-#ifndef CONFIG_DEBUG_VIRTIO_BLK
+#ifndef V3_CONFIG_DEBUG_VIRTIO_BLK
#undef PrintDebug
#define PrintDebug(fmt, args...)
#endif
uint16_t cylinders;
uint8_t heads;
uint8_t sectors;
+ /*
+ uint32_t blk_size;
+ uint8_t phys_block_exp;
+ uint8_t alignment_offset;
+ uint16_t min_io_size;
+ uint32_t opt_io_size;
+ */
} __attribute__((packed));
};
-static int virtio_free(struct vm_device * dev) {
- return -1;
-}
+
static int blk_reset(struct virtio_blk_state * virtio) {
static int handle_read_op(struct virtio_blk_state * blk_state, uint8_t * buf, uint64_t * sector, uint64_t len) {
int ret = -1;
- PrintDebug("Reading Disk\n");
+ PrintDebug(info->vm_info, info, "Reading Disk\n");
ret = blk_state->ops->read(buf, (*sector) * SECTOR_SIZE, len, (void *)(blk_state->backend_data));
*sector += (len / SECTOR_SIZE);
static int handle_write_op(struct virtio_blk_state * blk_state, uint8_t * buf, uint64_t * sector, uint64_t len) {
int ret = -1;
- PrintDebug("Writing Disk\n");
+ PrintDebug(info->vm_info, info, "Writing Disk\n");
ret = blk_state->ops->write(buf, (*sector) * SECTOR_SIZE, len, (void *)(blk_state->backend_data));
*sector += (len / SECTOR_SIZE);
struct vring_desc * buf_desc, uint8_t * status) {
uint8_t * buf = NULL;
- PrintDebug("Handling Block op\n");
+ PrintDebug(core->vm_info, core, "Handling Block op\n");
if (v3_gpa_to_hva(core, buf_desc->addr_gpa, (addr_t *)&(buf)) == -1) {
- PrintError("Could not translate buffer address\n");
+ PrintError(core->vm_info, core, "Could not translate buffer address\n");
return -1;
}
- PrintDebug("Sector=%p Length=%d\n", (void *)(addr_t)(hdr->sector), buf_desc->length);
+ PrintDebug(core->vm_info, core, "Sector=%p Length=%d\n", (void *)(addr_t)(hdr->sector), buf_desc->length);
if (hdr->type == BLK_IN_REQ) {
if (handle_read_op(blk_state, buf, &(hdr->sector), buf_desc->length) == -1) {
*status = BLK_STATUS_OK;
}
} else if (hdr->type == BLK_SCSI_CMD) {
- PrintError("VIRTIO: SCSI Command Not supported!!!\n");
+ PrintError(core->vm_info, core, "VIRTIO: SCSI Command Not supported!!!\n");
*status = BLK_STATUS_NOT_SUPPORTED;
return -1;
}
- PrintDebug("Returning Status: %d\n", *status);
+ PrintDebug(core->vm_info, core, "Returning Status: %d\n", *status);
return 0;
}
static int handle_kick(struct guest_info * core, struct virtio_blk_state * blk_state) {
struct virtio_queue * q = &(blk_state->queue);
- PrintDebug("VIRTIO KICK: cur_index=%d (mod=%d), avail_index=%d\n",
+ PrintDebug(core->vm_info, core, "VIRTIO KICK: cur_index=%d (mod=%d), avail_index=%d\n",
q->cur_avail_idx, q->cur_avail_idx % QUEUE_SIZE, q->avail->index);
while (q->cur_avail_idx != q->avail->index) {
uint8_t status = BLK_STATUS_OK;
uint32_t req_len = 0;
- PrintDebug("Descriptor Count=%d, index=%d\n", desc_cnt, q->cur_avail_idx % QUEUE_SIZE);
+ PrintDebug(core->vm_info, core, "Descriptor Count=%d, index=%d\n", desc_cnt, q->cur_avail_idx % QUEUE_SIZE);
if (desc_cnt < 3) {
- PrintError("Block operations must include at least 3 descriptors\n");
+ PrintError(core->vm_info, core, "Block operations must include at least 3 descriptors\n");
return -1;
}
hdr_desc = &(q->desc[desc_idx]);
- PrintDebug("Header Descriptor (ptr=%p) gpa=%p, len=%d, flags=%x, next=%d\n", hdr_desc,
+ PrintDebug(core->vm_info, core, "Header Descriptor (ptr=%p) gpa=%p, len=%d, flags=%x, next=%d\n", hdr_desc,
(void *)(hdr_desc->addr_gpa), hdr_desc->length, hdr_desc->flags, hdr_desc->next);
if (v3_gpa_to_hva(core, hdr_desc->addr_gpa, &(hdr_addr)) == -1) {
- PrintError("Could not translate block header address\n");
+ PrintError(core->vm_info, core, "Could not translate block header address\n");
