1 # Makefile for GeekOS kernel, userspace, and tools
2 # Copyright (c) 2004,2005 David H. Hovemeyer <daveho@cs.umd.edu>
5 # This is free software. You are permitted to use,
6 # redistribute, and modify it as specified in the file "COPYING".
8 # Required software to build GeekOS:
9 # - GNU Make (http://www.gnu.org/software/make)
10 # - gcc 2.95.2 generating code for target (i386/ELF) and host platforms
11 # - nasm (http://nasm.sourceforge.net)
12 # - Perl5, AWK (any version), egrep
14 # Cygwin (http://cygwin.com) may be used to build GeekOS.
15 # Make sure that gcc, binutils, nasm, and perl are installed.
18 # - This makefile has been written carefully to work correctly
19 # with the -j (parallel make) option. I regularly use "make -j 2"
20 # to speed the build process on 2 processor systems.
24 # THESE MUST MATCH WHAT IS DEFINED IN defs.h and defs.asm exactly
25 # MUST BE INTEGRAL NUMBER OF PAGES
26 TOP_OF_MEM := 0x40000000
31 # THE KERNEL, SETUP, BOOTPACKAGE MUST BE SMALLER THAN THIS
32 # MUST BE INTEGRAL NUMBER OF PAGES
36 # Base address of kernel
38 # Note: at top of memory minus three pages (GDT/TSS/IDT)
42 # Note that the code will initially load at 0x10000
44 # The setup code needs to copy it up to this address and jump there
46 KERNEL_BASE_ADDR := $(shell perl -e 'print sprintf("0x%x",$(TOP_OF_MEM)-4096*3-$(MAX_VMM));')
48 # Kernel entry point function
49 KERNEL_ENTRY = $(SYM_PFX)Main
53 VPATH := $(PROJECT_ROOT)/src
55 #when -DNDEBUG is set the kassert functions are disabled
57 JRLDEBUG= -DSERIAL_PRINT_DEBUG=1 -DSERIAL_PRINT_DEBUG_LEVEL=1000 -DSERIAL_PRINT=1
61 #Peter's compile flags
62 PADFLAGS = -DMAX_VMM=$(MAX_VMM)
64 # Figure out if we're compiling with cygwin, http://cygwin.com
65 SYSTEM_NAME := $(shell uname -s)
66 ifeq ($(findstring CYGWIN,$(SYSTEM_NAME)),CYGWIN)
68 EXTRA_C_OPTS := -DNEED_UNDERSCORE -DGNU_WIN32
69 EXTRA_NASM_OPTS := -DNEED_UNDERSCORE
71 EXTRA_CC_USER_OPTS := -Dmain=geekos_main
74 VMM_SIZES = ../include/geekos/vmm_sizes.h
77 # ----------------------------------------------------------------------
79 # Various options specifying how GeekOS should be built,
80 # what source files to build, which user programs to build,
81 # etc. This is generally the only section of the makefile
82 # that will need to be modified.
83 # ----------------------------------------------------------------------
85 # List of targets to build by default.
86 # These targets encompass everything needed to boot
88 ALL_TARGETS := fd.img rombios vgabios vmxassist
92 KERNEL_C_SRCS := idt.c int.c trap.c irq.c io.c \
93 keyboard.c screen.c timer.c \
95 gdt.c tss.c segment.c \
99 paging.c vmx.c vmcs_gen.c vmcs.c\
102 # Kernel object files built from C source files
103 KERNEL_C_OBJS := $(KERNEL_C_SRCS:%.c=geekos/%.o)
105 # Kernel assembly files
106 KERNEL_ASM_SRCS := lowlevel.asm vmx_lowlevel.asm
108 KERNEL_GAS_SRCS := testvm.s
110 # Kernel object files build from assembler source files
111 KERNEL_ASM_OBJS := $(KERNEL_ASM_SRCS:%.asm=geekos/%.o)
113 KERNEL_GAS_OBJS := $(KERNEL_GAS_SRCS:%.s=geekos/%.o)
116 # All kernel object files
117 KERNEL_OBJS := $(KERNEL_C_OBJS) \
118 $(KERNEL_ASM_OBJS) $(KERNEL_GAS_OBJS)
120 # Common library source files.
