palacios/src/palacios/vmx.c

   1 /*
   2  * This file is part of the Palacios Virtual Machine Monitor developed
   3  * by the V3VEE Project with funding from the United States National
   4  * Science Foundation and the Department of Energy.
   5  *
   6  * The V3VEE Project is a joint project between Northwestern University
   7  * and the University of New Mexico.  You can find out more at
   8  * http://www.v3vee.org
   9  *
  10  * Copyright (c) 2011, Jack Lange <jarusl@cs.northwestern.edu>
  11  * Copyright (c) 2011, The V3VEE Project <http://www.v3vee.org>
  12  * All rights reserved.
  13  *
  14  * Author: Jack Lange <jarusl@cs.northwestern.edu>
  15  *
  16  * This is free software.  You are permitted to use,
  17  * redistribute, and modify it as specified in the file "V3VEE_LICENSE".
  18  */
  19
  20
  21 #include <palacios/vmx.h>
  22 #include <palacios/vmm.h>
  23 #include <palacios/vmx_handler.h>
  24 #include <palacios/vmcs.h>
  25 #include <palacios/vmx_lowlevel.h>
  26 #include <palacios/vmm_lowlevel.h>
  27 #include <palacios/vmm_ctrl_regs.h>
  28 #include <palacios/vmm_config.h>
  29 #include <palacios/vmm_time.h>
  30 #include <palacios/vm_guest_mem.h>
  31 #include <palacios/vmm_direct_paging.h>
  32 #include <palacios/vmx_io.h>
  33 #include <palacios/vmx_msr.h>
  34 #include <palacios/vmm_decoder.h>
  35 #include <palacios/vmm_barrier.h>
  36 #include <palacios/vmm_timeout.h>
  37
  38 #ifdef V3_CONFIG_CHECKPOINT
  39 #include <palacios/vmm_checkpoint.h>
  40 #endif
  41
  42 #include <palacios/vmx_ept.h>
  43 #include <palacios/vmx_assist.h>
  44 #include <palacios/vmx_hw_info.h>
  45
  46 #ifndef V3_CONFIG_DEBUG_VMX
  47 #undef PrintDebug
  48 #define PrintDebug(fmt, args...)
  49 #endif
  50
  51
  52 /* These fields contain the hardware feature sets supported by the local CPU */
  53 static struct vmx_hw_info hw_info;
  54
  55 extern v3_cpu_arch_t v3_mach_type;
  56
  57 static addr_t host_vmcs_ptrs[V3_CONFIG_MAX_CPUS] = { [0 ... V3_CONFIG_MAX_CPUS - 1] = 0};
  58
  59 extern int v3_vmx_launch(struct v3_gprs * vm_regs, struct guest_info * info, struct v3_ctrl_regs * ctrl_regs);
  60 extern int v3_vmx_resume(struct v3_gprs * vm_regs, struct guest_info * info, struct v3_ctrl_regs * ctrl_regs);
  61
  62 static int inline check_vmcs_write(vmcs_field_t field, addr_t val) {
  63     int ret = 0;
  64
  65     ret = vmcs_write(field, val);
  66
  67     if (ret != VMX_SUCCESS) {
  68         PrintError("VMWRITE error on %s!: %d\n", v3_vmcs_field_to_str(field), ret);
  69         return 1;
  70     }
  71
  72
  73
  74
  75     return 0;
  76 }
  77
  78 static int inline check_vmcs_read(vmcs_field_t field, void * val) {
  79     int ret = 0;
  80
  81     ret = vmcs_read(field, val);
  82
  83     if (ret != VMX_SUCCESS) {
  84         PrintError("VMREAD error on %s!: %d\n", v3_vmcs_field_to_str(field), ret);
  85     }
  86
  87     return ret;
  88 }
  89
  90
  91
  92
  93 static addr_t allocate_vmcs() {
  94     struct vmcs_data * vmcs_page = NULL;
  95
  96     PrintDebug("Allocating page\n");
  97
  98     vmcs_page = (struct vmcs_data *)V3_VAddr(V3_AllocPages(1));
  99     memset(vmcs_page, 0, 4096);
 100
 101     vmcs_page->revision = hw_info.basic_info.revision;
 102     PrintDebug("VMX Revision: 0x%x\n", vmcs_page->revision);
 103
 104     return (addr_t)V3_PAddr((void *)vmcs_page);
 105 }
 106
 107
 108 #if 0
 109 static int debug_efer_read(struct guest_info * core, uint_t msr, struct v3_msr * src, void * priv_data) {
 110     struct v3_msr * efer = (struct v3_msr *)&(core->ctrl_regs.efer);
 111     V3_Print("\n\nEFER READ (val = %p)\n", (void *)efer->value);
 112
 113     v3_print_guest_state(core);
 114     v3_print_vmcs();
 115
 116
 117     src->value = efer->value;
 118     return 0;
 119 }
 120
 121 static int debug_efer_write(struct guest_info * core, uint_t msr, struct v3_msr src, void * priv_data) {
 122     struct v3_msr * efer = (struct v3_msr *)&(core->ctrl_regs.efer);
 123     V3_Print("\n\nEFER WRITE (old_val = %p) (new_val = %p)\n", (void *)efer->value, (void *)src.value);
 124
 125     v3_print_guest_state(core);
 126     v3_print_vmcs();
 127
 128     efer->value = src.value;
 129
 130     return 0;
 131 }
 132 #endif
 133
 134
 135 static int init_vmcs_bios(struct guest_info * core, struct vmx_data * vmx_state) {
 136     int vmx_ret = 0;
 137
 138     /* Get Available features */
 139     struct vmx_pin_ctrls avail_pin_ctrls;
 140     avail_pin_ctrls.value = v3_vmx_get_ctrl_features(&(hw_info.pin_ctrls));
 141     /* ** */
 142
 143
 144     // disable global interrupts for vm state initialization
 145     v3_disable_ints();
 146
 147     PrintDebug("Loading VMCS\n");
 148     vmx_ret = vmcs_load(vmx_state->vmcs_ptr_phys);
 149     vmx_state->state = VMX_UNLAUNCHED;
 150
 151     if (vmx_ret != VMX_SUCCESS) {
 152         PrintError("VMPTRLD failed\n");
 153         return -1;
 154     }
 155
 156
 157     /*** Setup default state from HW ***/
 158
 159     vmx_state->pin_ctrls.value = hw_info.pin_ctrls.def_val;
 160     vmx_state->pri_proc_ctrls.value = hw_info.proc_ctrls.def_val;
 161     vmx_state->exit_ctrls.value = hw_info.exit_ctrls.def_val;
 162     vmx_state->entry_ctrls.value = hw_info.entry_ctrls.def_val;
 163     vmx_state->sec_proc_ctrls.value = hw_info.sec_proc_ctrls.def_val;
 164
 165     /* Print Control MSRs */
 166     V3_Print("CR0 MSR: req_val=%p, req_mask=%p\n", (void *)(addr_t)hw_info.cr0.req_val, (void *)(addr_t)hw_info.cr0.req_mask);
 167     V3_Print("CR4 MSR: req_val=%p, req_mask=%p\n", (void *)(addr_t)hw_info.cr4.req_val, (void *)(addr_t)hw_info.cr4.req_mask);
 168
 169
 170
 171     /******* Setup Host State **********/
 172
 173     /* Cache GDTR, IDTR, and TR in host struct */
 174
 175
 176     /********** Setup VMX Control Fields ***********/
 177
