X-Git-Url: http://v3vee.org/palacios/gitweb/gitweb.cgi?a=blobdiff_plain;f=palacios%2Fsrc%2Fdevices%2F8254.c;h=1a44399569fdd8c7dbcc84939a5661b83ecc1663;hb=5d1bbcc86de011e3f0d115b6f10fd8645cdf855e;hp=0c3608b86d92476531fe254ec5cafb05f56b3be2;hpb=e5e029575affad90c19ca038a3b780820535d421;p=palacios.git diff --git a/palacios/src/devices/8254.c b/palacios/src/devices/8254.c index 0c3608b..1a44399 100644 --- a/palacios/src/devices/8254.c +++ b/palacios/src/devices/8254.c @@ -24,9 +24,10 @@ #include #include #include +#include -#ifndef CONFIG_DEBUG_PIT +#ifndef V3_CONFIG_DEBUG_PIT #undef PrintDebug #define PrintDebug(fmt, args...) #endif @@ -42,17 +43,19 @@ #define CHANNEL1_PORT 0x41 #define CHANNEL2_PORT 0x42 #define COMMAND_PORT 0x43 +#define SPEAKER_PORT 0x61 #define PIT_INTR_NUM 0 +#define PIT_SPEAKER_GATE 0x01 /* The order of these typedefs is important because the numerical values correspond to the * values coming from the io ports */ typedef enum {NOT_RUNNING, PENDING, RUNNING} channel_run_state_t; typedef enum {NOT_WAITING, WAITING_LOBYTE, WAITING_HIBYTE} channel_access_state_t; -typedef enum {LATCH_COUNT, LOBYTE_ONLY, HIBYTE_ONLY, LOBYTE_HIBYTE} channel_access_mode_t; -typedef enum {IRQ_ON_TERM_CNT, ONE_SHOT, RATE_GEN, SQR_WAVE, SW_STROBE, HW_STROBE} channel_op_mode_t; +typedef enum {LATCH_COUNT = 0, LOBYTE_ONLY = 1, HIBYTE_ONLY = 2, LOBYTE_HIBYTE = 3} channel_access_mode_t; +typedef enum {IRQ_ON_TERM_CNT = 0, ONE_SHOT = 1, RATE_GEN = 2, SQR_WAVE = 3, SW_STROBE = 4, HW_STROBE = 5} channel_op_mode_t; struct channel { @@ -84,10 +87,14 @@ struct pit { ullong_t pit_counter; ullong_t pit_reload; + struct v3_timer * timer; + + struct v3_vm_info * vm; struct channel ch_0; struct channel ch_1; struct channel ch_2; + uint8_t speaker; }; @@ -122,11 +129,12 @@ struct pit_rdb_status_word { * This should call out to handle_SQR_WAVE_tics, etc... */ // Returns true if the the output signal changed state -static int handle_crystal_tics(struct vm_device * dev, struct channel * ch, uint_t oscillations) { +static int handle_crystal_tics(struct pit * pit, struct channel * ch, uint_t oscillations) { uint_t channel_cycles = 0; uint_t output_changed = 0; - // PrintDebug("8254 PIT: %d crystal tics\n", oscillations); + // PrintDebug("8254 PIT (channel %d): %d crystal tics\n", + // ch - pit->ch0, oscillations); if (ch->run_state == PENDING) { oscillations--; ch->counter = ch->reload_value; @@ -151,20 +159,16 @@ static int handle_crystal_tics(struct vm_device * dev, struct channel * ch, uint if (ch->counter > oscillations) { ch->counter -= oscillations; + //PrintDebug("8254 PIT: Counter at %u after %u oscillations.\n", + // (unsigned int)ch->counter, oscillations); return output_changed; } else { ushort_t reload_val = ch->reload_value; - if (ch->op_mode == SW_STROBE) { + if ((ch->op_mode == SW_STROBE) || (ch->op_mode == IRQ_ON_TERM_CNT)) { reload_val = 0xffff; } - // TODO: Check this.... - // Is this correct??? - if (reload_val == 0) { - reload_val = 1; - } - oscillations -= ch->counter; ch->counter = 0; channel_cycles = 1; @@ -173,27 +177,43 @@ static int handle_crystal_tics(struct vm_device * dev, struct channel * ch, uint reload_val -= reload_val % 2; } + // TODO: Check this.... + // Is this correct??? + if (reload_val == 0) { + reload_val = 1; + } + channel_cycles += oscillations / reload_val; oscillations = oscillations % reload_val; ch->counter = reload_val - oscillations; + // PrintDebug("8254 PIT: Counter reset to %u.