121 # This library is linked into both the kernel and user programs.
122 # It provides string functions and generic printf()-style
124 COMMON_C_SRCS := fmtout.c string.c memmove.c
126 # Common library object files.
127 COMMON_C_OBJS := $(COMMON_C_SRCS:%.c=common/%.o)
132 # ----------------------------------------------------------------------
134 # This section defines programs that are used to build GeekOS.
135 # ----------------------------------------------------------------------
137 # Uncomment if cross compiling
138 #TARGET_CC_PREFIX := i386-elf-
140 # Target C compiler. gcc 2.95.2 or later should work.
141 TARGET_CC := $(TARGET_CC_PREFIX)gcc
143 # Host C compiler. This is used to compile programs to execute on
144 # the host platform, not the target (x86) platform. On x86/ELF
145 # systems, such as Linux and FreeBSD, it can generally be the same
146 # as the target C compiler.
149 # Target linker. GNU ld is probably to only one that will work.
150 TARGET_LD := $(TARGET_CC_PREFIX)ld
153 TARGET_AR := $(TARGET_CC_PREFIX)ar
156 TARGET_RANLIB := $(TARGET_CC_PREFIX)ranlib
159 TARGET_NM := $(TARGET_CC_PREFIX)nm
162 TARGET_OBJCOPY := $(TARGET_CC_PREFIX)objcopy
164 # Nasm (http://nasm.sourceforge.net)
165 NASM := /usr/local/nasm-vmx/bin/nasm
169 # Tool to build PFAT filesystem images.
170 BUILDFAT := tools/builtFat.exe
175 # Pad a file so its size is a multiple of some unit (i.e., sector size)
176 PAD := $(PERL) $(PROJECT_ROOT)/scripts/pad
178 # Create a file filled with zeroes.
179 ZEROFILE := $(PERL) $(PROJECT_ROOT)/scripts/zerofile
181 # Calculate size of file in sectors
182 NUMSECS := $(PERL) $(PROJECT_ROOT)/scripts/numsecs
185 # ----------------------------------------------------------------------
187 # Options passed to the tools.
188 # ----------------------------------------------------------------------
190 # Flags used for all C source files
191 GENERAL_OPTS := -O -Wall $(EXTRA_C_OPTS) $(JRLDEBUG) $(PADFLAGS)
192 CC_GENERAL_OPTS := $(GENERAL_OPTS) -Werror
194 # Flags used for kernel C source files
195 CC_KERNEL_OPTS := -g -DGEEKOS -I$(PROJECT_ROOT)/include
197 # Flags user for kernel assembly files
198 NASM_KERNEL_OPTS := -I$(PROJECT_ROOT)/src/geekos/ -f elf $(EXTRA_NASM_OPTS)
200 # Flags used for common library and libc source files
201 CC_USER_OPTS := -I$(PROJECT_ROOT)/include -I$(PROJECT_ROOT)/include/libc \
202 $(EXTRA_CC_USER_OPTS)
204 # Flags passed to objcopy program (strip unnecessary sections from kernel.exe)
205 OBJCOPY_FLAGS := -R .dynamic -R .note -R .comment
207 # ----------------------------------------------------------------------
209 # Describes how to compile the source files.