 178     /* Add external interrupts, NMI exiting, and virtual NMI */
 179     vmx_state->pin_ctrls.nmi_exit = 1;
 180     vmx_state->pin_ctrls.ext_int_exit = 1;
 181
 182
 183     /* We enable the preemption timer by default to measure accurate guest time */
 184     if (avail_pin_ctrls.active_preempt_timer) {
 185         V3_Print("VMX Preemption Timer is available\n");
 186         vmx_state->pin_ctrls.active_preempt_timer = 1;
 187         vmx_state->exit_ctrls.save_preempt_timer = 1;
 188     }
 189
 190     vmx_state->pri_proc_ctrls.hlt_exit = 1;
 191
 192
 193     vmx_state->pri_proc_ctrls.pause_exit = 0;
 194     vmx_state->pri_proc_ctrls.tsc_offset = 1;
 195 #ifdef V3_CONFIG_TIME_VIRTUALIZE_TSC
 196     vmx_state->pri_proc_ctrls.rdtsc_exit = 1;
 197 #endif
 198
 199     /* Setup IO map */
 200     vmx_state->pri_proc_ctrls.use_io_bitmap = 1;
 201     vmx_ret |= check_vmcs_write(VMCS_IO_BITMAP_A_ADDR, (addr_t)V3_PAddr(core->vm_info->io_map.arch_data));
 202     vmx_ret |= check_vmcs_write(VMCS_IO_BITMAP_B_ADDR,
 203             (addr_t)V3_PAddr(core->vm_info->io_map.arch_data) + PAGE_SIZE_4KB);
 204
 205
 206     vmx_state->pri_proc_ctrls.use_msr_bitmap = 1;
 207     vmx_ret |= check_vmcs_write(VMCS_MSR_BITMAP, (addr_t)V3_PAddr(core->vm_info->msr_map.arch_data));
 208
 209
 210
 211 #ifdef __V3_64BIT__
 212     // Ensure host runs in 64-bit mode at each VM EXIT
 213     vmx_state->exit_ctrls.host_64_on = 1;
 214 #endif
 215
 216
 217
 218     // Restore host's EFER register on each VM EXIT
 219     vmx_state->exit_ctrls.ld_efer = 1;
 220
 221     // Save/restore guest's EFER register to/from VMCS on VM EXIT/ENTRY
 222     vmx_state->exit_ctrls.save_efer = 1;
 223     vmx_state->entry_ctrls.ld_efer  = 1;
 224
 225     vmx_state->exit_ctrls.save_pat = 1;
 226     vmx_state->exit_ctrls.ld_pat = 1;
 227     vmx_state->entry_ctrls.ld_pat = 1;
 228
 229     /* Temporary GPF trap */
 230     //  vmx_state->excp_bmap.gp = 1;
 231
 232     // Setup Guests initial PAT field
 233     vmx_ret |= check_vmcs_write(VMCS_GUEST_PAT, 0x0007040600070406LL);
 234
 235     /* Setup paging */
 236     if (core->shdw_pg_mode == SHADOW_PAGING) {
 237         PrintDebug("Creating initial shadow page table\n");
 238
 239         if (v3_init_passthrough_pts(core) == -1) {
 240             PrintError("Could not initialize passthrough page tables\n");
 241             return -1;
 242         }
 243
 244 #define CR0_PE 0x00000001
 245 #define CR0_PG 0x80000000
 246 #define CR0_WP 0x00010000 // To ensure mem hooks work
 247 #define CR0_NE 0x00000020
 248         vmx_ret |= check_vmcs_write(VMCS_CR0_MASK, (CR0_PE | CR0_PG | CR0_WP | CR0_NE));
 249
 250
 251         // Cause VM_EXIT whenever CR4.VMXE or CR4.PAE bits are written
 252         vmx_ret |= check_vmcs_write(VMCS_CR4_MASK, CR4_VMXE | CR4_PAE);
 253
 254         core->ctrl_regs.cr3 = core->direct_map_pt;
 255
 256         // vmx_state->pinbased_ctrls |= NMI_EXIT;
 257
 258         /* Add CR exits */
 259         vmx_state->pri_proc_ctrls.cr3_ld_exit = 1;
 260         vmx_state->pri_proc_ctrls.cr3_str_exit = 1;
 261
 262         vmx_state->pri_proc_ctrls.invlpg_exit = 1;
 263
 264         /* Add page fault exits */
 265         vmx_state->excp_bmap.pf = 1;
 266
 267         // Setup VMX Assist
 268         v3_vmxassist_init(core, vmx_state);
 269
 270         // Hook all accesses to EFER register
 271         v3_hook_msr(core->vm_info, EFER_MSR,
 272                     &v3_handle_efer_read,
 273                     &v3_handle_efer_write,
 274                     core);
 275
 276     } else if ((core->shdw_pg_mode == NESTED_PAGING) &&
 277                (v3_mach_type == V3_VMX_EPT_CPU)) {
 278
 279 #define CR0_PE 0x00000001
 280 #define CR0_PG 0x80000000
 281 #define CR0_WP 0x00010000 // To ensure mem hooks work
 282 #define CR0_NE 0x00000020
 283         vmx_ret |= check_vmcs_write(VMCS_CR0_MASK, (CR0_PE | CR0_PG | CR0_WP | CR0_NE));
 284
 285         // vmx_state->pinbased_ctrls |= NMI_EXIT;
 286
 287         // Cause VM_EXIT whenever CR4.VMXE or CR4.PAE bits are written
 288         vmx_ret |= check_vmcs_write(VMCS_CR4_MASK, CR4_VMXE | CR4_PAE);
 289
 290         /* Disable CR exits */
 291         vmx_state->pri_proc_ctrls.cr3_ld_exit = 0;
 292         vmx_state->pri_proc_ctrls.cr3_str_exit = 0;
 293
 294         vmx_state->pri_proc_ctrls.invlpg_exit = 0;
 295
 296         /* Add page fault exits */
 297         //      vmx_state->excp_bmap.pf = 1; // This should never happen..., enabled to catch bugs
 298
 299         // Setup VMX Assist
 300         v3_vmxassist_init(core, vmx_state);
 301
 302         /* Enable EPT */
 303         vmx_state->pri_proc_ctrls.sec_ctrls = 1; // Enable secondary proc controls
 304         vmx_state->sec_proc_ctrls.enable_ept = 1; // enable EPT paging
 305
 306
 307
 308         if (v3_init_ept(core, &hw_info) == -1) {
 309             PrintError("Error initializing EPT\n");
 310             return -1;
 311         }
 312
 313         // Hook all accesses to EFER register
 314         v3_hook_msr(core->vm_info, EFER_MSR, NULL, NULL, NULL);
 315
 316     } else if ((core->shdw_pg_mode == NESTED_PAGING) &&
 317                (v3_mach_type == V3_VMX_EPT_UG_CPU)) {
 318         int i = 0;
 319         // For now we will assume that unrestricted guest mode is assured w/ EPT
 320
 321
 322         core->vm_regs.rsp = 0x00;
 323         core->rip = 0xfff0;
 324         core->vm_regs.rdx = 0x00000f00;
 325         core->ctrl_regs.rflags = 0x00000002; // The reserved bit is always 1
 326         core->ctrl_regs.cr0 = 0x60010030;
 327         core->ctrl_regs.cr4 = 0x00002010; // Enable VMX and PSE flag
 328
 329
 330         core->segments.cs.selector = 0xf000;
 331         core->segments.cs.limit = 0xffff;
 332         core->segments.cs.base = 0x0000000f0000LL;
 333
 334         // (raw attributes = 0xf3)
