# Makefile for GeekOS kernel, userspace, and tools
# Copyright (c) 2004,2005 David H. Hovemeyer <daveho@cs.umd.edu>
-# $Revision: 1.13 $
+# $Revision: 1.53 $
# This is free software. You are permitted to use,
# redistribute, and modify it as specified in the file "COPYING".
# to speed the build process on 2 processor systems.
-
-# THESE MUST MATCH WHAT IS DEFINED IN defs.h and defs.asm exactly
-# MUST BE INTEGRAL NUMBER OF PAGES
-TOP_OF_MEM := 0x30000000
-VM_SIZE := 0x20000000
-VM_START := 0x0
-
-#
-# THE KERNEL, SETUP, BOOTPACKAGE MUST BE SMALLER THAN THIS
-# MUST BE INTEGRAL NUMBER OF PAGES
-# define
-MAX_VMM := 0x160000
-
# Base address of kernel
#
# Note: at top of memory minus three pages (GDT/TSS/IDT)
#
# The setup code needs to copy it up to this address and jump there
#
-KERNEL_BASE_ADDR := $(shell perl -e 'print sprintf("0x%x",$(TOP_OF_MEM)-4096*3-$(MAX_VMM));')
+KERNEL_BASE_ADDR := 0x00100000
# Kernel entry point function
KERNEL_ENTRY = $(SYM_PFX)Main
#when -DNDEBUG is set the kassert functions are disabled
#JRLDEBUG=-DNDEBUG
-JRLDEBUG= -DSERIAL_PRINT_DEBUG=1 -DSERIAL_PRINT_DEBUG_LEVEL=10 -DSERIAL_PRINT=1
+
+# DEBUG=1 means VMM_DEBUG, VMM_INFO, and VMM_TRACE are enabled
+# as are SERIAL_PRINT_DEBUG
+#
+DEBUG=1
+DEBUG_SECTIONS=
+
+ifeq ($(DEBUG_ALL),1)
+ DEBUG_SECTIONS:= $(DEBUG_SECTIONS) -DDEBUG_SHADOW_PAGING -DDEBUG_CTRL_REGS -DDEBUG_INTERRUPTS -DDEBUG_IO -DDEBUG_KEYBOARD -DDEBUG_PIC -DDEBUG_PIT -DDEBUG_NVRAM
+endif
+ifeq ($(DEBUG_SHADOW_PAGING),1)
+DEBUG_SECTIONS := $(DEBUG_SECTIONS) -DDEBUG_SHADOW_PAGING
+endif
+ifeq ($(DEBUG_CTRL_REGS),1)
+DEBUG_SECTIONS := $(DEBUG_SECTIONS) -DDEBUG_CTRL_REGS
+endif
+ifeq ($(DEBUG_INTERRUPTS),1)
+DEBUG_SECTIONS := $(DEBUG_SECTIONS) -DDEBUG_INTERRUPTS
+endif
+ifeq ($(DEBUG_IO),1)
+DEBUG_SECTIONS := $(DEBUG_SECTIONS) -DDEBUG_IO
+endif
+ifeq ($(DEBUG_KEYBOARD),1)
+DEBUG_SECTIONS := $(DEBUG_SECTIONS) -DDEBUG_KEYBOARD
+endif
+ifeq ($(DEBUG_PIC),1)
+DEBUG_SECTIONS := $(DEBUG_SECTIONS) -DDEBUG_PIC
+endif
+ifeq ($(DEBUG_PIT),1)
+DEBUG_SECTIONS := $(DEBUG_SECTIONS) -DDEBUG_PIT
+endif
+ifeq ($(DEBUG_NVRAM),1)
+DEBUG_SECTIONS := $(DEBUG_SECTIONS) -DDEBUG_NVRAM
+endif
+
+
+ifeq ($(DEBUG),1)