210 # ----------------------------------------------------------------------
212 # Compilation of kernel C source files
214 geekos/%.o : geekos/%.c
215 $(TARGET_CC) -c $(CC_GENERAL_OPTS) $(CC_KERNEL_OPTS) $< -o geekos/$*.o
218 # Compilation of kernel assembly source files
219 geekos/%.o : geekos/%.asm
220 $(NASM) $(NASM_KERNEL_OPTS) $< -o geekos/$*.o
222 # Compilation of test VM
223 geekos/%.o : geekos/%.s
224 $(AS) $< -o geekos/$*.o
226 geekos/%.o : geekos/%.S
227 $(TARGET_CC) -c $(CC_GENERAL_OPTS) $(CC_KERNEL_OPTS) $< -o geekos/$*.o
229 # Compilation of common library C source files
230 common/%.o : common/%.c
231 $(TARGET_CC) -c $(CC_GENERAL_OPTS) $(CC_USER_OPTS) $< -o common/$*.o
233 # ----------------------------------------------------------------------
235 # Specifies files to be built
236 # ----------------------------------------------------------------------
238 # Default target - see definition of ALL_TARGETS in Configuration section
242 geekos/vmx_lowlevel.o: $(PROJECT_ROOT)/src/geekos/vmx_lowlevel.asm
245 -I$(PROJECT_ROOT)/src/geekos/ \
246 $(PROJECT_ROOT)/src/geekos/vmx_lowlevel.asm \
250 geekos/test: geekos/test.o geekos/vmcs.o geekos/vmx_lowlevel.o
251 $(CC) geekos/test.o geekos/vmcs.o geekos/vmx_lowlevel.o -o geekos/test
253 # Standard floppy image - just boots the kernel
254 fd.img : geekos/fd_boot.bin geekos/setup.bin geekos/kernel.bin rombios vgabios vmxassist
255 cat geekos/fd_boot.bin geekos/setup.bin geekos/kernel.bin > _temp
257 # Note - second copy of rombios is intentional
258 cat _temp rombios vgabios vmxassist rombios > $@
260 # make ready to boot over PXE
262 cp fd.img /tftpboot/geekos.img
263 $(PAD) /tftpboot/geekos.img 1474560
266 pxe-discovery-pdinda: fd.img
268 $(PAD) geekos.img 1474560
269 /usr/local/vmm-util/pxe_cp geekos.img
270 /usr/local/vmm-util/tty_perm pdinda
271 echo "Copied file to PXE boot area and set serial permissions for pdinda"
274 pxe-discovery-bjp600: fd.img
276 $(PAD) geekos.img 1474560
277 /usr/local/vmm-util/pxe_cp geekos.img
278 /usr/local/vmm-util/tty_perm bjp600
279 echo "Copied file to PXE boot area and set serial permissions for pdinda"
282 # Floppy boot sector (first stage boot loader).
283 geekos/fd_boot.bin : geekos/setup.bin geekos/kernel.bin $(PROJECT_ROOT)/src/geekos/fd_boot.asm rombios vgabios vmxassist
285 -I$(PROJECT_ROOT)/src/geekos/ \
286 -DNUM_SETUP_SECTORS=`$(NUMSECS) geekos/setup.bin` \
287 -DNUM_KERN_SECTORS=`$(NUMSECS) geekos/kernel.bin` \
288 -DNUM_BIOS_SECTORS=`$(NUMSECS) rombios` \
289 -DNUM_VGA_BIOS_SECTORS=`$(NUMSECS) vgabios` \
290 -DNUM_VMXASSIST_SECTORS=`$(NUMSECS) vmxassist` \
291 $(PROJECT_ROOT)/src/geekos/fd_boot.asm \
294 # Setup program (second stage boot loader).
295 geekos/setup.bin : geekos/kernel.exe $(PROJECT_ROOT)/src/geekos/setup.asm
297 -I$(PROJECT_ROOT)/src/geekos/ \
298 -DENTRY_POINT=0x`egrep 'Main$$' geekos/kernel.syms |awk '{print $$1}'` \
299 -DVMM_FINAL_ADDR=$(KERNEL_BASE_ADDR) \
300 -DVMM_SIZE=$(MAX_VMM) \
301 $(PROJECT_ROOT)/src/geekos/setup.asm \
305 # Loadable (flat) kernel image.
306 geekos/kernel.bin : geekos/kernel.exe
307 $(TARGET_OBJCOPY) $(OBJCOPY_FLAGS) -S -O binary geekos/kernel.exe geekos/kernel.bin
310 # The kernel executable and symbol map.