 335         core->segments.cs.type = 0xb;
 336         core->segments.cs.system = 0x1;
 337         core->segments.cs.dpl = 0x0;
 338         core->segments.cs.present = 1;
 339
 340
 341
 342         struct v3_segment * segregs [] = {&(core->segments.ss), &(core->segments.ds),
 343                                           &(core->segments.es), &(core->segments.fs),
 344                                           &(core->segments.gs), NULL};
 345
 346         for ( i = 0; segregs[i] != NULL; i++) {
 347             struct v3_segment * seg = segregs[i];
 348
 349             seg->selector = 0x0000;
 350             //    seg->base = seg->selector << 4;
 351             seg->base = 0x00000000;
 352             seg->limit = 0xffff;
 353
 354
 355             seg->type = 0x3;
 356             seg->system = 0x1;
 357             seg->dpl = 0x0;
 358             seg->present = 1;
 359             //    seg->granularity = 1;
 360
 361         }
 362
 363
 364         core->segments.gdtr.limit = 0x0000ffff;
 365         core->segments.gdtr.base = 0x0000000000000000LL;
 366
 367         core->segments.idtr.limit = 0x0000ffff;
 368         core->segments.idtr.base = 0x0000000000000000LL;
 369
 370         core->segments.ldtr.selector = 0x0000;
 371         core->segments.ldtr.limit = 0x0000ffff;
 372         core->segments.ldtr.base = 0x0000000000000000LL;
 373         core->segments.ldtr.type = 0x2;
 374         core->segments.ldtr.present = 1;
 375
 376         core->segments.tr.selector = 0x0000;
 377         core->segments.tr.limit = 0x0000ffff;
 378         core->segments.tr.base = 0x0000000000000000LL;
 379         core->segments.tr.type = 0xb;
 380         core->segments.tr.present = 1;
 381
 382         //      core->dbg_regs.dr6 = 0x00000000ffff0ff0LL;
 383         core->dbg_regs.dr7 = 0x0000000000000400LL;
 384
 385         /* Enable EPT */
 386         vmx_state->pri_proc_ctrls.sec_ctrls = 1; // Enable secondary proc controls
 387         vmx_state->sec_proc_ctrls.enable_ept = 1; // enable EPT paging
 388         vmx_state->sec_proc_ctrls.unrstrct_guest = 1; // enable unrestricted guest operation
 389
 390
 391         /* Disable shadow paging stuff */
 392         vmx_state->pri_proc_ctrls.cr3_ld_exit = 0;
 393         vmx_state->pri_proc_ctrls.cr3_str_exit = 0;
 394
 395         vmx_state->pri_proc_ctrls.invlpg_exit = 0;
 396
 397
 398         // Cause VM_EXIT whenever the CR4.VMXE bit is set
 399         vmx_ret |= check_vmcs_write(VMCS_CR4_MASK, CR4_VMXE);
 400 #define CR0_NE 0x00000020
 401         vmx_ret |= check_vmcs_write(VMCS_CR0_MASK, CR0_NE);
 402         //((struct cr0_32 *)&(core->shdw_pg_state.guest_cr0))->ne = 1;
 403
 404         if (v3_init_ept(core, &hw_info) == -1) {
 405             PrintError("Error initializing EPT\n");
 406             return -1;
 407         }
 408
 409         // Hook all accesses to EFER register
 410         //      v3_hook_msr(core->vm_info, EFER_MSR, &debug_efer_read, &debug_efer_write, core);
 411         v3_hook_msr(core->vm_info, EFER_MSR, NULL, NULL, NULL);
 412     } else {
 413         PrintError("Invalid Virtual paging mode (pg_mode=%d) (mach_type=%d)\n", core->shdw_pg_mode, v3_mach_type);
 414         return -1;
 415     }
 416
 417
 418     // hook vmx msrs
 419
 420     // Setup SYSCALL/SYSENTER MSRs in load/store area
 421
 422     // save STAR, LSTAR, FMASK, KERNEL_GS_BASE MSRs in MSR load/store area
 423     {
 424
 425         struct vmcs_msr_save_area * msr_entries = NULL;
 426         int max_msrs = (hw_info.misc_info.max_msr_cache_size + 1) * 4;
 427         int msr_ret = 0;
 428
 429         V3_Print("Setting up MSR load/store areas (max_msr_count=%d)\n", max_msrs);
 430
 431         if (max_msrs < 4) {
 432             PrintError("Max MSR cache size is too small (%d)\n", max_msrs);
 433             return -1;
 434         }
 435
 436         vmx_state->msr_area_paddr = (addr_t)V3_AllocPages(1);
 437
 438         if (vmx_state->msr_area_paddr == (addr_t)NULL) {
 439             PrintError("could not allocate msr load/store area\n");
 440             return -1;
 441         }
 442
 443         msr_entries = (struct vmcs_msr_save_area *)V3_VAddr((void *)(vmx_state->msr_area_paddr));
 444         vmx_state->msr_area = msr_entries; // cache in vmx_info
 445
 446         memset(msr_entries, 0, PAGE_SIZE);
 447
 448         msr_entries->guest_star.index = IA32_STAR_MSR;
 449         msr_entries->guest_lstar.index = IA32_LSTAR_MSR;
 450         msr_entries->guest_fmask.index = IA32_FMASK_MSR;
 451         msr_entries->guest_kern_gs.index = IA32_KERN_GS_BASE_MSR;
 452
 453         msr_entries->host_star.index = IA32_STAR_MSR;
 454         msr_entries->host_lstar.index = IA32_LSTAR_MSR;
 455         msr_entries->host_fmask.index = IA32_FMASK_MSR;
 456         msr_entries->host_kern_gs.index = IA32_KERN_GS_BASE_MSR;
 457
 458         msr_ret |= check_vmcs_write(VMCS_EXIT_MSR_STORE_CNT, 4);
 459         msr_ret |= check_vmcs_write(VMCS_EXIT_MSR_LOAD_CNT, 4);
 460         msr_ret |= check_vmcs_write(VMCS_ENTRY_MSR_LOAD_CNT, 4);
 461
 462         msr_ret |= check_vmcs_write(VMCS_EXIT_MSR_STORE_ADDR, (addr_t)V3_PAddr(msr_entries->guest_msrs));
 463         msr_ret |= check_vmcs_write(VMCS_ENTRY_MSR_LOAD_ADDR, (addr_t)V3_PAddr(msr_entries->guest_msrs));
 464         msr_ret |= check_vmcs_write(VMCS_EXIT_MSR_LOAD_ADDR, (addr_t)V3_PAddr(msr_entries->host_msrs));
 465
 466
 467         msr_ret |= v3_hook_msr(core->vm_info, IA32_STAR_MSR, NULL, NULL, NULL);
 468         msr_ret |= v3_hook_msr(core->vm_info, IA32_LSTAR_MSR, NULL, NULL, NULL);
 469         msr_ret |= v3_hook_msr(core->vm_info, IA32_FMASK_MSR, NULL, NULL, NULL);
 470         msr_ret |= v3_hook_msr(core->vm_info, IA32_KERN_GS_BASE_MSR, NULL, NULL, NULL);
 471
 472
 473         // IMPORTANT: These MSRs appear to be cached by the hardware....
