* and the University of New Mexico. You can find out more at
* http://www.v3vee.org
*
+ * Copyright (c) 2009, Jack Lange <jarusl@cs.northwestern.edu>
* Copyright (c) 2009, Lei Xia <lxia@northwestern.edu>
* Copyright (c) 2009, Chang Seok Bae <jhuell@gmail.com>
- * Copyright (c) 2009, Jack Lange <jarusl@cs.northwestern.edu>
* Copyright (c) 2009, The V3VEE Project <http://www.v3vee.org>
* All rights reserved.
*
- * Author: Lei Xia <lxia@northwestern.edu>
+ * Author: Jack Lange <jarusl@cs.northwestern.edu>
+ * Lei Xia <lxia@northwestern.edu>
* Chang Seok Bae <jhuell@gmail.com>
- * Jack Lange <jarusl@cs.northwestern.edu>
*
* This is free software. You are permitted to use,
* redistribute, and modify it as specified in the file "V3VEE_LICENSE".
#include <palacios/vmm_io.h>
#include <palacios/vmm_intr.h>
#include <palacios/vmm_rbtree.h>
+#include <palacios/vmm_dev_mgr.h>
#include <devices/pci.h>
#include <devices/pci_types.h>
-#ifndef DEBUG_PCI
+
+
+#ifndef CONFIG_DEBUG_PCI
#undef PrintDebug
#define PrintDebug(fmt, args...)
#endif
#define CONFIG_ADDR_PORT 0x0cf8
#define CONFIG_DATA_PORT 0x0cfc
+#define PCI_DEV_IO_PORT_BASE 0xc000
#define PCI_BUS_COUNT 1
// Bitmap of the allocated device numbers
uint8_t dev_map[MAX_BUS_DEVICES / 8];
+
+
+ int (*raise_pci_irq)(struct vm_device * dev, struct pci_device * pci_dev);
+ int (*lower_pci_irq)(struct vm_device * dev, struct pci_device * pci_dev);
+ struct vm_device * irq_bridge_dev;
};
// Configuration address register
struct pci_addr_reg addr_reg;
+ // Base IO Port which PCI devices will register with...
+ uint16_t dev_io_base;
+
// Attached Busses
struct pci_bus bus_list[PCI_BUS_COUNT];
};
-#ifdef DEBUG_PCI
+#ifdef CONFIG_DEBUG_PCI
static void pci_dump_state(struct pci_internal * pci_state) {
struct rb_node * node = v3_rb_first(&(pci_state->bus_list[0].devices));
int i, j;
for (i = 0; i < sizeof(bus->dev_map); i++) {
+ PrintDebug("i=%d\n", i);
if (bus->dev_map[i] != 0xff) {
// availability
for (j = 0; j < 8; j++) {
+ PrintDebug("\tj=%d\n", j);
if (!(bus->dev_map[i] & (0x1 << j))) {
- return i * 8 + j;
+ return ((i * 8) + j);
}
}
}
}
static void allocate_dev_num(struct pci_bus * bus, int dev_num) {
- int major = dev_num / 8;
+ int major = (dev_num / 8);
int minor = dev_num % 8;
bus->dev_map[major] |= (0x1 << minor);
parent = *p;
tmp_dev = rb_entry(parent, struct pci_device, dev_tree_node);
- if (dev->dev_num < tmp_dev->dev_num) {
+ if (dev->devfn < tmp_dev->devfn) {
p = &(*p)->rb_left;
- } else if (dev->dev_num > tmp_dev->dev_num) {
+ } else if (dev->devfn > tmp_dev->devfn) {
p = &(*p)->rb_right;
} else {
return tmp_dev;
}
-static struct pci_device * get_device(struct pci_bus * bus, int dev_num) {
+static struct pci_device * get_device(struct pci_bus * bus, uint8_t dev_num, uint8_t fn_num) {
struct rb_node * n = bus->devices.rb_node;
struct pci_device * dev = NULL;
+ uint8_t devfn = ((dev_num & 0x1f) << 3) | (fn_num & 0x7);
while (n) {
dev = rb_entry(n, struct pci_device, dev_tree_node);
- if (dev_num < dev->dev_num) {
+ if (devfn < dev->devfn) {
n = n->rb_left;
- } else if (dev_num > dev->dev_num) {
+ } else if (devfn > dev->devfn) {
n = n->rb_right;
} else {
return dev;
int reg_offset = port & 0x3;
