = (struct ide_internal *)private_data; + int ch_num = 0; + int drive_num = 0; + char buf[128]; - PrintDebug("IDE: Initializing IDE\n"); - memset(ide, 0, sizeof(struct ide_internal)); + for (ch_num = 0; ch_num < 2; ch_num++) { + struct v3_chkpt_ctx * ch_ctx = NULL; + struct ide_channel * ch = &(ide->channels[ch_num]); - if (cfg->pci != NULL) { - if (cfg->southbridge == NULL) { - PrintError("PCI Enabled BUT southbridge is NULL\n"); - return -1; + snprintf(buf, 128, "channel-%d", ch_num); + ch_ctx = v3_chkpt_open_ctx(ctx->chkpt, ctx, buf); + + v3_chkpt_load_8(ch_ctx, "ERROR", &(ch->error_reg.val)); + v3_chkpt_load_8(ch_ctx, "FEATURES", &(ch->features.val)); + v3_chkpt_load_8(ch_ctx, "DRIVE_HEAD", &(ch->drive_head.val)); + v3_chkpt_load_8(ch_ctx, "STATUS", &(ch->status.val)); + v3_chkpt_load_8(ch_ctx, "CMD_REG", &(ch->cmd_reg)); + v3_chkpt_load_8(ch_ctx, "CTRL_REG", &(ch->ctrl_reg.val)); + v3_chkpt_load_8(ch_ctx, "DMA_CMD", &(ch->dma_cmd.val)); + v3_chkpt_load_8(ch_ctx, "DMA_STATUS", &(ch->dma_status.val)); + v3_chkpt_load_32(ch_ctx, "PRD_ADDR", &(ch->dma_prd_addr)); + v3_chkpt_load_32(ch_ctx, "DMA_TBL_IDX", &(ch->dma_tbl_index)); + + + for (drive_num = 0; drive_num < 2; drive_num++) { + struct v3_chkpt_ctx * drive_ctx = NULL; + struct ide_drive * drive = &(ch->drives[drive_num]); + + snprintf(buf, 128, "drive-%d-%d", ch_num, drive_num); + drive_ctx = v3_chkpt_open_ctx(ctx->chkpt, ch_ctx, buf); + + v3_chkpt_load_8(drive_ctx, "DRIVE_TYPE", &(drive->drive_type)); + v3_chkpt_load_8(drive_ctx, "SECTOR_COUNT", &(drive->sector_count)); + v3_chkpt_load_8(drive_ctx, "SECTOR_NUM", &(drive->sector_num)); + v3_chkpt_load_16(drive_ctx, "CYLINDER", &(drive->cylinder)); + + v3_chkpt_load_64(drive_ctx, "CURRENT_LBA", &(drive->current_lba)); + v3_chkpt_load_32(drive_ctx, "TRANSFER_LENGTH", &(drive->transfer_length)); + v3_chkpt_load_32(drive_ctx, "TRANSFER_INDEX", &(drive->transfer_index)); + + v3_chkpt_load(drive_ctx, "DATA_BUF", DATA_BUFFER_SIZE, drive->data_buf); + + + /* For now we'll just pack the type specific data at the end... */ + /* We should probably add a new context here in the future... */ + if (drive->drive_type == BLOCK_CDROM) { + v3_chkpt_load(drive_ctx, "ATAPI_SENSE_DATA", 18, drive->cd_state.sense.buf); + v3_chkpt_load_8(drive_ctx, "ATAPI_CMD", &(drive->cd_state.atapi_cmd)); + v3_chkpt_load(drive_ctx, "ATAPI_ERR_RECOVERY", 12, drive->cd_state.err_recovery.buf); + } else if (drive->drive_type == BLOCK_DISK) { + v3_chkpt_load_32(drive_ctx, "ACCESSED", &(drive->hd_state.accessed)); + v3_chkpt_load_32(drive_ctx, "MULT_SECT_NUM", &(drive->hd_state.mult_sector_num)); + v3_chkpt_load_32(drive_ctx, "CUR_SECT_NUM", &(drive->hd_state.cur_sector_num)); + } } + } - ide->pci_bus = v3_find_dev(vm, (char *)cfg->pci); - - if (ide->pci_bus == NULL) { - PrintError("Could not find PCI device\n"); - return -1; + return 0; +} + + + +#endif + + +static struct v3_device_ops dev_ops = { + .free = (int (*)(void *))ide_free, +#ifdef V3_CONFIG_CHECKPOINT + .save = ide_save, + .load = ide_load +#endif + +}; + + + + +static int connect_fn(struct v3_vm_info * vm, + void * frontend_data, + struct v3_dev_blk_ops * ops, + v3_cfg_tree_t * cfg, + void * private_data) { + struct ide_internal * ide = (struct ide_internal *)(frontend_data); + struct ide_channel * channel = NULL; + struct ide_drive * drive = NULL; + + char * bus_str = v3_cfg_val(cfg, "bus_num"); + char * drive_str = v3_cfg_val(cfg, "drive_num"); + char * type_str = v3_cfg_val(cfg, "type"); + char * model_str = v3_cfg_val(cfg, "model"); + uint_t bus_num = 0; + uint_t drive_num = 0; + + + if ((!type_str) || (!drive_str) || (!bus_str)) { + PrintError("Incomplete IDE Configuration\n"); + return -1; + } + + bus_num = atoi(bus_str); + drive_num = atoi(drive_str); + + channel = &(ide->channels[bus_num]); + drive = &(channel->drives[drive_num]); + + if (drive->drive_type != BLOCK_NONE) { + PrintError("Device slot (bus=%d, drive=%d) already occupied\n", bus_num, drive_num); + return -1; + } + + if (model_str != NULL) { + strncpy(drive->model, model_str, sizeof(drive->model) - 1); + } + + if (strcasecmp(type_str, "cdrom") == 0) { + drive->drive_type = BLOCK_CDROM; + + while (strlen((char *)(drive->model)) < 40) { + strcat((char*)(drive->model), " "); } - struct vm_device * southbridge = v3_find_dev(vm, cfg->southbridge); + } else if (strcasecmp(type_str, "hd") == 0) { + drive->drive_type = BLOCK_DISK; + + drive->hd_state.accessed = 0; + drive->hd_state.mult_sector_num = 1; + + drive->num_sectors = 63; + drive->num_heads = 16; + drive->num_cylinders = (ops->get_capacity(private_data) / HD_SECTOR_SIZE) / (drive->num_sectors * drive->num_heads); + } else { + PrintError("invalid IDE drive type\n"); + return -1; + } + + drive->ops = ops; + + if (ide->ide_pci) { + // Hardcode this for now, but its not a good idea.... + ide->ide_pci->config_space[0x41 + (bus_num * 2)] = 0x80; + } + + drive->private_data = private_data; + + return 0; +} + + + + +static int ide_init(struct v3_vm_info * vm, v3_cfg_tree_t * cfg) { + struct ide_internal * ide = NULL; + char * dev_id = v3_cfg_val(cfg, "ID"); + int ret = 0; + + PrintDebug("IDE: Initializing IDE\n"); + + ide = (struct ide_internal *)V3_Malloc(sizeof(struct ide_internal)); + + if (ide == NULL) { + PrintError("Error allocating IDE state\n"); + return -1; + } + + memset(ide, 0, sizeof(struct ide_internal)); + + ide->vm = vm; + ide->pci_bus = v3_find_dev(vm, v3_cfg_val(cfg, "bus")); + + if (ide->pci_bus != NULL) { + struct vm_device * southbridge = v3_find_dev(vm, v3_cfg_val(cfg, "controller")); if (!southbridge) { PrintError("Could not find southbridge\n"); + V3_Free(ide); return -1; } ide->southbridge = (struct v3_southbridge *)(southbridge->private_data); } - PrintDebug("IDE: Creating IDE bus x 2\n"); - struct vm_device * dev = v3_allocate_device("IDE", &dev_ops, ide); + struct vm_device * dev = v3_add_device(vm, dev_id, &dev_ops, ide); - if (v3_attach_device(vm, dev) == -1) { - PrintError("Could not attach device %s\n", "IDE"); + if (dev == NULL) { + PrintError("Could not attach device %s\n", dev_id); + V3_Free(ide); return -1; } - - if (init_ide_state(dev) == -1) { + if (init_ide_state(ide) == -1) { PrintError("Failed to initialize IDE state\n"); + v3_remove_device(dev); return -1; } PrintDebug("Connecting to IDE IO