+ JRLDEBUG= -DSERIAL_PRINT_DEBUG=1 -DSERIAL_PRINT_DEBUG_LEVEL=10 -DSERIAL_PRINT=1 -DVMM_DEBUG=1 -DVMM_INFO=1 -DVMM_TRACE=1 $(DEBUG_SECTIONS)
+
+else
+ JRLDEBUG= -DSERIAL_PRINT_DEBUG=0 -DSERIAL_PRINT_DEBUG_LEVEL=999999 -DSERIAL_PRINT=0 -DVMM_DEBUG=0 -DVMM_INFO=0 -DVMM_TRACE=0
+endif
+
#
+# DECODER is the decoder that will be used
+# currently we only support xed
#
-#Peter's compile flags
-PADFLAGS = -DMAX_VMM=$(MAX_VMM)
+DECODER=XED
+
+DECODER_FLAGS=
+DECODER_SRCS=
+DECODER_LIBS=
+
+ifeq ($(DECODER),XED)
+DECODER_SRCS := vmm_xed.c
+DECODER_FLAGS := -L../lib/xed
+DECODER_LIBS := -lxed
+else
+# This is an error
+endif
+
+#
+# This is wrong for current cygwin - no changes needed
+#
# Figure out if we're compiling with cygwin, http://cygwin.com
-SYSTEM_NAME := $(shell uname -s)
-ifeq ($(findstring CYGWIN,$(SYSTEM_NAME)),CYGWIN)
-SYM_PFX := _
-EXTRA_C_OPTS := -DNEED_UNDERSCORE -DGNU_WIN32
-EXTRA_NASM_OPTS := -DNEED_UNDERSCORE
-NON_ELF_SYSTEM := yes
-EXTRA_CC_USER_OPTS := -Dmain=geekos_main
-endif
+#
+#
+#SYSTEM_NAME := $(shell uname -s)
+#ifeq ($(findstring CYGWIN,$(SYSTEM_NAME)),CYGWIN)
+#SYM_PFX := _
+#EXTRA_C_OPTS := -DNEED_UNDERSCORE -DGNU_WIN32
+#EXTRA_NASM_OPTS := -DNEED_UNDERSCORE
+#NON_ELF_SYSTEM := yes
+#EXTRA_CC_USER_OPTS := -Dmain=geekos_main
+#endif
+
-VMM_SIZES = ../include/geekos/vmm_sizes.h
# ----------------------------------------------------------------------
# List of targets to build by default.
# These targets encompass everything needed to boot
# and run GeekOS.
-ALL_TARGETS := fd.img vm_kernel
+ALL_TARGETS := vmm.img vm_kernel
# Kernel source files
bget.c malloc.c \
synch.c kthread.c \
serial.c reboot.c \
- paging.c vmx.c vmcs_gen.c vmcs.c \
- svm.c vmm.c vmm_util.c vmm_stubs.c \
- vmcb.c vmm_mem.c vm_guest.c \
- debug.c\
+ paging.c \
+ debug.c vmm_stubs.c vm.c pci.c\
main.c
# Kernel object files built from C source files
KERNEL_C_OBJS := $(KERNEL_C_SRCS:%.c=geekos/%.o)
# Kernel assembly files
-KERNEL_ASM_SRCS := lowlevel.asm vmx_lowlevel.asm svm_lowlevel.asm
+KERNEL_ASM_SRCS := lowlevel.asm
-KERNEL_GAS_SRCS := testvm.s
+KERNEL_GAS_SRCS := testvm.s udivdi3.s
# Kernel object files build from assembler source files
KERNEL_ASM_OBJS := $(KERNEL_ASM_SRCS:%.asm=geekos/%.o)
