#include <palacios/vmm_debug.h>
#include <palacios/vmm_msr.h>
#include <palacios/vmm_decoder.h>
-#include <palacios/vmm_profiler.h>
+#include <palacios/vmm_telemetry.h>
#include <palacios/vmm_mem.h>
#include <palacios/vmm_hypercall.h>
+#include <palacios/vmm_dev_mgr.h>
+#include <palacios/vmm_cpuid.h>
+#ifdef CONFIG_SYMBIOTIC
+#include <palacios/vmm_sym_iface.h>
+#ifdef CONFIG_SYMBIOTIC_SWAP
+#include <palacios/vmm_sym_swap.h>
+#endif
+
+#endif
#include <devices/generic.h>
#include <devices/ide.h>
#include <devices/ram_hd.h>
#include <devices/net_hd.h>
+#include <devices/telnet_cons.h>
+#include <devices/pci_passthrough.h>
+
+
+
#include <palacios/vmm_host_events.h>
-#define USE_GENERIC 1
#include <palacios/vmm_socket.h>
-
+#ifdef CONFIG_PASSTHROUGH_VIDEO
static int passthrough_mem_write(addr_t guest_addr, void * src, uint_t length, void * priv_data) {
return length;
return length;
}
-
+#endif
int v3_pre_config_guest(struct guest_info * info, struct v3_vm_config * config_ptr) {
- extern v3_cpu_arch_t v3_cpu_type;
+ extern v3_cpu_arch_t v3_cpu_types[];
// Amount of ram the Guest will have, rounded to a 4K page boundary
info->mem_size = config_ptr->mem_size & ~(addr_t)0xfff;
+ info->cpu_id = config_ptr->guest_cpu;
- // Initialize the subsystem data strutures
- v3_init_time(info);
+ /*
+ * Initialize the subsystem data strutures
+ */
+#ifdef CONFIG_TELEMETRY
+ // This should go first, because other subsystems will depend on the guest_info flag
+ if (config_ptr->enable_telemetry) {
+ info->enable_telemetry = 1;
+ v3_init_telemetry(info);
+ } else {
+ info->enable_telemetry = 0;
+ }
+#endif
+
+ v3_init_hypercall_map(info);
v3_init_io_map(info);
v3_init_msr_map(info);
- v3_init_interrupt_state(info);
- v3_init_exception_state(info);
- v3_init_dev_mgr(info);
+ v3_init_cpuid_map(info);
v3_init_host_events(info);
-
- v3_init_decoder(info);
-
- v3_init_hypercall_map(info);
-
-
// Initialize the memory map
v3_init_shadow_map(info);
- if ((v3_cpu_type == V3_SVM_REV3_CPU) &&
+ if ((v3_cpu_types[info->cpu_id] == V3_SVM_REV3_CPU) &&
(config_ptr->enable_nested_paging == 1)) {
PrintDebug("Guest Page Mode: NESTED_PAGING\n");
info->shdw_pg_mode = NESTED_PAGING;
info->shdw_pg_mode = SHADOW_PAGING;
}
- if (config_ptr->enable_profiling) {
- info->enable_profiler = 1;
- v3_init_profiler(info);
- } else {
- info->enable_profiler = 0;
+#ifdef CONFIG_SYMBIOTIC
+ v3_init_sym_iface(info);
+#endif
+
+ v3_init_time(info);
+ v3_init_interrupt_state(info);
+ v3_init_exception_state(info);
+ v3_init_dev_mgr(info);
+ v3_init_decoder(info);
+
+#ifdef CONFIG_SYMBIOTIC_SWAP
+ PrintDebug("initializing symbiotic swap\n");
+ v3_init_sym_swap(info);
+#endif
+
+
+ if (config_ptr->schedule_freq == 0) {
+ // set the schedule frequency to 100 HZ
+ config_ptr->schedule_freq = 100;
}
+ PrintDebug("CPU_KHZ = %d, schedule_freq=%p\n", V3_CPU_KHZ(), (void *)config_ptr->schedule_freq);
+
+ info->yield_cycle_period = (V3_CPU_KHZ() * 1000) / config_ptr->schedule_freq;
// Initial CPU operating mode
info->cpu_mode = REAL;
return -1;
}
+ // v3_print_io_map(info);
+ v3_print_msr_map(info);
+
info->run_state = VM_STOPPED;
info->vm_regs.rdi = 0;
* We need to make sure the memory map extends to cover it
*/
static int setup_memory_map(struct guest_info * info, struct v3_vm_config * config_ptr) {
+
+#ifdef CONFIG_PASSTHROUGH_VIDEO
PrintDebug("Setting up memory map (memory size=%dMB)\n", (uint_t)(info->mem_size / (1024 * 1024)));
// VGA frame buffer
}
} else {
v3_hook_write_mem(info, 0xa0000, 0xc0000, 0xa0000, passthrough_mem_write, NULL);
- }
+ }