ports\n"); - v3_dev_hook_io(dev, PRI_DATA_PORT, - &ide_read_data_port, &write_data_port); - v3_dev_hook_io(dev, PRI_FEATURES_PORT, - &read_port_std, &write_port_std); - v3_dev_hook_io(dev, PRI_SECT_CNT_PORT, - &read_port_std, &write_port_std); - v3_dev_hook_io(dev, PRI_SECT_NUM_PORT, - &read_port_std, &write_port_std); - v3_dev_hook_io(dev, PRI_CYL_LOW_PORT, - &read_port_std, &write_port_std); - v3_dev_hook_io(dev, PRI_CYL_HIGH_PORT, - &read_port_std, &write_port_std); - v3_dev_hook_io(dev, PRI_DRV_SEL_PORT, - &read_port_std, &write_port_std); - v3_dev_hook_io(dev, PRI_CMD_PORT, - &read_port_std, &write_cmd_port); - - v3_dev_hook_io(dev, SEC_DATA_PORT, - &ide_read_data_port, &write_data_port); - v3_dev_hook_io(dev, SEC_FEATURES_PORT, - &read_port_std, &write_port_std); - v3_dev_hook_io(dev, SEC_SECT_CNT_PORT, - &read_port_std, &write_port_std); - v3_dev_hook_io(dev, SEC_SECT_NUM_PORT, - &read_port_std, &write_port_std); - v3_dev_hook_io(dev, SEC_CYL_LOW_PORT, - &read_port_std, &write_port_std); - v3_dev_hook_io(dev, SEC_CYL_HIGH_PORT, - &read_port_std, &write_port_std); - v3_dev_hook_io(dev, SEC_DRV_SEL_PORT, - &read_port_std, &write_port_std); - v3_dev_hook_io(dev, SEC_CMD_PORT, - &read_port_std, &write_cmd_port); + ret |= v3_dev_hook_io(dev, PRI_DATA_PORT, + &ide_read_data_port, &write_data_port); + ret |= v3_dev_hook_io(dev, PRI_FEATURES_PORT, + &read_port_std, &write_port_std); + ret |= v3_dev_hook_io(dev, PRI_SECT_CNT_PORT, + &read_port_std, &write_port_std); + ret |= v3_dev_hook_io(dev, PRI_SECT_NUM_PORT, + &read_port_std, &write_port_std); + ret |= v3_dev_hook_io(dev, PRI_CYL_LOW_PORT, + &read_port_std, &write_port_std); + ret |= v3_dev_hook_io(dev, PRI_CYL_HIGH_PORT, + &read_port_std, &write_port_std); + ret |= v3_dev_hook_io(dev, PRI_DRV_SEL_PORT, + &read_port_std, &write_port_std); + ret |= v3_dev_hook_io(dev, PRI_CMD_PORT, + &read_port_std, &write_cmd_port); + + ret |= v3_dev_hook_io(dev, SEC_DATA_PORT, + &ide_read_data_port, &write_data_port); + ret |= v3_dev_hook_io(dev, SEC_FEATURES_PORT, + &read_port_std, &write_port_std); + ret |= v3_dev_hook_io(dev, SEC_SECT_CNT_PORT, + &read_port_std, &write_port_std); + ret |= v3_dev_hook_io(dev, SEC_SECT_NUM_PORT, + &read_port_std, &write_port_std); + ret |= v3_dev_hook_io(dev, SEC_CYL_LOW_PORT, + &read_port_std, &write_port_std); + ret |= v3_dev_hook_io(dev, SEC_CYL_HIGH_PORT, + &read_port_std, &write_port_std); + ret |= v3_dev_hook_io(dev, SEC_DRV_SEL_PORT, + &read_port_std, &write_port_std); + ret |= v3_dev_hook_io(dev, SEC_CMD_PORT, + &read_port_std, &write_cmd_port); - v3_dev_hook_io(dev, PRI_CTRL_PORT, - &read_port_std, &write_port_std); + ret |= v3_dev_hook_io(dev, PRI_CTRL_PORT, + &read_port_std, &write_port_std); - v3_dev_hook_io(dev, SEC_CTRL_PORT, - &read_port_std, &write_port_std); + ret |= v3_dev_hook_io(dev, SEC_CTRL_PORT, + &read_port_std, &write_port_std); - v3_dev_hook_io(dev, SEC_ADDR_REG_PORT, - &read_port_std, &write_port_std); + ret |= v3_dev_hook_io(dev, SEC_ADDR_REG_PORT, + &read_port_std, &write_port_std); - v3_dev_hook_io(dev, PRI_ADDR_REG_PORT, - &read_port_std, &write_port_std); + ret |= v3_dev_hook_io(dev, PRI_ADDR_REG_PORT, + &read_port_std, &write_port_std); + if (ret != 0) { + PrintError("Error hooking IDE IO port\n"); + v3_remove_device(dev); + return -1; + } if (ide->pci_bus) { @@ -1562,14 +1851,15 @@ static int ide_init(struct guest_info * vm, void * cfg_data) { bars[4].io_read = read_dma_port; bars[4].io_write = write_dma_port; - bars[4].private_data = dev; + bars[4].private_data = ide; pci_dev = v3_pci_register_device(ide->pci_bus, PCI_STD_DEVICE, 0, sb_pci->dev_num, 1, "PIIX3_IDE", bars, - pci_config_update, NULL, NULL, dev, dev); + pci_config_update, NULL, NULL, ide); if (pci_dev == NULL) { PrintError("Failed to