# Common library object files.
COMMON_C_OBJS := $(COMMON_C_SRCS:%.c=common/%.o)
+VMM_ASM_SRCS := svm_lowlevel.asm \
+# vmx_lowlevel.asm
+
+VMM_ASM_OBJS := $(VMM_ASM_SRCS:%.asm=palacios/%.o)
+
+
+VMM_C_SRCS := vm_guest.c \
+ svm.c svm_handler.c vmm.c vmm_util.c vmm_ctrl_regs.c \
+ vmcb.c vmm_mem.c vmm_paging.c vmm_io.c vmm_debug.c svm_io.c \
+ vmm_intr.c vmm_time.c \
+ vmm_shadow_paging.c vm_guest_mem.c \
+ vm_dev.c vmm_dev_mgr.c vmm_decoder.c \
+ svm_halt.c svm_pause.c vmm_config.c \
+ $(DECODER_SRCS)
+#\
+# vmx.c vmcs_gen.c vmcs.c
+
+VMM_C_OBJS := $(VMM_C_SRCS:%.c=palacios/%.o)
+
+VMM_OBJS := $(VMM_C_OBJS) $(VMM_ASM_OBJS)
+
+
+
+
+DEVICE_C_SRCS := generic.c keyboard.c nvram.c timer.c simple_pic.c 8259a.c 8254.c serial.c
+
+DEVICE_C_OBJS := $(DEVICE_C_SRCS:%.c=devices/%.o)
+
+DEVICE_OBJS := $(DEVICE_C_OBJS)
+
+V3LIBS := $(DECODER_LIBS)
NUMSECS := $(PERL) $(PROJECT_ROOT)/scripts/numsecs
+FD_SECTORS_PER_TRACK := $(PERL) $(PROJECT_ROOT)/scripts/numsecs_per_track
+
+
# ----------------------------------------------------------------------
# Definitions -
# Options passed to the tools.
# ----------------------------------------------------------------------
# Flags used for all C source files
-GENERAL_OPTS := -O -Wall $(EXTRA_C_OPTS) $(JRLDEBUG) $(PADFLAGS)
+GENERAL_OPTS := -O -Wall $(EXTRA_C_OPTS) $(VMM_FLAGS) -fPIC
CC_GENERAL_OPTS := $(GENERAL_OPTS) -Werror
# Flags used for kernel C source files
CC_KERNEL_OPTS := -g -DGEEKOS -I$(PROJECT_ROOT)/include
+# Flags used for VMM C source files
+CC_VMM_OPTS := -g -I$(PROJECT_ROOT)/include -D__V3VEE__ -D__V3_32BIT__ $(DECODER_FLAGS) $(JRLDEBUG)
+
+# Flags used for VMM C ASM files
+NASM_VMM_OPTS := -I$(PROJECT_ROOT)/src/palacios/ -f elf $(EXTRA_NASM_OPTS)
+
# Flags user for kernel assembly files
NASM_KERNEL_OPTS := -I$(PROJECT_ROOT)/src/geekos/ -f elf $(EXTRA_NASM_OPTS)
common/%.o : common/%.c
$(TARGET_CC) -c $(CC_GENERAL_OPTS) $(CC_USER_OPTS) $< -o common/$*.o
+palacios/%.o : palacios/%.c
+ $(TARGET_CC) -c $(CC_GENERAL_OPTS) $(CC_VMM_OPTS) $< -o palacios/$*.o
+
+palacios/%.o : palacios/%.asm
+ $(NASM) $(NASM_VMM_OPTS) $< -o palacios/$*.o
+
+devices/%.o : devices/%.c
+ $(TARGET_CC) -c $(CC_GENERAL_OPTS) $(CC_VMM_OPTS) $< -o devices/$*.o
+
+devices/%.o : devices/%.asm
+ $(NASM) $(NASM_VMM_OPTS) $< -o devices/$*.o
+
# ----------------------------------------------------------------------
# Targets -
# Specifies files to be built
all : $(ALL_TARGETS)
-geekos/vmx_lowlevel.o: $(PROJECT_ROOT)/src/geekos/vmx_lowlevel.asm
- $(NASM) -O99 \
- -f elf \