uint8_t * reg_addr = ((uint8_t *)&(pci_state->addr_reg.val)) + reg_offset;
- PrintDebug("Reading PCI Address Port (%x): %x\n", port, pci_state->addr_reg.val);
+ PrintDebug("Reading PCI Address Port (%x): %x len=%d\n", port, pci_state->addr_reg.val, length);
if (length == 4) {
if (reg_offset != 0) {
PrintDebug("Writing PCI Address Port(%x): %x\n", port, pci_state->addr_reg.val);
-
return length;
}
static int data_port_read(ushort_t port, void * dst, uint_t length, struct vm_device * vmdev) {
- struct pci_internal * pci_state = (struct pci_internal *)vmdev->private_data;;
+ struct pci_internal * pci_state = (struct pci_internal *)(vmdev->private_data);
struct pci_device * pci_dev = NULL;
- uint_t reg_num = pci_state->addr_reg.reg_num + (port & 0x3);
+ uint_t reg_num = (pci_state->addr_reg.reg_num << 2) + (port & 0x3);
int i;
+ if (pci_state->addr_reg.bus_num != 0) {
+ int i = 0;
+ for (i = 0; i < length; i++) {
+ *((uint8_t *)dst + i) = 0xff;
+ }
+
+ return length;
+ }
+
PrintDebug("Reading PCI Data register. bus = %d, dev = %d, reg = %d (%x), cfg_reg = %x\n",
pci_state->addr_reg.bus_num,
pci_state->addr_reg.dev_num,
reg_num, reg_num,
pci_state->addr_reg.val);
-
- pci_dev = get_device(&(pci_state->bus_list[0]), pci_state->addr_reg.dev_num);
+ pci_dev = get_device(&(pci_state->bus_list[0]), pci_state->addr_reg.dev_num, pci_state->addr_reg.fn_num);
if (pci_dev == NULL) {
for (i = 0; i < length; i++) {
- *((uint8_t *)dst + i) = 0xff;
+ *(uint8_t *)((uint8_t *)dst + i) = 0xff;
}
return length;
}
+ if (pci_dev->type == PCI_PASSTHROUGH) {
+ if (pci_dev->config_read(reg_num, dst, length, pci_dev->priv_data) == -1) {
+ PrintError("Failed to handle configuration update for passthrough pci_device\n");
+ return -1;
+ }
+
+ return 0;
+ }
+
for (i = 0; i < length; i++) {
- *((uint8_t *)dst + i) = pci_dev->config_space[reg_num + i];
+ *(uint8_t *)((uint8_t *)dst + i) = pci_dev->config_space[reg_num + i];
}
-
+
+ PrintDebug("\tVal=%x, len=%d\n", *(uint32_t *)dst, length);
+
return length;
}
static inline int is_cfg_reg_writable(uchar_t header_type, int reg_num) {
if (header_type == 0x00) {
switch (reg_num) {
- // case (non writable reg list):
-
- default:
- return 1;
+ case 0x00:
+ case 0x01:
+ case 0x02:
+ case 0x03:
+ case 0x08:
+ case 0x09:
+ case 0x0a:
+ case 0x0b:
+ case 0x0e:
+ case 0x3d:
+ return 0;
+
+ default:
+ return 1;
+
+ }
+ } else if (header_type == 0x80) {
+ switch (reg_num) {
+ case 0x00:
+ case 0x01:
+ case 0x02:
+ case 0x03:
+ case 0x08:
+ case 0x09:
+ case 0x0a:
+ case 0x0b:
+ case 0x0e:
+ case 0x3d:
+ return 0;
+
+ default:
+ return 1;
+
}
} else {
// PCI to PCI Bridge = 0x01
}
+static int bar_update(struct guest_info * info, struct pci_device * pci, int bar_num, uint32_t new_val) {
+ struct v3_pci_bar * bar = &(pci->bar[bar_num]);
+
+ PrintDebug("Updating BAR Register (Dev=%s) (bar=%d) (old_val=0x%x) (new_val=0x%x)\n",
+ pci->name, bar_num, bar->val, new_val);
+
+ switch (bar->type) {
+ case PCI_BAR_IO: {
+ int i = 0;
+
+ PrintDebug("\tRehooking %d IO ports from base 0x%x to 0x%x for %d ports\n",
+ bar->num_ports, PCI_IO_BASE(bar->val), PCI_IO_BASE(new_val),
+ bar->num_ports);
+
+ // only do this if pci device is enabled....