\n", + // (unsigned int)ch->counter); + } - // PrintDebug("8254 PIT: Channel Cycles: %d\n", channel_cycles); + //PrintDebug("8254 PIT: Channel %ld (mode = %u) Cycles: %d\n", + //(ch - &pit->ch_0), ch->op_mode, channel_cycles); - - switch (ch->op_mode) { case IRQ_ON_TERM_CNT: - if ((channel_cycles > 0) && (ch->output_pin == 0)) { - ch->output_pin = 1; - output_changed = 1; + if (channel_cycles > 0) { + if (ch->output_pin == 0) { + ch->output_pin = 1; + output_changed = 1; + } else { + // PrintDebug("8254: Output not changed in TERM_CNT mode.\n"); + } } break; case ONE_SHOT: - if ((channel_cycles > 0) && (ch->output_pin == 0)) { - ch->output_pin = 1; - output_changed = 1; + if (channel_cycles > 0) { + if ((ch->output_pin == 0)) { + ch->output_pin = 1; + output_changed = 1; + } else { + // PrintDebug("8254: Output not changed in ONE_SHOT mode.\n"); + } } break; case RATE_GEN: @@ -209,6 +229,7 @@ static int handle_crystal_tics(struct vm_device * dev, struct channel * ch, uint output_changed = 1; } + break; case SW_STROBE: @@ -233,9 +254,8 @@ static int handle_crystal_tics(struct vm_device * dev, struct channel * ch, uint #include -static void pit_update_time(struct guest_info * info, ullong_t cpu_cycles, ullong_t cpu_freq, void * private_data) { - struct vm_device * dev = (struct vm_device *)private_data; - struct pit * state = (struct pit *)dev->private_data; +static void pit_update_timer(struct guest_info * info, ullong_t cpu_cycles, ullong_t cpu_freq, void * private_data) { + struct pit * state = (struct pit *)private_data; // ullong_t tmp_ctr = state->pit_counter; ullong_t tmp_cycles; uint_t oscillations = 0; @@ -293,31 +313,24 @@ static void pit_update_time(struct guest_info * info, ullong_t cpu_cycles, ullon // update counter with remainder (mod reload) state->pit_counter = state->pit_reload - cpu_cycles; - //PrintDebug("8254 PIT: Handling %d crystal tics\n", oscillations); - if (handle_crystal_tics(dev, &(state->ch_0), oscillations) == 1) { - // raise interrupt - PrintDebug("8254 PIT: Injecting Timer interrupt to guest\n"); - v3_raise_irq(info->vm_info, 0); - } - - //handle_crystal_tics(dev, &(state->ch_1), oscillations); - //handle_crystal_tics(dev, &(state->ch_2), oscillations); - } - + if (oscillations) { + // PrintDebug("8254 PIT: Handling %d crystal tics\n", oscillations); + if (handle_crystal_tics(state, &(state->ch_0), oscillations) == 1) { + // raise interrupt + PrintDebug("8254 PIT: Injecting Timer interrupt to guest (run_state = %d)\n", + state->ch_0.run_state); + v3_raise_irq(info->vm_info, 0); + } + //handle_crystal_tics(state, &(state->ch_1), oscillations); + handle_crystal_tics(state, &(state->ch_2), oscillations); + } + } return; } - -static void pit_advance_time(struct guest_info * core, void * private_data) { - - v3_raise_irq(core->vm_info, 0); -} - - - /* This should call out to handle_SQR_WAVE_write, etc... */ static int handle_channel_write(struct channel * ch, char val) { @@ -413,16 +426,37 @@ static int handle_channel_read(struct channel * ch, char * val) { } +static int handle_speaker_read(uint8_t *speaker, struct channel * ch, char * val) { + *val = *speaker; + if ((*speaker & PIT_SPEAKER_GATE)) { + *val |= (ch->output_pin << 5); + } + + return 0; +} - +static int handle_speaker_write(uint8_t *speaker, struct channel * ch, char val) { + *speaker = (val & ~0x20); + return 0; +} static int handle_channel_cmd(struct channel * ch, struct pit_cmd_word cmd) { - ch->op_mode = cmd.op_mode; - ch->access_mode = cmd.access_mode; + if (cmd.op_mode != ch->op_mode) { + PrintDebug("8254 PIT: Changing channel from op mode %d to op mode %d.