return -1;
}
// We copy the block op header out because we are going to modify its contents
memcpy(&hdr, (void *)hdr_addr, sizeof(struct blk_op_hdr));
- PrintDebug("Blk Op Hdr (ptr=%p) type=%d, sector=%p\n", (void *)hdr_addr, hdr.type, (void *)hdr.sector);
+ PrintDebug(core->vm_info, core, "Blk Op Hdr (ptr=%p) type=%d, sector=%p\n", (void *)hdr_addr, hdr.type, (void *)hdr.sector);
desc_idx = hdr_desc->next;
buf_desc = &(q->desc[desc_idx]);
- PrintDebug("Buffer Descriptor (ptr=%p) gpa=%p, len=%d, flags=%x, next=%d\n", buf_desc,
+ PrintDebug(core->vm_info, core, "Buffer Descriptor (ptr=%p) gpa=%p, len=%d, flags=%x, next=%d\n", buf_desc,
(void *)(buf_desc->addr_gpa), buf_desc->length, buf_desc->flags, buf_desc->next);
if (handle_block_op(core, blk_state, &hdr, buf_desc, &tmp_status) == -1) {
- PrintError("Error handling block operation\n");
+ PrintError(core->vm_info, core, "Error handling block operation\n");
return -1;
}
status_desc = &(q->desc[desc_idx]);
- PrintDebug("Status Descriptor (ptr=%p) gpa=%p, len=%d, flags=%x, next=%d\n", status_desc,
+ PrintDebug(core->vm_info, core, "Status Descriptor (ptr=%p) gpa=%p, len=%d, flags=%x, next=%d\n", status_desc,
(void *)(status_desc->addr_gpa), status_desc->length, status_desc->flags, status_desc->next);
if (v3_gpa_to_hva(core, status_desc->addr_gpa, (addr_t *)&(status_ptr)) == -1) {
- PrintError("Could not translate status address\n");
+ PrintError(core->vm_info, core, "Could not translate status address\n");
return -1;
}
}
if (!(q->avail->flags & VIRTIO_NO_IRQ_FLAG)) {
- PrintDebug("Raising IRQ %d\n", blk_state->pci_dev->config_header.intr_line);
- v3_pci_raise_irq(blk_state->virtio_dev->pci_bus, 0, blk_state->pci_dev);
+ PrintDebug(core->vm_info, core, "Raising IRQ %d\n", blk_state->pci_dev->config_header.intr_line);
+ v3_pci_raise_irq(blk_state->virtio_dev->pci_bus, blk_state->pci_dev, 0);
blk_state->virtio_cfg.pci_isr = 1;
}
int port_idx = port % blk_state->io_range_size;
- PrintDebug("VIRTIO BLOCK Write for port %d (index=%d) len=%d, value=%x\n",
+ PrintDebug(core->vm_info, core, "VIRTIO BLOCK Write for port %d (index=%d) len=%d, value=%x\n",
port, port_idx, length, *(uint32_t *)src);
switch (port_idx) {
case GUEST_FEATURES_PORT:
if (length != 4) {
- PrintError("Illegal write length for guest features\n");
+ PrintError(core->vm_info, core, "Illegal write length for guest features\n");
return -1;
}
blk_state->virtio_cfg.guest_features = *(uint32_t *)src;
- PrintDebug("Setting Guest Features to %x\n", blk_state->virtio_cfg.guest_features);
+ PrintDebug(core->vm_info, core, "Setting Guest Features to %x\n", blk_state->virtio_cfg.guest_features);
break;
case VRING_PG_NUM_PORT:
blk_state->queue.ring_used_addr = (blk_state->queue.ring_used_addr + 0xfff) & ~0xfff;
if (v3_gpa_to_hva(core, blk_state->queue.ring_desc_addr, (addr_t *)&(blk_state->queue.desc)) == -1) {
- PrintError("Could not translate ring descriptor address\n");
+ PrintError(core->vm_info, core, "Could not translate ring descriptor address\n");
return -1;
}
if (v3_gpa_to_hva(core, blk_state->queue.ring_avail_addr, (addr_t *)&(blk_state->queue.avail)) == -1) {
- PrintError("Could not translate ring available address\n");
+ PrintError(core->vm_info, core, "Could not translate ring available address\n");
return -1;
}
if (v3_gpa_to_hva(core, blk_state->queue.ring_used_addr, (addr_t *)&(blk_state->queue.used)) == -1) {
- PrintError("Could not translate ring used address\n");
+ PrintError(core->vm_info, core, "Could not translate ring used address\n");
return -1;
}