 474         msr_ret |= v3_hook_msr(core->vm_info, SYSENTER_CS_MSR, NULL, NULL, NULL);
 475         msr_ret |= v3_hook_msr(core->vm_info, SYSENTER_ESP_MSR, NULL, NULL, NULL);
 476         msr_ret |= v3_hook_msr(core->vm_info, SYSENTER_EIP_MSR, NULL, NULL, NULL);
 477
 478         msr_ret |= v3_hook_msr(core->vm_info, FS_BASE_MSR, NULL, NULL, NULL);
 479         msr_ret |= v3_hook_msr(core->vm_info, GS_BASE_MSR, NULL, NULL, NULL);
 480
 481         msr_ret |= v3_hook_msr(core->vm_info, IA32_PAT_MSR, NULL, NULL, NULL);
 482
 483         // Not sure what to do about this... Does not appear to be an explicit hardware cache version...
 484         msr_ret |= v3_hook_msr(core->vm_info, IA32_CSTAR_MSR, NULL, NULL, NULL);
 485
 486         if (msr_ret != 0) {
 487             PrintError("Error configuring MSR save/restore area\n");
 488             return -1;
 489         }
 490
 491
 492     }
 493
 494     /* Sanity check ctrl/reg fields against hw_defaults */
 495
 496
 497
 498
 499     /*** Write all the info to the VMCS ***/
 500
 501     /*
 502     {
 503         // IS THIS NECESSARY???
 504 #define DEBUGCTL_MSR 0x1d9
 505         struct v3_msr tmp_msr;
 506         v3_get_msr(DEBUGCTL_MSR, &(tmp_msr.hi), &(tmp_msr.lo));
 507         vmx_ret |= check_vmcs_write(VMCS_GUEST_DBG_CTL, tmp_msr.value);
 508         core->dbg_regs.dr7 = 0x400;
 509     }
 510     */
 511
 512 #ifdef __V3_64BIT__
 513     vmx_ret |= check_vmcs_write(VMCS_LINK_PTR, (addr_t)0xffffffffffffffffULL);
 514 #else
 515     vmx_ret |= check_vmcs_write(VMCS_LINK_PTR, (addr_t)0xffffffffUL);
 516     vmx_ret |= check_vmcs_write(VMCS_LINK_PTR_HIGH, (addr_t)0xffffffffUL);
 517 #endif
 518
 519
 520
 521
 522     if (v3_update_vmcs_ctrl_fields(core)) {
 523         PrintError("Could not write control fields!\n");
 524         return -1;
 525     }
 526
 527     /*
 528     if (v3_update_vmcs_host_state(core)) {
 529         PrintError("Could not write host state\n");
 530         return -1;
 531     }
 532     */
 533
 534     // reenable global interrupts for vm state initialization now
 535     // that the vm state is initialized. If another VM kicks us off,
 536     // it'll update our vmx state so that we know to reload ourself
 537     v3_enable_ints();
 538
 539     return 0;
 540 }
 541
 542
 543 static void __init_vmx_vmcs(void * arg) {
 544     struct guest_info * core = arg;
 545     struct vmx_data * vmx_state = NULL;
 546     int vmx_ret = 0;
 547
 548     vmx_state = (struct vmx_data *)V3_Malloc(sizeof(struct vmx_data));
 549     memset(vmx_state, 0, sizeof(struct vmx_data));
 550
 551     PrintDebug("vmx_data pointer: %p\n", (void *)vmx_state);
 552
 553     PrintDebug("Allocating VMCS\n");
 554     vmx_state->vmcs_ptr_phys = allocate_vmcs();
 555
 556     PrintDebug("VMCS pointer: %p\n", (void *)(vmx_state->vmcs_ptr_phys));
 557
 558     core->vmm_data = vmx_state;
 559     vmx_state->state = VMX_UNLAUNCHED;
 560
 561     PrintDebug("Initializing VMCS (addr=%p)\n", core->vmm_data);
 562
 563     // TODO: Fix vmcs fields so they're 32-bit
 564
 565     PrintDebug("Clearing VMCS: %p\n", (void *)vmx_state->vmcs_ptr_phys);
 566     vmx_ret = vmcs_clear(vmx_state->vmcs_ptr_phys);
 567
 568     if (vmx_ret != VMX_SUCCESS) {
 569         PrintError("VMCLEAR failed\n");
 570         return;
 571     }
 572
 573     if (core->vm_info->vm_class == V3_PC_VM) {
 574         PrintDebug("Initializing VMCS\n");
 575         if (init_vmcs_bios(core, vmx_state) == -1) {
 576             PrintError("Error initializing VMCS to BIOS state\n");
 577             return;
 578         }
 579     } else {
 580         PrintError("Invalid VM Class\n");
 581         return;
 582     }
 583
 584     PrintDebug("Serializing VMCS: %p\n", (void *)vmx_state->vmcs_ptr_phys);
 585     vmx_ret = vmcs_clear(vmx_state->vmcs_ptr_phys);
 586
 587     core->core_run_state = CORE_STOPPED;
 588     return;
 589 }
 590
 591
 592
 593 int v3_init_vmx_vmcs(struct guest_info * core, v3_vm_class_t vm_class) {
 594     extern v3_cpu_arch_t v3_cpu_types[];
 595
 596     if (v3_cpu_types[V3_Get_CPU()] == V3_INVALID_CPU) {
 597         int i = 0;
 598
 599         for (i = 0; i < V3_CONFIG_MAX_CPUS; i++) {
 600             if (v3_cpu_types[i] != V3_INVALID_CPU) {
 601                 break;
 602             }
 603         }
 604
 605         if (i == V3_CONFIG_MAX_CPUS) {
 606             PrintError("Could not find VALID CPU for VMX guest initialization\n");
 607             return -1;
 608         }
 609
 610         V3_Call_On_CPU(i, __init_vmx_vmcs, core);
 611
 612     } else {
 613         __init_vmx_vmcs(core);
 614     }
 615
 616     if (core->core_run_state != CORE_STOPPED) {
 617         PrintError("Error initializing VMX Core\n");
 618         return -1;
 619     }
 620
 621     return 0;
 622 }
 623
 624
 625 int v3_deinit_vmx_vmcs(struct guest_info * core) {
 626     struct vmx_data * vmx_state = core->vmm_data;
 627
 628     V3_FreePages((void *)(vmx_state->vmcs_ptr_phys), 1);
 629     V3_FreePages(V3_PAddr(vmx_state->msr_area), 1);
 630
 631     V3_Free(vmx_state);
 632
 633     return 0;
 634 }
 635
 636
 637
 638 #ifdef V3_CONFIG_CHECKPOINT
 639 /*
 640  * JRL: This is broken
 641  */
 642 int v3_vmx_save_core(struct guest_info * core, void * ctx){