+ if (!(pci->config_header.status & 0x1)) {
+ PrintError("PCI Device IO space not enabled\n");
+ }
+
+ for (i = 0; i < bar->num_ports; i++) {
+
+ PrintDebug("Rehooking PCI IO port (old port=%u) (new port=%u)\n",
+ PCI_IO_BASE(bar->val) + i, PCI_IO_BASE(new_val) + i);
+
+ v3_unhook_io_port(info, PCI_IO_BASE(bar->val) + i);
+
+ if (v3_hook_io_port(info, PCI_IO_BASE(new_val) + i,
+ bar->io_read, bar->io_write,
+ bar->private_data) == -1) {
+
+ PrintError("Could not hook PCI IO port (old port=%u) (new port=%u)\n",
+ PCI_IO_BASE(bar->val) + i, PCI_IO_BASE(new_val) + i);
+ v3_print_io_map(info);
+ return -1;
+ }
+ }
+
+ bar->val = new_val;
+
+ break;
+ }
+ case PCI_BAR_MEM32: {
+ v3_unhook_mem(info, (addr_t)(bar->val));
+
+ if (bar->mem_read) {
+ v3_hook_full_mem(info, PCI_MEM32_BASE(new_val),
+ PCI_MEM32_BASE(new_val) + (bar->num_pages * PAGE_SIZE_4KB),
+ bar->mem_read, bar->mem_write, pci->priv_data);
+ } else {
+ PrintError("Write hooks not supported for PCI\n");
+ return -1;
+ }
+
+ bar->val = new_val;
+
+ break;
+ }
+ case PCI_BAR_NONE: {
+ PrintDebug("Reprogramming an unsupported BAR register (Dev=%s) (bar=%d) (val=%x)\n",
+ pci->name, bar_num, new_val);
+ break;
+ }
+ default:
+ PrintError("Invalid Bar Reg updated (bar=%d)\n", bar_num);
+ return -1;
+ }
+
+ return 0;
+}
+
+
static int data_port_write(ushort_t port, void * src, uint_t length, struct vm_device * vmdev) {
struct pci_internal * pci_state = (struct pci_internal *)vmdev->private_data;
struct pci_device * pci_dev = NULL;
- uint_t reg_num = pci_state->addr_reg.reg_num + (port & 0x3);
+ uint_t reg_num = (pci_state->addr_reg.reg_num << 2) + (port & 0x3);
int i;
- PrintDebug("Writing PCI Data register. bus = %d, dev = %d, reg = %d (%x) addr_reg = %x\n",
+
+ if (pci_state->addr_reg.bus_num != 0) {
+ return length;
+ }
+
+ PrintDebug("Writing PCI Data register. bus = %d, dev = %d, fn = %d, reg = %d (0x%x) addr_reg = 0x%x (val=0x%x, len=%d)\n",
pci_state->addr_reg.bus_num,
pci_state->addr_reg.dev_num,
+ pci_state->addr_reg.fn_num,
reg_num, reg_num,
- pci_state->addr_reg.val);
+ pci_state->addr_reg.val,
+ *(uint32_t *)src, length);
- pci_dev = get_device(&(pci_state->bus_list[0]), pci_state->addr_reg.dev_num);
+ pci_dev = get_device(&(pci_state->bus_list[0]), pci_state->addr_reg.dev_num, pci_state->addr_reg.fn_num);
if (pci_dev == NULL) {
PrintError("Writing configuration space for non-present device (dev_num=%d)\n",
return -1;
}
+ if (pci_dev->type == PCI_PASSTHROUGH) {
+ if (pci_dev->config_write(reg_num, src, length, pci_dev->priv_data) == -1) {