\n", + ch->op_mode, cmd.op_mode); + } + if (cmd.access_mode != 0) { + ch->op_mode = cmd.op_mode; + } + if (cmd.access_mode != ch->access_mode) { + PrintDebug("8254 PIT: Changing channel from access mode %d to access mode %d.\n", + ch->access_mode, cmd.access_mode); + } + ch->access_mode = cmd.access_mode; switch (cmd.access_mode) { case LATCH_COUNT: @@ -469,8 +503,8 @@ static int handle_channel_cmd(struct channel * ch, struct pit_cmd_word cmd) { -static int pit_read_channel(struct guest_info * core, ushort_t port, void * dst, uint_t length, struct vm_device * dev) { - struct pit * state = (struct pit *)dev->private_data; +static int pit_read_channel(struct guest_info * core, ushort_t port, void * dst, uint_t length, void * priv_data) { + struct pit * state = (struct pit *)priv_data; char * val = (char *)dst; if (length != 1) { @@ -499,6 +533,12 @@ static int pit_read_channel(struct guest_info * core, ushort_t port, void * dst, return -1; } break; + case SPEAKER_PORT: + if (handle_speaker_read(&state->speaker, &(state->ch_2), val) == -1) { + PrintError("SPEAKER read error\n"); + return -1; + } + break; default: PrintError("8254 PIT: Read from invalid port (%d)\n", port); return -1; @@ -509,8 +549,8 @@ static int pit_read_channel(struct guest_info * core, ushort_t port, void * dst, -static int pit_write_channel(struct guest_info * core, ushort_t port, void * src, uint_t length, struct vm_device * dev) { - struct pit * state = (struct pit *)dev->private_data; +static int pit_write_channel(struct guest_info * core, ushort_t port, void * src, uint_t length, void * priv_data) { + struct pit * state = (struct pit *)priv_data; char val = *(char *)src; if (length != 1) { @@ -540,6 +580,12 @@ static int pit_write_channel(struct guest_info * core, ushort_t port, void * src return -1; } break; + case SPEAKER_PORT: + if (handle_speaker_write(&state->speaker, &(state->ch_2), val) == -1) { + PrintError("SPEAKER write error\n"); + return -1; + } + break; default: PrintError("8254 PIT: Write to invalid port (%d)\n", port); return -1; @@ -551,8 +597,8 @@ static int pit_write_channel(struct guest_info * core, ushort_t port, void * src -static int pit_write_command(struct guest_info * core, ushort_t port, void * src, uint_t length, struct vm_device * dev) { - struct pit * state = (struct pit *)dev->private_data; +static int pit_write_command(struct guest_info * core, ushort_t port, void * src, uint_t length, void * priv_data) { + struct pit * state = (struct pit *)priv_data; struct pit_cmd_word * cmd = (struct pit_cmd_word *)src; PrintDebug("8254 PIT: Write to PIT Command port\n"); @@ -597,9 +643,8 @@ static int pit_write_command(struct guest_info * core, ushort_t port, void * src -static struct vm_timer_ops timer_ops = { - .update_time = pit_update_time, - .advance_timer = pit_advance_time, +static struct v3_timer_ops timer_ops = { + .update_timer = pit_update_timer, }; @@ -624,18 +669,53 @@ static void init_channel(struct channel * ch) { -static int pit_free(struct vm_device * dev) { +static int pit_free(void * private_data) { + struct pit * state = (struct pit *)private_data; + struct guest_info * info = &(state->vm->cores[0]); + + if (state->timer) { + v3_remove_timer(info, state->timer); + } + + V3_Free(state); return 0; } +#ifdef V3_CONFIG_CHECKPOINT +static int pit_save(struct v3_chkpt_ctx * ctx, void * private_data) { + struct pit * pit_state = (struct pit *)private_data; -static