+/* (c) 2008, Jack Lange <jarusl@cs.northwestern.edu> */
+/* (c) 2008, The V3VEE Project <http://www.v3vee.org> */
+
+
#include <palacios/vmm_mem.h>
#include <palacios/vmm.h>
#include <palacios/vmcb.h>
#endif
-
-
-
-
// First Attempt = 494 lines
// current = 106 lines
int handle_cr0_write(struct guest_info * info) {
ret = read_guest_va_memory(info, get_addr_linear(info, info->rip, &(info->segments.cs)), 15, instr);
}
- if (ret != 15) {
+ /* The IFetch will already have faulted in the necessary bytes for the full instruction
+ if (ret != 15) {
// I think we should inject a GPF into the guest
PrintError("Could not read instruction (ret=%d)\n", ret);
return -1;
- }
+ }
+ */
if (v3_decode(info, (addr_t)instr, &dec_instr) == -1) {
PrintError("Could not decode instruction\n");
if (opcode_cmp(V3_OPCODE_LMSW, (const uchar_t *)(dec_instr.opcode)) == 0) {
struct cr0_real *real_cr0 = (struct cr0_real*)&(info->ctrl_regs.cr0);
- struct cr0_real *new_cr0 = (struct cr0_real *)(dec_instr.first_operand.operand);
+ struct cr0_real *new_cr0 = (struct cr0_real *)(dec_instr.src_operand.operand);
uchar_t new_cr0_val;
PrintDebug("LMSW\n");
} else {
// 32 bit registers
struct cr0_32 *real_cr0 = (struct cr0_32*)&(info->ctrl_regs.cr0);
- struct cr0_32 *new_cr0= (struct cr0_32 *)(dec_instr.second_operand.operand);
+ struct cr0_32 *new_cr0= (struct cr0_32 *)(dec_instr.src_operand.operand);
- PrintDebug("OperandVal = %x, length=%d\n", *new_cr0, dec_instr.first_operand.size);
+ PrintDebug("OperandVal = %x, length=%d\n", *new_cr0, dec_instr.src_operand.size);
PrintDebug("Old CR0=%x\n", *real_cr0);
ret = read_guest_va_memory(info, get_addr_linear(info, info->rip, &(info->segments.cs)), 15, instr);
}
- if (ret != 15) {
- // I think we should inject a GPF into the guest
- PrintError("Could not read instruction (ret=%d)\n", ret);
- return -1;
- }
+ /* The IFetch will already have faulted in the necessary bytes for the full instruction
+ if (ret != 15) {
+ // I think we should inject a GPF into the guest
+ PrintError("Could not read instruction (ret=%d)\n", ret);
+ return -1;
+ }
+ */
if (v3_decode(info, (addr_t)instr, &dec_instr) == -1) {
PrintError("Could not decode instruction\n");
}
if (opcode_cmp(V3_OPCODE_MOVCR2, (const uchar_t *)(dec_instr.opcode)) == 0) {
- struct cr0_32 * virt_cr0 = (struct cr0_32 *)(dec_instr.first_operand.operand);
+ struct cr0_32 * virt_cr0 = (struct cr0_32 *)(dec_instr.dst_operand.operand);
struct cr0_32 * real_cr0 = (struct cr0_32 *)&(info->ctrl_regs.cr0);
PrintDebug("MOVCR2\n");
PrintDebug("returned CR0: %x\n", *(uint_t*)virt_cr0);
} else if (opcode_cmp(V3_OPCODE_SMSW, (const uchar_t *)(dec_instr.opcode)) == 0) {
struct cr0_real *real_cr0= (struct cr0_real*)&(info->ctrl_regs.cr0);
- struct cr0_real *virt_cr0 = (struct cr0_real *)(dec_instr.first_operand.operand);
+ struct cr0_real *virt_cr0 = (struct cr0_real *)(dec_instr.dst_operand.operand);
char cr0_val = *(char*)real_cr0 & 0x0f;