- -I$(PROJECT_ROOT)/src/geekos/ \
- $(PROJECT_ROOT)/src/geekos/vmx_lowlevel.asm \
- -o $@
+#geekos/vmx_lowlevel.o: $(PROJECT_ROOT)/src/geekos/vmx_lowlevel.asm
+# $(NASM) -O99 \
+# -f elf \
+# -I$(PROJECT_ROOT)/src/geekos/ \
+# $(PROJECT_ROOT)/src/geekos/vmx_lowlevel.asm \
+# -o $@
-geekos/test: geekos/test.o geekos/vmcs.o geekos/vmx_lowlevel.o
- $(CC) geekos/test.o geekos/vmcs.o geekos/vmx_lowlevel.o -o geekos/test
+#geekos/test: geekos/test.o geekos/vmcs.o geekos/vmx_lowlevel.o
+# $(CC) geekos/test.o geekos/vmcs.o geekos/vmx_lowlevel.o -o geekos/test
# Standard floppy image - just boots the kernel
-fd.img : geekos/fd_boot.bin geekos/setup.bin geekos/kernel.bin vm_kernel
+fd.img : geekos/fd_boot.bin geekos/setup.bin geekos/kernel.bin
cat geekos/fd_boot.bin geekos/setup.bin geekos/kernel.bin > _temp
$(PAD) _temp 512
- cat _temp vm_kernel > $@
+ cp _temp fd.img
-# make ready to boot over PXE
-pxe: fd.img
- cp fd.img /tftpboot/vmm.img
- $(PAD) /tftpboot/vmm.img 1474560
+vmm.img : fd.img
+ cp fd.img vmm.img
+ $(PAD) vmm.img 1474560
+force_rombios:
+ (cd ../src/vmboot/rombios; make clean; make)
-pxe-discovery-pdinda: fd.img
- cp fd.img geekos.img
- $(PAD) geekos.img 1474560
- /usr/local/vmm-util/pxe_cp geekos.img
- /usr/local/vmm-util/tty_perm pdinda
- echo "Copied file to PXE boot area and set serial permissions for pdinda"
+force_vgabios:
+ (cd ../src/vmboot/vgabios; make clean; make)
+
+force_payload: force_rombios force_vgabios
+ ../scripts/make_payload.pl payload_layout.txt vm_kernel
+
+inter1: force_payload
+ -make clean
+
+world: inter1 vmm.img
+
+# make ready to boot over PXE
+pxe: vmm.img
+ cp vmm.img /tftpboot/vmm.img
+
+run: vmm.img
+ /usr/local/qemu/bin/qemu-system-x86_64 -m 1024 -serial file:serial.out -cdrom puppy.iso -fda vmm.img
-pxe-discovery-bjp600: fd.img
- cp fd.img geekos.img
- $(PAD) geekos.img 1474560
- /usr/local/vmm-util/pxe_cp geekos.img
- /usr/local/vmm-util/tty_perm bjp600
- echo "Copied file to PXE boot area and set serial permissions for pdinda"
# Floppy boot sector (first stage boot loader).
-geekos/fd_boot.bin : geekos/setup.bin geekos/kernel.bin $(PROJECT_ROOT)/src/geekos/fd_boot.asm vm_kernel
+geekos/fd_boot.bin : geekos/setup.bin geekos/kernel.bin $(PROJECT_ROOT)/src/geekos/fd_boot.asm
$(NASM) -f bin \
-I$(PROJECT_ROOT)/src/geekos/ \
-DNUM_SETUP_SECTORS=`$(NUMSECS) geekos/setup.bin` \
-DNUM_KERN_SECTORS=`$(NUMSECS) geekos/kernel.bin` \
- -DNUM_VM_KERNEL_SECTORS=`$(NUMSECS) vm_kernel` \
+ -DSECTORS_PER_TRACK=`$(FD_SECTORS_PER_TRACK) geekos/kernel.bin geekos/setup.bin` \