 643     uint64_t vmcs_ptr = vmcs_store();
 644
 645     v3_chkpt_save(ctx, "vmcs_data", PAGE_SIZE, (void *)vmcs_ptr);
 646
 647     return 0;
 648 }
 649
 650 int v3_vmx_load_core(struct guest_info * core, void * ctx){
 651     struct vmx_data * vmx_info = (struct vmx_data *)(core->vmm_data);
 652     struct cr0_32 * shadow_cr0;
 653     char vmcs[PAGE_SIZE_4KB];
 654
 655     v3_chkpt_load(ctx, "vmcs_data", PAGE_SIZE_4KB, vmcs);
 656
 657     vmcs_clear(vmx_info->vmcs_ptr_phys);
 658     vmcs_load((addr_t)vmcs);
 659
 660     v3_vmx_save_vmcs(core);
 661
 662     shadow_cr0 = (struct cr0_32 *)&(core->ctrl_regs.cr0);
 663
 664
 665     /* Get the CPU mode to set the guest_ia32e entry ctrl */
 666
 667     if (core->shdw_pg_mode == SHADOW_PAGING) {
 668         if (v3_get_vm_mem_mode(core) == VIRTUAL_MEM) {
 669             if (v3_activate_shadow_pt(core) == -1) {
 670                 PrintError("Failed to activate shadow page tables\n");
 671                 return -1;
 672             }
 673         } else {
 674             if (v3_activate_passthrough_pt(core) == -1) {
 675                 PrintError("Failed to activate passthrough page tables\n");
 676                 return -1;
 677             }
 678         }
 679     }
 680
 681     return 0;
 682 }
 683 #endif
 684
 685
 686 void v3_flush_vmx_vm_core(struct guest_info * core) {
 687     struct vmx_data * vmx_info = (struct vmx_data *)(core->vmm_data);
 688     vmcs_clear(vmx_info->vmcs_ptr_phys);
 689     vmx_info->state = VMX_UNLAUNCHED;
 690 }
 691
 692
 693
 694 static int update_irq_exit_state(struct guest_info * info) {
 695     struct vmx_exit_idt_vec_info idt_vec_info;
 696
 697     check_vmcs_read(VMCS_IDT_VECTOR_INFO, &(idt_vec_info.value));
 698
 699     if ((info->intr_core_state.irq_started == 1) && (idt_vec_info.valid == 0)) {
 700 #ifdef V3_CONFIG_DEBUG_INTERRUPTS
 701         V3_Print("Calling v3_injecting_intr\n");
 702 #endif
 703         info->intr_core_state.irq_started = 0;
 704         v3_injecting_intr(info, info->intr_core_state.irq_vector, V3_EXTERNAL_IRQ);
 705     }
 706
 707     return 0;
 708 }
 709
 710 static int update_irq_entry_state(struct guest_info * info) {
 711     struct vmx_exit_idt_vec_info idt_vec_info;
 712     struct vmcs_interrupt_state intr_core_state;
 713     struct vmx_data * vmx_info = (struct vmx_data *)(info->vmm_data);
 714
 715     check_vmcs_read(VMCS_IDT_VECTOR_INFO, &(idt_vec_info.value));
 716     check_vmcs_read(VMCS_GUEST_INT_STATE, &(intr_core_state));
 717
 718     /* Check for pending exceptions to inject */
 719     if (v3_excp_pending(info)) {
 720         struct vmx_entry_int_info int_info;
 721         int_info.value = 0;
 722
 723         // In VMX, almost every exception is hardware
 724         // Software exceptions are pretty much only for breakpoint or overflow
 725         int_info.type = 3;
 726         int_info.vector = v3_get_excp_number(info);
 727
 728         if (info->excp_state.excp_error_code_valid) {
 729             check_vmcs_write(VMCS_ENTRY_EXCP_ERR, info->excp_state.excp_error_code);
 730             int_info.error_code = 1;
 731
 732 #ifdef V3_CONFIG_DEBUG_INTERRUPTS
 733             V3_Print("Injecting exception %d with error code %x\n",
 734                     int_info.vector, info->excp_state.excp_error_code);
 735 #endif
 736         }
 737
 738         int_info.valid = 1;
 739 #ifdef V3_CONFIG_DEBUG_INTERRUPTS
 740         V3_Print("Injecting exception %d (EIP=%p)\n", int_info.vector, (void *)(addr_t)info->rip);
 741 #endif
 742         check_vmcs_write(VMCS_ENTRY_INT_INFO, int_info.value);
 743
 744         v3_injecting_excp(info, int_info.vector);
 745
 746     } else if ((((struct rflags *)&(info->ctrl_regs.rflags))->intr == 1) &&
 747                (intr_core_state.val == 0)) {
 748
 749         if ((info->intr_core_state.irq_started == 1) && (idt_vec_info.valid == 1)) {
 750
 751 #ifdef V3_CONFIG_DEBUG_INTERRUPTS
 752             V3_Print("IRQ pending from previous injection\n");
 753 #endif
 754
 755             // Copy the IDT vectoring info over to reinject the old interrupt
 756             if (idt_vec_info.error_code == 1) {
 757                 uint32_t err_code = 0;
 758
 759                 check_vmcs_read(VMCS_IDT_VECTOR_ERR, &err_code);
 760                 check_vmcs_write(VMCS_ENTRY_EXCP_ERR, err_code);
 761             }
 762
 763             idt_vec_info.undef = 0;
 764             check_vmcs_write(VMCS_ENTRY_INT_INFO, idt_vec_info.value);
 765
 766         } else {
 767             struct vmx_entry_int_info ent_int;
 768             ent_int.value = 0;
 769
 770             switch (v3_intr_pending(info)) {
 771                 case V3_EXTERNAL_IRQ: {
 772                     info->intr_core_state.irq_vector = v3_get_intr(info);
 773                     ent_int.vector = info->intr_core_state.irq_vector;
 774                     ent_int.type = 0;
 775                     ent_int.error_code = 0;
 776                     ent_int.valid = 1;
 777
 778 #ifdef V3_CONFIG_DEBUG_INTERRUPTS
 779                     V3_Print("Injecting Interrupt %d at exit %u(EIP=%p)\n",
 780                                info->intr_core_state.irq_vector,
 781                                (uint32_t)info->num_exits,