+ PrintError("Failed to handle configuration update for passthrough pci_device\n");
+ return -1;
+ }
+
+ return 0;
+ }
+
for (i = 0; i < length; i++) {
uint_t cur_reg = reg_num + i;
+ int writable = is_cfg_reg_writable(pci_dev->config_header.header_type, cur_reg);
- if (is_cfg_reg_writable(pci_dev->config_header.header_type, cur_reg)) {
- pci_dev->config_space[cur_reg] = *((uint8_t *)src + i);
+ if (writable == -1) {
+ PrintError("Invalid PCI configuration space\n");
+ return -1;
+ }
+
+ if (writable) {
+ pci_dev->config_space[cur_reg] = *(uint8_t *)((uint8_t *)src + i);
if ((cur_reg >= 0x10) && (cur_reg < 0x28)) {
- // BAR Reg
- int bar_reg = (cur_reg & ~0x3) - 0x10;
+ // BAR Register Update
+ int bar_reg = ((cur_reg & ~0x3) - 0x10) / 4;
+
+ pci_dev->bar_update_flag = 1;
+ pci_dev->bar[bar_reg].updated = 1;
+
+ // PrintDebug("Updating BAR register %d\n", bar_reg);
- if (pci_dev->bar[bar_reg].bar_update) {
- pci_dev->bar_update_flag = 1;
- pci_dev->bar[bar_reg].updated = 1;
- }
} else if ((cur_reg >= 0x30) && (cur_reg < 0x34)) {
- pci_dev->ext_rom_updated = 1;
- } else if ((cur_reg == 0x04) || (cur_reg == 0x05)) {
- // COMMAND update
+ // Extension ROM update
+
+ pci_dev->ext_rom_update_flag = 1;
+ } else if (cur_reg == 0x04) {
+ // COMMAND update
+ uint8_t command = *((uint8_t *)src + i);
+
+ PrintError("command update for %s old=%x new=%x\n",
+ pci_dev->name,
+ pci_dev->config_space[cur_reg],command);
+
+ pci_dev->config_space[cur_reg] = command;
+
+ if (pci_dev->cmd_update) {
+ pci_dev->cmd_update(pci_dev, (command & 0x01), (command & 0x02));
+ }
+
} else if (cur_reg == 0x0f) {
// BIST update
+ pci_dev->config_header.BIST = 0x00;
}
+ } else {
+ PrintError("PCI Write to read only register %d\n", cur_reg);
}
}
if (pci_dev->config_update) {
- pci_dev->config_update(pci_dev, reg_num, length);
+ pci_dev->config_update(reg_num, src, length, pci_dev->priv_data);
}
// Scan for BAR updated
if (pci_dev->bar[i].updated) {
int bar_offset = 0x10 + 4 * i;
- *(uint32_t *)pci_dev->config_space + bar_offset) &= pci_dev->bar[i].mask;
- if (pci_dev->bar[i].bar_update) {
- pci_dev->bar[i].bar_update(pci_dev, i);
+ if (pci_dev->bar[i].type == PCI_BAR_PASSTHROUGH) {
+ if (pci_dev->bar[i].bar_write(i, (uint32_t *)(pci_dev->config_space + bar_offset), pci_dev->bar[i].private_data) == -1) {
+ PrintError("Error in passthrough bar write operation\n");
+ return -1;
+ }
+ } else {
+
+ *(uint32_t *)(pci_dev->config_space + bar_offset) &= pci_dev->bar[i].mask;
+ // check special flags....