PrintDebug("SMSW\n");
-// First Attemp = 256 lines
+// First Attempt = 256 lines
// current = 65 lines
int handle_cr3_write(struct guest_info * info) {
int ret;
ret = read_guest_va_memory(info, get_addr_linear(info, info->rip, &(info->segments.cs)), 15, instr);
}
- if (ret != 15) {
- // I think we should inject a GPF into the guest
- PrintError("Could not read instruction (ret=%d)\n", ret);
- return -1;
- }
+ /* The IFetch will already have faulted in the necessary bytes for the full instruction
+ if (ret != 15) {
+ // I think we should inject a GPF into the guest
+ PrintError("Could not read instruction (ret=%d)\n", ret);
+ return -1;
+ }
+ */
if (v3_decode(info, (addr_t)instr, &dec_instr) == -1) {
PrintError("Could not decode instruction\n");
PrintDebug("CR3 at 0x%x\n", &(info->ctrl_regs.cr3));
if (info->shdw_pg_mode == SHADOW_PAGING) {
- struct cr3_32 * new_cr3 = (struct cr3_32 *)(dec_instr.second_operand.operand);
+ struct cr3_32 * new_cr3 = (struct cr3_32 *)(dec_instr.src_operand.operand);
struct cr3_32 * guest_cr3 = (struct cr3_32 *)&(info->shdw_pg_state.guest_cr3);
struct cr3_32 * shadow_cr3 = (struct cr3_32 *)&(info->shdw_pg_state.shadow_cr3);
+ int cached = 0;
+
PrintDebug("Old Shadow CR3=%x; Old Guest CR3=%x\n",
*(uint_t*)shadow_cr3, *(uint_t*)guest_cr3);
- if (!CR3_32_SAME_BASE(new_cr3, guest_cr3)) {
- addr_t shadow_pt;
+ cached = cache_page_tables32(info, CR3_TO_PDE32(*(addr_t *)new_cr3));
+
+ if (cached == -1) {
+ PrintError("CR3 Cache failed\n");
+ return -1;
+ } else if (cached == 0) {
+ addr_t shadow_pt;
PrintDebug("New CR3 is different - flushing shadow page table\n");
delete_page_tables_pde32((pde32_t *)CR3_TO_PDE32(*(uint_t*)shadow_cr3));
- shadow_pt = create_new_shadow_pt32(info);
+ shadow_pt = create_new_shadow_pt32();
shadow_cr3->pdt_base_addr = PD32_BASE_ADDR(shadow_pt);
- }
+ } else {
+ PrintDebug("Reusing cached shadow Page table\n");
+ }
shadow_cr3->pwt = new_cr3->pwt;
shadow_cr3->pcd = new_cr3->pcd;
ret = read_guest_va_memory(info, get_addr_linear(info, info->rip, &(info->segments.cs)), 15, instr);
}
- if (ret != 15) {
- // I think we should inject a GPF into the guest
- PrintError("Could not read instruction (ret=%d)\n", ret);
- return -1;
- }
+ /* The IFetch will already have faulted in the necessary bytes for the full instruction
+ if (ret != 15) {
+ // I think we should inject a GPF into the guest
+ PrintError("Could not read instruction (ret=%d)\n", ret);
+ return -1;
+ }
+ */
if (v3_decode(info, (addr_t)instr, &dec_instr) == -1) {
PrintError("Could not decode instruction\n");
if (opcode_cmp(V3_OPCODE_MOVCR2, (const uchar_t *)(dec_instr.opcode)) == 0) {
PrintDebug("MOVCR32\n");
- struct cr3_32 * virt_cr3 = (struct cr3_32 *)(dec_instr.first_operand.operand);
+ struct cr3_32 * virt_cr3 = (struct cr3_32 *)(dec_instr.dst_operand.operand);
PrintDebug("CR3 at 0x%x\n", &(info->ctrl_regs.cr3));
return -1;
}
-
info->rip += dec_instr.instr_length;
return 0;