 782                                (void *)(addr_t)info->rip);
 783 #endif
 784
 785                     check_vmcs_write(VMCS_ENTRY_INT_INFO, ent_int.value);
 786                     info->intr_core_state.irq_started = 1;
 787
 788                     break;
 789                 }
 790                 case V3_NMI:
 791                     PrintDebug("Injecting NMI\n");
 792
 793                     ent_int.type = 2;
 794                     ent_int.vector = 2;
 795                     ent_int.valid = 1;
 796                     check_vmcs_write(VMCS_ENTRY_INT_INFO, ent_int.value);
 797
 798                     break;
 799                 case V3_SOFTWARE_INTR:
 800                     PrintDebug("Injecting software interrupt\n");
 801                     ent_int.type = 4;
 802
 803                     ent_int.valid = 1;
 804                     check_vmcs_write(VMCS_ENTRY_INT_INFO, ent_int.value);
 805
 806                     break;
 807                 case V3_VIRTUAL_IRQ:
 808                     // Not sure what to do here, Intel doesn't have virtual IRQs
 809                     // May be the same as external interrupts/IRQs
 810
 811                     break;
 812                 case V3_INVALID_INTR:
 813                 default:
 814                     break;
 815             }
 816         }
 817     } else if ((v3_intr_pending(info)) && (vmx_info->pri_proc_ctrls.int_wndw_exit == 0)) {
 818         // Enable INTR window exiting so we know when IF=1
 819         uint32_t instr_len;
 820
 821         check_vmcs_read(VMCS_EXIT_INSTR_LEN, &instr_len);
 822
 823 #ifdef V3_CONFIG_DEBUG_INTERRUPTS
 824         V3_Print("Enabling Interrupt-Window exiting: %d\n", instr_len);
 825 #endif
 826
 827         vmx_info->pri_proc_ctrls.int_wndw_exit = 1;
 828         check_vmcs_write(VMCS_PROC_CTRLS, vmx_info->pri_proc_ctrls.value);
 829     }
 830
 831
 832     return 0;
 833 }
 834
 835
 836
 837 static struct vmx_exit_info exit_log[10];
 838 static uint64_t rip_log[10];
 839
 840
 841
 842 static void print_exit_log(struct guest_info * info) {
 843     int cnt = info->num_exits % 10;
 844     int i = 0;
 845
 846
 847     V3_Print("\nExit Log (%d total exits):\n", (uint32_t)info->num_exits);
 848
 849     for (i = 0; i < 10; i++) {
 850         struct vmx_exit_info * tmp = &exit_log[cnt];
 851
 852         V3_Print("%d:\texit_reason = %p\n", i, (void *)(addr_t)tmp->exit_reason);
 853         V3_Print("\texit_qual = %p\n", (void *)tmp->exit_qual);
 854         V3_Print("\tint_info = %p\n", (void *)(addr_t)tmp->int_info);
 855         V3_Print("\tint_err = %p\n", (void *)(addr_t)tmp->int_err);
 856         V3_Print("\tinstr_info = %p\n", (void *)(addr_t)tmp->instr_info);
 857         V3_Print("\tguest_linear_addr= %p\n", (void *)(addr_t)tmp->guest_linear_addr);
 858         V3_Print("\tRIP = %p\n", (void *)rip_log[cnt]);
 859
 860
 861         cnt--;
 862
 863         if (cnt == -1) {
 864             cnt = 9;
 865         }
 866
 867     }
 868
 869 }
 870
 871 int
 872 v3_vmx_config_tsc_virtualization(struct guest_info * info) {
 873     struct vmx_data * vmx_info = (struct vmx_data *)(info->vmm_data);
 874
 875     if (info->time_state.flags & VM_TIME_TRAP_RDTSC) {
 876         if  (!vmx_info->pri_proc_ctrls.rdtsc_exit) {
 877             vmx_info->pri_proc_ctrls.rdtsc_exit = 1;
 878             check_vmcs_write(VMCS_PROC_CTRLS, vmx_info->pri_proc_ctrls.value);
 879         }
 880     } else {
 881         sint64_t tsc_offset;
 882         uint32_t tsc_offset_low, tsc_offset_high;
 883
 884         if  (vmx_info->pri_proc_ctrls.rdtsc_exit) {
 885             vmx_info->pri_proc_ctrls.rdtsc_exit = 0;
 886             check_vmcs_write(VMCS_PROC_CTRLS, vmx_info->pri_proc_ctrls.value);
 887         }
 888
 889         if (info->time_state.flags & VM_TIME_TSC_PASSTHROUGH) {
 890             tsc_offset = 0;
 891         } else {
 892             tsc_offset = v3_tsc_host_offset(&info->time_state);
 893         }
 894         tsc_offset_high = (uint32_t)(( tsc_offset >> 32) & 0xffffffff);
 895         tsc_offset_low = (uint32_t)(tsc_offset & 0xffffffff);
 896
 897         check_vmcs_write(VMCS_TSC_OFFSET_HIGH, tsc_offset_high);
 898         check_vmcs_write(VMCS_TSC_OFFSET, tsc_offset_low);
 899     }
 900     return 0;
 901 }
 902
 903 /*
 904  * CAUTION and DANGER!!!
 905  *
 906  * The VMCS CANNOT(!!) be accessed outside of the cli/sti calls inside this function
 907  * When exectuing a symbiotic call, the VMCS WILL be overwritten, so any dependencies
 908  * on its contents will cause things to break. The contents at the time of the exit WILL
 909  * change before the exit handler is executed.
 910  */
 911 int v3_vmx_enter(struct guest_info * info) {
 912     int ret = 0;
 913     struct vmx_exit_info exit_info;
 914     struct vmx_data * vmx_info = (struct vmx_data *)(info->vmm_data);
 915     uint64_t guest_cycles = 0;
 916
 917     // Conditionally yield the CPU if the timeslice has expired
 918     v3_yield_cond(info);
 919
 920     // Update timer devices late after being in the VM so that as much
 921     // of the time in the VM is accounted for as possible. Also do it before
 922     // updating IRQ entry state so that any interrupts the timers raise get
 923     // handled on the next VM entry.