+
+ // bar_update
+ if (bar_update(vmdev->vm, pci_dev, i, *(uint32_t *)(pci_dev->config_space + bar_offset)) == -1) {
+ PrintError("PCI Device %s: Bar update Error Bar=%d\n", pci_dev->name, i);
+ return -1;
+ }
}
+
pci_dev->bar[i].updated = 0;
}
}
-static int pci_deinit_device(struct vm_device * dev) {
+static int pci_free(struct vm_device * dev) {
int i = 0;
for (i = 0; i < 4; i++){
-
-static int init_i440fx(struct vm_device * dev) {
- struct pci_device * pci_dev = v3_pci_register_device(dev, 0, "i440FX", 0,
- NULL, NULL, NULL);
-
- if (!pci_dev) {
- return -1;
- }
-
- pci_dev->config_header.vendor_id = 0x8086;
- pci_dev->config_header.device_id = 0x1237;
- pci_dev->config_header.revision = 0x0002;
- pci_dev->config_header.subclass = 0x00; // SubClass: host2pci
- pci_dev->config_header.class = 0x06; // Class: PCI bridge
- pci_dev->config_header.header_type = 0x00;
-
- pci_dev->bus_num = 0;
-
- return 0;
-}
-
-
-
static void init_pci_busses(struct pci_internal * pci_state) {
int i;
-static int pci_init_device(struct vm_device * dev) {
- struct pci_internal * pci_state = (struct pci_internal *)dev->private_data;;
+
+static struct v3_device_ops dev_ops = {
+ .free = pci_free,
+ .reset = pci_reset_device,
+ .start = pci_start_device,
+ .stop = pci_stop_device,
+};
+
+
+
+
+static int pci_init(struct guest_info * vm, v3_cfg_tree_t * cfg) {
+ struct pci_internal * pci_state = V3_Malloc(sizeof(struct pci_internal));
int i = 0;
+ char * name = v3_cfg_val(cfg, "name");
+
+ PrintDebug("PCI internal at %p\n",(void *)pci_state);
+
+ struct vm_device * dev = v3_allocate_device(name, &dev_ops, pci_state);
- PrintDebug("pci: init_device\n");
+ if (v3_attach_device(vm, dev) == -1) {
+ PrintError("Could not attach device %s\n", name);
+ return -1;
+ }
- // JRL: Fix this....
- // dev->vm->pci = dev; //should be in vmm_config.c
pci_state->addr_reg.val = 0;
+ pci_state->dev_io_base = PCI_DEV_IO_PORT_BASE;
init_pci_busses(pci_state);
-
- if (init_i440fx(dev) == -1) {
- PrintError("Could not intialize i440fx\n");
- return -1;
- }
-
- PrintDebug("Sizeof config header=%d\n", sizeof(struct pci_config_header));
+
+ PrintDebug("Sizeof config header=%d\n", (int)sizeof(struct pci_config_header));
for (i = 0; i < 4; i++) {
v3_dev_hook_io(dev, CONFIG_ADDR_PORT + i, &addr_port_read, &addr_port_write);
}
-static struct vm_device_ops dev_ops = {
- .init = pci_init_device,
- .deinit = pci_deinit_device,
- .reset = pci_reset_device,
- .start = pci_start_device,
- .stop = pci_stop_device,
-};
+device_register("PCI", pci_init)
-struct vm_device * v3_create_pci() {
- struct pci_internal * pci_state = V3_Malloc(sizeof(struct pci_internal));
-
- PrintDebug("PCI internal at %p\n",(void *)pci_state);
-
- struct vm_device * device = v3_create_device("PCI", &dev_ops, pci_state);
-
- return device;
-}
-
-
-
-static inline int init_bars(struct pci_device * pci_dev) {
+static inline int init_bars(struct guest_info * info, struct pci_device * pci_dev) {
int i = 0;
for (i = 0; i < 6; i++) {
- int bar_offset = 0x10 + 4 * i;
+ int bar_offset = 0x10 + (4 * i);
if (pci_dev->bar[i].type == PCI_BAR_IO) {
- *(uint32_t *)(pci_dev->config_space + bar_offset) = 0x00000001;
+ int j = 0;
+ pci_dev->bar[i].mask = (~((pci_dev->bar[i].num_ports) - 1)) | 0x01;
+
+ if (pci_dev->bar[i].default_base_port != 0xffff) {
+ pci_dev->bar[i].val = pci_dev->bar[i].default_base_port & pci_dev->bar[i].mask;
+ } else {
+ pci_dev->bar[i].val = 0;
+ }
+
+ pci_dev->bar[i].val |= 0x00000001;
+
+ for (j = 0; j < pci_dev->bar[i].num_ports; j++) {
+ // hook IO
+ if (pci_dev->bar[i].default_base_port != 0xffff) {
+ if (v3_hook_io_port(info, pci_dev->bar[i].default_base_port + j,
+ pci_dev->bar[i].io_read, pci_dev->bar[i].io_write,
+ pci_dev->bar[i].private_data) == -1) {
+ PrintError("Could not hook default io port %x\n", pci_dev->bar[i].default_base_port + j);
+ return -1;
+ }
+ }
+ }
+
+ *(uint32_t *)(pci_dev->config_space + bar_offset) = pci_dev->bar[i].val;
+
} else if (pci_dev->bar[i].type == PCI_BAR_MEM32) {
- pci_dev->bar[i].mask = (pci_dev->bar[i].num_pages << 12) - 1;
+ pci_dev->bar[i].mask = ~((pci_dev->bar[i].num_pages << 12) - 1);
pci_dev->bar[i].mask |= 0xf; // preserve the configuration flags
-
- *(uint32_t *)(pci_dev->config_space + bar_offset) = 0x00000008;
-
- if (pci_dev->bar[i].mem_hook) {
- // clear the prefetchable flag...