register IDE BUS %d with PCI\n", i); + v3_remove_device(dev); return -1; } @@ -1595,6 +1885,13 @@ static int ide_init(struct guest_info * vm, void * cfg_data) { } + if (v3_dev_add_blk_frontend(vm, dev_id, connect_fn, (void *)ide) == -1) { + PrintError("Could not register %s as frontend\n", dev_id); + v3_remove_device(dev); + return -1; + } + + PrintDebug("IDE Initialized\n"); return 0; @@ -1606,15 +1903,10 @@ device_register("IDE", ide_init) - - - - - -int v3_ide_get_geometry(struct vm_device * ide_dev, int channel_num, int drive_num, +int v3_ide_get_geometry(void * ide_data, int channel_num, int drive_num, uint32_t * cylinders, uint32_t * heads, uint32_t * sectors) { - struct ide_internal * ide = (struct ide_internal *)(ide_dev->private_data); + struct ide_internal * ide = ide_data; struct ide_channel * channel = &(ide->channels[channel_num]); struct ide_drive * drive = &(channel->drives[drive_num]); @@ -1628,101 +1920,3 @@ int v3_ide_get_geometry(struct vm_device * ide_dev, int channel_num, int drive_n return 0; } - - - - -int v3_ide_register_cdrom(struct vm_device * ide_dev, - uint_t bus_num, - uint_t drive_num, - char * dev_name, - struct v3_cd_ops * ops, - void * private_data) { - - struct ide_internal * ide = (struct ide_internal *)(ide_dev->private_data); - struct ide_channel * channel = NULL; - struct ide_drive * drive = NULL; - - V3_ASSERT((bus_num >= 0) && (bus_num < 2)); - V3_ASSERT((drive_num >= 0) && (drive_num < 2)); - - channel = &(ide->channels[bus_num]); - drive = &(channel->drives[drive_num]); - - if (drive->drive_type != BLOCK_NONE) { - PrintError("Device slot (bus=%d, drive=%d) already occupied\n", bus_num, drive_num); - return -1; - } - - strncpy(drive->model, dev_name, sizeof(drive->model) - 1); - - while (strlen((char *)(drive->model)) < 40) { - strcat((char*)(drive->model), " "); - } - - - drive->drive_type = BLOCK_CDROM; - - drive->cd_ops = ops; - - if (ide->ide_pci) { - // Hardcode this for now, but its not a good idea.... - ide->ide_pci->config_space[0x41 + (bus_num * 2)] = 0x80; - } - - drive->private_data = private_data; - - return 0; -} - - -int v3_ide_register_harddisk(struct vm_device * ide_dev, - uint_t bus_num, - uint_t drive_num, - char * dev_name, - struct v3_hd_ops * ops, - void * private_data) { - - struct ide_internal * ide = (struct ide_internal *)(ide_dev->private_data); - struct ide_channel * channel = NULL; - struct ide_drive * drive = NULL; - - V3_ASSERT((bus_num >= 0) && (bus_num < 2)); - V3_ASSERT((drive_num >= 0) && (drive_num < 2)); - - channel = &(ide->channels[bus_num]); - drive = &(channel->drives[drive_num]); - - if (drive->drive_type != BLOCK_NONE) { - PrintError("Device slot (bus=%d, drive=%d) already occupied\n", bus_num, drive_num); - return -1; - } - - strncpy(drive->model, dev_name, sizeof(drive->model) - 1); - - drive->drive_type = BLOCK_DISK; - - drive->hd_state.accessed = 0; - drive->hd_state.mult_sector_num = 1; - - drive->hd_ops = ops; - - /* this is something of a hack... */ - drive->num_sectors = 63; - drive->num_heads = 16; - drive->num_cylinders = ops->get_capacity(private_data) / (drive->num_sectors * drive->num_heads); - - if (ide->ide_pci) { - // Hardcode this for now, but its not a good idea.... - ide->ide_pci->config_space[0x41 + (bus_num * 2)] = 0x80; - } - - - - drive->private_data = private_data; - - return 0; -} - - -