311 geekos/kernel.exe : $(KERNEL_OBJS) $(COMMON_C_OBJS)
312 $(TARGET_LD) -o geekos/kernel.exe -Ttext $(KERNEL_BASE_ADDR) -e $(KERNEL_ENTRY) \
313 $(KERNEL_OBJS) $(COMMON_C_OBJS)
314 $(TARGET_NM) geekos/kernel.exe > geekos/kernel.syms
317 generate_sizes: force
318 echo "#ifndef __vmm_sizes" > $(VMM_SIZES)
319 echo "#define __vmm_sizes" >> $(VMM_SIZES)
320 echo "#define KERNEL_LOAD_ADDRESS " $(KERNEL_BASE_ADDR) >> $(VMM_SIZES)
321 echo "#define KERNEL_SETUP_LENGTH (" `$(NUMSECS) geekos/setup.bin` "*512)" >> $(VMM_SIZES)
322 echo "#define KERNEL_CORE_LENGTH (" `$(NUMSECS) geekos/kernel.bin` "*512)" >> $(VMM_SIZES)
323 echo "#define KERNEL_START (KERNEL_LOAD_ADDRESS)" >> $(VMM_SIZES)
324 echo "#define KERNEL_END (KERNEL_LOAD_ADDRESS+KERNEL_CORE_LENGTH-1)" >> $(VMM_SIZES)
325 echo "#define BIOS_LENGTH (" `$(NUMSECS) rombios` "*512)" >> $(VMM_SIZES)
326 echo "#define VGA_BIOS_LENGTH (" `$(NUMSECS) vgabios` "*512)" >> $(VMM_SIZES)
327 echo "#define VMXASSIST_LENGTH (" `$(NUMSECS) vmxassist` "*512)" >> $(VMM_SIZES)
328 echo "#define BIOS_START (KERNEL_LOAD_ADDRESS+KERNEL_CORE_LENGTH)" >> $(VMM_SIZES)
329 echo "#define VGA_BIOS_START (BIOS_START+BIOS_LENGTH)" >> $(VMM_SIZES)
330 echo "#define VMXASSIST_START (VGA_BIOS_START+VGA_BIOS_LENGTH)" >> $(VMM_SIZES)
331 echo "//Note this is a second copy of the rom bios for debug" >> $(VMM_SIZES)
332 echo "#define BIOS2_START (VMXASSIST_START+VMXASSIST_LENGTH)" >> $(VMM_SIZES)
333 echo "#define VM_BOOT_PACKAGE_START (BIOS_START) " >> $(VMM_SIZES)
334 echo "#define VM_BOOT_PACKAGE_END (BIOS2_START+BIOS_LENGTH-1) " >> $(VMM_SIZES)
335 echo "#endif" >> $(VMM_SIZES)
337 make_show_sizes: generate_sizes ../src/geekos/show_sizes.c
338 $(HOST_CC) -I../include/geekos ../src/geekos/show_sizes.c -o show_sizes
340 show_sizes: make_show_sizes
344 get_kernel_size: make_show_sizes
351 (cd ../src/vmboot/rombios; make)
352 cp ../src/vmboot/rombios/BIOS-bochs-latest rombios
354 @echo "Rom bios lives at f000:0000 and is" `$(NUMSECS) rombios` "sectors long"
358 (cd ../src/vmboot/vgabios; make)
359 cp ../src/vmboot/vgabios/vgabios.bin vgabios
361 @echo "Vga bios lives at c000:0000 and is" `$(NUMSECS) vgabios` "sectors long"
364 (cd ../src/vmboot/vmxassist; make)
365 cp ../src/vmboot/vmxassist/vmxassist.bin vmxassist
367 @echo "vmxassist lives at d000:0000 and is" `$(NUMSECS) vmxassist` "sectors long"
369 # Clean build directories of generated files
371 rm -f rombios vgabios vmxassist
372 (cd ../src/vmboot/rombios; make clean)
373 (cd ../src/vmboot/vgabios; make clean)
374 (cd ../src/vmboot/vmxassist; make clean)
375 for d in geekos common libc user tools; do \
376 (cd $$d && rm -f *); \
380 # Build header file dependencies, so source files are recompiled when
381 # header files they depend on are modified.
382 depend : $(GENERATED_LIBC_SRCS)
383 $(TARGET_CC) -M $(CC_GENERAL_OPTS) $(CC_KERNEL_OPTS) \
384 $(KERNEL_C_SRCS:%.c=$(PROJECT_ROOT)/src/geekos/%.c) \
385 | $(PERL) -n -e 's,^(\S),geekos/$$1,;print' \
387 $(TARGET_CC) -M $(CC_GENERAL_OPTS) $(CC_USER_OPTS) \
388 $(COMMON_C_SRCS:%.c=$(PROJECT_ROOT)/src/common/%.c) \
389 | $(PERL) -n -e 's,^(\S),common/$$1,;print' \
392 # By default, there are no header file dependencies.