- *(uint8_t *)(pci_dev->config_space + bar_offset) &= ~0x00000008;
+
+ if (pci_dev->bar[i].default_base_addr != 0xffffffff) {
+ pci_dev->bar[i].val = pci_dev->bar[i].default_base_addr & pci_dev->bar[i].mask;
+ } else {
+ pci_dev->bar[i].val = 0;
+ }
+
+ // hook memory
+ if (pci_dev->bar[i].mem_read) {
+ // full hook
+ v3_hook_full_mem(info, pci_dev->bar[i].default_base_addr,
+ pci_dev->bar[i].default_base_addr + (pci_dev->bar[i].num_pages * PAGE_SIZE_4KB),
+ pci_dev->bar[i].mem_read, pci_dev->bar[i].mem_write, pci_dev->priv_data);
+ } else if (pci_dev->bar[i].mem_write) {
+ // write hook
+ PrintError("Write hooks not supported for PCI devices\n");
+ return -1;
+ /*
+ v3_hook_write_mem(pci_dev->vm_dev->vm, pci_dev->bar[i].default_base_addr,
+ pci_dev->bar[i].default_base_addr + (pci_dev->bar[i].num_pages * PAGE_SIZE_4KB),
+ pci_dev->bar[i].mem_write, pci_dev->vm_dev);
+ */
+ } else {
+ // set the prefetchable flag...
+ pci_dev->bar[i].val |= 0x00000008;
}
- } else if (pci_dev->bar[i].type == PCI_BAR_MEM16) {
+
+
+ *(uint32_t *)(pci_dev->config_space + bar_offset) = pci_dev->bar[i].val;
+
+ } else if (pci_dev->bar[i].type == PCI_BAR_MEM24) {
PrintError("16 Bit memory ranges not supported (reg: %d)\n", i);
+ return -1;
} else if (pci_dev->bar[i].type == PCI_BAR_NONE) {
- *(uint32_t *)(pci_dev->config_space + bar_offset) = 0x00000000;
+ pci_dev->bar[i].val = 0x00000000;
+ pci_dev->bar[i].mask = 0x00000000; // This ensures that all updates will be dropped
+ *(uint32_t *)(pci_dev->config_space + bar_offset) = pci_dev->bar[i].val;
+ } else if (pci_dev->bar[i].type == PCI_BAR_PASSTHROUGH) {
+
+ // Call the bar init function to get the local cached value
+ pci_dev->bar[i].bar_init(i, &(pci_dev->bar[i].val), pci_dev->bar[i].private_data);
+
} else {
PrintError("Invalid BAR type for bar #%d\n", i);
return -1;
}
-
-
}
+
+ return 0;
}
+int v3_pci_set_irq_bridge(struct vm_device * pci_bus, int bus_num,
+ int (*raise_pci_irq)(struct vm_device * dev, struct pci_device * pci_dev),
+ int (*lower_pci_irq)(struct vm_device * dev, struct pci_device * pci_dev),
+ struct vm_device * bridge_dev) {
+ struct pci_internal * pci_state = (struct pci_internal *)pci_bus->private_data;
+
+
+ pci_state->bus_list[bus_num].raise_pci_irq = raise_pci_irq;
+ pci_state->bus_list[bus_num].lower_pci_irq = lower_pci_irq;
+ pci_state->bus_list[bus_num].irq_bridge_dev = bridge_dev;
+
+ return 0;
+}
+
+int v3_pci_raise_irq(struct vm_device * pci_bus, int bus_num, struct pci_device * dev) {
+ struct pci_internal * pci_state = (struct pci_internal *)pci_bus->private_data;
+ struct pci_bus * bus = &(pci_state->bus_list[bus_num]);
+
+ return bus->raise_pci_irq(bus->irq_bridge_dev, dev);
+}
+
+int v3_pci_lower_irq(struct vm_device * pci_bus, int bus_num, struct pci_device * dev) {
+ struct pci_internal * pci_state = (struct pci_internal *)pci_bus->private_data;
+ struct pci_bus * bus = &(pci_state->bus_list[bus_num]);
+
+ return bus->lower_pci_irq(bus->irq_bridge_dev, dev);
+}