+#endif
#define VGABIOS_START 0x000c0000
#define ROMBIOS_START 0x000f0000
/* layout vgabios */
{
+ extern uint8_t v3_vgabios_start[];
+ extern uint8_t v3_vgabios_end[];
+
addr_t vgabios_dst = v3_get_shadow_addr(&(info->mem_map.base_region), VGABIOS_START);
- memcpy(V3_VAddr((void *)vgabios_dst), config_ptr->vgabios, config_ptr->vgabios_size);
+ memcpy(V3_VAddr((void *)vgabios_dst), v3_vgabios_start, v3_vgabios_end - v3_vgabios_start);
}
/* layout rombios */
{
+ extern uint8_t v3_rombios_start[];
+ extern uint8_t v3_rombios_end[];
+
addr_t rombios_dst = v3_get_shadow_addr(&(info->mem_map.base_region), ROMBIOS_START);
- memcpy(V3_VAddr((void *)rombios_dst), config_ptr->rombios, config_ptr->rombios_size);
+ memcpy(V3_VAddr((void *)rombios_dst), v3_rombios_start, v3_rombios_end - v3_rombios_start);
}
-#ifdef CRAY_XT
+#ifdef CONFIG_CRAY_XT
{
#define SEASTAR_START 0xffe00000
#define SEASTAR_END 0xffffffff
return -1;
}
}
-#endif
+#endif
- print_shadow_map(info);
+ v3_print_mem_map(info);
return 0;
}
static int setup_devices(struct guest_info * info, struct v3_vm_config * config_ptr) {
-
v3_create_device(info, "8259A", NULL);
v3_create_device(info, "KEYBOARD", NULL);
v3_create_device(info, "8254_PIT", NULL);
v3_create_device(info, "OS_DEBUG", NULL);
v3_create_device(info, "LAPIC", NULL);
v3_create_device(info, "IOAPIC", "LAPIC");
- v3_create_device(info, "PARANET", NULL);
+ v3_create_device(info, "VMNET", NULL);
- int use_generic = USE_GENERIC;
+ v3_create_device(info, "CGA_VIDEO", (void *)1);
+ {
+ struct telnet_cons_cfg cons_cfg = {"CGA_VIDEO", 19997};
+ v3_create_device(info, "TELNET_CONSOLE", &cons_cfg);
+ }
if (config_ptr->enable_pci == 1) {
- struct ide_cfg ide_config = {"PCI", "PIIX3"};
+ struct ide_cfg ide_config = {"PCI", "PIIX3"};
+ struct pci_passthrough_cfg pci_qemu_pt_cfg = {"PCI", "E1000", 0x8086, 0x100e};
+ struct pci_passthrough_cfg pci_hw_pt_cfg = {"PCI", "E1000", 0x8086, 0x107c};
v3_create_device(info, "PCI", NULL);
v3_create_device(info, "i440FX", "PCI");
v3_create_device(info, "PIIX3", "PCI");
- v3_create_device(info, "IDE", &ide_config);
- } else {
- v3_create_device(info, "IDE", NULL);
- }
+ v3_create_device(info, "LNX_VIRTIO_SYM", "PCI");
+ v3_create_device(info, "LNX_VIRTIO_BLK", "PCI");
+ v3_create_device(info, "LNX_VIRTIO_BALLOON", "PCI");
+ v3_create_device(info, "SYM_SWAP", "LNX_VIRTIO_BLK");
+ v3_create_device(info, "IDE", &ide_config);
+
+ v3_create_device(info, "PCI_PASSTHROUGH", &pci_qemu_pt_cfg);
+ v3_create_device(info, "PCI_PASSTHROUGH", &pci_hw_pt_cfg);
+ } else {
+ v3_create_device(info, "IDE", NULL);
+ }
if (config_ptr->pri_disk_type != NONE) {
config_ptr->pri_disk_info.net.disk_name};
PrintDebug("Creating NET CD\n");
- v3_create_device(info, "NET-CD", &cfg);
+ v3_create_device(info, "NET-CD", &cfg);
}
} else if (config_ptr->pri_disk_type == HARDDRIVE) {
if (config_ptr->pri_disk_con == RAM) {
- if (use_generic) {
+#ifdef CONFIG_GENERIC
configure_generic(info, config_ptr);
- }
+#endif
// This should go last because it requires information about the Harddrives
v3_create_device(info, "NVRAM", "IDE");
-
+#ifdef CONFIG_GENERIC
static int configure_generic(struct guest_info * info, struct v3_vm_config * config_ptr) {
PrintDebug("Creating Generic Device\n");
v3_create_device(info, "GENERIC", NULL);
#endif
-#if 1
+#ifdef CONFIG_PASTHROUGH_VIDEO
// Monitor graphics card operations
v3_generic_add_port_range(generic, 0xc100, 0xc1ff, GENERIC_PRINT_AND_PASSTHROUGH);
#endif
-
-
// v3_generic_add_port_range(generic, 0x378, 0x400, GENERIC_PRINT_AND_IGNORE);
-
return 0;
}
+#endif