- PrintDebug("RingDesc_addr=%p, Avail_addr=%p, Used_addr=%p\n",
+ PrintDebug(core->vm_info, core, "RingDesc_addr=%p, Avail_addr=%p, Used_addr=%p\n",
(void *)(blk_state->queue.ring_desc_addr),
(void *)(blk_state->queue.ring_avail_addr),
(void *)(blk_state->queue.ring_used_addr));
- PrintDebug("RingDesc=%p, Avail=%p, Used=%p\n",
+ PrintDebug(core->vm_info, core, "RingDesc=%p, Avail=%p, Used=%p\n",
blk_state->queue.desc, blk_state->queue.avail, blk_state->queue.used);
} else {
- PrintError("Illegal write length for page frame number\n");
+ PrintError(core->vm_info, core, "Illegal write length for page frame number\n");
return -1;
}
break;
blk_state->virtio_cfg.vring_queue_selector = *(uint16_t *)src;
if (blk_state->virtio_cfg.vring_queue_selector != 0) {
- PrintError("Virtio Block device only uses 1 queue, selected %d\n",
+ PrintError(core->vm_info, core, "Virtio Block device only uses 1 queue, selected %d\n",
blk_state->virtio_cfg.vring_queue_selector);
return -1;
}
break;
case VRING_Q_NOTIFY_PORT:
- PrintDebug("Handling Kick\n");
+ PrintDebug(core->vm_info, core, "Handling Kick\n");
if (handle_kick(core, blk_state) == -1) {
- PrintError("Could not handle Block Notification\n");
+ PrintError(core->vm_info, core, "Could not handle Block Notification\n");
return -1;
}
break;
blk_state->virtio_cfg.status = *(uint8_t *)src;
if (blk_state->virtio_cfg.status == 0) {
- PrintDebug("Resetting device\n");
+ PrintDebug(core->vm_info, core, "Resetting device\n");
blk_reset(blk_state);
}
int port_idx = port % blk_state->io_range_size;
- PrintDebug("VIRTIO BLOCK Read for port %d (index =%d), length=%d\n",
+ PrintDebug(core->vm_info, core, "VIRTIO BLOCK Read for port %d (index =%d), length=%d\n",
port, port_idx, length);
+
switch (port_idx) {
case HOST_FEATURES_PORT:
- if (length != 4) {
- PrintError("Illegal read length for host features\n");
+ case HOST_FEATURES_PORT + 1:
+ case HOST_FEATURES_PORT + 2:
+ case HOST_FEATURES_PORT + 3:
+ if (port_idx + length > HOST_FEATURES_PORT + 4) {
+ PrintError(core->vm_info, core, "Illegal read length for host features (len=%d)\n", length);
return -1;
}
- *(uint32_t *)dst = blk_state->virtio_cfg.host_features;
-
+ memcpy(dst, &(blk_state->virtio_cfg.host_features), length);
break;
case VRING_PG_NUM_PORT:
- if (length != 4) {
- PrintError("Illegal read length for page frame number\n");
+ case VRING_PG_NUM_PORT + 1:
+ case VRING_PG_NUM_PORT + 2:
+ case VRING_PG_NUM_PORT + 3:
+ if (port_idx + length > VRING_PG_NUM_PORT + 4) {
+ PrintError(core->vm_info, core, "Illegal read length for vring pg num (len=%d)\n", length);
return -1;
}
- *(uint32_t *)dst = blk_state->queue.pfn;
-
+ memcpy(dst, &(blk_state->queue.pfn), length);
break;
case VRING_SIZE_PORT:
- if (length != 2) {
- PrintError("Illegal read length for vring size\n");
+ case VRING_SIZE_PORT + 1:
+ if (length > 2) {
+ PrintError(core->vm_info, core, "Illegal read length for vring size (len=%d)\n", length);
return -1;
}
-
- *(uint16_t *)dst = blk_state->queue.queue_size;
+
+ memcpy(dst, &(blk_state->queue.queue_size), length);
break;
case VIRTIO_STATUS_PORT:
if (length != 1) {
- PrintError("Illegal read length for status\n");
+ PrintError(core->vm_info, core, "Illegal read length for status (len=%d)\n", length);
return -1;
}
case VIRTIO_ISR_PORT:
*(uint8_t *)dst = blk_state->virtio_cfg.pci_isr;
blk_state->virtio_cfg.pci_isr = 0;
- v3_pci_lower_irq(blk_state->virtio_dev->pci_bus, 0, blk_state->pci_dev);
+ v3_pci_lower_irq(blk_state->virtio_dev->pci_bus, blk_state->pci_dev, 0);
break;
default:
memcpy(dst, cfg_ptr + cfg_offset, length);
} else {