// if dev_num == -1, auto assign
struct pci_device * v3_pci_register_device(struct vm_device * pci,
- uint_t bus_num,
- const char * name,
+ pci_device_type_t dev_type,
+ int bus_num,
int dev_num,
+ int fn_num,
+ const char * name,
struct v3_pci_bar * bars,
- int (*config_update)(struct pci_device * pci_dev, uint_t reg_num, int length),
- int (*cmd_update)(struct pci_dev *pci_dev, uchar_t io_enabled, uchar_t mem_enabled),
- int (*bar_update)(struct pci_device * pci_dev, uint_t bar),
- void * private_data) {
+ int (*config_update)(uint_t reg_num, void * src, uint_t length, void * priv_data),
+ int (*cmd_update)(struct pci_device *pci_dev, uchar_t io_enabled, uchar_t mem_enabled),
+ int (*ext_rom_update)(struct pci_device * pci_dev),
+ void * priv_data) {
struct pci_internal * pci_state = (struct pci_internal *)pci->private_data;
struct pci_bus * bus = &(pci_state->bus_list[bus_num]);
return NULL;
}
- if (dev_num == -1) {
+ if (dev_num == PCI_AUTO_DEV_NUM) {
+ PrintDebug("Searching for free device number\n");
if ((dev_num = get_free_dev_num(bus)) == -1) {
PrintError("No more available PCI slots on bus %d\n", bus->bus_num);
return NULL;
}
}
- if (get_device(bus, dev_num) != NULL) {
+ PrintDebug("Checking for PCI Device\n");
+
+ if (get_device(bus, dev_num, fn_num) != NULL) {
PrintError("PCI Device already registered at slot %d on bus %d\n",
dev_num, bus->bus_num);
return NULL;
pci_dev = (struct pci_device *)V3_Malloc(sizeof(struct pci_device));
if (pci_dev == NULL) {
+ PrintError("Could not allocate pci device\n");
return NULL;
}
memset(pci_dev, 0, sizeof(struct pci_device));
-
+
+
+ pci_dev->type = dev_type;
+ switch (pci_dev->type) {
+ case PCI_STD_DEVICE:
+ pci_dev->config_header.header_type = 0x00;
+ break;
+ case PCI_MULTIFUNCTION:
+ pci_dev->config_header.header_type = 0x80;
+ break;
+ default:
+ PrintError("Unhandled PCI Device Type: %d\n", dev_type);
+ return NULL;
+ }
+
+
+
pci_dev->bus_num = bus_num;
pci_dev->dev_num = dev_num;
+ pci_dev->fn_num = fn_num;
strncpy(pci_dev->name, name, sizeof(pci_dev->name));
- pci_dev->vm_dev = pci;
+ pci_dev->priv_data = priv_data;
// register update callbacks
pci_dev->config_update = config_update;
- pci_dev->bar_update = bar_update;
+ pci_dev->cmd_update = cmd_update;
+ pci_dev->ext_rom_update = ext_rom_update;
- pci_dev->priv_data = private_data;
-
//copy bars
- for (i = 0; i < 6; i ++){
- pci_dev->bar[i].type = bars[i].type;
- pci_dev->bar[i].num_resources = bars[i].num_resources;
- pci_dev->bar[i].bar_update = bars[i].bar_update;
+ for (i = 0; i < 6; i ++) {
+ pci_dev->bar[i].type = bars[i].type;
+ pci_dev->bar[i].private_data = bars[i].private_data;
+
+ if (pci_dev->bar[i].type == PCI_BAR_IO) {
+ pci_dev->bar[i].num_ports = bars[i].num_ports;
+
+ // This is a horrible HACK becaues the BIOS is supposed to set the PCI base ports
+ // And if the BIOS doesn't, Linux just happily overlaps device port assignments
+ if (bars[i].default_base_port != (uint16_t)-1) {
+ pci_dev->bar[i].default_base_port = bars[i].default_base_port;