 924     v3_advance_time(info, NULL);
 925     v3_update_timers(info);
 926
 927     // disable global interrupts for vm state transition
 928     v3_disable_ints();
 929
 930     if (vmcs_store() != vmx_info->vmcs_ptr_phys) {
 931         vmcs_clear(vmx_info->vmcs_ptr_phys);
 932         vmcs_load(vmx_info->vmcs_ptr_phys);
 933         vmx_info->state = VMX_UNLAUNCHED;
 934     }
 935
 936     v3_vmx_restore_vmcs(info);
 937
 938
 939 #ifdef V3_CONFIG_SYMCALL
 940     if (info->sym_core_state.symcall_state.sym_call_active == 0) {
 941         update_irq_entry_state(info);
 942     }
 943 #else
 944     update_irq_entry_state(info);
 945 #endif
 946
 947     {
 948         addr_t guest_cr3;
 949         vmcs_read(VMCS_GUEST_CR3, &guest_cr3);
 950         vmcs_write(VMCS_GUEST_CR3, guest_cr3);
 951     }
 952
 953
 954     // Perform last-minute time setup prior to entering the VM
 955     v3_vmx_config_tsc_virtualization(info);
 956
 957     if (v3_update_vmcs_host_state(info)) {
 958         v3_enable_ints();
 959         PrintError("Could not write host state\n");
 960         return -1;
 961     }
 962
 963     if (vmx_info->pin_ctrls.active_preempt_timer) {
 964         /* Preemption timer is active */
 965         uint32_t preempt_window = 0xffffffff;
 966
 967         if (info->timeouts.timeout_active) {
 968             preempt_window = info->timeouts.next_timeout;
 969         }
 970
 971         check_vmcs_write(VMCS_PREEMPT_TIMER, preempt_window);
 972     }
 973
 974
 975     {
 976         uint64_t entry_tsc = 0;
 977         uint64_t exit_tsc = 0;
 978
 979         if (vmx_info->state == VMX_UNLAUNCHED) {
 980             vmx_info->state = VMX_LAUNCHED;
 981             rdtscll(entry_tsc);
 982             ret = v3_vmx_launch(&(info->vm_regs), info, &(info->ctrl_regs));
 983             rdtscll(exit_tsc);
 984
 985         } else {
 986             V3_ASSERT(vmx_info->state != VMX_UNLAUNCHED);
 987             rdtscll(entry_tsc);
 988             ret = v3_vmx_resume(&(info->vm_regs), info, &(info->ctrl_regs));
 989             rdtscll(exit_tsc);
 990         }
 991
 992         guest_cycles = exit_tsc - entry_tsc;
 993     }
 994
 995     //  PrintDebug("VMX Exit: ret=%d\n", ret);
 996
 997     if (ret != VMX_SUCCESS) {
 998         uint32_t error = 0;
 999         vmcs_read(VMCS_INSTR_ERR, &error);
1000
1001         v3_enable_ints();
1002
1003         PrintError("VMENTRY Error: %d (launch_ret = %d)\n", error, ret);
1004         return -1;
1005     }
1006
1007
1008     info->num_exits++;
1009
1010     /* If we have the preemption time, then use it to get more accurate guest time */
1011     if (vmx_info->pin_ctrls.active_preempt_timer) {
1012         uint32_t cycles_left = 0;
1013         check_vmcs_read(VMCS_PREEMPT_TIMER, &(cycles_left));
1014
1015         if (info->timeouts.timeout_active) {
1016             guest_cycles = info->timeouts.next_timeout - cycles_left;
1017         } else {
1018             guest_cycles = 0xffffffff - cycles_left;
1019         }
1020     }
1021
1022     // Immediate exit from VM time bookkeeping
1023     v3_advance_time(info, &guest_cycles);
1024
1025     /* Update guest state */
1026     v3_vmx_save_vmcs(info);
1027
1028     // info->cpl = info->segments.cs.selector & 0x3;
1029
1030     info->mem_mode = v3_get_vm_mem_mode(info);
1031     info->cpu_mode = v3_get_vm_cpu_mode(info);
1032
1033
1034
1035     check_vmcs_read(VMCS_EXIT_INSTR_LEN, &(exit_info.instr_len));
1036     check_vmcs_read(VMCS_EXIT_INSTR_INFO, &(exit_info.instr_info));
1037     check_vmcs_read(VMCS_EXIT_REASON, &(exit_info.exit_reason));
1038     check_vmcs_read(VMCS_EXIT_QUAL, &(exit_info.exit_qual));
1039     check_vmcs_read(VMCS_EXIT_INT_INFO, &(exit_info.int_info));
1040     check_vmcs_read(VMCS_EXIT_INT_ERR, &(exit_info.int_err));
1041     check_vmcs_read(VMCS_GUEST_LINEAR_ADDR, &(exit_info.guest_linear_addr));
1042
1043     if (info->shdw_pg_mode == NESTED_PAGING) {
1044         check_vmcs_read(VMCS_GUEST_PHYS_ADDR, &(exit_info.ept_fault_addr));
1045     }
1046
1047     //PrintDebug("VMX Exit taken, id-qual: %u-%lu\n", exit_info.exit_reason, exit_info.exit_qual);
1048
1049     exit_log[info->num_exits % 10] = exit_info;
1050     rip_log[info->num_exits % 10] = get_addr_linear(info, info->rip, &(info->segments.cs));
1051
1052 #ifdef V3_CONFIG_SYMCALL
1053     if (info->sym_core_state.symcall_state.sym_call_active == 0) {
1054         update_irq_exit_state(info);
1055     }
1056 #else
1057     update_irq_exit_state(info);
1058 #endif
1059
1060     if (exit_info.exit_reason == VMX_EXIT_INTR_WINDOW) {
1061         // This is a special case whose only job is to inject an interrupt
1062         vmcs_read(VMCS_PROC_CTRLS, &(vmx_info->pri_proc_ctrls.value));
1063         vmx_info->pri_proc_ctrls.int_wndw_exit = 0;
1064         vmcs_write(VMCS_PROC_CTRLS, vmx_info->pri_proc_ctrls.value);
1065
1066 #ifdef V3_CONFIG_DEBUG_INTERRUPTS
1067        V3_Print("Interrupts available again! (RIP=%llx)\n", info->rip);
1068 #endif
1069     }
1070
1071     // reenable global interrupts after vm exit
1072     v3_enable_ints();
1073
1074     // Conditionally yield the CPU if the timeslice has expired
1075     v3_yield_cond(info);
1076     v3_advance_time(info, NULL);
1077     v3_update_timers(info);
1078
1079     if (v3_handle_vmx_exit(info, &exit_info) == -1) {
1080         PrintError("Error in VMX exit handler (Exit reason=%x)\n", exit_info.exit_reason);
1081         return -1;
1082     }
1083
1084     if (info->timeouts.timeout_active) {
1085         /* Check to see if any timeouts have expired */
1086         v3_handle_timeouts(info, guest_cycles);
1087     }
1088
1089     return 0;
1090 }
1091
1092
1093 int v3_start_vmx_guest(struct guest_info * info) {
1094
1095     PrintDebug("Starting VMX core %u\n", info->vcpu_id);
1096
1097     if (info->vcpu_id == 0) {
1098         info->core_run_state = CORE_RUNNING;
1099     } else {
1100
1101         PrintDebug("VMX core %u: Waiting for core initialization\n", info->vcpu_id);
1102
1103         while (info->core_run_state == CORE_STOPPED) {
1104
1105             if (info->vm_info->run_state == VM_STOPPED) {
1106                 // The VM was stopped before this core was initialized.