- PrintError("Read of Unhandled Virtio Read\n");
- return -1;
+
+ PrintError(core->vm_info,core,"Read of Unhandled Virtio Read. Returning 0\n");
+ if (length == 1) {
+ *(uint8_t *)dst = 0;
+ } else if (length == 2) {
+ *(uint16_t *)dst = 0;
+ } else if (length == 4) {
+ *(uint32_t *)dst = 0;
+ }
+
}
break;
}
+static int virtio_free(struct virtio_dev_state * virtio) {
+ struct virtio_blk_state * blk_state = NULL;
+ struct virtio_blk_state * tmp = NULL;
+
+ list_for_each_entry_safe(blk_state, tmp, &(virtio->dev_list), dev_link) {
+
+ // unregister from PCI
+
+ list_del(&(blk_state->dev_link));
+ V3_Free(blk_state);
+ }
+
+
+ V3_Free(virtio);
+
+ return 0;
+}
+
static struct v3_device_ops dev_ops = {
- .free = virtio_free,
+ .free = (int (*)(void *))virtio_free,
};
bars[i].type = PCI_BAR_NONE;
}
- PrintDebug("Virtio-BLK io_range_size = %d\n", blk_state->io_range_size);
+ PrintDebug(VM_NONE, VCORE_NONE, "Virtio-BLK io_range_size = %d\n", blk_state->io_range_size);
bars[0].type = PCI_BAR_IO;
bars[0].default_base_port = -1;
pci_dev = v3_pci_register_device(virtio->pci_bus, PCI_STD_DEVICE,
0, PCI_AUTO_DEV_NUM, 0,
"LNX_VIRTIO_BLK", bars,
- NULL, NULL, NULL, blk_state);
+ NULL, NULL, NULL, NULL, blk_state);
if (!pci_dev) {
- PrintError("Could not register PCI Device\n");
+ PrintError(VM_NONE, VCORE_NONE, "Could not register PCI Device\n");
return -1;
}
blk_state->pci_dev = pci_dev;
+
+
+ /* Add backend to list of devices */
+ list_add(&(blk_state->dev_link), &(virtio->dev_list));
/* Block configuration */
blk_state->virtio_cfg.host_features = VIRTIO_SEG_MAX;
blk_state->block_cfg.max_seg = QUEUE_SIZE - 2;
+
// Virtio Block only uses one queue
blk_state->queue.queue_size = QUEUE_SIZE;
struct virtio_dev_state * virtio = (struct virtio_dev_state *)frontend_data;
struct virtio_blk_state * blk_state = (struct virtio_blk_state *)V3_Malloc(sizeof(struct virtio_blk_state));
+
+ if (!blk_state) {
+ PrintError(vm, VCORE_NONE, "Cannot allocate in connect\n");
+ return -1;
+ }
+
+
memset(blk_state, 0, sizeof(struct virtio_blk_state));
register_dev(virtio, blk_state);
blk_state->block_cfg.capacity = ops->get_capacity(private_data) / SECTOR_SIZE;
- PrintDebug("Virtio Capacity = %d -- 0x%p\n", (int)(blk_state->block_cfg.capacity),
+ PrintDebug(vm, VCORE_NONE, "Virtio Capacity = %d -- 0x%p\n", (int)(blk_state->block_cfg.capacity),
(void *)(addr_t)(blk_state->block_cfg.capacity));
return 0;
struct virtio_dev_state * virtio_state = NULL;
char * dev_id = v3_cfg_val(cfg, "ID");
- PrintDebug("Initializing VIRTIO Block device\n");
+ PrintDebug(vm, VCORE_NONE, "Initializing VIRTIO Block device\n");
if (pci_bus == NULL) {
- PrintError("VirtIO devices require a PCI Bus");
+ PrintError(vm, VCORE_NONE, "VirtIO devices require a PCI Bus");
return -1;
}
virtio_state = (struct virtio_dev_state *)V3_Malloc(sizeof(struct virtio_dev_state));
+
+ if (!virtio_state) {
+ PrintError(vm, VCORE_NONE, "Cannot allocate in init\n");
+ return -1;
+ }
+
memset(virtio_state, 0, sizeof(struct virtio_dev_state));
INIT_LIST_HEAD(&(virtio_state->dev_list));
struct vm_device * dev = v3_add_device(vm, dev_id, &dev_ops, virtio_state);
if (dev == NULL) {
- PrintError("Could not attach device %s\n", dev_id);
+ PrintError(vm, VCORE_NONE, "Could not attach device %s\n", dev_id);
V3_Free(virtio_state);
return -1;
}
if (v3_dev_add_blk_frontend(vm, dev_id, connect_fn, (void *)virtio_state) == -1) {
- PrintError("Could not register %s as block frontend\n", dev_id);
+ PrintError(vm, VCORE_NONE, "Could not register %s as block frontend\n", dev_id);
v3_remove_device(dev);
return -1;
}