+ } else {
+ pci_dev->bar[i].default_base_port = pci_state->dev_io_base;
+ pci_state->dev_io_base += ( 0x100 * ((bars[i].num_ports / 0x100) + 1) );
+ }
+
+ pci_dev->bar[i].io_read = bars[i].io_read;
+ pci_dev->bar[i].io_write = bars[i].io_write;
+ } else if (pci_dev->bar[i].type == PCI_BAR_MEM32) {
+ pci_dev->bar[i].num_pages = bars[i].num_pages;
+ pci_dev->bar[i].default_base_addr = bars[i].default_base_addr;
+ pci_dev->bar[i].mem_read = bars[i].mem_read;
+ pci_dev->bar[i].mem_write = bars[i].mem_write;
+ } else if (pci_dev->bar[i].type == PCI_BAR_PASSTHROUGH) {
+ pci_dev->bar[i].bar_init = bars[i].bar_init;
+ pci_dev->bar[i].bar_write = bars[i].bar_write;
+ } else {
+ pci_dev->bar[i].num_pages = 0;
+ pci_dev->bar[i].default_base_addr = 0;
+ pci_dev->bar[i].mem_read = NULL;
+ pci_dev->bar[i].mem_write = NULL;
+ }
}
- if (init_bars(pci_dev) == -1) {
+ if (init_bars(pci->vm, pci_dev) == -1) {
PrintError("could not initialize bar registers\n");
return NULL;
}
- pci_dev->cmd_update = cmd_update;
- pci_dev->ext_rom_update = ext_rom_update;
-
// add the device
add_device_to_bus(bus, pci_dev);
-
-#ifdef DEBUG_PCI
+#ifdef CONFIG_DEBUG_PCI
pci_dump_state(pci_state);
#endif
+// if dev_num == -1, auto assign
+struct pci_device * v3_pci_register_passthrough_device(struct vm_device * pci,
+ int bus_num,
+ int dev_num,
+ int fn_num,
+ const char * name,
+ int (*config_write)(uint_t reg_num, void * src, uint_t length, void * private_data),
+ int (*config_read)(uint_t reg_num, void * dst, uint_t length, void * private_data),
+ void * private_data) {
+
+ struct pci_internal * pci_state = (struct pci_internal *)pci->private_data;
+ struct pci_bus * bus = &(pci_state->bus_list[bus_num]);
+ struct pci_device * pci_dev = NULL;
+
+ if (dev_num > MAX_BUS_DEVICES) {
+ PrintError("Requested Invalid device number (%d)\n", dev_num);
+ return NULL;
+ }
+
+ if (dev_num == PCI_AUTO_DEV_NUM) {
+ PrintDebug("Searching for free device number\n");
+ if ((dev_num = get_free_dev_num(bus)) == -1) {
+ PrintError("No more available PCI slots on bus %d\n", bus->bus_num);
+ return NULL;
+ }
+ }
+
+ PrintDebug("Checking for PCI Device\n");
+
+ if (get_device(bus, dev_num, fn_num) != NULL) {
+ PrintError("PCI Device already registered at slot %d on bus %d\n",
+ dev_num, bus->bus_num);
+ return NULL;
+ }
+
+
+ pci_dev = (struct pci_device *)V3_Malloc(sizeof(struct pci_device));
+
+ if (pci_dev == NULL) {
+ PrintError("Could not allocate pci device\n");
+ return NULL;
+ }
+
+ memset(pci_dev, 0, sizeof(struct pci_device));
+
+ pci_dev->bus_num = bus_num;
+ pci_dev->dev_num = dev_num;
+ pci_dev->fn_num = fn_num;
+
+ strncpy(pci_dev->name, name, sizeof(pci_dev->name));
+ pci_dev->priv_data = private_data;
+
+ // register update callbacks
+ pci_dev->config_write = config_write;
+ pci_dev->config_read = config_read;
+
+ // add the device
+ add_device_to_bus(bus, pci_dev);
+
+#ifdef CONFIG_DEBUG_PCI
+ pci_dump_state(pci_state);
+#endif
+
+ return pci_dev;
+}