1107                 return 0;
1108             }
1109
1110             v3_yield(info);
1111             //PrintDebug("VMX core %u: still waiting for INIT\n",info->vcpu_id);
1112         }
1113
1114         PrintDebug("VMX core %u initialized\n", info->vcpu_id);
1115
1116         // We'll be paranoid about race conditions here
1117         v3_wait_at_barrier(info);
1118     }
1119
1120
1121     PrintDebug("VMX core %u: I am starting at CS=0x%x (base=0x%p, limit=0x%x),  RIP=0x%p\n",
1122                info->vcpu_id, info->segments.cs.selector, (void *)(info->segments.cs.base),
1123                info->segments.cs.limit, (void *)(info->rip));
1124
1125
1126     PrintDebug("VMX core %u: Launching VMX VM on logical core %u\n", info->vcpu_id, info->pcpu_id);
1127
1128     v3_start_time(info);
1129
1130     while (1) {
1131
1132         if (info->vm_info->run_state == VM_STOPPED) {
1133             info->core_run_state = CORE_STOPPED;
1134             break;
1135         }
1136
1137         if (v3_vmx_enter(info) == -1) {
1138
1139             addr_t host_addr;
1140             addr_t linear_addr = 0;
1141
1142             info->vm_info->run_state = VM_ERROR;
1143
1144             V3_Print("VMX core %u: VMX ERROR!!\n", info->vcpu_id);
1145
1146             v3_print_guest_state(info);
1147
1148             V3_Print("VMX core %u\n", info->vcpu_id);
1149
1150             linear_addr = get_addr_linear(info, info->rip, &(info->segments.cs));
1151
1152             if (info->mem_mode == PHYSICAL_MEM) {
1153                 v3_gpa_to_hva(info, linear_addr, &host_addr);
1154             } else if (info->mem_mode == VIRTUAL_MEM) {
1155                 v3_gva_to_hva(info, linear_addr, &host_addr);
1156             }
1157
1158             V3_Print("VMX core %u: Host Address of rip = 0x%p\n", info->vcpu_id, (void *)host_addr);
1159
1160             V3_Print("VMX core %u: Instr (15 bytes) at %p:\n", info->vcpu_id, (void *)host_addr);
1161             v3_dump_mem((uint8_t *)host_addr, 15);
1162
1163             v3_print_stack(info);
1164
1165
1166             v3_print_vmcs();
1167             print_exit_log(info);
1168             return -1;
1169         }
1170
1171         v3_wait_at_barrier(info);
1172
1173
1174         if (info->vm_info->run_state == VM_STOPPED) {
1175             info->core_run_state = CORE_STOPPED;
1176             break;
1177         }
1178 /*
1179         if ((info->num_exits % 5000) == 0) {
1180             V3_Print("VMX Exit number %d\n", (uint32_t)info->num_exits);
1181         }
1182 */
1183
1184     }
1185
1186     return 0;
1187 }
1188
1189
1190
1191
1192 #define VMX_FEATURE_CONTROL_MSR     0x0000003a
1193 #define CPUID_VMX_FEATURES 0x00000005  /* LOCK and VMXON */
1194 #define CPUID_1_ECX_VTXFLAG 0x00000020
1195
1196 int v3_is_vmx_capable() {
1197     v3_msr_t feature_msr;
1198     uint32_t eax = 0, ebx = 0, ecx = 0, edx = 0;
1199
1200     v3_cpuid(0x1, &eax, &ebx, &ecx, &edx);
1201
1202     PrintDebug("ECX: 0x%x\n", ecx);
1203
1204     if (ecx & CPUID_1_ECX_VTXFLAG) {
1205         v3_get_msr(VMX_FEATURE_CONTROL_MSR, &(feature_msr.hi), &(feature_msr.lo));
1206
1207         PrintDebug("MSRREGlow: 0x%.8x\n", feature_msr.lo);
1208
1209         if ((feature_msr.lo & CPUID_VMX_FEATURES) != CPUID_VMX_FEATURES) {
1210             PrintDebug("VMX is locked -- enable in the BIOS\n");
1211             return 0;
1212         }
1213
1214     } else {
1215         PrintDebug("VMX not supported on this cpu\n");
1216         return 0;
1217     }
1218
1219     return 1;
1220 }
1221
1222
1223 int v3_reset_vmx_vm_core(struct guest_info * core, addr_t rip) {
1224     // init vmcs bios
1225
1226     if ((core->shdw_pg_mode == NESTED_PAGING) &&
1227         (v3_mach_type == V3_VMX_EPT_UG_CPU)) {
1228         // easy
1229         core->rip = 0;
1230         core->segments.cs.selector = rip << 8;
1231         core->segments.cs.limit = 0xffff;
1232         core->segments.cs.base = rip << 12;
1233     } else {
1234         core->vm_regs.rdx = core->vcpu_id;
1235         core->vm_regs.rbx = rip;
1236     }
1237
1238     return 0;
1239 }
1240
1241
1242
1243 void v3_init_vmx_cpu(int cpu_id) {
1244     addr_t vmx_on_region = 0;
1245     extern v3_cpu_arch_t v3_mach_type;
1246     extern v3_cpu_arch_t v3_cpu_types[];
1247
1248     if (v3_mach_type == V3_INVALID_CPU) {
1249         if (v3_init_vmx_hw(&hw_info) == -1) {
1250             PrintError("Could not initialize VMX hardware features on cpu %d\n", cpu_id);
1251             return;
1252         }
1253     }
1254
1255     enable_vmx();
1256
1257
1258     // Setup VMXON Region
1259     vmx_on_region = allocate_vmcs();
1260
1261
1262     if (vmx_on(vmx_on_region) == VMX_SUCCESS) {
1263         V3_Print("VMX Enabled\n");
1264         host_vmcs_ptrs[cpu_id] = vmx_on_region;
1265     } else {
1266         V3_Print("VMX already enabled\n");
1267         V3_FreePages((void *)vmx_on_region, 1);
1268     }
1269
1270     PrintDebug("VMXON pointer: 0x%p\n", (void *)host_vmcs_ptrs[cpu_id]);
1271
1272     {
1273         struct vmx_sec_proc_ctrls sec_proc_ctrls;
1274         sec_proc_ctrls.value = v3_vmx_get_ctrl_features(&(hw_info.sec_proc_ctrls));
1275
1276         if (sec_proc_ctrls.enable_ept == 0) {
1277             V3_Print("VMX EPT (Nested) Paging not supported\n");
1278             v3_cpu_types[cpu_id] = V3_VMX_CPU;
1279         } else if (sec_proc_ctrls.unrstrct_guest == 0) {
1280             V3_Print("VMX EPT (Nested) Paging supported\n");
1281             v3_cpu_types[cpu_id] = V3_VMX_EPT_CPU;
1282         } else {
1283             V3_Print("VMX EPT (Nested) Paging + Unrestricted guest supported\n");
1284             v3_cpu_types[cpu_id] = V3_VMX_EPT_UG_CPU;
1285         }
1286     }
1287
1288 }
1289
1290
1291 void v3_deinit_vmx_cpu(int cpu_id) {
1292     extern v3_cpu_arch_t v3_cpu_types[];
1293     v3_cpu_types[cpu_id] = V3_INVALID_CPU;
1294
1295     if (host_vmcs_ptrs[cpu_id] != 0) {
1296         V3_Print("Disabling VMX\n");
1297
1298         if (vmx_off() != VMX_SUCCESS) {
1299             PrintError("Error executing VMXOFF\n");
1300         }
1301
1302         V3_FreePages((void *)host_vmcs_ptrs[cpu_id], 1);
1303
1304         host_vmcs_ptrs[cpu_id] = 0;
1305     }
1306 }