$(PROJECT_ROOT)/src/geekos/fd_boot.asm \
-o $@
# Setup program (second stage boot loader).
-geekos/setup.bin : geekos/kernel.exe $(PROJECT_ROOT)/src/geekos/setup.asm
+geekos/setup.bin : geekos/kernel.bin $(PROJECT_ROOT)/src/geekos/setup.asm
$(NASM) -f bin \
-I$(PROJECT_ROOT)/src/geekos/ \
-DENTRY_POINT=0x`egrep 'Main$$' geekos/kernel.syms |awk '{print $$1}'` \
- -DVMM_FINAL_ADDR=$(KERNEL_BASE_ADDR) \
- -DVMM_SIZE=$(MAX_VMM) \
+ -DVMM_SIZE=`$(NUMSECS) geekos/kernel.bin` \
$(PROJECT_ROOT)/src/geekos/setup.asm \
-o $@
$(PAD) $@ 512
$(PAD) $@ 512
# The kernel executable and symbol map.
-geekos/kernel.exe : $(KERNEL_OBJS) $(COMMON_C_OBJS)
+geekos/kernel.exe : $(KERNEL_OBJS) $(COMMON_C_OBJS) $(VMM_OBJS) $(DEVICE_OBJS) vm_kernel
$(TARGET_LD) -o geekos/kernel.exe -Ttext $(KERNEL_BASE_ADDR) -e $(KERNEL_ENTRY) \
- $(KERNEL_OBJS) $(COMMON_C_OBJS)
+ $(DECODER_FLAGS) \
+ $(KERNEL_OBJS) $(COMMON_C_OBJS) $(VMM_OBJS) $(DEVICE_OBJS) $(V3LIBS) -b binary vm_kernel
$(TARGET_NM) geekos/kernel.exe > geekos/kernel.syms
-generate_sizes: force
- echo "#ifndef __vmm_sizes" > $(VMM_SIZES)
- echo "#define __vmm_sizes" >> $(VMM_SIZES)
- echo "#define KERNEL_LOAD_ADDRESS " $(KERNEL_BASE_ADDR) >> $(VMM_SIZES)
-
- echo "#define KERNEL_START (KERNEL_LOAD_ADDRESS)" >> $(VMM_SIZES)
- echo "#define KERNEL_CORE_LENGTH (" `$(NUMSECS) geekos/kernel.bin` "*512)" >> $(VMM_SIZES)
- echo "#define KERNEL_END (KERNEL_LOAD_ADDRESS+KERNEL_CORE_LENGTH-1)" >> $(VMM_SIZES)
-
- echo "#define VM_KERNEL_LENGTH (" `$(NUMSECS) vm_kernel` "*512)" >> $(VMM_SIZES)
- echo "#define VM_KERNEL_START (KERNEL_LOAD_ADDRESS + KERNEL_CORE_LENGTH)" >> $(VMM_SIZES)
- echo "#define VM_BOOT_PACKAGE_START (VM_KERNEL_START) " >> $(VMM_SIZES)
- echo "#define VM_BOOT_PACKAGE_END (VM_KERNEL_START+VM_KERNEL_LENGTH-1) " >> $(VMM_SIZES)
- echo "#endif" >> $(VMM_SIZES)
-
-make_show_sizes: generate_sizes ../src/geekos/show_sizes.c
- $(HOST_CC) -I../include/geekos ../src/geekos/show_sizes.c -o show_sizes
-
-show_sizes: make_show_sizes
- ./show_sizes
-
+force:
-get_kernel_size: make_show_sizes
- ./show_sizes | grep
-force:
+#vm_kernel: force
+# $(PAD) vm_kernel 512
+# @echo "VM kernel lives at 0x100000 and is" `$(NUMSECS) vm_kernel` "sectors long"
-vm_kernel: force
- $(PAD) vm_kernel 512
- @echo "VM kernel lives at 0x100000 and is" `$(NUMSECS) vm_kernel` "sectors long"
# Clean build directories of generated files
clean :
- for d in geekos common libc user tools; do \
+ for d in geekos common libc user tools palacios devices; do \
(cd $$d && rm -f *); \
done
$(COMMON_C_SRCS:%.c=$(PROJECT_ROOT)/src/common/%.c) \
| $(PERL) -n -e 's,^(\S),common/$$1,;print' \
>> depend.mak
+ $(TARGET_CC) -M $(CC_GENERAL_OPTS) $(CC_KERNEL_OPTS) \
+ $(VMM_C_SRCS:%.c=$(PROJECT_ROOT)/src/palacios/%.c) \
+ | $(PERL) -n -e 's,^(\S),palacios/$$1,;print' \
+ >> depend.mak
+ $(TARGET_CC) -M $(CC_GENERAL_OPTS) $(CC_KERNEL_OPTS) \
+ $(DEVICE_C_SRCS:%.c=$(PROJECT_ROOT)/src/devices/%.c) \
+ | $(PERL) -n -e 's,^(\S),devices/$$1,;print' \
+ >> depend.mak
# By default, there are no header file dependencies.
depend.mak :