struct v3_device_ops dev_ops = { - .free = pit_free, - .reset = NULL, - .start = NULL, - .stop = NULL, + V3_CHKPT_STD_SAVE(ctx, pit_state->pit_counter); + V3_CHKPT_STD_SAVE(ctx, pit_state->pit_reload); + V3_CHKPT_STD_SAVE(ctx, pit_state->ch_0); + V3_CHKPT_STD_SAVE(ctx, pit_state->ch_1); + V3_CHKPT_STD_SAVE(ctx, pit_state->ch_2); + V3_CHKPT_STD_SAVE(ctx, pit_state->speaker); + + return 0; +} + +static int pit_load(struct v3_chkpt_ctx * ctx, void * private_data) { + struct pit * pit_state = (struct pit *)private_data; + + V3_CHKPT_STD_LOAD(ctx, pit_state->pit_counter); + V3_CHKPT_STD_LOAD(ctx, pit_state->pit_reload); + V3_CHKPT_STD_LOAD(ctx, pit_state->ch_0); + V3_CHKPT_STD_LOAD(ctx, pit_state->ch_1); + V3_CHKPT_STD_LOAD(ctx, pit_state->ch_2); + V3_CHKPT_STD_LOAD(ctx, pit_state->speaker); + + return 0; +} +#endif +static struct v3_device_ops dev_ops = { + .free = (int (*)(void *))pit_free, +#ifdef V3_CONFIG_CHECKPOINT + .save = pit_save, + .load = pit_load, +#endif }; #include @@ -644,37 +724,55 @@ static int pit_init(struct v3_vm_info * vm, v3_cfg_tree_t * cfg) { struct pit * pit_state = NULL; struct vm_device * dev = NULL; char * dev_id = v3_cfg_val(cfg, "ID"); - + int ret = 0; + // PIT is only usable in non-multicore environments // just hardcode the core context struct guest_info * info = &(vm->cores[0]); - uint_t cpu_khz = V3_CPU_KHZ(); + uint_t cpu_khz = info->time_state.guest_cpu_freq; ullong_t reload_val = (ullong_t)cpu_khz * 1000; pit_state = (struct pit *)V3_Malloc(sizeof(struct pit)); + V3_ASSERT(pit_state != NULL); + pit_state->speaker = 0; + pit_state->vm = vm; - dev = v3_allocate_device(dev_id, &dev_ops, pit_state); + dev = v3_add_device(vm, dev_id, &dev_ops, pit_state); - if (v3_attach_device(vm, dev) == -1) { + if (dev == NULL) { PrintError("Could not attach device %s\n", dev_id); + V3_Free(pit_state); return -1; } - v3_dev_hook_io(dev, CHANNEL0_PORT, &pit_read_channel, &pit_write_channel); - v3_dev_hook_io(dev, CHANNEL1_PORT, &pit_read_channel, &pit_write_channel); - v3_dev_hook_io(dev, CHANNEL2_PORT, &pit_read_channel, &pit_write_channel); - v3_dev_hook_io(dev, COMMAND_PORT, NULL, &pit_write_command); + ret |= v3_dev_hook_io(dev, CHANNEL0_PORT, &pit_read_channel, &pit_write_channel); + ret |= v3_dev_hook_io(dev, CHANNEL1_PORT, &pit_read_channel, &pit_write_channel); + ret |= v3_dev_hook_io(dev, CHANNEL2_PORT, &pit_read_channel, &pit_write_channel); + ret |= v3_dev_hook_io(dev, COMMAND_PORT, NULL, &pit_write_command); + ret |= v3_dev_hook_io(dev, SPEAKER_PORT, &pit_read_channel, &pit_write_channel); + + if (ret != 0) { + PrintError("8254 PIT: Failed to hook IO ports\n"); + v3_remove_device(dev); + return -1; + } -#ifdef CONFIG_DEBUG_PIT +#ifdef V3_CONFIG_DEBUG_PIT PrintDebug("8254 PIT: OSC_HZ=%d, reload_val=", OSC_HZ); //PrintTrace(reload_val); PrintDebug("\n"); #endif - v3_add_timer(info, &timer_ops, dev); + + pit_state->timer = v3_add_timer(info, &timer_ops, pit_state); + + if (pit_state->timer == NULL) { + v3_remove_device(dev); + return -1; + } // Get cpu frequency and calculate the global pit oscilattor counter/cycle @@ -683,12 +781,11 @@ static int pit_init(struct v3_vm_info * vm, v3_cfg_tree_t * cfg) { pit_state->pit_reload = reload_val; - init_channel(&(pit_state->ch_0)); init_channel(&(pit_state->ch_1)); init_channel(&(pit_state->ch_2)); -#ifdef CONFIG_DEBUG_PIT +#ifdef V3_CONFIG_DEBUG_PIT PrintDebug("8254 PIT: CPU MHZ=%d -- pit count=", cpu_khz / 1000); //PrintTraceLL(pit_state->pit_counter); PrintDebug("\n");